Restored Turntable Thorens Td 320 Mkiii Bicolor Black - GoldThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD320 MKIII in black and gold metallicOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:      YesInner plate: metalSpindle: 7mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Original case professionally painted.Tonearm base goldPlate base black high glossGold underbodyPlate support and decorative cap goldIt is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection terminal for all required cable connections is located on the back.New Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented.Power adapter:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 99 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the re Herstellernummer nicht zutreffend Antriebsart Riemenantrieb Modell TD320 MKII EAN Nicht zutreffend Marke Thorens - restauriert von art-and-sound

Restored Thorens TD 320 MKII Or Mkiii Turntable With Wenge VeneerThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V or 110V/120V (for example USA and world wide) We would also be happy to restore your Thorens to this look. Restored 320 MKII with limit switchexclusive veneer design with high-gloss finishFloor tray matt blackOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. Item description:Please note! Mineral inclusions can be found in the wenge veneer. These can also be seen in the veneer picture (picture 7). This is a natural process and typical of wenge veneers.Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: spikesLimit switch:      YesInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 440mm, depth: 340mm, height 180mm (without hood)Housing:The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.absorber plate:Specially designed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.Level 1: On the top of the base there is integrated vibration absorption using 5 felt absorbers. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized sheet metal tray. Another 4 absorbers are located under the feet of the record player.Level 2: 4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.This double absorption results in a significantly improved sound.Ortofon Vinyl Master Alpha pickup:Very good beginner. Full-fledged pickup that harmonizes with many tonearms. Impresses with temperament and a neutral basic character.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and overheating no longer occur.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:Original Thorens turntable, painted matt blackSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Device feet made of stainless steel 43mm x 17mm (Image 2 and 3): 90 Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Ortofon Quintet Red (elliptical): 330 Ortofon Quintet Blue (elliptical, naked): 470 Ortofon Quintet Bronze (Fineline): 660 Ortofon Quinted Black (Shibata): 940The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD 320 MKII

Your Choice! Restored Turntable Thorens Td 320 MkiiiThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of all housing parts yourself. Also possible in two colors!You can choose the color of all housing parts yourself. Two-tone also possible!Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD320 MKIII in your desired colorOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      YesInner plate: metalSpindle: 7mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Cartridge MC System including installation:AUDIO-TECHNICA AT33SA (Shibata): €799The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. All required cable connections (flex) are located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmissio Herstellernummer nicht zutreffend Antriebsart Riemenantrieb Modell TD320 MKII EAN Nicht zutreffend Marke Thorens - restauriert von art-and-sound

Restored Thorens TD 320 MKII Or Mkiii Turntable With Wenge Veneer GenuineThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V or 110V/120V (for example USA and world wide) We would also be happy to restore your Thorens to this look. Restored 320 MKII with limit switchexclusive veneer design with high-gloss finishFloor tray matt blackOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. Item description:Please note! Mineral inclusions can be found in the wenge veneer. These can also be seen in the veneer picture (picture 7). This is a natural process and typical of wenge veneers.Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: spikesLimit switch:      YesInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 440mm, depth: 340mm, height 180mm (without hood)Housing:The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.absorber plate:Specially designed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.Level 1: On the top of the base there is integrated vibration absorption using 5 felt absorbers. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized sheet metal tray. Another 4 absorbers are located under the feet of the record player.Level 2: 4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.This double absorption results in a significantly improved sound.Ortofon Vinyl Master Alpha pickup:Very good beginner. Full-fledged pickup that harmonizes with many tonearms. Impresses with temperament and a neutral basic character.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and overheating no longer occur.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:Original Thorens turntable, painted matt blackSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Device feet made of stainless steel 43mm x 17mm (Image 2 and 3): 90 Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Ortofon Quintet Red (elliptical): 330 Ortofon Quintet Blue (elliptical, naked): 470 Ortofon Quintet Bronze (Fineline): 660 Ortofon Quinted Black (Shibata): 940The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD 320 MKII

Restored Turntable Thorens Td 320 Mkiii Bicolor Black - GoldThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD320 MKIII in black and gold metallicOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:      YesInner plate: metalSpindle: 7mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Original case professionally painted.Tonearm base goldPlate base black high glossGold underbodyPlate support and decorative cap goldIt is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection terminal for all required cable connections is located on the back.New Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented.Power adapter:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 99 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the re Herstellernummer nicht zutreffend Antriebsart Riemenantrieb Modell TD320 MKII EAN Nicht zutreffend Marke Thorens - restauriert von art-and-sound

Ich verkaufe einige Thorens Ersatzteile: I only ship within the EU. Not to USA UK Australia Russia India Asia... Zarge schwarz holzoptik vom TD 320 MK III ... sehr gut erhalten ANFRAGEN NACH ANDEREN ERSATZTEILEN ODER PREISANGEBOTE BITTE PER MAIL oder telefonisch ab 20:00 Uhr Gewerbliches Angebot. Lieferung erfolgt gem. Fernabsatzgesetz. Siehe Widerrufsbelehrung. Normal 0 21 false false false DE X-NONE X-NONE

Restored Thorens TD 320 MKII Or Mkiii Turntable With Wenge VeneerThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V or 110V/120V (for example USA and world wide) We would also be happy to restore your Thorens to this look. Restored 320 MKII with limit switchexclusive veneer design with high-gloss finishFloor tray matt blackOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. Item description:Please note! Mineral inclusions can be found in the wenge veneer. These can also be seen in the veneer picture (picture 7). This is a natural process and typical of wenge veneers.Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: spikesLimit switch:      YesInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 440mm, depth: 340mm, height 180mm (without hood)Housing:The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.absorber plate:Specially designed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.Level 1: On the top of the base there is integrated vibration absorption using 5 felt absorbers. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized sheet metal tray. Another 4 absorbers are located under the feet of the record player.Level 2: 4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.This double absorption results in a significantly improved sound.Ortofon Vinyl Master Alpha pickup:Very good beginner. Full-fledged pickup that harmonizes with many tonearms. Impresses with temperament and a neutral basic character.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and overheating no longer occur.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:Original Thorens turntable, painted matt blackSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Device feet made of stainless steel 43mm x 17mm (Image 2 and 3): 90 Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Ortofon Quintet Red (elliptical): 330 Ortofon Quintet Blue (elliptical, naked): 470 Ortofon Quintet Bronze (Fineline): 660 Ortofon Quinted Black (Shibata): 940The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD 320 MKII

Restored Thorens TD 320 MKII Or Mkiii Turntable With Wenge Veneer GenuineThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V or 110V/120V (for example USA and world wide) We would also be happy to restore your Thorens to this look. Restored 320 MKII with limit switchexclusive veneer design with high-gloss finishFloor tray matt blackOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. Item description:Please note! Mineral inclusions can be found in the wenge veneer. These can also be seen in the veneer picture (picture 7). This is a natural process and typical of wenge veneers.Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: spikesLimit switch:      YesInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 440mm, depth: 340mm, height 180mm (without hood)Housing:The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.absorber plate:Specially designed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.Level 1: On the top of the base there is integrated vibration absorption using 5 felt absorbers. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized sheet metal tray. Another 4 absorbers are located under the feet of the record player.Level 2: 4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.This double absorption results in a significantly improved sound.Ortofon Vinyl Master Alpha pickup:Very good beginner. Full-fledged pickup that harmonizes with many tonearms. Impresses with temperament and a neutral basic character.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and overheating no longer occur.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:Original Thorens turntable, painted matt blackSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Device feet made of stainless steel 43mm x 17mm (Image 2 and 3): 90 Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Ortofon Quintet Red (elliptical): 330 Ortofon Quintet Blue (elliptical, naked): 470 Ortofon Quintet Bronze (Fineline): 660 Ortofon Quinted Black (Shibata): 940The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD 320 MKII

Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V or 110V/120V (for example USA and world wide) We would be happy to restore your Thorens to this look. Restored 320 MKII with limit switchexclusive veneer design with high-gloss finishFloor tray matt blackOur record players are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. Item description:Please note! Mineral inclusions can be found in the wenge veneer. These can also be seen in the veneer picture (picture 7). This is a natural process and typical of wenge veneers.Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: spikesLimit switch:      YesInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 440mm, depth: 340mm, height 180mm (without hood)Housing:The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.absorber plate:Specially designed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.Level 1: On the top of the base there is integrated vibration absorption using 5 felt absorbers. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized sheet metal tray. Another 4 absorbers are located under the feet of the record player.Level 2: 4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.This double absorption results in a significantly improved sound.Ortofon Vinyl Master Alpha pickup:Very good beginner. Full-fledged pickup that harmonizes with many tonearms. Impresses with temperament and a neutral basic character.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and overheating no longer occur.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:Original Thorens turntable, painted matt blackSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Device feet made of stainless steel 43mm x 17mm (Image 2 and 3): 90 Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Ortofon Quintet Red (elliptical): 330 Ortofon Quintet Blue (elliptical, naked): 470 Ortofon Quintet Bronze (Fineline): 660 Ortofon Quinted Black (Shibata): 940The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the p

Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Cette platine vinyle est disponible en 220/230V ou 110V/120V (par exemple aux États-Unis et dans le monde entier) Nous serions également heureux de redonner à votre Thorens ce look. 320 MKII restauré avec fin de coursedesign de placage exclusif avec finition brillantePlateau de sol noir matNos platines sont assemblées, modifiées et assemblées avec amour à la main. Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage. Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié. Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées. Un dernier test dendurance complète le travail complexe. Description de larticle :Veuillez noter! Des inclusions minérales peuvent être trouvées dans le placage wengé. Ceux-ci sont également visibles sur la photo du placage (photo 7). Il s’agit d’un processus naturel et typique des placages wengé.Ramasser:         Ortofon VinylMaster Alpha (pas comme illustré)Pieds de lappareil : pointesFin de course :      OuiPlaque intérieure : métalBroche:                    10mmDimensions de base :             Largeur : 440 mm, profondeur : 340 mm, hauteur 180 mm (sans capot)Logement:Le logement a été recouvert de placage wengé. Le placage a été découpé en différentes parties de placage et assemblées pour former une image de placage uniforme (miroir). Cette technique est très complexe et impressionne par son aspect unique. La surface est recouverte de plusieurs couches de vernis brillant scellé et poli avec un ponçage intermédiaire approprié.plaque absorbante:Plaque absorbante spécialement conçue. L’absorption des basses fréquences et des vibrations des matériaux s’effectue à deux niveaux.Niveau 1 : Sur le dessus de la base est intégré un système dabsorption des vibrations grâce à 5 absorbeurs en feutre. Un absorbeur est centré sous la plaque de base et élimine les vibrations négatives du plateau en tôle souvent décrié. 4 autres absorbeurs sont situés sous les pieds du tourne-disque.Niveau 2 : 4 pointes réglables en hauteur en acier inoxydable chromé sur la face inférieure de la plaque absorbante.Cette double absorption se traduit par un son nettement amélioré.Micro Ortofon Vinyl Master Alpha:Très bon débutant. Micro à part entière qui sharmonise avec de nombreux bras de lecture. Impressionne par son tempérament et son caractère de base neutre.Grande alimentation :Un nouveau bloc dalimentation est inclus dans la livraison. Cette alimentation a deux fois la puissance de lalimentation dorigine. Les goulets détranglement et la surchauffe ne se produisent plus.Câble audio:Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace.Plaque tournante:Platine vinyle Thorens originale, peinte en noir matPointes en acier inoxydable chromé:Pour que le tourne-disque soit découplé des vibrations basses fréquences, Le châssis est équipé de pointes réglables en hauteur. Les résonances et les retours sont ainsi efficacement évités. Courroie dentraînement :Cette courroie de transmission est fabriquée selon les spécifications dorigine Thorens (même matériau et mêmes dimensions).Poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système.Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères: Hotte avec charnières : 190Pieds dappareil en acier inoxydable 43 mm x 17 mm (Image 2 et 3) : 90 Système à cartouche MM comprenant linstallation :Audio-Technica VM740ML (microlinéaire) : 339Audio-Technica VM750SH (Shibata) : 439Audio-Technica VM760SLC (contact de ligne spécial) : 699 Système MC à cartouche comprenant linstallation :Audio-technica AT-OC9XEB (elliptique) : 279Audio-technica AT-OC9XEN (elliptique, nu) : 369Audio-technica AT33EV (elliptique, nu) : 499Audio-technica ATPTG/II (microlinéaire) : 599Audio-technica AT33SA (Shibata) : 799Ortofon Quintet Rouge (elliptique) : 330 Ortofon Quintet Blue (elliptique, nu) : 470 Ortofon Quintette Bronze (Fineline) : 660 Ortofon Quinted Noir (Shibata) : 940Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace. Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence.

Das Gerät ist Ungetestet da erstenskein Netzteil vorhanden und auch der Anschluss am Gerät fehlt , daher wird es als defekt verkauft. Nur bieten wer damit einverstanden ist. Falls Sie ein Problem mit der Ware haben nach dem Kauf können Sie sich telefonisch oder per Nachricht bei mir melden . Wir finden bestimmt eine Lösung die für beide Seiten optimal ist . Daher bitte vor der Abgabe einer Bewertung bei einem Problemen sich melden. Bilder sind Bestandteil der Artikelbeschreibung. Lieferumfang siehe Bilder. Die Versandkosten beinhalten zudem das Verpackungsmaterial (bitte beachten). BEARBEITUNGSZEIT EINES PAKETES KANN BIS ZU 4 WERKTAGE BETRAGEN!!! Wer mit den Versandkosten nicht einverstanden ist, muss das Gerät nicht kaufen. Wenn Sie ein Problem mit der Ware haben können Sie mich anschreiben und wir finden bestimmt eine optimale Lösung. Wen ein Gerät im Artikelzustand als Ersatzteil/Defekt eingestellt wird , wird es auch ausdrücklich als Ersatzteil beziehungsweise defekt verkauft, daher auch bei ungetesteter Ware , kein funktionsfähiges Gerät erwarten . Versandkosten fürs Ausland bitte Nachfragen. Die Ware unterliegt der Differenzbesteuerung nach UStG. §25a, eine Ausweisung der MwSt. ist nicht möglich.

Restored Turntable Thorens Td 320 Mkiii Bicolor Black - GoldThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD320 MKIII in black and gold metallicOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:      YesInner plate: metalSpindle: 7mm Basic dimensions:            Width: 44cm, depth: 34cm, height approx. 15cmHousing:Original case professionally painted.Tonearm base goldPlate base black high glossGold underbodyPlate support and decorative cap goldIt is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection terminal for all required cable connections is located on the back.New Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented.Power adapter:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply.Performance bottlenecks and heating no longer occur. Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red Verso (elliptical): 99 Ortofon 2M Blue Verso (elliptical, naked): 240 Ortofon 2M Bronze Verso (Fineline): 390Ortofon 2M Black Verso (Shibata): 599Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799 Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the re Herstellernummer nicht zutreffend Antriebsart Riemenantrieb Modell TD320 MKII EAN Nicht zutreffend Marke Thorens - restauriert von art-and-sound

Restored Thorens TD 320 MKII Or Mkiii Turntable With Wenge VeneerThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V or 110V/120V (for example USA and world wide) We would also be happy to restore your Thorens to this look. Restored 320 MKII with limit switchexclusive veneer design with high-gloss finishFloor tray matt blackOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. Item description:Please note! Mineral inclusions can be found in the wenge veneer. These can also be seen in the veneer picture (picture 7). This is a natural process and typical of wenge veneers.Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: spikesLimit switch:      YesInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 440mm, depth: 340mm, height 180mm (without hood)Housing:The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.absorber plate:Specially designed absorber plate. The absorption of low frequencies and material vibrations takes place on two levels.Level 1: On the top of the base there is integrated vibration absorption using 5 felt absorbers. An absorber is centered under the base plate and eliminates the negative vibrations of the often criticized sheet metal tray. Another 4 absorbers are located under the feet of the record player.Level 2: 4 height-adjustable spikes made of chrome-plated stainless steel on the underside of the absorber plate.This double absorption results in a significantly improved sound.Ortofon Vinyl Master Alpha pickup:Very good beginner. Full-fledged pickup that harmonizes with many tonearms. Impresses with temperament and a neutral basic character.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and overheating no longer occur.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:Original Thorens turntable, painted matt blackSpikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Hood including hinges: 190Device feet made of stainless steel 43mm x 17mm (Image 2 and 3): 90 Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT-OC9XEB (elliptical): 279Audio-technica AT-OC9XEN (elliptical, naked): 369Audio-technica AT33EV(elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Ortofon Quintet Red (elliptical): 330 Ortofon Quintet Blue (elliptical, naked): 470 Ortofon Quintet Bronze (Fineline): 660 Ortofon Quinted Black (Shibata): 940The housing was coated with wenge veneer. The veneer was cut into different veneer parts and put together to form a uniform veneer image (mirrored). This technique is very complex and impresses with its unique appearance. The surface has several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the p Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Modell TD 320 MKII