Thorens TD 160S MK IV defekt an Bastler oder Ersatzteilverwerter. Gebrauchter Zustand, reparaturbedürftig.Gerät geht nicht an (lediglich spannungspassendes Netzteil verfügbar/18V IBM wird mitgeliefert), Sicherung des Armes ist abgebrochen. Deckel ist dabei, jedoch ohne Scharniere und ein Seitenteil ist locker. Leichte Gebrauchspuren vorhanden. Bilder sind Bestandteil der Beschreibung Warenzeichen/Markennamen sind Eigentum des Jeweiligen Herstellers und dienen hier nur zur eindeutigen Beschreibung des Artikels Versand- und Verpackungskosten sind hinterlegt Als defekt deklarierte Artikel sind von der Rücknahme ausgeschlossen Aufgrund des Kleinunternehmerstatus wird gemäß § 19 UStG die MwSt. in der Rechnung nicht ausgewiesen. Bitte die AGBs beachtenInformationspflicht gemäß § 18 Batteriegesetz (BattG)Bitte geben Sie Ihre alten Akkus und Batterien an einer kommunalen Sammelstelle oder im Handel vor Ort (kostenlos) ab. Die Entsorgung über den Hausmüll ist verboten und verstößt gegen das Batteriegesetz. Sie können die bei uns erworbenen Batterien und Akkus nach dem Gebrauch an uns unentgeltlich zurückgeben. Bitte beachten Sie, dass die Rücknahmen nur für Akkus und Batterien gilt.Rücksendungen sind (ausreichend frankiert) zu richten an:Arne LabuhnLeanderweg 221614 BuxtehudeBatterien und Akkus, die Schadstoffe enthalten, sind mit dem Symbol einer durchkreutzen Mülltonne deutlich erkennbar gekennzeichnet. Des Weiteren befindet sich unter dem Symbol der durchkreuzten Mülltonne, die chemische Kennzeichnung der entsprechenden Schadstoffe. Beispiele hierfür sind: (PB) Blei, (CD) Cadmium, (HG) Quecksilber

Ich verkaufe einige Thorens Ersatzteile: I only ship within the EU. Not to USA UK Australia Russia India Asia... Platine Steuerung THORENS TD 160 IV 146 V gebraucht Wie auf den Bildern zu sehen, ist die Platine gut erhalten und voll funktionfähig. ANFRAGEN NACH ANDEREN ERSATZTEILEN ODER PREISANGEBOTE BITT PER MAIL oder telefonisch ab 20:00 Uhr Gewerbliches Angebot. Lieferung erfolgt gem. Fernabsatzgesetz. Siehe Widerrufsbelehrung. Normal 0 21 false false false DE X-NONE X-NONE

Ich biete einen Thorens TD 160 MKII Belt Drive Plattenspieler aus den späten 70er Jahren an, welcher technisch und optisch keine Mängel hat bis auf geringste Gebrauchsspuren am Deckel, welche für das Alter aber normal sind. Der Dreher kommt mit einem ELAC STS-255 MM-Tonabnehmer mit D355 Nadel und gutem Riemen. International bidders are welcome, please askfor the exact shipping cost before bidding. Technische Daten (Quelle: https://www.hifi-wiki.de/index.php/Thorens_TD_160_MK_II) AllgemeinHersteller: ThorensModell: TD 160 Mk IIBaujahre: 1976 - 1984Hergestellt in: SchweizFarbe: schwarz, silberLeistungsaufnahme:Abmessungen: 430 x 360 x 150 mm (BxHxT)Gewicht: ca. 8,5 kg AnschlüsseAusgänge: 1, ab Werk Kabel mit Cinch-Steckern. Technische DatenAntrieb: RiemenMotor: 16-poliger Synchronmotor (AC)Drehzahl: 33, 45 U/minGleichlaufschwankungen: 0,04 %Rumpelgeräuschabstand: 70 dBdoppelt gelagertes SubchassisPlattenteller: Zinkspritzguss, 300 mm, 3,2 kgBetriebsart: manuell (mechanische Endabschaltung Zubehör)Pitch: neinTonarm: TP 16 MK II Besondere AusstattungenMotor benötigt kein Netzteil. Regelung der Geschwindigkeit über die Netzfrequenz Der Verkauf erfolgt von privat unter Ausschluß jeglicher Gewährleistung bzw. Garantie. Bitte bedenken Sie, daß es sich um ein 30 bis 40 Jahre altes Gerät handelt, welches nicht die dauerhafte Funktionsgarantie eines Neugeräts aufweist. Das Angebot ist daher an Personen gerichtet, die wissen, was Sie hier kaufen. Es besteht kein Rückgaberecht. Mit Abgabe ihres Gebotes erklären sie sich mit diesen Bedingungen ausdrücklich einverstanden. Bieten sie nicht, wenn sie nicht einverstanden sind! The sale is made privately to the exclusion of any warranty or guarantee. There is no right of return. Please keep in mind that the device is 30 to 40 years old and does not have the long-term functional guarantee of a new device. The offer is therefore aimed at people who know what you are buying here. By submitting their bid, they expressly agree to these terms. Do notbid if you disagree!

Ich biete einen Thorens TD 160 MK I Belt Drive Plattenspieler aus den 1970er Jahren an, welcher technisch und optisch eigentlich keine Mängel hat bis auf geringe Gebrauchsspuren an der Zarge und dem Deckel, welche für das Alter aber normal sind. Der Dreher kommt mit einem neuen Riemen. Für 65,-€ Aufpreis gibt es das Ortofon VMS20 MKII dazu, ansonst wird der Plattenspieler mit Headshell ohne Tonabnehmer geliefert. International bidders are welcome, please askfor the exact shipping cost before bidding. Technische Daten (Quelle: https://www.hifi-wiki.de/index.php/Thorens_TD_160) AllgemeinHersteller: ThorensModell: TD 160Typ: PlattenspielerBaujahre: 1972 - 1976Hergestellt in: Deutschland bei EMT in LahrFarbe: schwarz, Holzfurnier; auch andere HolzartenLeistungsaufnahme:Abmessungen: 442 x 358 x 150 mm (BxHxT)Gewicht: ca. 8,5 kgNeupreis ca.: 490 DM AnschlüsseAusgänge: 1 Technische DatenAntrieb: RiemenMotor: 16-poliger Synchronmotor (AC)Drehzahl: 33, 45 U/minGleichlaufschwankungen:Rumpelgeräuschabstand: 50 dBPlattenteller: Zinkspritzguss, 300 mm, 3,2 kgBetriebsart: manuellPitch: neinTonarm: TP 16 Besondere AusstattungenMotor benötigt kein Netzteil. Regelung der Geschwindigkeit über die Netzfrequenz. Der Verkauf erfolgt von privat unter Ausschluß jeglicher Gewährleistung bzw. Garantie. Bitte bedenken Sie, daß es sich um ein 30 bis 40 Jahre altes Gerät handelt, welches nicht die dauerhafte Funktionsgarantie eines Neugeräts aufweist. Das Angebot ist daher an Personen gerichtet, die wissen, was Sie hier kaufen. Es besteht kein Rückgaberecht. Mit Abgabe ihres Gebotes erklären sie sich mit diesen Bedingungen ausdrücklich einverstanden. Bieten sie nicht, wenn sie nicht einverstanden sind! The sale is made privately to the exclusion of any warranty or guarantee. There is no right of return. Please keep in mind that the device is 30 to 40 years old and does not have the long-term functional guarantee of a new device. The offer is therefore aimed at people who know what you are buying here. By submitting their bid, they expressly agree to these terms. Do notbid if you disagree!

Ich biete einen Thorens TD 160B MK II Belt Drive Plattenspielerlaufwerk zur eigenen Auswahl eines Tonarms, welcher technisch und optisch keine Mängel hat bis auf normale Gebrauchsspuren an der Zarge, welche für das Alter aber normal sind. Der Plattenspieler wurde mit einem 10mm Tellerlager ausgestattet und hat einen Metallsubteller.Der Dreher kommt neuem Riemen und ohne Deckel. International bidders are welcome, please askfor the exact shipping cost before bidding. Technische Daten (Quelle: https://www.hifi-wiki.de/index.php/Thorens_TD_160_MK_II) AllgemeinHersteller: ThorensModell: TD 160B Mk IIBaujahre: 1976 - 1984Hergestellt in: SchweizFarbe: schwarz, silberLeistungsaufnahme:Abmessungen: 430 x 360 x 150 mm (BxHxT)Gewicht: ca. 7,9 kg Anschlüssekeine Technische DatenAntrieb: RiemenMotor: 16-poliger Synchronmotor (AC)Drehzahl: 33, 45 U/minGleichlaufschwankungen: 0,04 %Rumpelgeräuschabstand: 70 dBdoppelt gelagertes SubchassisPlattenteller: Zinkspritzguss, 300 mm, 3,2 kgBetriebsart: manuell (mechanische Endabschaltung Zubehör)Pitch: neinTonarm: TP 16 MK II, TP 16 Mk III, TP 21 Besondere AusstattungenMotor benötigt kein Netzteil. Regelung der Geschwindigkeit über die Netzfrequenz Der Verkauf erfolgt von privat unter Ausschluß jeglicher Gewährleistung bzw. Garantie. Bitte bedenken Sie, daß es sich um ein 30 bis 40 Jahre altes Gerät handelt, welches nicht die dauerhafte Funktionsgarantie eines Neugeräts aufweist. Das Angebot ist daher an Personen gerichtet, die wissen, was Sie hier kaufen. Es besteht kein Rückgaberecht. Mit Abgabe ihres Gebotes erklären sie sich mit diesen Bedingungen ausdrücklich einverstanden. Bieten sie nicht, wenn sie nicht einverstanden sind! The sale is made privately to the exclusion of any warranty or guarantee. There is no right of return. Please keep in mind that the device is 30 to 40 years old and does not have the long-term functional guarantee of a new device. The offer is therefore aimed at people who know what you are buying here. By submitting their bid, they expressly agree to these terms. Do notbid if you disagree!

Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay!Danger! Wood is a natural product and each frame is unique. The product photos are example photos. If you are interested in this record player, we will show you different walnut cabinets you can choose from.Attention! Wood is a natural product and each frame is unique. The product photos are sample photos. If you are interested in this record player, we will show you various walnut wood cases from which you can choose.. This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored THORENS TD160 MKII in a solid walnut frameOr optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique. The housings are newly manufactured using skilled craftsmanship. Electronic components are checked and replaced if necessary. BMoving parts are oiled and wearing parts are replaced. A final endurance test completes the complex work.Item descriptionLimit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cm Housing:The housing consists of 25mm thick side panels made of solid walnut wood (oiled) and a 16mm thick MDF base. On the back there is the connection panel for all required cable connections.Cover plate:Aluminum, matt black anodized with white letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Spikes made of chrome-plated stainless steel:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood large (to be placed on the substructure): 190 Device feet made of stainless steel (height adjustable, 43 x 15mm): 120 The following pickup systems are recommended for this tonearm.Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899Audio-Technica VM95ML (microlinear): 179Audio-Technica VM95SH (Shibata): 219Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT33EV (elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Audio-technica OC9ML (microlinear): 599Audio-technica OC9SH (Shibata): 699Audio-technica OC9XSL (Special Line Contact): 799SME tonearms (including Ortofon Vinylmaster Alpha pickup, please inquire about other pickups):SME 3009 improved (fixed headshell): 690 SME 3009 S2 improved (replaceable headshell): 690 SME Series III (replaceable tonearm tube): 690 Attention! Wood is a natural product and each frame is unique. The product photos are sample photos. If you are interested in this record player, we will show you various walnut wood cases from which you can choose.. Our record players are lovingly assembled and handcrafted. Each of them is unique. The housings are newly manufactured using skilled craftsmanship. Electronic components are checked and replaced if necessary. BMoving parts are oiled and wearing parts are replaced. A final endurance test completes the complex work. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion pro

Individual production! Please note the processing time stated on eBay! Individual production! Please note the processing time specified on Ebay!Danger! Wood is a natural product and each frame is unique. The product photos are example photos. If you are interested in this record player, we will show you different walnut cabinets you can choose from.Attention! Wood is a natural product and each frame is unique. The product photos are sample photos. If you are interested in this record player, we will show you various walnut wood cases from which you can choose.. This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored THORENS TD160 MKII in a solid walnut frameOr optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique. The housings are newly manufactured using skilled craftsmanship. Electronic components are checked and replaced if necessary. BMoving parts are oiled and wearing parts are replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx.18cm Housing:The housing consists of 25mm thick side panels made of solid walnut wood (oiled) and a 16mm thick MDF base. On the back there is the connection panel for all required cable connections.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Spikes made of chrome-plated stainless steel:To decouple the record player from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood large (to be placed on the substructure): 190 Device feet made of stainless steel (height adjustable, 43 x 15mm): 120 The following pickup systems are recommended for this tonearm.Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron stylus): 899Audio-Technica VM95ML (microlinear): 179Audio-Technica VM95SH (Shibata): 219Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation:Audio-technica AT33EV (elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Audio-technica OC9ML (microlinear): 599Audio-technica OC9SH (Shibata): 699Audio-technica OC9XSL (Special Line Contact): 799SME tonearms (including Ortofon Vinylmaster Alpha pickup, please inquire about other pickups):SME 3009 improved (fixed headshell): 690 SME 3009 S2 improved (replaceable headshell): 690 SME Series III (replaceable tonearm tube): 690 Attention! Wood is a natural product and each frame is unique. The product photos are sample photos. If you are interested in this record player, we will show you various walnut wood cases from which you can choose.. Our record players are lovingly assembled and handcrafted. Each of them is unique. The housings are newly manufactured using skilled craftsmanship. Electronic components are checked and replaced if necessary. BMoving parts are oiled and wearing parts are replaced. A final endurance test completes the complex work. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion pro

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminum, black anodized Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. with transparent turntable mat and single puck. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood WhiteThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminium, glossy white painted Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look. With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Nussbaumholz BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid walnut frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid walnut wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:Aluminum, matt black anodized with white letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tonearm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Nussbaumholz Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid walnut frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid walnut wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tonearm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) You can find even more interesting offers from us. Take a look at... Art-and-Sound Germany Bei Selbstabholung 70,00 € Rabatt! RESTAURIERT von ART-AND-SOUND Restaurierter THORENS TD160 MKII in massiver NussbaumholzzargeOder wahlweise Thorens TD146 mit Endabschaltung Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt und montiert. Jeder von ihnen ist ein Unikat. Die Gehäuse werden in qualifizierter Handwerksarbeit neu angefertigt. Elektronische Bauteile werden überpüft und gegebenenfalls ersetzt. Beweglichen Teile geölt und Verschleißteile ausgetauscht. Ein abschließender Dauertest runden die aufwendigen Arbeiten ab. Artikelbeschreibung: Endabschaltung: Nein Innenteller: MetallLagerdorn: 7 mm Grundmaße: Breite: 45cm, Tiefe: 36cm, Höhe ca.18cm Gehäuse: Das Gehäuse besteht aus 25mm starken Seitenteilen aus massivem Nussbaumholz (geölt) und einem 16 mm starken Boden aus MDF. Rückseitig befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen. Deckplatte: Edelstahl gebürstet mit schwarzer BeschriftungNeuer Tonabnehmer Ortofon OM5E:Das Ortofon OM5E ist ein vollwertiger Tonabnehmer. Es überzeugt durch Temperament und einen neutralen Grundcharakter. Das OM5E verfügt über einen elliptischen Stift, der eine ausgewogene und verzerrungsfreie Wiedergabe ermöglicht.Audiokabel:Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit.Plattenteller: Eine matt schwarze Lackierung des Plattentellers, verleiht Ihrem Plattenspieler eine dauerhafte und dezent wirkende Eleganz.Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Der Antriebsriemen:Der Antriebsriemen ist neu. Er wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. FolgendeTeile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube klein (zum Aufsetzen auf die Zarge): 160 Haube groß (zum Aufsetzen auf den Unterbau): 180 Thefollowing parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 Für diesen Tonarm werden folgende Tonabnehmersysteme empfohlen.The following pickup systems are recommended for this tonearm.Cartridge MM System including installation: Ortofon 2M Red (elliptisch): 99 Ortofon 2M Blue (elliptisch, nackt): 190 Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 599 AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (spezieller Line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799SME Tonarme (mit verschiedenen Tonabnehmern zur Auswahl): SME 3009 Improved (festes Headshell): 690SME 3009 S2 Improved (wechselbares Headshell): 690SME Series III (wechselbares Tonarmrohr): 690

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood WhiteThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminium, glossy white painted Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look. With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminum, black anodized Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. with transparent turntable mat and single puck. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood WhiteThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminium, glossy white painted Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look. With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminium, glossy white painted Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:In five complex and time-consuming steps, the turntable is polished to a high gloss.The high gloss polish gives your record player a unique look. With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in solid pear wood frameor optionally Thorens TD146 with limit switchOur record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.You can choose between TD160 MKII or TD146TD160 MKIIOriginal tonearm:    TP 16 MKII, with exchangeable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable 230V / 120V Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmTD146 Original tonearm:    TP 11 MKII, with exchangeable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply 16V / 500mA Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The case consists of 25 mm thick side panels made of solid pear wood (oiled) and a 16 mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate: Cover plate made of 1mm aluminum, black anodized Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and subtle elegance. with transparent turntable mat and single puck. Device feet: To decouple the record player from low-frequency vibrations, the chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):         90ORTOFON 2M Blue (elliptical, naked):        190ORTOFON 2M Bronze (Fineline): 390 ORTOFON 2M Black (Shibata):     590 ORTOFON 2M Black LVB 250 (Shibata with boron stylus):    899 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799Our record players are lovingly assembled and handcrafted. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Cherrywood Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII or optionally TD146 with limit switchRecord player in solid cherry wood frame(Image 2 shows the installed church wood frame. The other pictures serve to illustrate the record player)Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid cherry wood (oiled) and a 16mm thick MDF base. The connection panel for all required cable connections is located on the back.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tone arm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plat Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid pear wood frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid pear wood (oiled) and a 16mm thick MDF base. The connection panel for all required cable connections is located on the back.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tone arm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plat Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Nussbaumholz Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid walnut frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid walnut wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tonearm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Nussbaumholz BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid walnut frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid walnut wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:Aluminum, matt black anodized with white letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tonearm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Hallo,verkaufe Thorens TD 160 Mk II 2 Vintage Plattenspieler.Funktionsfähig,ein Scharnier gebrochen,Zustand s.Bilder.Privatverkauf,keine Garantie und Rückgaberecht.Schauen Sie meine andere Auktionen.

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid pear wood frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid pear wood (oiled) and a 16mm thick MDF base. The connection panel for all required cable connections is located on the back.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tone arm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plat Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restaurierter Thorens Td 160 Mkii Turntable Massive Pear Wood Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND Restored THORENS TD160 MKII in a solid pear wood frameOr alternatively Thorens TD146 with limit switchOur record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm thick side panels made of solid pear wood (oiled) and a 16mm thick MDF base. The connection panel for all required cable connections is located on the back.Cover plate:Brushed stainless steel with black letteringNew Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure): 180 The following parts are available as accessories and not included in this auction: Hood small (to put on the housing): 160 Hood large (to put on the base): 180 The following pickup systems are recommended for this tonearm.The following pickup systems are recommended for this tone arm.Cartridge MM system including installation: Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plat Antriebstyp Riemenantrieb Marke Restaurierter Thorens EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland