Thorens Tonearm TP28 For TD 280 Up To Mk. III And TD 166 MkV Headshell And Lift The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5geff. Length 232mmOverhang 16.4mmOffset 23°Headshell TP 68Condition: used, very good conditionThe installed system (cartridge) is defective and is not part of this auction  Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5g eff. Length 232mm Overhang 16.4mm Offset 23° Headshell TP 68 Condition: used, very good condition The installed system (cartridge) is defective and is not part of this auction   Herstellernummer nicht zutreffend Marke Thorens Produktart Tonarm Markenkompatibilität Für Thorens EAN Nicht zutreffend

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Neuteile: Riemen und Netzteil Ausgeführte Arbeiten: 1) Motor geölt 2) Tellerlageröl erneuert 3) Komplettreinigung, auch Antriebspulley und Außenrand des Innentellers entfettet 4) Tellermatte ist ohne nennenswerte Schattierungen oder gar Risse und wurde nach dem Waschen mit ArmorAll-glänzend behandelt 5) Dezente Schmierung der Mimik im Inneren 6) Haube 1x auspoliert mit Spezialpaste 7) Runde Plastikfüße mit Chromimitat-Beschichtung, siehe letzte Bilder Die Haube ist jetzt wieder m. E. wohnzimmertauglich und gut bis sehr gut erhalten. Ein Vorbesitzer hat einen leichten Bruch an der Rückseite Scharnier links verursacht. Es knackt oder knirscht aber nichts. Ich lege eine Tube mit klassischen Sekundenkleber bei. Da gehe ich nicht ran. Es ist die dickere Zarge von einem TD160 S mit den Metallscharnieren. Beim Reinigen löste sich teilweise das Kantenfurnierband an der Oberseite ab. Ein ausreichend langes Furnierband zum Aufbügeln oder -kleben lege ich bei. Es wird so lang sein, daß ggfs. auch die Stirnseiten einer dickeren Bodenplatte beschichtet werden könnten. Gott schütze imaginären Feintuning ;-) Beim Spieler muß die Anschlußbuchse von Netzstecker getauscht werden. Ein gebrauchtes Ersatzteil liegt bei. Es sind KEINE Lötkenntnisse erforderlich. Der Stecker hält auch so und rastet ein. Der Tonarm TP50 führte zwei Tonabnehmer ohne Probleme. Diese sachgerechte Verpackung ist kostspieliger wegen des Aufwandes ( Monsterkarton ) Kein Versand an Shops oder Packstation. Nach Zahlungseingang auf mein Konto wird der Artikel umgehend verschickt werden. Das Versandrisiko liegt dennoch beim Käufer, siehe AGB des Transportunternehmens. Bei Abholung wird das Gerät nicht vorgeführt. Es ist versand- bzw. transportfähig verpackt. Auspacktipps gibt es kostenlos bei Abholung. Keine Garantie, Gewährleistung, Rücknahme, Nachverhandlungen.

Thorens Tonearm TP28 For TD 280 Up To Mk. III And TD 166 MkV Headshell And Lift The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5geff. Length 232mmOverhang 16.4mmOffset 23°Headshell TP 68Condition: used, very good conditionThe installed system (cartridge) is defective and is not part of this auction  Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5g eff. Length 232mm Overhang 16.4mm Offset 23° Headshell TP 68 Condition: used, very good condition The installed system (cartridge) is defective and is not part of this auction   Herstellernummer nicht zutreffend Marke Thorens Produktart Tonarm Markenkompatibilität Für Thorens EAN Nicht zutreffend

Bras de lecture Thorens TP 28, installé par ex. B. sur les modèles TD 280 (jusquà Mk. III) et TD 166 Mk. v. avec porte-cellule et élévateur (tout comme indiqué) Eff. Masse 12,5geff. Longueur 232mmSurplomb 16,4 mmDécalage 23°Coquille TP 68Etat : occasion, très bon étatLe système installé (cartouche) est défectueux et ne fait pas partie de cette enchère  Bras de lecture Thorens TP 28, installé par ex. B. sur les modèles TD 280 (jusquà Mk. III) et TD 166 Mk. v. avec porte-cellule et élévateur (tout comme indiqué) Eff. Masse 12,5g eff. Longueur 232mm Surplomb 16,4 mm Décalage 23° Coquille TP 68 Etat : occasion, très bon état Le système installé (cartouche) est défectueux et ne fait pas partie de cette enchère  

Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5geff. Length 232mmOverhang 16.4mmOffset 23°Headshell TP 68Condition: used, very good conditionThe installed system (cartridge) is defective and is not part of this auction  Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5g eff. Length 232mm Overhang 16.4mm Offset 23° Headshell TP 68 Condition: used, very good condition The installed system (cartridge) is defective and is not part of this auction  

High-End THORENS TD-166 MK5 MKV Turntable Original tonearm w/ Ortofon Cartridge. Unit is in Excellent condition and perfectly working. THAT IS A FINE EXAMPLE. The cover show scratches and scuffs but still in nice shape. Tonearm is perfect. Ortofon cartridge have a brand new stylus.... Units work and sound fabulous. Ready for tons of hours of nice music. Units will be packed with extreme care. I will pack this for war, I know how to make it smooth and secure. This unit will be professionally packaged secure travel, I know how to pack them, no worry.LOOK AND SUPERSIZE EACH PICTURES TO SEE THE CONDITION !!!Winner pay actual shipping cost plus packing fees, About 75$ for USA, 40$ for QC & ON, around 225$ WORLDWIDE via EMS AIRMAIL.PICKUP IS ALLOWED BUT I SHIP ANYWHERE, WORLDWIDE... Please ask for rates. ITEM WILL BE PROFESSIONALY PACKED TO SURVIVE ON ANY TRIP!!! I charge real price paid, Im not in the business of making on money on shipping... I DO AWESOME BLASTPROOF PACKAGING... CHECK MY FEEDBACKS...

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Neuteile: Riemen und Netzteil Ausgeführte Arbeiten: 1) Motor geölt 2) Tellerlageröl erneuert 3) Komplettreinigung, auch Antriebspulley und Außenrand des Innentellers entfettet 4) Tellermatte ist ohne nennenswerte Schattierungen oder gar Risse und wurde nach dem Waschen mit ArmorAll-glänzend behandelt 5) Dezente Schmierung der Mimik im Inneren 6) Haube 1x auspoliert mit Spezialpaste 7) Runde Plastikfüße mit Chromimitat-Beschichtung, siehe letzte Bilder Die Haube ist jetzt wieder m. E. wohnzimmertauglich und gut bis sehr gut erhalten. Ein Vorbesitzer hat einen leichten Bruch an der Rückseite Scharnier links verursacht. Es knackt oder knirscht aber nichts. Ich lege eine Tube mit klassischen Sekundenkleber bei. Da gehe ich nicht ran. Es ist die dickere Zarge von einem TD160 S mit den Metallscharnieren. Beim Reinigen löste sich teilweise das Kantenfurnierband an der Oberseite ab. Ein ausreichend langes Furnierband zum Aufbügeln oder -kleben lege ich bei. Es wird so lang sein, daß ggfs. auch die Stirnseiten einer dickeren Bodenplatte beschichtet werden könnten. Gott schütze imaginären Feintuning ;-) Beim Spieler muß die Anschlußbuchse von Netzstecker getauscht werden. Ein gebrauchtes Ersatzteil liegt bei. Es sind KEINE Lötkenntnisse erforderlich. Der Stecker hält auch so und rastet ein. Der Tonarm TP50 führte zwei Tonabnehmer ohne Probleme. Beigelegt wird ein gebrauchtes Ortofon OM soundso. Nur kurz getestet. Diese sachgerechte Verpackung ist kostspieliger wegen des Aufwandes ( Monsterkarton ) Kein Versand an Shops oder Packstation. Nach Zahlungseingang auf mein Konto wird der Artikel umgehend verschickt werden. Das Versandrisiko liegt dennoch beim Käufer, siehe AGB des Transportunternehmens. Bei Abholung wird das Gerät nicht vorgeführt. Es ist versand- bzw. transportfähig verpackt. Auspacktipps gibt es kostenlos bei Abholung. Keine Garantie, Gewährleistung, Rücknahme, Nachverhandlungen.

Thorens Tonearm TP28 For TD 280 Up To Mk. III And TD 166 MkV Headshell And Lift The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5geff. Length 232mmOverhang 16.4mmOffset 23°Headshell TP 68Condition: used, very good conditionThe installed system (cartridge) is defective and is not part of this auction  Thorens tonearm TP 28, installed e.g. B. on the TD 280 models (up to Mk. III) and TD 166 Mk. v. with headshell and lift (everything as shown) Eff. Mass 12.5g eff. Length 232mm Overhang 16.4mm Offset 23° Headshell TP 68 Condition: used, very good condition The installed system (cartridge) is defective and is not part of this auction   Herstellernummer nicht zutreffend Marke Thorens Produktart Tonarm Markenkompatibilität Für Thorens EAN Nicht zutreffend

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Neuteile: Riemen und Netzteil Ausgeführte Arbeiten: 1) Motor geölt 2) Tellerlageröl erneuert 3) Komplettreinigung, auch Antriebspulley und Außenrand des Innentellers entfettet 4) Tellermatte ist ohne nennenswerte Schattierungen oder gar Risse und wurde nach dem Waschen mit ArmorAll-glänzend behandelt 5) Dezente Schmierung der Mimik im Inneren mit PTFE-Spray 6) Haube 1x auspoliert mit Spezialpaste und feinen Baumwolltüchern 7) Gummifüße weg, dafür runde Plastikfüße mit Chromimitat-Beschichtung, siehe letzte Bilder Die Haube ist jetzt wieder m. E. Aber-Hallo-wohnzimmertauglich und gut bis sehr gut erhalten. Ein Vorbesitzer hat einen leichten Bruch an der Rückseite Scharnier links verursacht. Es knackt oder knirscht aber nichts. Ich lege eine Tube mit klassischen Sekundenkleber bei. Da gehe ich nicht ran. Es ist die dickere Zarge von einem TD160 S mit den Metallscharnieren. Beim Reinigen löste sich teilweise das Kantenfurnierband an der Oberseite ab. Evtl. finde ich noch einen Rest Furnierband in schwarz zum Selbst-Aufbügeln. Ein Vorbesitzer hatte mal die Zarge getauscht. Beim Spieler muß die Anschlußbuchse von Netzstecker getauscht werden. Ersatzteil liegt bei. Der Stecker hält auch so und rastet ein. Der Tonarm TP50 führte zwei Tonabnehmer ohne Probleme. Beigelegt wird ein gebrauchtes Ortofon OM5E oder so. Nur kurz getestet. Diese sachgerechte Verpackung ist kostspieliger wegen des Aufwandes. Kein Versand an Shops oder Packstation. Nach Zahlungseingang auf mein Konto wird der Artikel umgehend verschickt werden. Das Versandrisiko liegt dennoch beim Käufer, siehe AGB des Transportunternehmens. Bei Abholung wird das Gerät nicht vorgeführt. Keine Garantie, Gewährleistung, Rücknahme, Nachverhandlungen.

Neuteile: Riemen und Netzteil Ausgeführte Arbeiten: 1) Motor etwas geölt 2) Tellerlageröl erneuert 3) Komplettreinigung, auch Antriebspulley und Außenrand des Innentellers entfettet 4) Tellermatte ist ohne nennenswerte Schattierungen oder gar Risse und wurde nach dem Waschen mit ArmorAll-glänzend behandelt 5) Dezente Schmierung der Mimik im Inneren mit PTFE-Spray 6) Haube 1x auspoliert mit Spezialpaste und feinen Baumwolltüchern 7) Gummifüße weg, dafür runde Plastikfüße mit Chromimitat-Beschichtung, siehe letzte Bilder Die Haube ist jetzt wieder m. E. Aber-Hallo-wohnzimmertauglich und gut bis sehr gut erhalten. Ein Vorbesitzer hat einen leichten Bruch an der Rückseite Scharnier links verursacht. Es knackt oder knirscht aber nichts. Ich lege eine Tube mit klassischen Sekundenkleber bei. Da gehe ich nicht ran. Es ist die dickere Zarge von einem TD160 S mit den Metallscharnieren. Beim Reinigen löste sich teilweise das Kantenfurnierband an der Oberseite ab. Evtl. finde ich noch einen Rest Furnierband in schwarz zum Selbst-Aufbügeln. Ein Vorbesitzer hatte mal die Zarge getauscht. Beim Spieler muß die Anschlußbuchse von Netzstecker getauscht werden. Ersatzteil liegt bei. Der Stecker hält auch so und rastet ein. Der Tonarm TP50 führte zwei Tonabnehmer ohne Probleme. Beigelegt wird ein gebrauchtes Ortofon OM5E oder so. Nur kurz getestet. Diese sachgerechte Verpackung ist kostspieliger wegen des Aufwandes. Kein Versand an Shops oder Packstation. Nach Zahlungseingang auf mein Konto wird der Artikel umgehend verschickt werden. Das Versandrisiko liegt dennoch beim Käufer, siehe AGB des Transportunternehmens. Bei Abholung wird das Gerät nicht vorgeführt. Keine Garantie, Gewährleistung, Rücknahme, Nachverhandlungen.

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Der Thorens muß optisch weiter aufgearbeitet oder modifiziert werden. Neuteile: Riemen und Netzteil Ausgeführte Arbeiten: 1) Motor etwas geölt 2) Tellerlageröl erneuert 3) Komplettreinigung, auch Antriebspulley und Außenrand des Innentellers entfettet 4) Tellermatte ist ohne Schattierungen oder Risse und wurde nach dem Waschen mit ArmorAll-glänzend (mit Polymeranteile) behandelt 5) Dezente Schmierung der Mimik im Inneren 6) Haube 1x auspoliert mit Spezialpaste und feinen Baumwolltüchern 7) Gummifüße weg, dafür runde Plastikfüße mit Chromimitat-Beschichtung ( nicht die abgebildeten ) Die Haube ist jetzt wieder m. E. Aber-Hallo-wohnzimmertauglich und gut bis sehr gut erhalten. Ein Vorbesitzer hat einen leichten Bruch an der Rückseite Scharnier links verursacht. Es knackt oder knirscht aber nichts. Ich lege eine Tube mit klassischen Sekundenkleber bei. Da gehe ich nicht ran. Es ist die dickere Zarge von einem TD160 S mit den Metallscharnieren. Beim Reinigen löste sich teilweise das Kantenfurnierband an der Oberseite ab. Evtl. finde ich noch einen Rest Furnierband in schwarz zum Selbst-Aufbügeln. Ein Vorbesitzer hatte mal die Zarge getauscht. Ich filosofiere nie über Resonanzen. Beim Spieler muß die Anschlußbuchse von Netzstecker getauscht werden. Ersatzteil liegt bei. Der Stecker hält auch so und rastet ein. Der Tonarm TP50 führte zwei Tonabnehmer ohne Probleme. Es wird aber nichts vormontiert. Zur SACHGERECHTEN Verpackung mit geeignetem Transportschutz: Ich bin in der Lage, wie schon oft in der Vergangenheit, so ein Laufwerk sicher zu verpacken. Ein aktuelles Bild zeigt übrigens diesen Thorens in einem klassischen MONSTERkarton, der gerade einen Umzug ohne Probleme überlebt hatte. SO muß ein Spieler verpackt werden ! Diese sachgerechte Verpackung ist kostspieliger wegen des Aufwandes. Hier gibt es bitteschön keine Gegenvorschläge von Besserwissern. Kein Versand an Shops oder Packstation. Nach Zahlungseingang auf mein Konto wird der Artikel umgehend verschickt werden. Das Versandrisiko liegt dennoch beim Käufer, siehe AGB des Transportunternehmens. Bei Abholung wird das Gerät nicht vorgeführt. Bei Abholung durch einen Dritten wird der Karton zugeklebt und fotografiert. Keine Garantie, Gewährleistung, Rücknahme, Nachverhandlungen. Weitere Bilder folgen !

High-End THORENS TD-166 MK5 MKV Turntable Original tonearm w/ Ortofon Cartridge. Unit is in Excellent condition and perfectly working. THAT IS A FINE EXAMPLE. The cover show scratches and scuffs but still in nice shape. Tonearm is perfect. Ortofon cartridge have a brand new stylus.... Units work and sound fabulous. Ready for tons of hours of nice music. Units will be packed with extreme care. I will pack this for war, I know how to make it smooth and secure. This unit will be professionally packaged secure travel, I know how to pack them, no worry.LOOK AND SUPERSIZE EACH PICTURES TO SEE THE CONDITION !!!Winner pay actual shipping cost plus packing fees, About 75$ for USA, 40$ for QC & ON, around 225$ WORLDWIDE via EMS AIRMAIL.PICKUP IS ALLOWED BUT I SHIP ANYWHERE, WORLDWIDE... Please ask for rates. ITEM WILL BE PROFESSIONALY PACKED TO SURVIVE ON ANY TRIP!!! I charge real price paid, Im not in the business of making on money on shipping... I DO AWESOME BLASTPROOF PACKAGING... CHECK MY FEEDBACKS...

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany Restored 166 MKV with Ortofon OM5EThe gold ring AC 500 shown in the pictures is not part of this offerOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         7mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon OM5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): 160    Hood big (to be placed on the substructure): 180The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160  Hood large (to put on the base):  180 Cartridge MM systems including installation: Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fine line): 360 With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM5E is the entry into the series and is a great entry-level system for mid-range turntables. The OM series from Ortofon is compatible with each other. So you can start with an OM5E and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV Turntable With Ortofon VM AlphaThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Restored & Modified 166 MKV with new Ortofon Vinyl Master AlphaThe gold ring AC 500 shown in the pictures is not part of this offerWITH A FIGHTING WEIGHT OF OVER 9 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         8mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Cartridge MM systems including installation: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weigh Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV

Restored Thorens TD 166 MKV Turntable With Ortofon VM AlphaThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Restored & Modified 166 MKV with new Ortofon Vinyl Master AlphaThe gold ring AC 500 shown in the pictures is not part of this offerWITH A FIGHTING WEIGHT OF OVER 9 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:   NoInner plate:            plasticPlate spindle:         8mm Basic dimensions:          Width: 45cm, depth: 36cm, height 20cmNew housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.The bottom of the case is equipped with three openings for the orizontal alignment of the turntable.The Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. New audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. New spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes.Resonances and feedback are thus effectively prevented. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Large power supply:A new power supply unit is included in delivery. This power supply has twice the power of the original power supply. Performance bottlenecks and heating no longer occur.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood small (to be placed on the frame): eBay-item number 112401191474Hood big (for placing on the substructure):    eBay-item number 112411582098The following parts are available as accessories and not included in this auction:Hood small (to put on the housing):    German eBay-article number is 112401191474Hood large (to put on the base):            German eBay-article number is 112411582098Cartridge MM systems including installation: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weigh Herstellernummer nicht zutreffend Marke Thorens EAN Nicht zutreffend Antriebstyp Riemenantrieb Modell TD 166 MKV