Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting petrol metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD160 MKII Turntable Schwarz-Burgundy Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - burgundy metallic with SME Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting burgundy metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck.Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Td 160 Mkii Turntable & Sme Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND 160 MKII with SME Series III tonearmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD160 MKII

Restored Thorens TD 160 Turntable Sme 3009 Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUNDThorens TD160 with SME Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.Cover plate:New cover plate made of 1mm brushed stainless steelOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 160 MKII Turntable With Sme Series III oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The oak frame is a natural product and always differs in grain. Figures 2 to 5 show the possible casings from which you can choose your desired oak frame.The oak frame is a natural product and always differs in grain. Figures 2 to 5 show the possible casings from which you can choose your desired oak frame.RESTORED by ART-AND-SOUND 160 Great with SME Series III tonarm and 100-year-old oak woodOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back. Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Normal 0 21 false false false DE X-NONE X-NONE Ortofon VinylMaster Red (naked elliptical cut): 190Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 460 Ortofon 2MRed (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: AT-OC9XML (Microlinear): 599AT-OC9XSH (Shibata): 699AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160 MKII

Restored Thorens Turntable Either TD146 Ode 160 Mkii Turquoise Blue No SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.ATTENTION: This offer does not contain an SME tonearm but the original tonearms TP11 MKII or TP16 MKIIIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-turquoise blue metallic (Both variants are visually identical) WITH A FIGHTING WEIGHT OF OVER 11 KG!!! Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting turquoise blue metallic Ortofon Vinyl Master Alpha pickup: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable: Paint finish glossy black Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red Verso (elliptical):                 99ORTOFON 2M Blue Verso (elliptical, naked): 199ORTOFON 2M Bronze Verso (Fineline):           390 ORTOFON 2M Black Verso (Shibata): 590 AUDIO-TECHNICA VM 740ML (Microlinear):                339AUDIO-TECHNICA VM 750 SH (Shibata):          439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata):            799AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Mehrfarbig Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Black Burgundy Red Metallic & SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!RESTORED by ART-AND-SOUND Restored THORENS TD160 with SME 3009 black and burgundy red metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting burgundy red metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting petrol metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck. Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens TD160 MKII Turntable Schwarz-Burgundy Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in glossy black but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in shiny black but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound Germany REVISED by ART-AND-SOUND Restored 160 MK II in black - burgundy metallic with SME Series IIIOur record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting burgundy metallicOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance. with transparent turntable support and single puck.Height-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxyge Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland Herstellergarantie 1 Jahr

Restored Thorens Td 160 Mkii Turntable & Sme Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND 160 MKII with SME Series III tonearmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD160 MKII

Restored Thorens TD 160 Turntable Sme 3009 Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUNDThorens TD160 with SME Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.Cover plate:New cover plate made of 1mm brushed stainless steelOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160

Restored Thorens TD160 B Mkii Sme 3009 Turntable Dark Ocean Blue MetThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRevised by ART-AND-SOUND Restored 160 B MKII with SME 3009 II in dark ocean blue metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting dark ocean blue metallicThe Ortofon VinylMaster Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens Turntable Either TD146 Ode 160 Mkii Turquoise Blue No SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.ATTENTION: This offer does not contain an SME tonearm but the original tonearms TP11 MKII or TP16 MKIIIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) REVISED by ART-AND-SOUND Restored THORENS either TD146 or TD160 MKII in black-turquoise blue metallic (Both variants are visually identical) WITH A FIGHTING WEIGHT OF OVER 11 KG!!! Our record players are lovingly put together and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. You can choose between TD146 or TD160 MKIITD146 Original tonearm:    TP 11 MKII, with replaceable tonearm tube Limit switch:         YES Inner plate:                  plastic Bearing mandrel: 7mm Power supply:       with plug-in power supply Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cm TD160 MKIIOriginal tonearm:    TP 16 MKII, with replaceable tonearm tube Limit switch:         No Inner plate:                  metal Bearing mandrel:                  7mm Power supply:       with power cable Basic dimensions:                Width: 45cm, depth: 36cm, height approx. 20cmAlso possible with SME tonearm! Housing: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Cover plate: Cover plate made of 1mm aluminum with surface painting turquoise blue metallic Ortofon Vinyl Master Alpha pickup: With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Audio cable: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable: Paint finish glossy black Height-adjustable device feet: Stainless steel. The contact surface with the base is reduced to a minimum by 3 rubber buffers. Resonances and feedback are thus effectively prevented. The drive belt: The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. -------- The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Normal 0 21 false false false DE X-NONE X-NONE Cartridge MM system including installation: ORTOFON 2M Red Verso (elliptical):                 99ORTOFON 2M Blue Verso (elliptical, naked): 199ORTOFON 2M Bronze Verso (Fineline):           390 ORTOFON 2M Black Verso (Shibata): 590 AUDIO-TECHNICA VM 740ML (Microlinear):                339AUDIO-TECHNICA VM 750 SH (Shibata):          439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata):            799AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Mehrfarbig Modell wahlweise TD146 oder TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Turquoise Blue With Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND 160 MKII black - turquoise blue with SME Series III tonarmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with turquoise blue surface paintOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:High-gloss black finishDevice feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):      220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 470 Ortofon 2MRed (elliptical):                99Ortofon 2M Blue (elliptical, naked):  190Ortofon 2M Bronze (Fineline):         390 Ortofon 2M Black (Shibata):            590 Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weigh Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160B Mkii Turntable IN Yellow Curry & Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! RESTORED by ART-AND-SOUND Restored 160B MKII in curry yellowwith SME 3009WITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:original, mint conditionThe Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).. --------The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM including installation:Ortofon Vinyl Master Silver (Fritz Gyger): €490The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact secur Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160B MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Black Burgundy Red Metallic & SmeThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!RESTORED by ART-AND-SOUND Restored THORENS TD160 with SME 3009 black and burgundy red metallicOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting burgundy red metallicOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:A matt black finish on the turntable gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 MKII Turntable Black White Cream Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The right switch is not available in this version; the lift is operated manually directly on the tonearm.The right switch is not available in this variant, the lift is operated manually directly on the tonearm.RESTORED by ART-AND-SOUND 160 MKII black - white cream with SME Series III tonarmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting white creamThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2220g, diameter 54mm, height 34mm. Cartridge MM system including installation:   Cartridge MC System including installation: The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD160 Turntable Electric Orange Ice Blue With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Reconditioned THORENS TD160 orange-ice blue metallic with SME 3009 tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm Housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Cover plate:Cover plate made of 1mm aluminum with surface painting ice blue metallicOrtofon Vinyl Master Alpha pickup:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical, naked): 199Ortofon VinylMaster Silver (Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 160 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland