Ich verkaufe einige Thorens Ersatzteile: I only ship within the EU. Not to USA UK Australia Russia India Asia... 16 V Netzteil für die meisten THORENS Plattenspieler THORENS TD 146 166 II 147 320 .... 220 V in, 16V AC out, 1100 mA - extrem leistungfähig Bitte sehen Sie nach, an Ihrem Plattenspieler auf dem Typenschild steht: Umin 16 V~. Das Netzteil ist gebraucht und funktioniert. Die Teile sind so, wie auf dem Bild zu sehen und beschrieben. ANFRAGEN NACH ANDEREN ERSATZTEILEN ODER PREISANGEBOTE BITT PER MAIL oder telefonisch ab 20:00 Uhr Gewerbliches Angebot. Lieferung erfolgt gem. Fernabsatzgesetz. Siehe Widerrufsbelehrung. Normal 0 21 false false false DE X-NONE X-NONE

Restored Thorens TD166 Turntable 100 Jähriges oak Wood Ice BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 166 in solid oak frame and ice blue finish(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     NoInner plate: plasticBearing mandrel:              10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:Aluminum, surface ice blue metallic paintTurntable support:Plastic, surface ice blue metallic paintOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following parts are available as upgrades and are not part of this auction:Small hood (to be placed on the housing): 160Large hood (to be placed on the base): 180Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 ORTOFON Quintet Red (elliptical): 330ORTOFON Quintet Blue (elliptical, naked): 470ORTOFON Quintet Bronze (Fineline): 660ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell 166 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD146 Turntable From 100 Jährigem oak Wood Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 146 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: plasticBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm demagnetized stainless steel and labelingThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked):      470 ORTOFON Quintet Bronze (Fineline):               660 ORTOFON Quinted Black (Shibata):   940 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 146 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD147 Turntable Black And 100 Jähriges oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220/230V/50Hz or 110/120V/50/60Hz (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!RESTORED by ART-AND-SOUND Restored 147 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our record players are lovingly put together and assembled by hand. Each of them is unique. The housings are newly manufactured using qualified craftsmanship. Electronic components are checked and replaced if necessary. bAll moving parts are oiled and wearing parts are replaced. A final endurance test rounds off the complex work.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmSpecial feature:          Subchassis with vibration-absorbing mat Housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:original cover plate, black with letteringOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Power adapter:The scope of delivery includes a new power supply with double power and overheating protection.Turntable: The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Spikes made of chrome-plated stainless steel: So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a very good entry-level system for turntables in this price range. The VM series from Ortofon is compatible with each other. You can start with a VM Alpha and later improve the sound quality with the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you incr Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 147 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Thorens REFERENCE Plattenspieler MK1 Nr. 33 (hergestellt: 1979-1981) inkl. SME Tonarm 3012, gold inkl. 1 Stck. Moving Coil Pickup, STANTON inkl. 1 Stck. EMT-Kopf mit Magnet Pickup inkl. 3 Stck. Tonarm Plattformen in verschiedenen Größen Technische Daten zum Plattenspieler · THORENS Riemenantrieb · Drehstrommotor mit Kupplungsscheibe · Elektronische Motorregelung · Drei Geschwindigkeiten: 33 -1/3, 45 und 78 U/min · Pitch-Kontrolle ± 6% · beleuchtetes Stroboskop am äußeren Plattentellerrand · Schweres Grundchassis und schweres schwimmendes Chassis, beides Aluminiumgussteile. Die speziell berechneten Kammern im schwimmenden Fahrgestell sind gefüllt mit Gemasertes Eisen für optimale Dämpfung · Vibrations- und stoßfeste 4-Punkt-Aufhängung mit vergoldeten Gehäusen. Jeder Aufhängepunkt ist individuell einstellbar · Wasserwaage · die Resonanz des schwimmenden Chassis kann exakt eingestellt werden (1-5 Hz) passend zur Tonarm- und Tonabnehmerkombination · speziell gedämpfte Drehtellerplatte mit 6,6 kg Gewicht und 30,3 cm Durchmesser · Neue und teure Hauptlagerkonstruktion für das beste Rumpeln der Welt Abbildung. Die hochpräzise geschliffene Stahlwelle dreht sich in ölgebadetem Hart Materiallager · Schallplattenstabilisator, vergoldet · 3-Tonarm-Plattformen in verschiedenen Größen · 2 Elektromotor-Hebebühnen (optional) · vergoldete Steuerplatinen, montiert auf dem Hauptchassis · große Staubschutzhaube · Wow und Flattern nach DIN 45507: < 0,02% Rumpeln ungewichtet, gemessen mit Rumpelmesskoppler* nach DIN A, besser als 82 dB · Gewicht: ca. 90 kg · Abmessungen: 620x360x510 mm Jeder REFERENCE Plattenspieler wurde individuell von Hand gefertigt. Dadurch konnten Kundenwünsche bezüglich Farbe, Tonarmen und Motorliften erfüllt werden. Offiziell wurden nur 100 Einheiten gebaut und verkauft.PAYPAL Zahlung möglich. VERSAND NACH RÜCKSPRACHE WELTWEIT MÖGLICH.Kein Versand nach Russland, Ukraine, Syrien. Thorens REFERENCE turntable MK1 No. 33 (manufactured: 1979-1981) Incl. SME tonearm 3012, goldincl. 1 pc. Moving coil pickup, STANTONincl. 1 pc. EMT head with magnet pickupincl. 3 pcs. Tonearm platforms in different sizes Turntable specificationsTHORENS belt drive· Three-phase motor with clutch disc· Electronic engine control· Three speeds: 33 -1/3, 45 and 78 rpmpitch control ± 6%· Illuminated strobe on the outer edge of the turntable· Heavy base chassis and heavy floating chassis, both aluminum castings. The specially calculated chambers in the floating chassis are filled with grained iron for optimal cushioning· Vibration and shock resistant 4-point suspension with gold-plated housings. Each suspension point is individually adjustable· Bubble level· the resonance of the floating chassis can be precisely adjusted (1-5 Hz) to match the tonearm and pickup combination· Specially cushioned turntable plate with a weight of 6.6 kg and a diameter of 30.3 cm· New and expensive main bearing design for the worlds best rumble mapping. The high-precision ground steel shaft rotates in oil-bathed Hart material bearings· Record stabilizer, gold plated· 3 tonearm platforms in different sizes2 electric motor lifts (optional)· Gold-plated control boards mounted on the main chassis· Large dust cover· Wow and flutter according to DIN 45507: < 0.02% rumble unweighted, measured with rumble measuring coupler* according to DIN A, better than 82 dB· Weight: approx. 90 kgDimensions: 620x360x510mmEach REFERENCE turntable is individually handcrafted. This allowed customer requests regarding color, tonearms and motor lifts to be met.Officially only 100 units were built and sold.Payment via PAYPAL accepted.SHIPPING WORLDWIDE IS POSSIBLE AFTER CONSULTATION: No shipping to Russia, Ukraine, Syria.

Thorens REFERENCE Plattenspieler MK1 Nr. 33 (hergestellt: 1979-1981) inkl. SME Tonarm 3012, gold inkl. 1 Stck. Moving Coil Pickup, STANTON inkl. 1 Stck. EMT-Kopf mit Magnet Pickup inkl. 3 Stck. Tonarm Plattformen in verschiedenen Größen Technische Daten zum Plattenspieler · THORENS Riemenantrieb · Drehstrommotor mit Kupplungsscheibe · Elektronische Motorregelung · Drei Geschwindigkeiten: 33 -1/3, 45 und 78 U/min · Pitch-Kontrolle ± 6% · beleuchtetes Stroboskop am äußeren Plattentellerrand · Schweres Grundchassis und schweres schwimmendes Chassis, beides Aluminiumgussteile. Die speziell berechneten Kammern im schwimmenden Fahrgestell sind gefüllt mit Gemasertes Eisen für optimale Dämpfung · Vibrations- und stoßfeste 4-Punkt-Aufhängung mit vergoldeten Gehäusen. Jeder Aufhängepunkt ist individuell einstellbar · Wasserwaage · die Resonanz des schwimmenden Chassis kann exakt eingestellt werden (1-5 Hz) passend zur Tonarm- und Tonabnehmerkombination · speziell gedämpfte Drehtellerplatte mit 6,6 kg Gewicht und 30,3 cm Durchmesser · Neue und teure Hauptlagerkonstruktion für das beste Rumpeln der Welt Abbildung. Die hochpräzise geschliffene Stahlwelle dreht sich in ölgebadetem Hart Materiallager · Schallplattenstabilisator, vergoldet · 3-Tonarm-Plattformen in verschiedenen Größen · 2 Elektromotor-Hebebühnen (optional) · vergoldete Steuerplatinen, montiert auf dem Hauptchassis · große Staubschutzhaube · Wow und Flattern nach DIN 45507: < 0,02% Rumpeln ungewichtet, gemessen mit Rumpelmesskoppler* nach DIN A, besser als 82 dB · Gewicht: ca. 90 kg · Abmessungen: 620x360x510 mm Jeder REFERENCE Plattenspieler wurde individuell von Hand gefertigt. Dadurch konnten Kundenwünsche bezüglich Farbe, Tonarmen und Motorliften erfüllt werden. Offiziell wurden nur 100 Einheiten gebaut und verkauft.PAYPAL Zahlung möglich. VERSAND NACH RÜCKSPRACHE WELTWEIT MÖGLICH.Kein Versand nach Russland, Ukraine, Syrien. Thorens REFERENCE turntable MK1 No. 33 (manufactured: 1979-1981) Incl. SME tonearm 3012, goldincl. 1 pc. Moving coil pickup, STANTONincl. 1 pc. EMT head with magnet pickupincl. 3 pcs. Tonearm platforms in different sizes Turntable specificationsTHORENS belt drive· Three-phase motor with clutch disc· Electronic engine control· Three speeds: 33 -1/3, 45 and 78 rpmpitch control ± 6%· Illuminated strobe on the outer edge of the turntable· Heavy base chassis and heavy floating chassis, both aluminum castings. The specially calculated chambers in the floating chassis are filled with grained iron for optimal cushioning· Vibration and shock resistant 4-point suspension with gold-plated housings. Each suspension point is individually adjustable· Bubble level· the resonance of the floating chassis can be precisely adjusted (1-5 Hz) to match the tonearm and pickup combination· Specially cushioned turntable plate with a weight of 6.6 kg and a diameter of 30.3 cm· New and expensive main bearing design for the worlds best rumble mapping. The high-precision ground steel shaft rotates in oil-bathed Hart material bearings· Record stabilizer, gold plated· 3 tonearm platforms in different sizes2 electric motor lifts (optional)· Gold-plated control boards mounted on the main chassis· Large dust cover· Wow and flutter according to DIN 45507: < 0.02% rumble unweighted, measured with rumble measuring coupler* according to DIN A, better than 82 dB· Weight: approx. 90 kgDimensions: 620x360x510mmEach REFERENCE turntable is individually handcrafted. This allowed customer requests regarding color, tonearms and motor lifts to be met.Officially only 100 units were built and sold.Payment via PAYPAL accepted.SHIPPING WORLDWIDE IS POSSIBLE AFTER CONSULTATION: No shipping to Russia, Ukraine, Syria.

Thorens REFERENCE Plattenspieler MK1 Nr. 33 (hergestellt: 1979-1981) inkl. SME Tonarm 3012, gold inkl. 1 Stck. Moving Coil Pickup, STANTON inkl. 1 Stck. EMT-Kopf mit Magnet Pickup inkl. 3 Stck. Tonarm Plattformen in verschiedenen Größen Technische Daten zum Plattenspieler · THORENS Riemenantrieb · Drehstrommotor mit Kupplungsscheibe · Elektronische Motorregelung · Drei Geschwindigkeiten: 33 -1/3, 45 und 78 U/min · Pitch-Kontrolle ± 6% · beleuchtetes Stroboskop am äußeren Plattentellerrand · Schweres Grundchassis und schweres schwimmendes Chassis, beides Aluminiumgussteile. Die speziell berechneten Kammern im schwimmenden Fahrgestell sind gefüllt mit Gemasertes Eisen für optimale Dämpfung · Vibrations- und stoßfeste 4-Punkt-Aufhängung mit vergoldeten Gehäusen. Jeder Aufhängepunkt ist individuell einstellbar · Wasserwaage · die Resonanz des schwimmenden Chassis kann exakt eingestellt werden (1-5 Hz) passend zur Tonarm- und Tonabnehmerkombination · speziell gedämpfte Drehtellerplatte mit 6,6 kg Gewicht und 30,3 cm Durchmesser · Neue und teure Hauptlagerkonstruktion für das beste Rumpeln der Welt Abbildung. Die hochpräzise geschliffene Stahlwelle dreht sich in ölgebadetem Hart Materiallager · Schallplattenstabilisator, vergoldet · 3-Tonarm-Plattformen in verschiedenen Größen · 2 Elektromotor-Hebebühnen (optional) · vergoldete Steuerplatinen, montiert auf dem Hauptchassis · große Staubschutzhaube · Wow und Flattern nach DIN 45507: < 0,02% Rumpeln ungewichtet, gemessen mit Rumpelmesskoppler* nach DIN A, besser als 82 dB · Gewicht: ca. 90 kg · Abmessungen: 620x360x510 mm Jeder REFERENCE Plattenspieler wurde individuell von Hand gefertigt. Dadurch konnten Kundenwünsche bezüglich Farbe, Tonarmen und Motorliften erfüllt werden. Offiziell wurden nur 100 Einheiten gebaut und verkauft.PAYPAL Zahlung möglich. VERSAND NACH RÜCKSPRACHE WELTWEIT MÖGLICH.Kein Versand nach Russland, Ukraine, Syrien. Thorens REFERENCE turntable MK1 No. 33 (manufactured: 1979-1981) Incl. SME tonearm 3012, goldincl. 1 pc. Moving coil pickup, STANTONincl. 1 pc. EMT head with magnet pickupincl. 3 pcs. Tonearm platforms in different sizes Turntable specificationsTHORENS belt drive· Three-phase motor with clutch disc· Electronic engine control· Three speeds: 33 -1/3, 45 and 78 rpmpitch control ± 6%· Illuminated strobe on the outer edge of the turntable· Heavy base chassis and heavy floating chassis, both aluminum castings. The specially calculated chambers in the floating chassis are filled with grained iron for optimal cushioning· Vibration and shock resistant 4-point suspension with gold-plated housings. Each suspension point is individually adjustable· Bubble level· the resonance of the floating chassis can be precisely adjusted (1-5 Hz) to match the tonearm and pickup combination· Specially cushioned turntable plate with a weight of 6.6 kg and a diameter of 30.3 cm· New and expensive main bearing design for the worlds best rumble mapping. The high-precision ground steel shaft rotates in oil-bathed Hart material bearings· Record stabilizer, gold plated· 3 tonearm platforms in different sizes2 electric motor lifts (optional)· Gold-plated control boards mounted on the main chassis· Large dust cover· Wow and flutter according to DIN 45507: < 0.02% rumble unweighted, measured with rumble measuring coupler* according to DIN A, better than 82 dB· Weight: approx. 90 kgDimensions: 620x360x510mmEach REFERENCE turntable is individually handcrafted. This allowed customer requests regarding color, tonearms and motor lifts to be met.Officially only 100 units were built and sold.Payment via PAYPAL accepted.SHIPPING WORLDWIDE IS POSSIBLE AFTER CONSULTATION: No shipping to Russia, Ukraine, Syria.

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide) Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! Bei Selbstabholung 70,00 € Rabatt! RESTAURIERT von ART-AND-SOUND Restaurierter THORENS TD 146 in massiver Eichenholzzarge(die Holzmaserung fällt unterschiedlich aus) Holz ist ein Naturprodukt. Bitte beachten Sie, das die Maserung immer unterschiedlich ausfällt. Bild 6 bis 9 zeigt die möglichen Eichenholz Zargen aus denen Sie sich Ihre Zarge auswählen können. Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung.Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. Zarge aus 100-jährigem Eichenholz Holz mit Geschichte....Das Altholz aus Eiche ist vermutlich aus Rundholz, das in der Waldkircher Gemarkung geschlagen worden ist und im „Sailerlenzen“– Hof eingelagert wurde. Vermutlich wurde dieser Hof um 1780 – 1800 aufgebaut. Dieser Hof ist im Jahre 1902 abgebrannt und das Holz wurden damals vor den Flammen gerettet. Die „Blockbohlen“ waren in Ihrem ersten Leben Außenwände von alten Häusern, sie wurden größtenteils von Hand behauen und sind ca. 105-120 Jahre alt. Artikelbeschreibung: Endabschaltung: Ja Innenteller: KunststoffLagerdorn: 7mm Grundmaße: Breite: 45cm, Tiefe: 36cm, Höhe ca.18cm Das Gehäuse: Das Gehäuse besteht aus 25mm starken Seitenteilen aus massivem Eichenholz (geölt) und einem 16 mm starken Boden aus MDF. Rückseitig befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen. Faceplate:Deckplatte aus 1mm Aluminium schwarz eloxiert mit Beschriftung Tonabnehmer Ortofon OM5E:Das Ortofon OM5E ist ein vollwertiger Tonabnehmer. Es überzeugt durch Temperament und einen neutralen Grundcharakter. Das OM5E verfügt über einen elliptischen Stift, der eine ausgewogene und verzerrungsfreie Wiedergabe ermöglicht.Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller:In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen. Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz.Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Antriebsriemen:Der Antriebsriemen ist neu. Er wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. FolgendeTeile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube klein (zum Aufsetzen auf die Zarge): 160 Haube groß (zum Aufsetzen auf den Unterbau): 180 Cartridge MM System including installation: ORTOFON 2M Red (elliptisch): 129 ORTOFON 2M Blue (elliptisch, nackt): 249 ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata): 649 AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (spezieller Line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptisch): 279 AUDIO-TECHNICA AT-OC9XEN (elliptisch, nackt): 369 AUDIO-TECHNICA AT-33EV (elliptisch): 499 AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599 AUDIO-TECHNICA AT-33SA (Shibata): 799SME Tonarme (mit verschiedenen Tonabnehmern zur Auswahl): SME 3009 Improved (festes Headshell): 690SME 3009 S2 Improved (wechselbares Headshell): 690SME Series III (wechselbares Tonarmrohr): 690

Restored Thorens TD146 Turntable From 100 Jährigem oak Wood BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 146 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. Figures 6 to 9 show the possible oak frames from which you can choose your frame.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: plasticBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm black anodized aluminum with letteringOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 146 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Gegengewicht für TP 90 Tonarm 100g (exakt gemessen) gebraucht,in sehr gutem Zustand ! Privat Verkauf, keine Garantie oder Rücknahme

Restored Thorens TD146 Turntable From 100 Jährigem oak Wood BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 146 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. Figures 6 to 9 show the possible oak frames from which you can choose your frame.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: plasticBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm black anodized aluminum with letteringOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 146 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD166 Turntable 100 Jähriges oak Wood Ice BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 166 in solid oak frame and ice blue finish(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     NoInner plate: plasticBearing mandrel:              10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Cover plate:Aluminum, surface ice blue metallic paintTurntable support:Plastic, surface ice blue metallic paintOrtofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). The following parts are available as upgrades and are not part of this auction:Small hood (to be placed on the housing): 160Large hood (to be placed on the base): 180Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799 ORTOFON Quintet Red (elliptical): 330ORTOFON Quintet Blue (elliptical, naked): 470ORTOFON Quintet Bronze (Fineline): 660ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound perform Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell 166 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD146 Turntable From 100 Jährigem oak Wood Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 146 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. After purchasing, you will receive various housing variants from which you can choose your housing. It will always be made of hundred-year-old oak.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: plasticBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm demagnetized stainless steel and labelingThe Ortofon VinylMaster Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked):      470 ORTOFON Quintet Bronze (Fineline):               660 ORTOFON Quinted Black (Shibata):   940 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 146 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Sie bieten auf ein seltenes und gut erhaltenes Magazin LP Februar/März 2019 (2)

Sie bieten auf ein seltenes und gut erhaltenes Magazin LP Februar/März 2019 (2)

Restored Thorens TD146 Turntable From 100 Jährigem oak Wood BlackThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA and world wide)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!RESTORED by ART-AND-SOUND Restored 146 in a solid oak frame(the wood grain varies)Wood is a natural product. Please note that the grain is always different. Figures 6 to 9 show the possible oak frames from which you can choose your frame.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.frame made from 100-year-old oak wood Wood with history...The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old.Item description:Limit switch:     YesInner plate: plasticBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm black anodized aluminum with letteringOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and are not part of this auction: Hood small (to be placed on the frame): 160 Hood big (for placing on the substructure):    180 Cartridge MM system including installation: ORTOFON 2M Red (elliptical):      129ORTOFON 2M Blue (elliptical, naked):        249ORTOFON 2M Bronze (Fineline): 399 ORTOFON 2M Black (Shibata):     649 AUDIO-TECHNICA VM 740ML (Microlinear):           339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line):    699 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked):   369 AUDIO-TECHNICA AT-33EV (elliptical):                   499AUDIO-TECHNICA AT-33PTG/II (Microlinear):         599AUDIO-TECHNICA AT-33SA (Shibata):                      799SME tonearms (with different pickups to choose from):SME 3009 Improved (fixed headshell): 690SME 3009 S2 Improved (replaceable headshell): 690SME Series III (replaceable tonearm tube): 690The old oak wood is probably from round wood that was felled in the Waldkirch area and stored in the “Sailerlenzen” farm. This farm was probably built around 1780 - 1800. This farm burned down in 1902 and the wood was saved from the flames at that time. In their first life, the “logs” were the outside walls of old houses; they were mostly hewn by hand and are approx. 105-120 years old. The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 146 Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland