Technics SL-1800MK2 Tonearm Base/ Used Turntable Parts. Has some wear in one area where it meets the plinth, not noticeable when installed. In overall excellent condition.

Technics SL-1800MK2 On/Off Switch Assembly/ Used Turntable Parts. When switch is off it measured open line, when closed it measured .4 ohms. Functional, will probably fit the 1900mk2.

Technics SL-1800MK2 Control Accent Panel/ Used Turntable Parts SFUM172-03 2. There are some fine scratches but overall in good condition.

Technics SL-1800MK2 Direct Drive Motor w/ PC Board, Spindle, Used Turntable Part. Removed from a functional turntable. Spindle was removed, cleaned, re-oiled.

Trchnics SL-1800MK2 Rear Foot Mount/ Used Turntable Parts. In excellent used condition, includes 2 mounting screws.

Trchnics SL-1800MK2 Plinth/ Used Turntable Parts. There is some kind of mark or abrasion on every side, not warped, overall in good condition.

For sale is a used OEM dust cover for the Technics MK2 SL-1600, SL-1700, and SL-1800 direct drive turntables. This dust cover was pulled from an SL-1600 MK2. Its hard to make out in the photos, but there are light, cloudy scratches, scuffs, and some smaller gouges all over the top, sides and inside of the dust cover. It will need a good sand/polish, but there arent any cracks. Since this is a vintage item, it is sold as is with no returns accepted.

For sale is an OEM dust cover for the Technics MK2 SL-1600, SL-1700, and SL-1800 direct drive turntables. This dust cover was pulled from an SL-1600 MK2. Its hard to make out in the photos, but there are light, cloudy scratches all over the top and sides of the dust cover and some more pronounced scuffs on the inside. It will need a good sand/polish, but there arent any cracks. Since this is a vintage item, it is sold as is with no returns accepted.

Original Dust Cover for a Technics SL-1600Mk2, SL-1700Mk2, or SL-1800Mk2 Turntable. Dust cover does have scratches, and brush marks but nothing serious like cracks or chips. Cover is totally transparent. Hinges are not included. Please view the auction photos.

For sale is a set of OEM dust cover hinges and mounting brackets for Technics MK2 SL-1600, SL-1700, and SL-1800 direct drive turntables. These hinges and brackets were pulled from an SL-1600 MK2 that needed a new dust cover. There is a small amount of visible corrosion on them, but they work as intended and dont squeak when moved. The plastic brackets are in good shape, but the screws are not included. Since this is a vintage item, it is sold as is with no returns accepted.

Original Dust Cover for a Technics SL-1600Mk2, SL-1700Mk2, or SL-1800Mk2 Turntable. Dust cover has some scratches, and brush marks but No cracks or chips. Cover is totally transparent. Hinges are not included. Please view the auction photos. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.) PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery. We will only ship to the address listed on Ebay. All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items. We include insurance free of charge on all of the items that we sell. We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.) Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped. Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there! All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean. Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller. We are no longer accepting bids from 0 FeedBack members or bidders. By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Pair of Technics dust cover hinges that will fit turntables: SL-1600Mk2, SL-1700Mk2, and SL-1800Mk2. Hinges are complete(both sides and hardware.) They are strong and will hold your dust cover up. Removed from a working turntable. Please view auction photos. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.) PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery. We will only ship to the address listed on Ebay. All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items. We include insurance free of charge on all of the items that we sell. We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.) Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped. Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there! All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean. Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller. We are no longer accepting bids from 0 FeedBack members or bidders. By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Pair of Technics dust cover hinges that will fit turntables: SL-1600Mk2, SL-1700Mk2, and SL-1800Mk2. Hinges are complete(both sides and hardware.) They are strong and will hold your dust cover up. Removed from a working turntable. Please view auction photos. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.) PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery. We will only ship to the address listed on Ebay. All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items. We include insurance free of charge on all of the items that we sell. We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.) Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped. Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there! All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean. Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller. We are no longer accepting bids from 0 FeedBack members or bidders. By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Technics Tonearm which will fit turntable models: SL-1600Mk2, SL-1700Mk2, and SL-1800Mk2. The cuing lever is missing from the base. I dont know if it was removed or snapped off. The rest of the tone arm and other components are working(removed from a working turntable.) Please view the auction photos. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.) PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery. We will only ship to the address listed on Ebay. All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items. We include insurance free of charge on all of the items that we sell. We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.) Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped. Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there! All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean. Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller. We are no longer accepting bids from 0 FeedBack members or bidders. By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Original Dust Cover for a Technics SL-1600Mk2, SL-1700Mk2, or SL-1800Mk2 Turntable. Dust cover has some scratches, and brush marks but No cracks or chips. Cover is totally transparent. Hinges are not included. Please view the auction photos. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.) PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery. We will only ship to the address listed on Ebay. All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items. We include insurance free of charge on all of the items that we sell. We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.) Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped. Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there! All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean. Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller. We are no longer accepting bids from 0 FeedBack members or bidders. By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Original Technics SL-1800Mk2 Dealer Brochure as shown. This is not a reprint but does have a 3 Hole punch. In some cases, the (3) Hole punch area is ripped, please look at the photos to see if this is the case, I have all the Technics Brochures from the Late 1970s Early 1980s. Please look at the photos to fully grade cosmetics. Shipping will be prompt and professional.

VENDO GIRADISCHI DELLA TECHNICS QUARTZ DIREC DRIVE TURNTABLE SYSTEM MODELLO SL-1800MK2 - NON FUNZIONANTE SENZA SHELL E TESTINA DA UTILIZZARE PER PEZZI DI RICAMBIO (BRACCIO, CERNIERE, SCHEDE, ECC....)