Biete ein Plattenspieler non Technics SL-BD21 aus den 80er Jahre Made in Japan - Automatic Turntable System- 33/45 U/min- Tonabnehmer Technics P 24- 220V/50 Hz/2 Watt- Serien.No.MG5L03B125- Antriebsriemen (NEU)- Nadel (NEU)- Farbe: schwarz- Maße: Breite;43 cm Höhe;10 cm Tiefe; 37,5 cm- Gewicht: 3,6 Kg- Halbautomatik- Plattenteller: Aluminium-Spritzguss 312mm- Motor: Gleichstromservomotor- Antrieb: Riemenantrieb- Ausgänge: 1 X Cinch Stecker rot/weiß (RCA) - Die Haube(Deckel hat gebrauchsspuren(Kratzer,kleiner Riss)- Wurde auf Funktion erfolgreich überprüft- Wird jedoch als Ersatzteil/Bastelware angeboten Privatverkauf,keine Garantie,keine Rücknahme Bei noch offene Fragen stehe ich gern zu Verfügung

Technics SL-BD2, SL-BD20, SL-BD21, SL-BD22, SL-BD33 Haube DeckelDer schön erhaltene Haube ohne tiefe KratzerKann noch etwas aufpolliert werdenSie Kaufen die Haube NICHT den Plattenspieler

Technics SL-BD21 Plattenspieler Optischer Zustand: ( Fotos) Technischer Zustand: funktionsfähig, der Riemen ist gegen neue ersetzt Zubehör: Cinchkabel, SHED - THE KILLER Schallplatte, Stromkabel Sichere Verpackung

Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!   Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!  

Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!   Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!  

Technics Model SL-BD21 turntable. Semi automatic (you have to manually place the tonearm on the record but it raises and returns to rest and shuts off automatically after record play). Belt drive and belt is in good condition. Original Technics rubber mat on platter, original needle has light wear, original EPC-P153 cartridge on tonearm. The unit has been tested and works well for all functions. Original ground wire included. 45 adapter included. Casing on unit has some wear. The dust cover is included, but has lots of scratches and scuffs on it, and the rear plastic tabs to put in the hinges are broken off, so you have to manually remove it from the turntable. The underside rubber feet are on the unit and are in good condition. Turntable measures 17 X 15 X 4. Shipping is being calculated by the cheapest shipping method available. Payment is required within 3 days of end of auction. Happy bidding !! Check out the other stuff that I have for auction on eBay this week I ship within 3 business days of receipt of payment I combine shipping on multiple purchases The items that I sell on eBay were purchased at estate sales. I can not guarantee that they are from smoke free homes, or homes with pets. If you are sensitive to certain scents/smells, please consider this, when placing a bid.

Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!   Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!  

This dust cover lid is compatible with Technics SL-BD2, SL-BD20, SL- BD21, and SL-BD22 record players. It is designed to protect your turntable from dust and other harmful particles while allowing easy access to your records. The lid fits securely and is made from high-quality materials to ensure durability. Whether youre a professional audiophile or a casual music listener, this dust cover lid is a must-have accessory for your Technics record player. It is compatible with all the mentioned models and is part of the Technics SL-BD2, SL-BD20, SL- BD21, and SL-BD22 product line. Get yours today and enjoy the peace of mind that comes with knowing your records are safe and secure. Please note this is a used dust cover and does show signs from its previous life. See pictures for further details.

Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!   Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!  

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

technics mat, platter ,feet for bl-210.All are in good condition.

Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!   Service Manual for Technics SL-BD21 record player/turntable (schematics, settings... - what you need to repair a device) It is an ORIGINAL from Technics!!! Good condition!     Have fun and good luck with the repair!!!  

technics mat, platter ,feet for bl-210.All are in good condition.

Original Technics SL-BD22 Dust Cover Lid, Fits SL-BD2, SL-BD20, SL- BD21. Some scuffs and marks on the plastic. No cracks or breaks. Condition is average to good. *** Send us an offer, we respond to them very fast! *** All of our items have been tested (if applicable), and are in working condition unless stated otherwise. The main items on the pictures are the exact items you will be receiving. In the case of a listing with a stock quantity, they will be in very similar condition. We strive to fully satisfy all of our customers. If an item were to arrive Defective on Arrival (DOA), we will issue a full refund of the item unless the item was sold in As is condition. Once a purchase is completed, the item will be shipped within 2 business days. Customer service is our top priority: We work hard to ensure every buyer is satisfied with their purchase. Our reputation is the most valuable thing to us. Please do not leave negative feedback, contact us directly should you have any issues with your purchase and we will make it right! :) As it is against eBay policy to ship to a different address than the one associated to your eBay account, please ensure your shipping details are up to date before confirming a purchase. Thank you for choosing us, we are a small family-run online store and your business means the world to us :) Feel free to contact us if you have any questions about an item prior to purchase and we will get back to you within 1 or 2 waking hours.

Technics SL-BD21 - Plattenspieler Schöner vintage Plattenspieler aus den 1970/80er Jahren. Funktioniert tadellos. Halbautomat, Riemenantrieb. Originalsystem und Antriebsriemen einwandfrei.Auf der Oberseite der Haube einige Kratzer vorhanden, siehe zweites Foto.Ansonsten guter Zustand. Porto und Verpackung 12,- €Privatverkauf etc.

Technics SL-BD21 Plattenspieler Riemen Neu Endabschaltung ohne Funktion StopTaste ohne Funktion Plattenspieler mit schönem Klang. Optischer Zustand siehe Bilder, mit Gebrauchsspuren und 2 Flecken in der Haube Das Gerät ist geprüft funktioniert bis auf die 2 Funktionen Allgemein Hersteller: TechnicsModell: SL-BD 21Baujahre: ca. 1986Hergestellt in: JapanFarbe: schwarz und SilberAbmessungen: 43 x 9,3 x 37,5 cm (BxHxT)Maximale Höhe bei geöffnetem Oberteil (Abdeckhaube): 43 x 36 x 41 cm (BxHxT)Gewicht: 3,6 kg Anschlüsse Ausgänge: 1 x Cinch Stecker rot/weiß (RCA)Technische Daten Antrieb: RiemenantriebMotor: GleichstromservomotorDrehzahl: 33 1/3, 45 U/minGleichlaufschwankungen: 0,045% WRMS (JIS C5521), ±0,06% Mittelwert von Null bis Spitze (IEC 98A bewertet)Rumpelgeräuschabstand: -70 dB DIN-B (IEC 98A bewertet)Plattenteller: Aluminium-Spritzguss, 312 mmBetriebsart: vollautomatischTonarm statisch balancierter, gerader TonarmTonabnehmersystem: Einsteckbarer T4P-Tonabnehmereffektive Armlänge: 230 mmÜberhang: 15 mmSpurfehlwinkel:+ 2°32 bei der Einlaufrille einer 30cm Platte + 0°32 bei der Auslaufrille einer 30cm Platte Effektive Masse: 13,5 g (einschl. Tonabnehmersystem)Nadeldruck-Einstellbereich: 1,25 g (nicht Einstellbar)Zulässiges Tonabnehmergewicht: 6g

technics mat, platter ,feet for bl-210.All are in good condition.