eBay listing template by 3Dsellers.com - Try for Free!

  Service Manual guide for technicians in English(schematics, settings... - what you need to repair a device) It is an ORIGINAL !!! Good condition! By all means take me in yours favorites on! Have fun and good luck with the repair!!!   Service Manual guide for technicians  in English (schematics, settings... - what you need to repair a device) It is an ORIGINAL !!! Good condition! By all means take me in yours favorites on! Have fun and good luck with the repair!!!Service Manual guide for technicians  in English (schematics, settings... - what you need to repair a device) It is an ORIGINAL !!! Good condition! By all means take me in yours favorites on! Have fun and good luck with the repair!!!

Item Description Condition is good. Since it is a used item, it is in good condition overall, although there are some damages and stains. This is a fully functioning item that has been serviced. ?Appearance: There are footprints and scratches from devices that appear to have been placed on top of each other on the top plate.Other parts are in very clean and good condition with no scratches. ?The front surface is clean with no scratches, including the glass part.The glass is clear and has good transparency. ?The bottom surface is also in good condition, and the soles of all four legs are in their original condition with no peeling of the rubber sheets. ?The gold-plated output terminal on the back is shiny with no scratches.The speaker terminal is also clean and in good condition with no eccentricity or cracks. ?The meter lamp lights up normally.The original illuminance is maintained. ?Large analog power meter also works normally. ?All LED lighting parts will light up normally.The original illuminance is maintained. ?Each part operation button maintains normal operating feel. ?Rated output (20Hz to 20kHz) 95W+95W(4?, 0.02%) 80W+80W(6?, 0.015%) 70W+70W(8?, 0.01%)?Total harmonic distortion rate 0.01% (20Hz to 20kHz, 8?)?Load impedance 4~16??Input sensitivity 1V/33k??S/N ratio 98dB(EIAJ)?Power supply AC100V, 50Hz/60Hz?Power consumption 210W?External dimensions Width 430x Height 136x Depth 344mm?Weight 9.8kg Shipping Handling time: Approximately 5-10 business days. Shipping method: Expedited shipping (FedEx /DHL /EMS): It will arrive approximately 4 days after shipment (to US), depending on the location. You can know the delivery status in detail.The method available depends on the status of the airmail.Shipping is only available at addresses registered with eBay. Please note that addresses that are not registered with eBay cannot be shipped. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Technics Power Amplifier SE-A1000 MOS Class AA Amplifier From Japan Description Product Details?This is a fully working item that has been maintained at our audio workshop.A genuine power cable is included.This is a very good item for those who want something reliable.?It is originally a used item, but it looks strangely old and rough. The item is in good condition and does not seem to have been used, and has been maintained to make it comfortable to use.The interior is also clean with no dust or dirt.The cooling fins are also in good condition.The exterior is also clean. The overall condition is good, but there are some scratches and footprints from devices that appear to have been placed on top of each other on the top plate.Other parts are in very clean and good condition with no scratches etc. ?Front is in good condition with no scratches, including the glass part. The glass is clear and has good transparency. ? The bottom is also in good condition, and the soles of all four legs are in their original condition with no peeling of the rubber sheet. ? Gold-plated output on the back The terminals are shining with no scratches. The speaker terminals are also clean and in good condition with no eccentricity or cracks. ?The meter lamp lights up normally. The original illuminance is maintained. ?The large analog power meter also works normally. ?Each LED lighting section All lights up normally.The original illuminance is maintained.?Each operation button maintains its normal operating feel.?There are no cigarettes or strange smells.?It uses a MOS class AA amplifier, which combines a pure class A voltage control amplifier using MOS FETs with excellent frequency characteristics and linearity, and a current supply amplifier consisting of a bipolar transistor with driving power, into a class AA bridge. By combining them, we aim to improve the sound quality.?The smoothing electrolytic capacitor in the power supply circuit uses a separator made of bamboo fiber. Combined with carefully selected aluminum foil and improved electrolyte, pure driving power is achieved.?Uses a large analog power meter that can be directly read from a minute signal of 0.001W.?The front panel uses a high-density hybrid material that suppresses vibrations ?OCC wire is used for internal wiring ?Reference https://audio-heritage.jp/TECHNICS/amp/se-a1000.html ?Rated output (20Hz~ 20kHz) 95W+95W(4?, 0.02%) 80W+80W(6?, 0.015%) 70W+70W(8?, 0.01%)?Total harmonic distortion rate 0.01% (20Hz to 20kHz, 8?)?Load impedance 4~16??Input sensitivity 1V/33k??S/N ratio 98dB(EIAJ)?Power supply AC100V, 50Hz/60Hz?Power consumption 210W?External dimensions Width 430x Height 136x Depth 344mm?Weight 9.8kg ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Delivery from Japan takes time.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

TECHNICS SE-A1000MK2 Power Amplifier 2X 70 Watts RMS Vintage Working ConfirmedDescriptionPlease check the picture.Shipping Fedex or DHL.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.