This is the pinnacle works from Technics ,made in the golden age of vinyl. Production could not be surpassed, even in the 21. century. It is playing so smooth and with an huge audio landscapeMind the low output(its the spec), you need a Riaa amp with sufficient correction. The stylus guard is working fineThe description is accurate and there will be no returns accepted on this unitOfficial specification: Type: MM, One-point suspension Magnetic Circuit All HPF core, precision ground finish Cantilever: Pure boron tapered pipe Damper: TTDD (Technics Temperature Defence Damper) Magnet: Disc-shaped samarium-cobalt (BH) max.=30MG Oe Frequency response: 5-120,000 Hz Output voltage: 1.2 mv (1 kHz), 5cm/s. zero to peak, lateral velocity (3.4 mV 1 kHz, 10 cm/s. zero topeak, 45 degrees velocity, DIN 45 500) Channel seperation: More than 25 db (1 kHz), More than 20 db (10 kHz) Channel balance: Within 0.5 db (1 kHz) Compliance: 12x10-6cm/dyne (100Hz, dynamic) DC resistance: 30 Ohm (we measure about 37-40 ohms) Inductance: 33 mH Impedance: 210 Ohm (1 kHz) L Recommended load resistance: 10kOhm~1MOhm Recommended load capacitance: Less than 500 pF Stylus tip: Linear elliptical stylus Effective moving mass: 0.055 mg Stylus pressure range: 1.25 +-0.25 g

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

DescriptionOperation verified.Please check photos for condition. AC100VShipping Fedex,DHL,Japan Post *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.Read more... Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Description Its genuine. Payment Please make a payment within 3 days otherwise automatically unpaid case will be opened. Shipping Ships within 5-10 business days (Monday to Friday). It will be shipped from Japan by airmail including tracking number and insurance. It will take 1-3 weeks to deliver, depending on the country and location.International Buyers - Please Note import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

Technics EPA-100 EPA-100mk2 Sub Counterweight Gold Used Japan DescriptionUsedShippingFedEx or UPS or Japan PostInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

* DescriptionWorlds first Boron / Titanium universal tonearmUnique bulit-in variable dynamic damping deviceRuby ball bearings gimbal suspension system with less than 5mg frictionPrecise 12 spiral hellical height adjustment with 20mm rangeLow resistance & capacitance phono cableLight and rigid Aluminum composite headshell - This is a top-quality Technics EPA-100 MK2 tonearm designed specifically for use with Technics turntables. - It is compatible with Technics brand products and comes in a sleek black color that is sure to complement any setup. - Whether youre looking to upgrade your existing turntable or replace a worn-out tonearm, the EPA-100 MK2 is an excellent choice. - In addition to its brand compatibility, this tonearm is highly sought-after for its precision engineering and exceptional build quality. - It is perfect for audiophiles and music enthusiasts who demand the very best in sound quality and performance. * ShippingWe shipping items via EMS. (Express Mail Service)The package will arrive about 7-14 days after shipment.Import related duties, customs clearance and other charges are not included in the item price or shipping costs. * Original box not included.* If you have any questions, please contact seller. Thank you.

Technics SH-10E Turntable Power Supply For SP-10MKII SL-1000MKII [Needs Work] This Unit is Defective, it is not Power on. Selling as is for parts or repair (No returns) Pictures are an integral part of this description, please use them to make your own judgement before you commit to the purchase Item may show some cosmetic imperfections such as dings and dents, scratches, scarf marks, stains and or discoloration from previous use Please reach out in case of any questions about the Item before you commit to the purchase as well ***Unit does not come with any other accessories (No Hookup cables / Remote/ Soundbar) **Item ships same or Next business day. INTERNATIONAL CUSTOMERS Please provide a complete physical address in English, with a valid phone number, Email and valid Contact name for your Delivery. Shipping fees are charged during eBay Checkout. Duties and Taxes, if applicable, are charged by your local government, and will be collected by the shipper at the time of Delivery. Please expect a phone call or email from the shipper to arrange delivery and collection of Duties and VAT/sales tax.

Technics SH-10E Turntable Power Supply For SP-10MKII SL-1000MKII [AS IS] This unit has not been tested on a functioning Turntable, it could be working or only good for parts or repair. (No returns) Pictures are an integral part of this description, please use them to make your own judgement before you commit to the purchase Item may show some cosmetic imperfections such as dings and dents, scratches, scarf marks, stains and or discoloration from previous use Please reach out in case of any questions about the Item before you commit to the purchase as well **Item ships same or Next business day. INTERNATIONAL CUSTOMERS Please provide a complete physical address in English, with a valid phone number, Email and valid Contact name for your Delivery. Shipping fees are charged during eBay Checkout. Duties and Taxes, if applicable, are charged by your local government, and will be collected by the shipper at the time of Delivery. Please expect a phone call or email from the shipper to arrange delivery and collection of Duties and VAT/sales tax.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Descriptionrecord playerTechnics/technics tone armEPA-100EPA-100mk2EPA-100PNThis is a production sub weight 50g.*Images 2 and 5 are installation examples and are not included.Size See imageThe inner diameter matches the outer diameter of the main weight.MaterialSub weight: Brass (S3604)Stopper: Brass (S3604)*Brass screw with a flat tip that is gentle on the shaft Easy-to-use flathead screw If you have any question or concern, please do not hesitate to contact me : ) ShippingStandard Shipping (FedEx, Japan Post)We usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days after shipment.Pack carefully : ) International Buyers - Please Note?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

eBay listing template by 3Dsellers.com - Try for Free!

Repair your CD Player with this working Display Board! Listing Store Feedback About Follow Contact Better for The Planet Easy on The Wallet Great for Your Soul Because your CD Player is a terrible thing to waste. Source CD PlayerTECHNICS SL-PD845 STEREO CD PLAYERBoard InformationDisplay Main BoardPart NumberRJB1007AAPart NumberRJB1007ABPart NumberCMK-P3XCD Player CompatibilityMay Be Compatible With Some Other Models.May Be Compatible With Other Brands. Grid (if shown) in images is approx. one inch by one inch (1 x 1 square). My MissionI empower individuals and shops around the world to repair their broken electronics instead of replacing them by providing hard to find parts from surplus devices I tested and disassembled. Together we can help protect our environment from a waste of electronics. Simply by fixing what is broken. SATISFACTION GUARANTEED!Item arrives in 100% working order. Tested working in original CD Player before recovery. Double checked by our technician to be in proper order. Take A LookPictures are of actual Display BoardEXPRESS PROCESSINGFast Shipping with Tracking! Shipping InformationWe understand you need your Display Board right away and will ship it quickly once we have received your payment. Most orders ship out the same day! Delivery time provided is simply an estimate based on the location and the shipping service selected. Delivery times may vary, especially during peak periods. Absolutely everything that you will receive is pictured in the listing. You will not receive any additional items, components, or instructions with your package.Return InformationReturns Accepted If you decide item you received isnt suitable for your needs, we would be able to accept your item back through the eBay returns system. Please open a return / refund request, select the appropriate reason and we will handle promptly.Customer SupportOur goal at Tech Parts Mart is to help you bring your device back to life by providing quality replacement parts for self-repair. Our friendly staff are eager to assist you in any way we can! If you have any questions or concerns, please contact us via eBay messages. Please allow us to resolve any issues before opening disputes or leaving feedback. Compatibility of any product with your device or system and safety procedures exercised during installation are the buyers responsibility. Our sole and exclusive maximum liability arising from any product sold shall be the price of the product ordered. 1523998213@2598/R26B 302.302 0x4 #I:10076311Source CD Player TECHNICS SL-PD845 STEREO CD PLAYER - - Board Information Display Main Board - Part Number RJB1007AA - Part Number RJB1007AB - Part Number CMK-P3X - - CD Player Compatibility May Be Compatible With Some Other Models. - May Be Compatible With Other Brands. - -

Welcome to Audio/Video Archives, the largest home of audio literature available on eBay! This Advertisement is a reprint from 1978. It is on glossy photo paper and is in Excellent condition! The Picture is the picture of the actual item. It is a beautiful piece of Audio History. I have THOUSANDS more from every major brand of Audio from 1950 up to now. ---Satisfaction is GUARANTEED at AV Archives! Take a look at my feedback for satisfied customers! I have been open since 2007 and have sold THOUSANDS of Ads, Reviews, and Brochures to satisfied customers. ---I Ship Worldwide and combine shipping, each additional item is just $1 after the first is paid. ---Each Page is 8.5 by 11 unless otherwise noted in title. ---Single Page, Single Sided Ads, unless otherwise noted in the title. ---These Ads are perfect for framing and placed in your Audio Room. ---I have a HUGE Vinyl Record Store with Thousands of Collectable records, and MANY First Pressings/Audiophile LPs. Just click on my Vinyl Record Store link on the left under categories. Email me for any specific questions, You will hear back from me usually within 4 hours, THANK YOU! Greg Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.

Description Although it is a used item, it is in good condition with no noticeable damage. All accessories shown in the photo are included. ShippingDHL or FedEx or Japan Post. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Important Point If you refuse to pay customs duties, we cannot refund the product cost. If you would like to request a return due to damage, malfunction, loss, or any other reason, please contact the store before opening the case.

listing many other similar items! >>>Visit StoreDescription Condition: Used Brand: Technics EPA-100 EPA-100mk2 Sub Weight 50g Production item Thank you for viewing.record playerTechnics/technics tone armEPA-100EPA-100mk2EPA-100PNThis is a production sub weight 50g.*Images 1 and 5 are installation examples and are not included.?Size See imageThe inner diameter matches the outer diameter of the main weight. ?MaterialSub weight: Brass (S3604)Stopper: Brass (S3604)*Brass screw with a flat tip that is gentle on the shaft Easy-to-use flathead screw?Condition See imageThe brass color gives it a luxurious feel.*As this is a manufactured product, there may be lathe marks and chuck scratches. There are cases where this happens. note that?How to useCartridge + shell weight is heavy and zeroMain weight if you cant balancePlace it over the top and balance it.Please set the stylus pressure using a precision meter.*Expanding the choice of cartridges and shells It becomes an item*This does not necessarily guarantee zero balance. there is no ?AccessoriesSub weight, anti-rotation (M4 screw)With protective tapeIf you dont have a sub weightPlease try this opportunity. Please check the picture for the condition of the product. Please refrain from nervous people and those who seek perfection.I am waiting for a question by a message?There may be an error in the Item specifics. ?Please give priority to photos and descriptions. Please read the full item description and contact us with any questions you may have prior to purchasing.Please let me know if there are any other products you want. Even if the condition is Unused, it has been handed to someone once, so we list it as a used item. Please purchase only if you understand the second hand product. The items we are selling are used in Japan. You may need a transformer for use in your country.Payment Please pay within 5 days after auction is finished.Shipping We ship to world wide for free by SAL(With tracking number). All items will be carefully packed and shipped to you directly from Japan.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Provided by HARU

Technics SH-100 Headshell für EPA-100/EPA-100Mk2 Beschreibung Auftreten von Artikel: Ausgezeichneter Zustand. Bitte beachten Sie die Fotos. Gemessenes Gewicht mit Anschlusskabeln: 9,8 g Einschließlich: Technics (Panasonic) Überhangmessgerät.Versand Der Artikel wird per Express-, Standard- oder Economy-Versand mit Sendungsverfolgung versendet. (Je nach Land.)Bitte fragen Sie uns, wenn Ihr Land nicht auf der Liste ist.Internationale Käufer – Bitte beachten Sie:Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. Bitte erkundigen Sie sich vor dem Bieten oder Kaufen beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.