DescriptionUsed ConditionPlease check the status description. PolicyPaymentPlease pay within 5 days after auction is finished.About UsAll of our goods are genuine articles. Moreover, we sell honestly. Please contact me, if you have your question.International Buyers - Please Note:Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

This rarely found cartridge replacement seems to be original hollow boron. It is used but unknown running hours. Im not sure of status of damping but I have tried it and it will hold its recomended tracking force of 1.25 grams with no problem. Boron needle seem a little bit skewed(see pictures) It could be that suspension is repaired as unit is not collapsed. Hollow boron is visible with no sleeves so it should be the original . Take a look at the picuteres,this is what you get! As this unit is fragile and close to 50 years old there will be no returns on this.Please contact me for shipping!

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

This rarely found cartridge replacement seems to be original hollow boron. It is used but unknown running hours. Im not sure of status of damping but I have tried it and it will hold its recomended tracking force of 1.25 grams with no problem. Boron needle seem a little bit skewed(see pictures) It could be that suspension is repaired as unit is not collapsed. Hollow boron is visible with no sleeves so it should be the original . Take a look at the picuteres,this is what you get! As this unit is fragile and close to 50 years old there will be no returns on this.Please contact me for shipping!

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Item Description Technics Technics EPA-100MK2 tone arm original box instruction manual genuine phono cable Positioning gauge and other items are included. - Trace has no problems and sound comes out firmly from both CHs. ?Stylus pressure adjustment, anti-skating adjustment, and height adjustment are smooth. ?It is a beautiful item with few scratches. -The lifter is smooth but the speed is slow. The vertical width also seems smaller than the new one. ?There are repair marks on the armrest. Although the strength is maintained, it seems to be weaker than a new product. - Comes with phono cable, manual, original box, mounting plate, mounting screws, and positioning gauge. It is used, but it is a good item. As it is an old work, please understand the dirt of aging deterioration. Pack tightly to avoid breakage. Shipping We ship to Worldwide. I ship only to the address registered your PayPal account. Shipping method: DHL or Fedex or Japan Post You cannot choose the delivery company. Please understand in advance. Delivery date Example: US 5 days to 1 week (excluding weekends) Visa numbers are required in some countries. Please prepare in advance. Payment Payment within 24 hours after winning the bid Other term International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -?do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. I do not want to pay because taxes are expensive. It can not be returne for reasons such as. Please understand in advance.

This rarely found cartridge replacement seems to be original hollow boron. It is used but unknown running hours. Im not sure of status of damping but I have tried it and it will hold its recomended tracking force of 1.25 grams with no problem. Boron needle seem a little bit skewed(see pictures) It could be that suspension is repaired as unit is not collapsed. Hollow boron is visible with no sleeves so it should be the original . Take a look at the picuteres,this is what you get! As this unit is fragile and close to 50 years old there will be no returns on this

DescriptionCondition :UsedSee the pictures for more details.If you have any question , please contact us.Shipping Handling time: 2-10 business days after payment.Economy Shipping from outside US (11 to 23 business days) - Free shipping Due to Japanese Post Service/DHL/FedEX, will be shipped according to the situation., estimated arrival time can be delay. And it depends on custom in your country also. So if it is late please contact local post office (carrier)with tracking number . NOTE:When shipping small items, the tracking number of economy shipping may not be attached.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Description release date 1983. Stereo DC power amplifier. Output: 150W+150W8?. SN ratio: 123DB Output band: 5HZ-100KHZ. Frequency characteristics: DC~20KHZ +0 -0.1DB Distortion rate: 0.002%. Dimensions: Width 430X Height 178X Depth 416MM. Weight: 18.4KG. Maintenance completed on February 22, 2024. Please contact us whenever you have questions. customer feedback ?Ive started to order the items from Japan in other online shops a year ago and never had the problems with quality and delivery to Moscow by EMS from Japanese side, everything was perfect and fast. ?Carefully packaged! Great product in mint condition! A+ seller! ????????????? ?Ill buy from this seller again. Looking first in his shop. Great service. ?Wonderful! Item exactly as described!! Top-rate seller! ?Very happy with this seller, well packed, doll is lovely thanks very much.. About us A specialty shop offering a wide variety of carefully selected Japanese brand items. Unless marked used all of our inventory is brand new, so you can feel confident about your purchase. Even if you think to yourself, But the item I want is only available in Japan., make sure to consult with us before giving up hope. We will look for and suggest the best products on your behalf. Besides I also have a lot of works. Please inquire any time. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

technics SH-10EA untested unknown condition

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

This is a reprint of an Audio Advertisement from 1977! The picture is of the actual item, Mint Condition! Very rare and hard to find! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.

This is the pinnacle works from Technics ,made in the golden age of vinyl. Production could not be surpassed, even in the 21. century. It is playing so smooth and with an huge audio landscapeMind the low output(its the spec), you need a Riaa amp with sufficient correction. The stylus guard is working fineThe description is accurate and there will be no returns accepted on this unitOfficial specification: Type: MM, One-point suspension Magnetic Circuit All HPF core, precision ground finish Cantilever: Pure boron tapered pipe Damper: TTDD (Technics Temperature Defence Damper) Magnet: Disc-shaped samarium-cobalt (BH) max.=30MG Oe Frequency response: 5-120,000 Hz Output voltage: 1.2 mv (1 kHz), 5cm/s. zero to peak, lateral velocity (3.4 mV 1 kHz, 10 cm/s. zero topeak, 45 degrees velocity, DIN 45 500) Channel seperation: More than 25 db (1 kHz), More than 20 db (10 kHz) Channel balance: Within 0.5 db (1 kHz) Compliance: 12x10-6cm/dyne (100Hz, dynamic) DC resistance: 30 Ohm (we measure about 37-40 ohms) Inductance: 33 mH Impedance: 210 Ohm (1 kHz) L Recommended load resistance: 10kOhm~1MOhm Recommended load capacitance: Less than 500 pF Stylus tip: Linear elliptical stylus Effective moving mass: 0.055 mg Stylus pressure range: 1.25 +-0.25 g

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Technics EPC-100C MK2 Stereo MM Moving Magnet Cartridge Phono Pick-up Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. Overview Pure boron cantilever is used for the cantilever. This material, which is difficult to make into a solid bar, is refined into a pipe shape by a special manufacturing process to achieve light weight and high strength. Furthermore, a laser beam is used to process the tip mount hole for mounting the needle tip tip in pursuit of precision, resulting in an extremely small effective mass of the resonator and pushing the high frequency resonance frequency out of the audible range. The TTDD (Technics Temperature Defense Damper) developed by Technics is used. Compared to commonly used butyl rubber, this damper material has about 1/3 of the temperature dependence, and has excellent viscoelasticity and excellent cantilever support performance. As a result, there is almost no deterioration in sound quality and tracing performance due to temperature changes in the room. In the magnetic circuit, mirror-polished HPF cores are used for all magnetic materials such as pole pieces and yokes to obtain excellent transmission characteristics.In addition, the left and right channels are completely separated in the HPF magnetic circuit to achieve a symmetrical arrangement, thereby reducing imbalance between channels in terms of various characteristics. A single-point suspension system is employed, in which a disk-shaped magnet is placed at the base of the cantilever, which is attached to the support pipe by suspension wires via a disk-shaped damper.This clearly unifies the fulcrum just behind the magnet, preventing the generation of intermodulation distortion due to the back-and-forth change of the cantilever and the deterioration of high-frequency characteristics due to the increase of equivalent mass from the needle tip perspective. The low inductance design minimizes the effect of addition, resulting in high performance.The DC resistance is also designed to be extremely small, resulting in low noise due to the resistive component in the amplifier input stage and a high signal-to-noise ratio. Specifications Type: MM CartridgeMagnetic Circuit: Mirror-polished HPF core used in all magnetic circuitsCantilever: Pure boron pipeDamper: TTDD (Technics Temperature Defense Damper)Magnet: Sm-Co(BH)max 30MG-OeFrequency Response: 20Hz to 15kHz ±0.3dBFrequency range: 10Hz to 60kHzTemperature Characteristics (5°C to 35°C): ±1dB(10kHz), ±3dB(20kHz, 1kHz reference)Output voltage: 1.3mV (1kHz, 5cm/sec, zero to peak, horizontal velocity), 1.8mV (1kHz, 5cm/sec, zero to peak, 45? velocity)Channel separation: 25dB or better (1kHz), 20dB or better (10kHz)Channel balance: within 0.5dB (1kHz)Compliance: 12x10-6cm/dyne (100Hz)DC resistance: 30?Inductance: 33mHImpedance: 210?(1kHz)Recommended Load Resistance: 10k? to 1M?Recommended Load Capacitance: 500pF or lessTransducer effective mass: 0.23mgNeedle Pressure Range: 1.25g±0.25gOverhang Adjustment Range: 52±3mm (distance from the tip of the needle to the reference surface of the shell)Cartridge tilt angle: ±2° to the left and rightWeight: 18.3gReplacement needle: EPS-100ED2 Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

DescriptionOperation verified.Please check photos for condition. AC100VShipping Fedex,DHL,Japan Post *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.Read more... Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Original Technics EPA-B500 EPA-100MK2 Phono Cord Cable gold plated in excellent condition.

Description Its genuine. Payment Please make a payment within 3 days otherwise automatically unpaid case will be opened. Shipping Ships within 5-10 business days (Monday to Friday). It will be shipped from Japan by airmail including tracking number and insurance. It will take 1-3 weeks to deliver, depending on the country and location.International Buyers - Please Note import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

Technics EPA-100 EPA-100mk2 Sub Counterweight Gold Used Japan DescriptionUsedShippingFedEx or UPS or Japan PostInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.