Technics EPA-500 [ EPA-A501H EPA-B500 ] Dynamic Damping System Tone Arm #7 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Operation has been confirmed with the following contents.Output from both channels.Lifter descent speed.Height adjustment, etc. There is no problem in operation. *Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. *The black pedestal of the base is for photographic purposes only and is not included. Overview System tone arm set including arm base EPA-B500 and arm unit EPA-A501H. EPA-B500The EPA-B500 is an arm base to which an arm unit can be attached. The EPA-B500 uses a structure that allows arm units to be interchangeable, while employing a unique gimbal suspension bearing structure that is used in Technic Tone Arms.The gimbal suspension system is a four-point support system using high-precision pivots and ball bearings, and the axial centers of the horizontal and vertical rotation axes intersect at a single point to achieve a high initial sensitivity of 7 mg or less for both horizontal and vertical rotation.The bearing is supported by a precision zinc die-cast base to thoroughly suppress external vibration. Furthermore, a reliable sliding connector is used for the arm unit and arm base to achieve a self-cleaning effect when replacing the unit. An arm height adjustment mechanism with a 12-way helicoid is provided for highly accurate arm height adjustment. The output cord has low DC resistance of 39.5m?/m and low capacitance (41.5pF/m) for excellent transmission characteristics. EPA-A501HThe EPA-A501H is an arm unit for high compliance cartridges. This arm unit inherits the functions of the EPA-100 and uses a unique dynamic damping mechanism for the balance weight, which improves the low-frequency resonance sharpness of the arm unit by more than 6dB compared to a normal arm. Furthermore, unlike the oil dump damping system, the damping characteristics below the low-frequency resonance frequency are improved without increasing the mechanical impedance of the low-frequency range. This dramatically reduces resonance peaks and improves low-frequency characteristics by selecting an arm unit that matches the cartridge. Titanium nitride (TiN), a lightweight and strong titanium that has been specially nitrided to increase rigidity, is used as the pipe material for the arm unit. This eliminates partial resonance of the tone arm, and the ideal distribution of mechanical strength reduces weight by 85% compared to conventional aluminum pipes, while achieving mechanical strength 1.6 times greater. Specifications Model: System tone arm

Description & Condition Product DescriptionTechnics EPA-B500 EPA-A501H Tone Arm with Dedicated PHONO Cable Arm Base: EPA-B500/Arm Unit: EPA-A501HA system tone arm with interchangeable arm units. Optional accessoriesEPA-A501M for medium compliance cartridges and EPA-A501L for low compliance cartridges are available, allowing you to enjoy a variety of pipes for sound. ?Condition Each part has been polished/cleaned. The arm is in good condition with no noticeable damage and a glossy finish. There is no major damage to the cables and other accessories. Overall, it is in good condition.We consider it to be a good product considering its age. This is a used product that has been around for a long time.Please understand that there may be scratches, dullness, and signs of wear due to age/use before bidding. The criteria for judging the condition check column are selected by our staff based on certain standards of our company, which handles vintage audio.Since the perception of condition varies from person to person, there may be differences from your standards.Please check the images carefully and make your decision.We are also accepting questions about the condition, so please feel free to contact us. ? OperationWe have confirmed the operation with our own equipment.? Output from both channels? Lifter descent speed? Each adjustment point, operation feel? Height adjustment, etc.There are no problems with operation. We conduct thorough product checks, but in the unlikely event that an initial malfunction occurs,please rest assured that we will respond with a free repair or return and refund within one week of arrival.In the event of a malfunction, please return the product at our own expense.Please note that the shipping fee will be borne by the successful bidder for returns other than initial malfunctions.After receiving the returned product, we will check the condition and refund the money. ?Product DetailsManufacturer: TechnicsModel Number: EPA-B500/EPA-A501HArm Unit: EPA-A501H (Straight Arm) ?Accessories- Lead Wires x 4 (already installed)- PHONO Cable (Technics)- Arm Fixing Screws x 3- Instruction Manual (Copy)- Template (Copy) The black stand used to hold the arm up is not included. *Everything in the photo is included except for our companys equipment in the background. Please check. Shipping We ship using FedEx, DHL and Japan Post. Payment We usually ship within 10 business days of receiving cleared payment. . International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Technics EPA-500 [ EPA-A501H EPA-B500 ] Dynamic Damping System Tone Arm #6 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Operation has been confirmed with the following contents.Output from both channels.Lifter descent speed.Height adjustment, etc. There is no problem in operation. *Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. *The black pedestal of the base is for photographic purposes only and is not included. Overview System tone arm set including arm base EPA-B500 and arm unit EPA-A501H. EPA-B500The EPA-B500 is an arm base to which an arm unit can be attached. The EPA-B500 uses a structure that allows arm units to be interchangeable, while employing a unique gimbal suspension bearing structure that is used in Technic Tone Arms.The gimbal suspension system is a four-point support system using high-precision pivots and ball bearings, and the axial centers of the horizontal and vertical rotation axes intersect at a single point to achieve a high initial sensitivity of 7 mg or less for both horizontal and vertical rotation.The bearing is supported by a precision zinc die-cast base to thoroughly suppress external vibration. Furthermore, a reliable sliding connector is used for the arm unit and arm base to achieve a self-cleaning effect when replacing the unit. An arm height adjustment mechanism with a 12-way helicoid is provided for highly accurate arm height adjustment. The output cord has low DC resistance of 39.5m?/m and low capacitance (41.5pF/m) for excellent transmission characteristics. EPA-A501HThe EPA-A501H is an arm unit for high compliance cartridges. This arm unit inherits the functions of the EPA-100 and uses a unique dynamic damping mechanism for the balance weight, which improves the low-frequency resonance sharpness of the arm unit by more than 6dB compared to a normal arm. Furthermore, unlike the oil dump damping system, the damping characteristics below the low-frequency resonance frequency are improved without increasing the mechanical impedance of the low-frequency range. This dramatically reduces resonance peaks and improves low-frequency characteristics by selecting an arm unit that matches the cartridge. Titanium nitride (TiN), a lightweight and strong titanium that has been specially nitrided to increase rigidity, is used as the pipe material for the arm unit. This eliminates partial resonance of the tone arm, and the ideal distribution of mechanical strength reduces weight by 85% compared to conventional aluminum pipes, while achieving mechanical strength 1.6 times greater. Specifications Model: System tone arm

Technics EPA-A501H tonearm with special case and audiotechnica E50 cartridge Description Condition: Product name: Technics EPA-A501H tone arm with special caseAccessories: audiotechnica E50*All items shown in the photo are included.Product condition: In working orderPlease bid with the understanding that this is an item that has been stored for a long time and has been almost unused, in like-new condition.There are chips on the top and bottom of the case cover.Product appearance: No major stains, close to new Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Technics EPA-500 [ EPA-A501H EPA-B500 ] Dynamic Damping System Tone Arm #5 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Operation has been confirmed with the following contents.Output from both channels.Lifter descent speed.Height adjustment, etc. There is no problem in operation. *Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. *The black pedestal of the base is for photographic purposes only and is not included. Overview System tone arm set including arm base EPA-B500 and arm unit EPA-A501H. EPA-B500The EPA-B500 is an arm base to which an arm unit can be attached. The EPA-B500 uses a structure that allows arm units to be interchangeable, while employing a unique gimbal suspension bearing structure that is used in Technic Tone Arms.The gimbal suspension system is a four-point support system using high-precision pivots and ball bearings, and the axial centers of the horizontal and vertical rotation axes intersect at a single point to achieve a high initial sensitivity of 7 mg or less for both horizontal and vertical rotation.The bearing is supported by a precision zinc die-cast base to thoroughly suppress external vibration. Furthermore, a reliable sliding connector is used for the arm unit and arm base to achieve a self-cleaning effect when replacing the unit. An arm height adjustment mechanism with a 12-way helicoid is provided for highly accurate arm height adjustment. The output cord has low DC resistance of 39.5m?/m and low capacitance (41.5pF/m) for excellent transmission characteristics. EPA-A501HThe EPA-A501H is an arm unit for high compliance cartridges. This arm unit inherits the functions of the EPA-100 and uses a unique dynamic damping mechanism for the balance weight, which improves the low-frequency resonance sharpness of the arm unit by more than 6dB compared to a normal arm. Furthermore, unlike the oil dump damping system, the damping characteristics below the low-frequency resonance frequency are improved without increasing the mechanical impedance of the low-frequency range. This dramatically reduces resonance peaks and improves low-frequency characteristics by selecting an arm unit that matches the cartridge. Titanium nitride (TiN), a lightweight and strong titanium that has been specially nitrided to increase rigidity, is used as the pipe material for the arm unit. This eliminates partial resonance of the tone arm, and the ideal distribution of mechanical strength reduces weight by 85% compared to conventional aluminum pipes, while achieving mechanical strength 1.6 times greater. Specifications Model: System tone arm

Near Mint Technics EPA-A501H tonearm w/special case audiotechnica E50 cartridge Description Condition: Used In good working order/almost new Technics EPA-A501H tonearm with special case and audiotechnica E50 cartridge ys025 Product Name: Technics EPA-A501H Tonearm, Comes with a Dedicated Case and Audio-Technica E50 Cartridge Included Items: As shown in the photo. Condition: Fully functional. This item appears to be in near-mint condition, having been stored for an extended period with minimal use. Please understand that this is a long-term storage item. There are some chips on the top and bottom of the case cover. Due to pre-packaging, I cannot answer detailed questions. Item Condition Rating: ExNEW: Brand new, unused Ex: Like new, with no significant dirt or stains A: Minor scratches or stains, but generally in excellent condition B: Noticeable scratches, stains, or other damage C: Significant damage, considered junk Note: The condition rating is based solely on the appearance and is subjective. It does not guarantee functionality. Payment Please pay within 5 days after the auction closed. Shipping Only residents of the purchasing area are eligible to make purchases. If you really want the product and are not a resident, please contact us separately for assistanceTo save on shipping costs, foldable clothes and bags may be shipped folded. Please understand this. Returns Returns are free of charge, and refunds will be processed through eBay. However, please note that returns due to size or specification differences on the buyers end will not be accepted under any circumstances. Each brand has its own size and specification characteristics. For example, EU sizes or measurements in centimeters may vary slightly depending on the brand. International Buyers - Please Note: Import duties, taxes, and additional charges are not covered within the listed item price or shipping fees. These expenses fall under the responsibility of the purchaser.Before engaging in any bidding or purchasing activity, its advisable to consult with your countrys customs office to ascertain the potential costs involved.Typically, these additional charges are collected by the shipping company upon delivery or during item retrieval. Its crucial to distinguish these charges from supplementary shipping fees to avoid confusion.Adherence to governmental regulations prohibits the undervaluation of merchandise or mislabeling items as gifts. All products and shipments originate from Japan. In cases where specific details are not provided, the standard voltage for electrical appliances is typically AC100V. For instance, consider the voltage disparity between Japan and the United States, where the standard voltage diverges to AC200V. This discrepancy underscores the necessity of employing a voltage transformer to mitigate the risk of electrical malfunctions. Therefore, ensuring compatibility with electrical specifications is imperative for seamless functionality and longevity of your appliances.

Technics EPA-500 [ EPA-A501H EPA-B500 ] Dynamic Damping System Tone Arm #5 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Operation has been confirmed with the following contents.Output from both channels.Lifter descent speed.Height adjustment, etc. There is no problem in operation. *Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. *The black pedestal of the base is for photographic purposes only and is not included. Overview System tone arm set including arm base EPA-B500 and arm unit EPA-A501H. EPA-B500The EPA-B500 is an arm base to which an arm unit can be attached. The EPA-B500 uses a structure that allows arm units to be interchangeable, while employing a unique gimbal suspension bearing structure that is used in Technic Tone Arms.The gimbal suspension system is a four-point support system using high-precision pivots and ball bearings, and the axial centers of the horizontal and vertical rotation axes intersect at a single point to achieve a high initial sensitivity of 7 mg or less for both horizontal and vertical rotation.The bearing is supported by a precision zinc die-cast base to thoroughly suppress external vibration. Furthermore, a reliable sliding connector is used for the arm unit and arm base to achieve a self-cleaning effect when replacing the unit. An arm height adjustment mechanism with a 12-way helicoid is provided for highly accurate arm height adjustment. The output cord has low DC resistance of 39.5m?/m and low capacitance (41.5pF/m) for excellent transmission characteristics. EPA-A501HThe EPA-A501H is an arm unit for high compliance cartridges. This arm unit inherits the functions of the EPA-100 and uses a unique dynamic damping mechanism for the balance weight, which improves the low-frequency resonance sharpness of the arm unit by more than 6dB compared to a normal arm. Furthermore, unlike the oil dump damping system, the damping characteristics below the low-frequency resonance frequency are improved without increasing the mechanical impedance of the low-frequency range. This dramatically reduces resonance peaks and improves low-frequency characteristics by selecting an arm unit that matches the cartridge. Titanium nitride (TiN), a lightweight and strong titanium that has been specially nitrided to increase rigidity, is used as the pipe material for the arm unit. This eliminates partial resonance of the tone arm, and the ideal distribution of mechanical strength reduces weight by 85% compared to conventional aluminum pipes, while achieving mechanical strength 1.6 times greater. Specifications Model: System tone arm

Manufacturer?SMEModel number?3009 Series II improved AccessoriesMain weight / Needle pressure weightInside force canceller weight/pulleyWood Screws x 4RCA cable (SME)Instruction manual (copy)Alignment Protractor (copy)Mounting plate (copy) Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Technics EPA-A501H Titanium Nitride ? 6-8 Replacement Arm W/ original Box Item Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

Technics EPA-A501H Straight Tonearm Arm Pipe Tube [Junk] Item Description This unit is very good condition including a few minor scratches and scuffs on the body. (please see photos). cable and weight, not connect junk item Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx Technics EPA-A501H Straight Tonearm & EPA-B500 Arm Base Set w/ PHONO Cable ..etc. Straight Tonearm: EPA-A501H / Arm Base: EPA-B500 Arm unit replaceable system tonearm. A variety of pipes are available, including the optional EPA-A501M arm unit for medium-compliance cartridges and the EPA-A501L arm unit for low-compliance cartridges, allowing you to enjoy different sounds. ?ConditionEach part has been polished/cleaned. The arm is shiny and in very good condition with no noticeable damage. There is no major damage to accessories such as cables. It is in very good overall condition. Considering its age, we judge it to be a very good product. ?Operation? We have confirmed the operation using our equipment.?There are no problems with the operation of the output from both channels, the lifters descending speed, each adjustment point, operational feel, and height adjustment. ?Product ContentsManufacturer: TechnicsArm Base: EPA-B500Arm Unit: EPA-A501H (Straight Arm) ?Accessories?Lead wires x 4 (already installed)?PHONO cable (Technics)?arm fixing screws x 3?instruction manual (copy)?template (copy)?The black stand in the photo on which the arm is propped up is not included. ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Technics EPA-500 [ EPA-A501H EPA-B500 ] Dynamic Damping System Tone Arm #3 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Operation has been confirmed with the following contents.Output from both channels.Lifter descent speed.Height adjustment, etc. There is no problem in operation. *Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. *The black pedestal of the base is for photographic purposes only and is not included. Overview System tone arm set including arm base EPA-B500 and arm unit EPA-A501H. EPA-B500The EPA-B500 is an arm base to which an arm unit can be attached. The EPA-B500 uses a structure that allows arm units to be interchangeable, while employing a unique gimbal suspension bearing structure that is used in Technic Tone Arms.The gimbal suspension system is a four-point support system using high-precision pivots and ball bearings, and the axial centers of the horizontal and vertical rotation axes intersect at a single point to achieve a high initial sensitivity of 7 mg or less for both horizontal and vertical rotation.The bearing is supported by a precision zinc die-cast base to thoroughly suppress external vibration. Furthermore, a reliable sliding connector is used for the arm unit and arm base to achieve a self-cleaning effect when replacing the unit. An arm height adjustment mechanism with a 12-way helicoid is provided for highly accurate arm height adjustment. The output cord has low DC resistance of 39.5m?/m and low capacitance (41.5pF/m) for excellent transmission characteristics. EPA-A501HThe EPA-A501H is an arm unit for high compliance cartridges. This arm unit inherits the functions of the EPA-100 and uses a unique dynamic damping mechanism for the balance weight, which improves the low-frequency resonance sharpness of the arm unit by more than 6dB compared to a normal arm. Furthermore, unlike the oil dump damping system, the damping characteristics below the low-frequency resonance frequency are improved without increasing the mechanical impedance of the low-frequency range. This dramatically reduces resonance peaks and improves low-frequency characteristics by selecting an arm unit that matches the cartridge. Titanium nitride (TiN), a lightweight and strong titanium that has been specially nitrided to increase rigidity, is used as the pipe material for the arm unit. This eliminates partial resonance of the tone arm, and the ideal distribution of mechanical strength reduces weight by 85% compared to conventional aluminum pipes, while achieving mechanical strength 1.6 times greater. Specifications Model: System tone arm

Technics EPA-B500 EPA-A501H Tonearm Straight w/ PHONO Cable Excellent from Japan Description Condition: Used Technics EPA-B500 EPA-A501H Tonearm?ConditionEach part has been polished and cleaned.There is no noticeable damage to the arm and it is shiny and beautiful. There is no major damage to the accessories such as cables. It is in a beautiful condition overall. Considering the age, we judge it to be a beautiful product.?OperationWe have confirmed that the product works well. There are no problems with the output from both channels, the lowering speed of the lifter, the various adjustment points, the feel of operation, the height adjustment ..etc.?Product DetailsManufacturer: TechnicsModel Number: EPA-B500/EPA-A501HArm Unit: EPA-A501H (straight arm)?Accessories?4 Lead Wires (already installed)?PHONO Cable (Technics)?3 Arm Fixing Screws?Instruction Manual (copy)?Template (copy) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Technics EPA-A501E Titanium Nitride ? 6-8 Replacement Arm W/ original Box Item Description This unit is in excellent condition (please see photos). This tonearm has been checked and tested and confirmed working perfectly. cartridge not including Shipping Policy We ship the item via DHL with a tracking number. The item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

Tested and fully working. Amplifier only. No speakers. 2nd photo to show tested. Used and in decent condition with few scratches. See all photos. This Technics SU-X501 Hi Fi integrated amplifier is a superb addition to any home stereo set-up. With its sleek black design and Technics brand quality, its sure to impress. This unit type is a must-have for any serious audiophile looking for a top-quality sound experience. The model is specifically designed to deliver exceptional sound quality and power, making it the perfect choice for music lovers who demand nothing but the best. Its phono input ensures that you can connect it to your turntable and enjoy your vinyl collection in all its glory.

Tested and fully working. Amplifier only. No speakers. 2nd photo to show tested. Used and in decent condition with few scratches. See all photos. This Technics SU-X501 Hi Fi integrated amplifier is a superb addition to any home stereo set-up. With its sleek black design and Technics brand quality, its sure to impress. This unit type is a must-have for any serious audiophile looking for a top-quality sound experience. The model is specifically designed to deliver exceptional sound quality and power, making it the perfect choice for music lovers who demand nothing but the best. Its phono input ensures that you can connect it to your turntable and enjoy your vinyl collection in all its glory.

????Including & Condition Details: As shown in photos. ?Condition There is no noticeable damage overall and it is shiny and beautiful.Considering its age, we consider it to be in very good condition. ?Operation The operation has been confirmed. Works Perfectly! ?Product contents Manufacturer: Technics Model number: EPA-A501H ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable. ________________________________________________________________________________________________________ (If purchased for shipping out of U.S.A. additional taxes and duties may be added to price)

Technics EPA-B500 EPA-A501H Dynamic Damping Universal System Tonearm Pickup Arm Domo Arigato! Welcome, Thank you for your visit. Description Universal type system tone arm that combines the EPA-B500 tone arm arm base unit and the EPA-A501H tone arm unit. The EPA-A501H is an arm unit for high compliance cartridges. Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. *The black pedestal of the base is for photographic purposes only and is not included.*There is no original box.*Turntables and other equipment (excluding accessories for the unit) shown in the photos are for presentation purposes only and are not part of the product. Specifications < Tone Arm Base Unit EPA-B500 >Type: Arm replacement type arm baseBearing structure: Gimbal suspension systemHeight adjustment range: 42mm-62mm (from base mounting surface to pipe center), helicoid: 20mmInitial sensitivity: 7mg or less (horizontal, vertical)Output cord DC resistance: 39.5m?/mOutput cord capacitance: 41.5pF/mArm base mounting hole: ?62mm < Tone Arm Unit EPA-A250 >Type: Dynamic damping type arm unitArm effective length: 250mmArm rear length range: max. 93mm (from arm fulcrum)Overhang: 15mmHorizontal tracking error angle: +1?6(inner circumference of 30cm record), +2?6(outer circumference of 30cm record)Arm effective weight: 14g (without cartridge)Stylus pressure adjustment range: 0 to 2gHead shell weight: 7.5gCompatible cartridge weight: 6g~8g, 3g~6g(with shell weight), 10.5g to 12.5g (with auxiliary weight) Accessories PHONO cableArm fixing screws x 3Instruction Manual (copy) (Japanese)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Turntable base for Technics SP-10mkII and SP-20. With the structure of natural obsidian with large specific gravity and excellent vibration characteristics, visco-elastic material and wood base, excellent vibration isolation characteristics are obtained. Uses a large insulator with improved vibration isolation characteristics. Includes a removable acrylic molded dust cover. Already installed is a Tecnics EPA-A50 tonearm and Stanton 881-S cartridge. All you need is the turntable.