The vintage TEAC AS-200S pre-main amplifier stands out for its innovative design and superior audio performance. With a full-scale differential amplifier circuit and double power supply system, it eliminates capacitors from the output circuit, enhancing transient characteristics in the low-frequency range. Special attention to the I/O circuit allows simultaneous recording on two tape decks, adding versatility to the setup. The preamp section utilizes carefully selected FETs for low noise operation, ensuring stability regardless of impedance change or input size. Additionally, the phono amplifier features a new 3-stage direct connection circuit for improved voltage utilization factor, while the tone control employs a highly accurate 3-dB-step switching method to eliminate channel imbalance. With its advanced features and meticulous design, the TEAC AS-200S offers exceptional audio quality and flexibility for vintage audio enthusiasts. Amplifier is in good workng condition. The front looks pretty good with some usage marks visible. The woodemn sides and top look not that bad too. Only issue is that trough the years the cabinet has lost some is stability. It is definitly not falling apart but there is some wiggle room in the cabnet. Amplifier is fully tested and sounds great 200S series integrated amplifier which was upgraded from AS-200 Specifications:Type Pre-main amplifierCircuit system Differential-type quasi complimentary service SEPPPower Amplifier UnitRated output (0.5% distortion rate, ± 0.5 dB) 60W + 60W (4 ?)50W + 50W (8 ?)Distortion Factor (1 kHz) 0.5% or Less (Rated Output)0.1% or Less (at 30W Output)0.1% or Less (at 100 mW Output)Cross modulation distortion factor 0.5% or Less (4 ? at 40W output)Frequency characteristic 20 Hz to 80 kHz + 0 -1dBPower Band Width 20 Hz to 30 kHzResidual noise 0.5 mV or lessInput impedance 25k ? or moreSensitivity 0.7 V (at rated output)Preamplifier SectionOutput (at cartridge 2 mv) Pre out:1.25VRec out:150mVCenter ch : 1 v (at rated output)Input Sensitivity / Impedance Phono1 : 2mV/50k ?Phono2 : 2mV/80k ?Tuner, Aux1/2, Tape1/2 : 130mV/100k ?Record and Reconnector (Din)Frequency characteristic Tuner, Aux, Tape : 30 Hz to 30 kHz + 0 -2dB* Built-in filter of 30 Hz or less for speaker protection)RIAA deviation ± 0.5 dBDistortion Factor (at 1 v output) 0.1% or Less (1 kHz)0.1% or Less (30 Hz)0.1% or Less (20 kHz)Tone control Bass : ± 15 dB or more (50 Hz)Treble : ± 15 dB or more (10 kHz)Loudness + 5 dB or more (100 Hz)Low-cut filter 100 Hz, -12dB/oct.High-cut filter 9 kHz, -12dB/oct.Signal-to-noise ratio (IHF) Phono1/2 : 70 dB or moreHigh level : 90 dB or higherSemiconductor used NPN transistor : 25 pcsPNP Transistor : 15FET : 2Diode : 13 pcsPwer 100 VAC, 50Hz/60HzPower consumption 22W (No signal)180W (at rated output)External dimensions Width 419x Height 151x Depth 297 mmWeight Approx. 9.5 kgVoltage: 220VCables : Not included Working condition: Fully Working (See pictures for the cosmetic condition of this lot)Missing or damages: Medium Usage Marks -We ship worldwide.We offer combine shipping (EU 30KG max, NON EU 20KG max) for all our listings, ask us for details Please note: ??Whenever an item exceeds the weight noted above. Please ask for a shipping quote before making a purchase. The shipping costs are estimated in our shop because we do not know the shipping address. -Shipping in the EU up to 30 KG (max)-Shipping outside of the EU up to 20 KG (max) Picking up the item is also possible. It can either be picked up in Alkmaar or Soest on appointment Delivery by us is also possible in some cases. Please reach out to us for more information about deliveries

TEAC AS-100 Stereo Integrated Amplifier JAPAN WORK. Condition is Used. Shipped with UPS Ground. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.2% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 80dB (line) Output: 150mV (line) Speaker load impedance: 4? to 16? Semiconductors: 26 x transistors, 2 x IC, 2 x thyristors, 9 x diodes The photos accurately depict the appearance and condition of the item. Youll get only what you see. 48 Continental States ONLY. Shipping to AK, HI and Canada will be more and added to PayPal invoice. International bidders ask for shipping before bid. We only ship to the confirmed PayPal address. We dont accept P.O.BOXES - please provide a physical address!

Turns on and motor spins but needs a belt! Also needs a needle! And needs a rubber plate and 45 cap! Other than that it turns on and spins! Sold as is

TEAC AS-100 Stereo Integrated Amplifier JAPAN WORK. Condition is Used. Shipped with UPS Ground. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.2% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 80dB (line) Output: 150mV (line) Speaker load impedance: 4? to 16? Semiconductors: 26 x transistors, 2 x IC, 2 x thyristors, 9 x diodes The photos accurately depict the appearance and condition of the item. Youll get only what you see. 48 Continental States ONLY. Shipping to AK, HI and Canada will be more and added to PayPal invoice. International bidders ask for shipping before bid. We only ship to the confirmed PayPal address. We dont accept P.O.BOXES - please provide a physical address!

Item TitleShowa Retro Manual Amplifier Tuner Cassette Deck Etc. Victor Trio Technics Teac Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

TEAC AS-100 Stereo Integrated Amplifier JAPAN WORK. Condition is Used. Shipped with UPS Ground. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.2% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 80dB (line) Output: 150mV (line) Speaker load impedance: 4? to 16? Semiconductors: 26 x transistors, 2 x IC, 2 x thyristors, 9 x diodes The photos accurately depict the appearance and condition of the item. Youll get only what you see. 48 Continental States ONLY. Shipping to AK, HI and Canada will be more and added to PayPal invoice. International bidders ask for shipping before bid. We only ship to the confirmed PayPal address. We dont accept P.O.BOXES - please provide a physical address!

FOR PARTS ONLY! OR IF YOU CAN FIX IT, THATS GREAT NOTHING MOVES!!! PLUGGED AND THATS IT, NO POWER.SELLING AS IS ONLY, FOR PARTS OR YOU CAN FIX IT

The vintage TEAC AS-200S pre-main amplifier stands out for its innovative design and superior audio performance. With a full-scale differential amplifier circuit and double power supply system, it eliminates capacitors from the output circuit, enhancing transient characteristics in the low-frequency range. Special attention to the I/O circuit allows simultaneous recording on two tape decks, adding versatility to the setup. The preamp section utilizes carefully selected FETs for low noise operation, ensuring stability regardless of impedance change or input size. Additionally, the phono amplifier features a new 3-stage direct connection circuit for improved voltage utilization factor, while the tone control employs a highly accurate 3-dB-step switching method to eliminate channel imbalance. With its advanced features and meticulous design, the TEAC AS-200S offers exceptional audio quality and flexibility for vintage audio enthusiasts. Amplifier is in good workng condition. The front looks pretty good with some usage marks visible. The woodemn sides and top look not that bad too. Only issue is that trough the years the cabinet has lost some is stability. It is definitly not falling apart but there is some wiggle room in the cabnet. Amplifier is fully tested and sounds great 200S series integrated amplifier which was upgraded from AS-200 Specifications:Type Pre-main amplifierCircuit system Differential-type quasi complimentary service SEPPPower Amplifier UnitRated output (0.5% distortion rate, ± 0.5 dB) 60W + 60W (4 ?)50W + 50W (8 ?)Distortion Factor (1 kHz) 0.5% or Less (Rated Output)0.1% or Less (at 30W Output)0.1% or Less (at 100 mW Output)Cross modulation distortion factor 0.5% or Less (4 ? at 40W output)Frequency characteristic 20 Hz to 80 kHz + 0 -1dBPower Band Width 20 Hz to 30 kHzResidual noise 0.5 mV or lessInput impedance 25k ? or moreSensitivity 0.7 V (at rated output)Preamplifier SectionOutput (at cartridge 2 mv) Pre out:1.25VRec out:150mVCenter ch : 1 v (at rated output)Input Sensitivity / Impedance Phono1 : 2mV/50k ?Phono2 : 2mV/80k ?Tuner, Aux1/2, Tape1/2 : 130mV/100k ?Record and Reconnector (Din)Frequency characteristic Tuner, Aux, Tape : 30 Hz to 30 kHz + 0 -2dB* Built-in filter of 30 Hz or less for speaker protection)RIAA deviation ± 0.5 dBDistortion Factor (at 1 v output) 0.1% or Less (1 kHz)0.1% or Less (30 Hz)0.1% or Less (20 kHz)Tone control Bass : ± 15 dB or more (50 Hz)Treble : ± 15 dB or more (10 kHz)Loudness + 5 dB or more (100 Hz)Low-cut filter 100 Hz, -12dB/oct.High-cut filter 9 kHz, -12dB/oct.Signal-to-noise ratio (IHF) Phono1/2 : 70 dB or moreHigh level : 90 dB or higherSemiconductor used NPN transistor : 25 pcsPNP Transistor : 15FET : 2Diode : 13 pcsPwer 100 VAC, 50Hz/60HzPower consumption 22W (No signal)180W (at rated output)External dimensions Width 419x Height 151x Depth 297 mmWeight Approx. 9.5 kgVoltage: 220VCables : Not included Working condition: Fully Working (See pictures for the cosmetic condition of this lot)Missing or damages: Medium Usage Marks -We ship worldwide.We offer combine shipping (EU 30KG max, NON EU 20KG max) for all our listings, ask us for details Please note: ??Whenever an item exceeds the weight noted above. Please ask for a shipping quote before making a purchase. The shipping costs are estimated in our shop because we do not know the shipping address. -Shipping in the EU up to 30 KG (max)-Shipping outside of the EU up to 20 KG (max) Picking up the item is also possible. It can either be picked up in Alkmaar or Soest on appointment Delivery by us is also possible in some cases. Please reach out to us for more information about deliveries

TEAC AS-100 Stereo Integrated Amplifier JAPAN WORK. Condition is Used. Shipped with UPS Ground. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.2% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 80dB (line) Output: 150mV (line) Speaker load impedance: 4? to 16? Semiconductors: 26 x transistors, 2 x IC, 2 x thyristors, 9 x diodes The photos accurately depict the appearance and condition of the item. Youll get only what you see. 48 Continental States ONLY. Shipping to AK, HI and Canada will be more and added to PayPal invoice. International bidders ask for shipping before bid. We only ship to the confirmed PayPal address. We dont accept P.O.BOXES - please provide a physical address! Taxes and import charges When you sell on eBay, youre responsible for complying with all applicable tax laws. If youre selling to buyers outside the US, you should inform them about the potential import charges theyll need to pay when they receive their item.

Very RARE, Vintage Teac CA 1000 Integrated Stereo Amplifier with Cassette Deck. Unit is in good working and cosmetic condition, amplifier all functions work and it sound very good. Cassette deck Play, FF, RW, Record, work and deck sound good too. Unit was serviced last year, mechanism cleaned and lubricated, and all controls cleaned with DeoxIT. SEE PICTURES for DETAILS It was TESTED and it is working Very Well, but as with all used vintage electronics - It is being SOLD AS-IS ...MEANING NO RETURN...SALE IS FINAL!!! Payment must be received within 3 days of auction end. SHIPPING RATE INCLUDES DELIVERY TRACKING CONFIRMATION FREE Shipping in Continental US ONLY, shipping to Hawaii, Alaska and US Territories will required additional charge. E-mail with any questions BEFORE YOU BID/BUY and good bidding. Please leave me feedback after you receive your product. I will then know you have received your purchase and are satisfied. Do to the fact that I have given twice the amount of feedback than I have received, I will be leaving feedback for you as soon as I see that feedback has been left for me.

Please review the pictures and video to assess the condition of the item. I ship using eBay Delivery which includes Royal Mail, Yodel, and DPD, as well as worldwide shipping through the eBay global shipping program (GSP). I have experience in sending delicate items, so you can trust that your item will be securely packaged to ensure safe shipping. Please reach out to me with any issues before leaving negative/neutral feedback or low detail ratings, as I am always committed to resolving any problems that may arise.

TEAC AS-100 Stereo Integrated Amplifier JAPAN WORK. Condition is Used. Shipped with UPS Ground. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.2% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 80dB (line) Output: 150mV (line) Speaker load impedance: 4? to 16? Semiconductors: 26 x transistors, 2 x IC, 2 x thyristors, 9 x diodes The photos accurately depict the appearance and condition of the item. Youll get only what you see. 48 Continental States ONLY. Shipping to AK, HI and Canada will be more and added to PayPal invoice. International bidders ask for shipping before bid. We only ship to the confirmed PayPal address. We dont accept P.O.BOXES - please provide a physical address! Taxes and import charges When you sell on eBay, youre responsible for complying with all applicable tax laws. If youre selling to buyers outside the US, you should inform them about the potential import charges theyll need to pay when they receive their item.

The vintage TEAC AS-200S pre-main amplifier stands out for its innovative design and superior audio performance. With a full-scale differential amplifier circuit and double power supply system, it eliminates capacitors from the output circuit, enhancing transient characteristics in the low-frequency range. Special attention to the I/O circuit allows simultaneous recording on two tape decks, adding versatility to the setup. The preamp section utilizes carefully selected FETs for low noise operation, ensuring stability regardless of impedance change or input size. Additionally, the phono amplifier features a new 3-stage direct connection circuit for improved voltage utilization factor, while the tone control employs a highly accurate 3-dB-step switching method to eliminate channel imbalance. With its advanced features and meticulous design, the TEAC AS-200S offers exceptional audio quality and flexibility for vintage audio enthusiasts. Amplifier is in good workng condition. The front looks pretty good with some usage marks visible. The woodemn sides and top look not that bad too. Only issue is that trough the years the cabinet has lost some is stability. It is definitly not falling apart but there is some wiggle room in the cabnet. Amplifier is fully tested and sounds great 200S series integrated amplifier which was upgraded from AS-200 Specifications:Type Pre-main amplifierCircuit system Differential-type quasi complimentary service SEPPPower Amplifier UnitRated output (0.5% distortion rate, ± 0.5 dB) 60W + 60W (4 ?)50W + 50W (8 ?)Distortion Factor (1 kHz) 0.5% or Less (Rated Output)0.1% or Less (at 30W Output)0.1% or Less (at 100 mW Output)Cross modulation distortion factor 0.5% or Less (4 ? at 40W output)Frequency characteristic 20 Hz to 80 kHz + 0 -1dBPower Band Width 20 Hz to 30 kHzResidual noise 0.5 mV or lessInput impedance 25k ? or moreSensitivity 0.7 V (at rated output)Preamplifier SectionOutput (at cartridge 2 mv) Pre out:1.25VRec out:150mVCenter ch : 1 v (at rated output)Input Sensitivity / Impedance Phono1 : 2mV/50k ?Phono2 : 2mV/80k ?Tuner, Aux1/2, Tape1/2 : 130mV/100k ?Record and Reconnector (Din)Frequency characteristic Tuner, Aux, Tape : 30 Hz to 30 kHz + 0 -2dB* Built-in filter of 30 Hz or less for speaker protection)RIAA deviation ± 0.5 dBDistortion Factor (at 1 v output) 0.1% or Less (1 kHz)0.1% or Less (30 Hz)0.1% or Less (20 kHz)Tone control Bass : ± 15 dB or more (50 Hz)Treble : ± 15 dB or more (10 kHz)Loudness + 5 dB or more (100 Hz)Low-cut filter 100 Hz, -12dB/oct.High-cut filter 9 kHz, -12dB/oct.Signal-to-noise ratio (IHF) Phono1/2 : 70 dB or moreHigh level : 90 dB or higherSemiconductor used NPN transistor : 25 pcsPNP Transistor : 15FET : 2Diode : 13 pcsPwer 100 VAC, 50Hz/60HzPower consumption 22W (No signal)180W (at rated output)External dimensions Width 419x Height 151x Depth 297 mmWeight Approx. 9.5 kgVoltage: 220VCables : Not included Working condition: Fully Working (See pictures for the cosmetic condition of this lot)Missing or damages: Medium Usage Marks -We ship worldwide.We offer combine shipping (EU 30KG max, NON EU 20KG max) for all our listings, ask us for details Please note: ??Whenever an item exceeds the weight noted above. Please ask for a shipping quote before making a purchase. The shipping costs are estimated in our shop because we do not know the shipping address. -Shipping in the EU up to 30 KG (max)-Shipping outside of the EU up to 20 KG (max) Picking up the item is also possible. It can either be picked up in Alkmaar or Soest on appointment Delivery by us is also possible in some cases. Please reach out to us for more information about deliveries

Teac CR-H250 DAB+ Receiver micro Hi-fi system It has a few minor marks, and it is in used condition but works great with amazing sound Quality. It has been fitted with a brand-new laser and a new drawer belt, also the volume control has been stripped and cleaned as these often give trouble on this model. Please check the Pictures for Condition, they are of the actual receiver. Comprises of, integrated amplifier, DAB AM FM RDS tuner, CD Player 2 Aux & 1 Tape Inputs. All that’s required are speakers. DAB Aerial included. No other accessories are included ie AM, FM aerial or remote control but these are easily obtainable. This item has been fully tested and works well. Specifications AMPLIFIER Section Output Power 25 W/ch (6 ohms, 0.5 %,1 kHz) Input Sensitivity 300 mV/47k ohms Frequency Response 20 Hz to 60,000 Hz (+1/-3 dB) TUNER Section FM Section Tuning Range 87.50 MHz to 108.00 MHz (50 kHz steps) Signal-to-Noise Ratio .. 65 dB (Mono) Presets 30 AM Section Tuning Range 522 kHz to 1629 kHz (9 kHz steps) Signal-to-Noise Ratio 35 dB Presets 30 DAB Section Tuning Range Band 3, 174 MHz-240 MHz Input 50 ohms, nominal Max Signal –3 dBm typ Sensitivity –96 dBm typ Adjacent Channel Rejection 35 dB typ Presets 10 Audio Output Stereo, 2.5 Vp-p Digital Output 24 bit/48 kHz resolution CD PLAYER Section Frequency Response 20 Hz to 20,000 Hz (±2 dB) Signal-to-Noise Ratio more than 85 dB Wow and Flutter Unmeasurable GENERAL Power Requirements 230 V AC, 50 Hz Power Consumption 75W(standby) 2 W Dimension (W x H x D) 215 x 110 x 359mm Weight 4.4 k Any other questions......just mail me. Terms and conditions Please Note we DO NOT use Evri for deliveries only Royal mail for smaller parcels, UPS for big ones via Paklink & DHL for 24 Hour delivery. If it doesn’t mention it in the description such as, manual, cable, remote etc. then it won’t be included. Please note the watts on the back of an amplifier is how much electricity the amp consumes and has nothing to do with the power output Parcels can be tracked via Ebay or DHL.com next day. 24-hour parcel’s must be paid before 9 AM otherwise the parcel will be sent the following day, If paid late on a Friday or on Saturday or Sunday it won’t go out until the Monday. There are no 24 hour deliveries to Highlands and Islands and other UK Post Codes, if unsure please email first Payment options Ebay payments or cash on collection Returns and warranties. Return Policy We hope that you will be pleased with your purchases from Robinsons North Walsham. However, there may be occasions when you will need to return items to us. Items Damaged in Transit If any items were damaged in transit, we ask that you report it to us within 3 working days. If the items are visibly damaged on receipt, its best to sign the carriers delivery note accordingly. We will arrange collection (UK mainland only, not all UK mainland post codes sorry, cannot collect from out of area post codes, I’m sure you know If your post code is classed as out of area, the item will need to be returned at buyers cost). Items should be returned in their original packaging complete with all accessories and documentation. Once received back, well issue a full refund to you via your original payment method. Items Faulty on Arrival and Items Faulty in 30-day Warranty Period (this does not include any faults listed in the description or items sold as faulty for spares or repair, these are not returnable) If your items are faulty on arrival, please inform us as soon as possible and let us know what the fault is. We will arrange collection (UK mainland only, not all UK mainland post codes sorry, we cannot collect from out of area post codes, I’m sure you know If your post code is classed as out of area, the item will need to be returned at buyers cost). Items should be returned in their original packaging complete with all accessories and documentation. Once we have verified the fault, well issue a full refund to you via your original payment method. We test returned items, and if a returned item is found not to be faulty we will deduct return postage costs from the refund. We security mark all items and keep a record of serial numbers so if a different item is returned as faulty, we will report it to Ebay and involve the local police as this is classed as fraud and can carry a custodial sentence.

TEAC AS-100 Stereo Integrated Amplifier JAPAN WORK. Condition is Used. Shipped with UPS Ground. Specifications Power output: 40 watts per channel into 8? (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.2% Input sensitivity: 2mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 80dB (line) Output: 150mV (line) Speaker load impedance: 4? to 16? Semiconductors: 26 x transistors, 2 x IC, 2 x thyristors, 9 x diodes The photos accurately depict the appearance and condition of the item. Youll get only what you see. 48 Continental States ONLY. Shipping to AK, HI and Canada will be more and added to PayPal invoice. International bidders ask for shipping before bid. We only ship to the confirmed PayPal address. We dont accept P.O.BOXES - please provide a physical address! Taxes and import charges When you sell on eBay, youre responsible for complying with all applicable tax laws. If youre selling to buyers outside the US, you should inform them about the potential import charges theyll need to pay when they receive their item.