Stand TV sony Screw Not Supplied/Screws not Included 4-558-431The description of this item has been automatically translated. If you have any questions, please feel free to contact us.TV Stand sony SCREWS NOT INCLUDED / SCREWS NOT INCLUDED 4-558-431Original, 6 month warranty Prestalia e-commerce solutions. TV Stand sony SCREWS NOT INCLUDED / SCREWS NOT INCLUDED 4-558-431 Original, 6 month warranty Prestalia e-commerce solutions. Marque , Marque compatible , Type TV Pied, Support fixation Numéro de pièce fabricant PIED-3060s73155 EAN 3701084409099

Panasonic DVD-558 Tested and Works . Condition is Used. Shipped with USPS Priority Mail.

Panasonic DVD-558 Tested and Works *no remote*. Never used

This listing includes (2) TWO flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the two cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Currently, these cables are listed for domestic USA sales/shipment. I have shipped numerous cables out of the US, but at an average cost of $13 extra. If you are outside of the US, and want these cables, please contact me for additional shipping costs. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

This listing includes (3) three flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the three cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. Currently, these cables are listed for domestic USA Sale/shipment only. I have in fact shipped several to Europe and elsewhere, but it cost $13 extra to ship them. If you’re outside the US, and want these cables, please contact me to get a shipment cost. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

Panasonic DVD-558 Tested and Works *no remote*. Never used

This listing includes (3) three flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the three cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. Currently, these cables are listed for domestic USA Sale/shipment only. I have in fact shipped several to Europe and elsewhere, but it cost $13 extra to ship them. If you’re outside the US, and want these cables, please contact me to get a shipment cost. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

This listing includes (2) TWO flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the two cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Currently, these cables are listed for domestic USA sales/shipment. I have shipped numerous cables out of the US, but at an average cost of $13 extra. If you are outside of the US, and want these cables, please contact me for additional shipping costs. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

Panasonic DVD-558 Tested and Works *no remote*. Never used

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

This listing includes (3) three flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the three cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. Currently, these cables are listed for domestic USA Sale/shipment only. I have in fact shipped several to Europe and elsewhere, but it cost $13 extra to ship them. If you’re outside the US, and want these cables, please contact me to get a shipment cost. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

This listing includes (2) TWO flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the two cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Currently, these cables are listed for domestic USA sales/shipment. I have shipped numerous cables out of the US, but at an average cost of $13 extra. If you are outside of the US, and want these cables, please contact me for additional shipping costs. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

Panasonic DVD-558 Tested and Works *no remote*. Never used

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

This listing includes (2) TWO flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the two cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Currently, these cables are listed for domestic USA sales/shipment. I have shipped numerous cables out of the US, but at an average cost of $13 extra. If you are outside of the US, and want these cables, please contact me for additional shipping costs. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

This listing includes (3) three flat ribbon cables that perform the same tasks as SONY Control-S cables, PN: 1-558-233-11. They are used to interconnect various SONY ES audio components so that the functions of the components can be controlled by SONY master wireless controllers. These female-to-female cables are slightly less than 17 inches in length, and the actual connectors fit appropriately and snugly into the male receptacles on the back of various SONY ES components, without the beveled edges and mounting clips of the original SONY cables. This is good so you get a solid electrical connection that is reliable. The one complaint many had with regard to the original cables was that their loose, sloppy fit would eventually fail, especially under humid conditions. In the pix you will see that I have connected inbound and outbound signal path on my SONY 333es EQ component. Only the three cables are included in this listing. Please check your components and measurements, and make sure these 4-pin female-to-female cables are what you need for your particular setup. Currently, these cables are listed for domestic USA Sale/shipment only. I have in fact shipped several to Europe and elsewhere, but it cost $13 extra to ship them. If you’re outside the US, and want these cables, please contact me to get a shipment cost. They have been tested on SONY ES components to ensure proper function. All have the left-most wire marked in red at either end of the cable, so you are mindful of the need to orient the cables correctly when plugging them in. These cables are unobtanium, and are a joy to use in the SONY ES universe of audio products. Shipping, tracking are included. Sale and shipment to lower 48 US ONLY. PAYPAL confirmed address only.

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

NATIONAL PANASONIC RQ-558 2 BAND RADIO CASSETTE RECORDER, ALL WORKING, JAPAN. The radio cassette is in full working order. It is in very good condition for its age, their are no serious defects, only the odd scratch commensurate with it age. Please see attached photos. It comes with its mains lead. Happy to answer any questions you may have.

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

Up for auction is a Used Vintage Parts for Sony TC-651 Bias Oscillator Mounted Circuit Board No. 1-539-558-12 In used condition. Please see the images of the actual item above for a better idea of the condition. Please contact me with any issues prior to leaving negative/neutral Feedback or low detail ratings, as I will always do my best to solve any problems that may come up!

Sony T C558 mit 26 Tapes mit Musik 64 Minuten beidseitig.

NATIONAL PANASONIC RQ-558 2 BAND RADIO CASSETTE RECORDER, ALL WORKING, JAPAN. The radio cassette is in full working order. It is in very good condition for its age, their are no serious defects, only the odd scratch commensurate with it age. Please see attached photos. It comes with its mains lead. Happy to answer any questions you may have.