Original SME (3009) Series III anti Skating Weight Fadengewicht Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original anti skating weight thread weight for SME (3009) tonearm Series IIISME anti-skating weight Original anti skating weight thread weight for SME (3009) tonearm Series III SME anti-skating weight   Marke SME Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität SME Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

Operating Instructions For SME Series III Tonearm Manual The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Operating instructions, assembly instructions, adjustment instructionsfor SME Series III tonearmgood general condition with signs of wearOperating instructions, assembly instructions, adjustment instructions for SME Series III tonearm good general condition with signs of wear

Original SME Series III S Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original SME Series III S tonearmoptically very good condition(the tonearm stand is not part of the offer)Original SME Series III S tonearm optically very good condition (the tonearm stand is not part of the offer) Herstellernummer nicht zutreffend Marke SME Markenkompatibilität Universell Produktart Tonarm EAN Nicht zutreffend

This is a used unit selling for parts only, came out of an estate sale. Didn’t have the power cable/power inverter to go with it. Has a smoked cover that is attached to it. Also has a SME Series IV Magnesium Tonearm with a Linn Klyde cart. With no power cord to test this will be sold as parts only sale. Does have some paint specks on top but will try to clean it up before the auction ends. Please message with any questions that I might be able to help with. Thank you for looking and if bidding then hope you get it.

DescriptionGrade : Used Operation confirmed. There are some scratches. All my products are 100% Authentic. ?Type: Static balance, fluid-dumped type?Effective length: 229 mm?Arm height adjustment: 60.3 to 82.6 mm?Stylus pressure range: 0 to 2.5 g?Compatible cartridge weight: Maximum 13 g?Note: As the headshell is integrated, cartridge replacement is achieved by replacing the carrying arm CA1. Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

For Tonearm Adjustment Setting Azimuth Headshell Tonearm SME Series III Original The description of this item has been automatically translated. If you have any questions, please feel free to contact us. for tonearm adjustment setting azimut headshell tonearm SME Series IIIOriginalfor tonearm adjustment setting azimut headshell tonearm SME Series III Original

SME 3009 Series III Black Pipe Static Balance Type Tonearm Pickup Arm Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview Highly sensitive tone arm compatible with ultra-lightweight, high-compliance cartridges. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, with only the surface of the pipe hardened by nitrogen hardening treatment, and the interior lined with a fibrous lining to naturally dampen the micro-vibrations transmitted from the cartridge.This carrying arm pipe is a CA-1/BLACK pipe specification, which is rarely distributed.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. A unique fluid damper is provided to reduce low-frequency resonance and mechanical vibration of the entire pickup system when a cartridge is mounted.This damper uses the oil dump method, which utilizes the flow characteristics of silicon fluid to reduce low-frequency resonance, which is a slight resonance but has a significant effect on the low-frequency range. Accessories Internal weight (large lead plate x 1 / small lead plate x 4 / spacer x 1)?(usable cartridge weight: approx. 7.0g to 12.0g)Inside force canceller weightSME cableOil dump partsDamping oilInstruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Weight And Abstandsplättchen for Tracking Arm Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Weight and spacer (1.5mm) for tonearm SME Series III Weight and spacer (1.5mm) for tonearm SME Series III

Original SME (3009) Series III anti Skating Weight Fadengewicht Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original anti skating weight thread weight for SME (3009) tonearm Series IIISME anti-skating weight Original anti skating weight thread weight for SME (3009) tonearm Series III SME anti-skating weight   Marke SME Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität SME Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

Restored Thorens TD 160 Turntable Sme 3009 Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUNDThorens TD160 with SME Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.Cover plate:New cover plate made of 1mm brushed stainless steelOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160

Original SME Series III S Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original SME Series III S tonearmoptically very good condition(the tonearm stand is not part of the offer)Original SME Series III S tonearm optically very good condition (the tonearm stand is not part of the offer) Herstellernummer nicht zutreffend Marke SME Markenkompatibilität Universell Produktart Tonarm EAN Nicht zutreffend

SME 3009 series111 tone arm for parts missing weight guide reel and one knob as seen in pics

SME 3009 series III Tonearm With Shure V15 IV (No Stylus)Complete with Original RCA Cable Assembly Very Good Condition - Made In England Attention: We Ship UPS and USPS, depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 50 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Check the rates for your city and country. We ship to USA states directly. If you live in another country please read below for shipping details. ------------------------------------------------------------- International Shipping is available through Ebay. If you live outside of the USA, Ebay can estimate the extra charge To your postal code. We can not determine that for you!!!. We will ship to the Ebay Hub in Illinois and then they repack and handle customs forms and charge for their service on top of our price to ship to your country.

For Tonarmjustierung Setting Azimut Headshell Arm Sme Series III OriginalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.for tonearm adjustment adjustment azimuth headshell tonearm SME Series IIIOriginalfor tonearm adjustment adjustment azimuth headshell tonearm SME Series III Original

Weight And Abstandsplättchen for Tracking Arm Sme Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Weight and spacer (1.5mm) for tonearm SME Series III Weight and spacer (1.5mm) for tonearm SME Series III

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Black Pipe Static Balance Type Tonearm Pickup Arm Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview Highly sensitive tone arm compatible with ultra-lightweight, high-compliance cartridges. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, with only the surface of the pipe hardened by nitrogen hardening treatment, and the interior lined with a fibrous lining to naturally dampen the micro-vibrations transmitted from the cartridge.This carrying arm pipe is a CA-1/BLACK pipe specification, which is rarely distributed.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. A unique fluid damper is provided to reduce low-frequency resonance and mechanical vibration of the entire pickup system when a cartridge is mounted.This damper uses the oil dump method, which utilizes the flow characteristics of silicon fluid to reduce low-frequency resonance, which is a slight resonance but has a significant effect on the low-frequency range. Accessories Internal weight (large lead plate x 1 / small lead plate x 4 / spacer x 1)?(usable cartridge weight: approx. 7.0g to 12.0g)Inside force canceller weightSME cableOil dump partsDamping oilInstruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series IIIS Static Balance Type Tonearm Pickup Arm Vintage Audio w/Box Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Needle pressure adjustment weight/auxiliary weight (pre-installed)Internal lead weights x 5?(usable cartridge weight: from 0.2g to 13.7g)Inside force canceller weight/pulleyFixing wood screws x 4SME cable / ground wireOil dump parts / Damping oilInstruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (original)Original box Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Restored Thorens Td 160 Mkii Turntable & Sme Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUND 160 MKII with SME Series III tonearmOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD160 MKII

Restored Thorens TD 160 Turntable Sme 3009 Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/230/ 50Hz or 110V/120/60Hz (for example USA)DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!DANGER! The following change applies! The turntable plate is no longer delivered in polished but in matt black!You can find even more interesting offers from us. Take a look at... Art and Sound GermanyRESTORED by ART-AND-SOUNDThorens TD160 with SME Series IIIItem description:Limit switch:    NoInner plate:             metalSpindle:                   10mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmHousing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is elaborate with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. The bottom of the case is equipped with three openings for horizontal alignment of the turntable.Cover plate:New cover plate made of 1mm brushed stainless steelOrtofon Vinyl Master Alpha pickup:The Ortofon Alpha is a full-fledged pickup. It impresses with its temperament and neutral basic character. The VinylMaster Alpha features an elliptical stylus that allows for balanced and distortion-free playback.Audio cable:Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is painted matt black. It gives your record player a lasting and discreet elegance.Turntable feet:Four height-adjustable spikes made of chrome-plated stainless steel. New drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure): 180 Cartridge MM system including installation:Ortofon VinylMaster Red (elliptical): 190 Ortofon VinylMaster Silver (Fritz Gyger, naked): 390Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250: 890 Cartridge MC System including installation: AUDIO-TECHNICA AT-OC9XML (microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO-TECHNICA AT-OC9XSL (Special Line Contact): 799Branded cable from Oelbach. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160

Original SME Series III S Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original SME Series III S tonearmoptically very good condition(the tonearm stand is not part of the offer)Original SME Series III S tonearm optically very good condition (the tonearm stand is not part of the offer) Herstellernummer nicht zutreffend Marke SME Markenkompatibilität Universell Produktart Tonarm EAN Nicht zutreffend

Sme Series III Tracking Arm Weights Additional Weights Tonearm Weight No. 3203The description of this item has been automatically translated. If you have any questions, please feel free to contact us.SME Series IIIAdditional weights for the tonearmContents see photoSME Series III Additional weights for the tonearm Contents see photo

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.