AKG P25MD Pick-up Plattenspieler System Nadel retipped, Sony SME-Headshell. Habe die Qualität soeben an einem originalen Linn Sondek LP12, Tonarm SME 3009 Serie II, Auflage 1,75 Gramm mit der dhfi Schallplatte 2 getestet. Abtastung horizontal 50 bis 60?, vertikal 50?.

SME 3009 Series II S2 Static Balanced Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, tarnish, dirt, etc. due to normal use. For other appearances, please refer to the photo.*IFC weights are missing. Please prepare separately. Specifications Type: Static balance typeEffective length 229.0mm Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3010-R the Best pick-up Arm W/ Original Box In Excellent Condition Item Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This tone arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

SME 3009-R BLACK Static Balance Type Pickup Arm Tone Arm Rare Vintage Audio #8 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. The SME-R Black Series is a very rare arm with only a few in distribution. Specification Effective length: 231.8 mmStylus pressure range: 0-5g 0.5g step or 0-2.5g 0.25g stepArm height adjustment: 27.0-41.3 mm (mounting surface-turntable top surface)Cartridge weight 9.5-22g (without front weight) 21-34g (with front weight) Accessories Main weight / Needle pressure weightInside force canceller weight/pulleyHead shell (SME)Lead wires x 4RCA cable (SME)Base fixing screws x 4Instruction Manual (copy)(Japanese)Mounting plate (copy)Alignment Protractor (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Black Pipe Static Balance Type Tonearm Pickup Arm Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview Highly sensitive tone arm compatible with ultra-lightweight, high-compliance cartridges. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, with only the surface of the pipe hardened by nitrogen hardening treatment, and the interior lined with a fibrous lining to naturally dampen the micro-vibrations transmitted from the cartridge.This carrying arm pipe is a CA-1/BLACK pipe specification, which is rarely distributed.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. A unique fluid damper is provided to reduce low-frequency resonance and mechanical vibration of the entire pickup system when a cartridge is mounted.This damper uses the oil dump method, which utilizes the flow characteristics of silicon fluid to reduce low-frequency resonance, which is a slight resonance but has a significant effect on the low-frequency range. Accessories Internal weight (large lead plate x 1 / small lead plate x 4 / spacer x 1)?(usable cartridge weight: approx. 7.0g to 12.0g)Inside force canceller weightSME cableOil dump partsDamping oilInstruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009-R BLACK Static Balance Type Pickup Arm Tone Arm Rare Vintage Audio #6 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. The SME-R Black Series is a very rare arm with only a few in distribution. Specification Effective length: 231.8 mmStylus pressure range: 0-5g 0.5g step or 0-2.5g 0.25g stepArm height adjustment: 27.0-41.3 mm (mounting surface-turntable top surface)Cartridge weight 9.5-22g (without front weight) 21-34g (with front weight) Accessories Main weight / Needle pressure weightSub weightsInside force canceller weight / PulleyHead shell (SME) / Lead wires x 4RCA cable (SME)Base fixing screws x 4Instruction Manual (copy) (Japanese)Mounting plate (copy)Alignment Protractor (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3012 Series II Static Balance Type 12 Long Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Specification Overall length 400mmEffective length 305mmOverhang 13mmCartridge weight 12g?26gNeedle pressure range 0 to 5g in 0.5g steps or 0 to 2.5g in 0.25g steps Accessories Main weight / Needle pressure adjustment weightSub-needle pressure weightInside force canceller weight/pulleySME cableWood screws x 4Instruction Manual (English copy)Alignment Protractor/Mounting Plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Der SME CA-1 Titanium Nitride Trage-Pick-up-Arm für die 3009 Series III I ist ein hochwertiges Ersatzteil für Plattenspieler. Mit seiner präzisen Konstruktion und dem robusten Material bietet dieser Tonarm eine erstklassige Wiedergabequalität und Langlebigkeit. Ideal für Liebhaber von hochwertigem Hi-Fi-Audioequipment, um ihr System auf das nächste Level zu bringen. Guter gebraucht zustand Lieferung so wie Bilder zu sehen

SME 3009-R BLACK Static Balance Type Pickup Arm Tone Arm Rare Vintage Audio #6 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. The SME-R Black Series is a very rare arm with only a few in distribution. Specification Effective length: 231.8 mmStylus pressure range: 0-5g 0.5g step or 0-2.5g 0.25g stepArm height adjustment: 27.0-41.3 mm (mounting surface-turntable top surface)Cartridge weight 9.5-22g (without front weight) 21-34g (with front weight) Accessories Main weight / Needle pressure weightSub weightsInside force canceller weight / PulleyHead shell (SME) / Lead wires x 4RCA cable (SME)Base fixing screws x 4Instruction Manual (copy) (Japanese)Mounting plate (copy)Alignment Protractor (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Black Pipe Static Balance Type Tonearm Pickup Arm Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview Highly sensitive tone arm compatible with ultra-lightweight, high-compliance cartridges. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, with only the surface of the pipe hardened by nitrogen hardening treatment, and the interior lined with a fibrous lining to naturally dampen the micro-vibrations transmitted from the cartridge.This carrying arm pipe is a CA-1/BLACK pipe specification, which is rarely distributed.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. A unique fluid damper is provided to reduce low-frequency resonance and mechanical vibration of the entire pickup system when a cartridge is mounted.This damper uses the oil dump method, which utilizes the flow characteristics of silicon fluid to reduce low-frequency resonance, which is a slight resonance but has a significant effect on the low-frequency range. Accessories Internal weight (large lead plate x 1 / small lead plate x 4 / spacer x 1)?(usable cartridge weight: approx. 7.0g to 12.0g)Inside force canceller weightSME cableOil dump partsDamping oilInstruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3010-R Static Balance Type Tonearm Pickup Arm Full Set Vintage Audio w/ Box Unused Domo Arigato! Welcome, Thank you for your visit. Description Although it is an unused item, it has been opened for taking some pictures. The original box has slight damage due to aging / storage.There are slight scratches and dullness on the storage and viewing.The original box has damage due to long-term storage. Accessories ?Main weight?Sub weight?Stylus pressure weight?Inside force canceller/pulley?Headshell (SME)?Lead wire x 4?RCA cable (SME)?Base fixing screw x 4/washer x 4?Box spanner·Hex wrench?Cartridge mounting screw?Instruction manual (original Japanese)?Mounting plate (original)?Alignment protractor (original)?Original box All accessories are available. Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series IIIS Static Balance Type Tonearm Pickup Arm Vintage Audio w/Box Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Needle pressure adjustment weight/auxiliary weight (pre-installed)Internal lead weights x 5?(usable cartridge weight: from 0.2g to 13.7g)Inside force canceller weight/pulleyFixing wood screws x 4SME cable / ground wireOil dump parts / Damping oilInstruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (original)Original box Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009-R BLACK Static Balance Type Pickup Arm Tone Arm Rare Vintage Audio #8 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. The SME-R Black Series is a very rare arm with only a few in distribution. Specification Effective length: 231.8 mmStylus pressure range: 0-5g 0.5g step or 0-2.5g 0.25g stepArm height adjustment: 27.0-41.3 mm (mounting surface-turntable top surface)Cartridge weight 9.5-22g (without front weight) 21-34g (with front weight) Accessories Main weight / Needle pressure weightInside force canceller weight/pulleyHead shell (SME)Lead wires x 4RCA cable (SME)Base fixing screws x 4Instruction Manual (copy)(Japanese)Mounting plate (copy)Alignment Protractor (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3012 Series II Static Balance Type 12 Long Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Specification Overall length 400mmEffective length 305mmOverhang 13mmCartridge weight 12g?26gNeedle pressure range 0 to 5g in 0.5g steps or 0 to 2.5g in 0.25g steps Accessories Main weight / Needle pressure adjustment weightSub-needle pressure weightInside force canceller weight/pulleySME cableWood screws x 4Instruction Manual (English copy)Alignment Protractor/Mounting Plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Vintage Original SME Model 3009 Series II Improved Tone/Pick-Up Arm Box. As-is condition. Appears to be in nice cosmetic condition. Some discoloration. Mounting Template and Alignment Protractor included See photos.On Oct-14-24 at 13:34:09 PDT, seller added the following information: This auction is for the BOX and other packaging ONLY. Only whats pictured. No tonearm is included in this auction.

SME 3012 Series II Static Balance Type 12 Long Tonearm Pickup Arm 1970s #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Specification Overall length 400mmEffective length 305mmOverhang 13mmCartridge weight 14g?27gNeedle pressure range 0 to 5g in 0.5g steps or 0 to 2.5g in 0.25g steps Accessories Split main weight/needle pressure adjustment weightSub-needle pressure adjustment weightInside force canceller/pulleySME cableHead shell (SME)Lead wires x 4Instruction Manual (English copy)Wood Screws x 4Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009 Series III Static Balance Type Tonearm Pickup Arm Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. Damping oil is drained to prevent oil leakage during transportation. Please replenish the included damping oil at the time of use. *Turntables and other equipment shown in the photo, other than the 3009, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length: 229.0mmCenter of Slide Base to Center of Turntable :215.9mmSlide base travel range: ±12.7mm Overview While the SIIIs needle pressure adjustment and inside force canceller are rotary systems that can be fine-tuned, the SIIIS uses a simple slide system. SMEs unique carrying arm system, which integrates the shell and pipe arm into a single unit, is used to dampen harmful vibrations. The pipe arm is made of ultra-thin titanium, and only the surface of the pipe is hardened by nitrogen hardening treatment, while the interior is lined with a fibrous lining to naturally dampen micro-vibrations transmitted from the cartridge.In addition, carbon fiber processed by a 100-ton press is used for the main weights and other parts that require weight, to further increase sensitivity and reduce the moment of inertia. The shell section is made of carbon fiber. Carbon fiber is used for the knife-edge part, a typical SME technology.Furthermore, by placing the knife edge at a right angle to the direction of the headshell, the tip of the edge is aligned at the same height as the stylus of a standard cartridge, and the main weight is placed below the height of the pipe arm. This new fulcrum arrangement successfully reduces the frictional resistance of the knife edge to near zero.This structure also works effectively against the arm lifting phenomenon. Accessories Internal weight (large lead plate x 1 / small lead plate x 5)?(usable cartridge weight: from approx. 8.0g to 13.0g)Inside force canceller weightSME cableWood screws for fixing arm x 4Oil dump partsDamping oilInstruction Manual (Original Japanese *Damaged due to age.)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3012 Series II Static Balance Type 12 Long Tonearm Pickup Arm 1970s #4 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Specification Overall length 400mmEffective length 305mmOverhang 13mmCartridge weight 14g?27gNeedle pressure range 0 to 5g in 0.5g steps or 0 to 2.5g in 0.25g steps Accessories Split main weight/needle pressure adjustment weightSub-needle pressure adjustment weightInside force canceller/pulleySME cableHead shell (SME)Lead wires x 4Instruction Manual (English copy)Wood Screws x 4Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3012-R Static Balance Type 12 Long Tonearm Pickup Arm Vintage Analog Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels Lifter descent speed (oil replenished) Each adjustment point, operation feeling Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. *Turntables and other equipment shown in the photo, other than the SME 3012-R, are for presentation purposes only and are not included in the product. Specifications Type: Static balance typeEffective length 307.3mm294.1mm from center of slide base to center of turntableSlide base adjustment range ±12.7mmCartridge usable range: approx. 8g to 20.5g (including headshell) Accessories Main weight / Needle pressure adjustment weightInside force cancelling weight/pulleyRCA cable (SME)Base fixing screws x 4Instruction Manual (copy)(Japanese)Alignment Protractor (copy)Mounting plate (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME 3009-R Static Balance Type Tonearm Pickup Arm Vintage Audio 1980 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished / cleaned for each part.The appearance is a beautiful product without any noticeable scratches. Specification Type Static balancedEffective length 231.8mmNeedle pressure range 0 to 5g in 0.5g steps or 0 to 2.5g in 0.25g stepsArm height adjustment 27.0-41.3mm (from mounting surface to turntable top)Cartridge weight 9.5 to 22g Accessories Main weight / Needle pressure weightSub weightsInside force canceller weight/pulleyRCA cable (SME)Base fixing screws x 4Instruction manual (copy in Japanese)Mounting plate (copy)Alignment Protractor (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SME CA-1 Titanium Nitride Carrying Pick-up arm for 3009 Series III In Excellent Item Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This tone arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.