????PRODUCTS???? MICRO SX-111FV Brass Vacuum Turntable with RP-1110 Air Pump Unit The SX-111FV, released in 1983, features a brass vacuum platter designed to flatten slightly warped records seamlessly using the included air pump unit. The FV stands for Float and Vacuum. The system incorporates an air-bearing mechanism that lifts the turntable using air, ensuring smooth and precise playback.Condition All parts have been polished and cleaned. Dust Cover / Buttons & Panel / Brass Platter / Arm BaseDust Cover: Minor scuffs and light scratches remain, but there are no major damages. The cover has been polished with a specialized compound to enhance clarity and gloss.Buttons & Panel: Retain their luster with no lettering loss.Arm Base: Light scratches only; overall in good condition.Glass Frame Interior: No cracks or chips.Brass Platter: Polished to a shine, though minor metal tarnish remains. The vacuum rubber shows no signs of deterioration or tearing and remains soft. CabinetSome touch-ups for tarnish and light scratches, but no major damages are visible. The overall finish retains its gloss.All four insulators are functional. Hinges are intact and hold the cover in an open position. Air PumpSlight lifting of the surface sheet on both sides of the button panel.Minor scuffs and scratches are present, but the unit retains its gloss and remains functional. This turntable is a finely preserved piece, with careful restoration to bring out its original beauty and functionality. ? Operation To ensure functionality, we have performed aging tests for half a day to a full day. For this listing, our company has conducted comprehensive maintenance and operation checks, including:Testing electronic componentsLubricating the spindle oilCleaning all contact pointsAdjusting various parts The unit is in a condition where you can use it with confidence.Turntable – Fully OperationalThe 33/45 RPM speed switch and speed adjustment function perfectly, with stable rotation confirmed using the included stroboscope.The Start/Stop buttons are responsive with no issues.All lights are functional and illuminate properly.Air Pump – Fully OperationalWhen the tube is connected and the SUCTION button is pressed, the record is securely vacuumed to the platter.Lights illuminate with no problems. Note: This unit supports both 50/60Hz frequencies. The pump unit will be shipped with transport screws attached. Before use, please remove the two red screws located on the bottom of the unit. AccessoriesDust coverBeltArm base (A-1206 for SME short arm)Pump unit (RP-1110)Dedicated tube (pre-connected to RP-1110)Power cordTwo platter removal handlesGround wireStroboscope (MICRO)User manual (copy)Original box for the main unit (with internal cushioning materials)Transport screws for the pump unit The pump unit will be shipped with transport screws attached. Before use, please remove the two red screws on the bottom of the unit. ????PAYMENTS???? We accept PayPal and all major Debit / Credit Cards. We can only ship your item after your payment clears. We ship within 10 days of payment.????CHECKOUT???? Please check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed.????SHIPPING???? Packages:Box and Bubblerup Packages usually leave our warehouse within 10 days of payment. Weekend orders will ship on Monday or Tuesday. We provide valid Tracking Numbers for all orders.????International Packages:???? We ship to all US Territories, Europe and Asia and Middle East and Australia and Canada including Guam and Hawaii. All our international packages ship under the Fedex and Japan Post.????CUSTOMER SERVICE???? If you have any questions or issues, we are at your service. You can email us anytime through eBay messages.????RETURN INFORMATION???? We offer a standard FREE 30 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund.????Customs duty???? Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. We will reply to your question or invoice within 3 days. We cant not reply gifts or unreasonable requests such as declared amount.

All packages are shipped directly from japan!! Condition DescriptionThis is a used item. There is a feeling of use. Please have a look at the photos. ? Functional : The operation works well. And the operation of each button is also comfortable. ? Include : Please confirm the accessories with photos. All the accessories appearing in the photos are attached. *If you want to know more details of condition, please feel free to contact me. Please Note shipping from Japan. Policy Payment [ International Buyers - Please Note ] - Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. - Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. - These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Please do not confuse them for additional shipping charges. We only accept PayPal payments. Please pay within 3 days after your purchase.Cancellations & Returns Cancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.shipping ?????shipping????? [ Shipping Address ] We ship to only address where be registered by Paypal. [ Other Carrier ] We can arrange shipment by DHL or FedEx or Japan Post. Please ask us about Handling Time and Price. [ Combine shipping & Large Quantity ] Please contact us for combine shipping & large quantity deals before payment. We do our best for you!!!!! [ Order Processing & Handling Time ] Your order will be shipped within 5~10 business days (excluding Saturday, Sunday & Japans Holiday) after the payment is confirmed. [ Compensation & Insurance] When you choose EMS, in order to receive compensation, it is necessary to open the box and check your item with delivery staff at the time of delivery. If you dont do that, you may not receive compensation and new item from us even if your item is damaged and lacked. [ Li-ion Battery ] Some countries( Germany,France,Italy,Mongolia,SriLanka,Turkey,Nigeria and more.) does not accept lithium battery via EMS, SAL by Post Office. Please check your countrys rule yourself. If we receive order from buyer who located in these countries, we will ask buyer to choose 1 from 3. 1. Ship without Ri-ion Battery removed from item. 2. Change shipping method to Fedex or DHL with additional shipping cost. 3. Cancel

MICRO SX-111FV TURNTABLE GUNMETAL SUCTION PUMP UNIT RP-1110 SME BASE A1206 Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? MICRO SX-111FV Brass Vacuum Turntable with Pump Unit RP-1110 Included The MICRO SX-111FV, released in 1983, features a brass and vacuum-based platter. The FV stands for Float and Vacuum. This model incorporates a vacuum system with the included air pump unit, which allows the turntable to integrate with records, accommodating minor warps. It uses an air bearing system that levitates the turntable using air pressure. Condition: Each component has been polished and cleaned. The dust cover has been polished with a specialized compound and finished with a shine to enhance its transparency. The platter and metal parts have been polished to remove dirt and rust as much as possible. Dust Cover/Buttons & Panel/Bronze Platter/Arm Base The cover shows some minor scratches and scuffs but no major damage, retaining its transparency and overall good condition. The buttons and panel are glossy, with no noticeable fading of the lettering. The bronze platter has only minor scuffs and dullness, with no prominent scratches and retains its shine. The vacuum rubber part shows no signs of deterioration or tearing and remains soft. The glass surface inside the frame is free from cracks or chips. The arm base is in good condition with no visible scratches. Cabinet There is a slight dullness near the lower corners. Overall, there are no major scratches, and it retains its shine. All four isolators are functioning properly. The hinges are intact and hold the cabinet in the open position without damage. Air Pump There is slight peeling (lifting) on the surface sheets on both sides of the button panel. Aside from some scuffs and minor scratches, it retains its shine, and there are no noticeable damages. Overall Condition The item is in good overall condition. Considering its age, it is judged to be in good condition by our standards. As it is a used item with years of use, please be aware of minor scratches, scuffs, and signs of use before placing a bid. Our staff assesses the condition based on certain standards used for vintage audio equipment. Personal perceptions of condition may vary, so please review the images carefully and make your own judgment. Feel free to contact us with any questions regarding the condition. Functionality We perform aging tests for half a day to a full day to ensure proper functionality. The item has been thoroughly serviced and tested by us, including measuring electronic parts, lubricating spindle oil, cleaning contact points, and adjusting various components. It is in a condition ready for reliable use. Turntable: Excellent condition Switching between 33 and 45 RPM, and speed adjustments work correctly, with stable rotation confirmed by the included stroboscope. The start/stop button response is normal. All lights are functioning. Air Pump: Excellent condition When the tube is connected and the SUCTION button is pressed, it effectively adheres the record. The light indicator is also functioning correctly. Note: This item is compatible with both 50Hz and 60Hz. In case of any initial functional issues, we offer free repair or return and refund within one week of receipt. If there is a functional defect, we will cover the return shipping cost. For returns other than initial functional defects, the buyer will be responsible for return shipping. We will inspect the returned item and process a refund after confirming its condition. Item Details Manufacturer: MICRO Turntable Model: SX-111FV Pump Unit Model: RP-1110 Dimensions: 200mm W × 217mm H × 360mm D Weight: 6.3kg Included Items Dust cover Belt Arm base (A-1206 for SME short arm) Pump unit (RP-1110) Dedicated tube (pre-attached to RP-1110) Power cord Platter removal handles ×2 Ground wire Belt tensioning fixture EP adapter Hex wrench Stroboscope (MICRO) Instruction manual (original) Transport screws for pump unit (to be attached during shipping; please remove before use) Please note that the items shown in the photos other than our companys equipment are all that is included. Please confirm. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

????Including & Condition Details: As shown in photos. ????Shipping: FedEx MICRO AX-2G Arm Base Compatible with SME Short Arms ?Condition No noticeable damage and glossy. ?Product Contents Manufacturer: MICRO Model: AX-2G Arm Mounting Hole Diameter: Approximately 28mm in height x 69mm in width ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Description & Condition SME 3010-R tonearm, SME cable included A new lateral balance mechanism is used that improves accuracy by moving the main weight shaft in parallel. This mechanism is designed to move the axis of the main weight sideways, and since the moving part is very close to the fulcrum of the arm,it does not put extra strain on the fulcrum and prevents an increase in inertia. It also contributes to the design concept of a wide range of compatible cartridge weights. ?Condition Each part has been polished/cleaned. The arm is beautiful with no noticeable scratches and has a glossy/shiny finish. The weight/cable and other accessories are also in good condition. Overall, it is in beautiful condition. Considering the age of the item, we consider it to be in good condition. This is a used item that has been around for a long time.Please understand that there may be minor scratches/wear/usage due to age/use before bidding. The criteria for judging the condition check column are selected by our staff based on certain standards of our company that handles vintage audio.Since the perception of condition varies from person to person, there may be differences from your standards.Please check the images carefully and make your decision.We are also happy to answer any questions you may have about the condition, so please feel free to contact us. ? OperationWe have confirmed the operation of our equipment.? Output from both channels? Lifter descent speed (oil refilled)? Each adjustment point, operation feel? Height adjustment, etc.There are no problems with operation. We thoroughly check the products, but in the unlikely event that an initial malfunction occurs,we will repair it free of charge or refund you within one week of arrival, so please rest assured.In the event of a malfunction, please return the product at our own expense.Please note that the shipping fee will be borne by the winning bidder for returns other than initial malfunctions.After receiving the returned product, we will check the condition and refund the money. ?Product ContentsManufacturer: SMEModel Number: 3010-R ?Accessories?Main weight/Needle pressure adjustment weight?Inside force canceller weight/pulley?RCA cable (SME)?Base fixing wood screws x 4?Instruction manual (copy)?Mounting plate (copy)?Alignment protractor (copy) *All items in the photo are included except for our companys equipment in the background. Please check. Shipping We ship using FedEx, DHL and Japan Post. Payment We usually ship within 10 business days of receiving cleared payment. . International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Brand: Micro SeikiModel: DQX-1000Colour: Silver/blackOperation: Tested and fully operational - power onn/off switch is missing cover (see images)Condition: Preowned very good condition with minor blemishes as photographedPackaging: We use bespoke packaging, safe worldwide shipping is guaranteedShipping: Free UK post. International via DHL, Fedex or UPS

Denon DP-80 Turntable DK-300 Cabinet SME 3010-R Tonearm JPKey FeaturesItem Name: Turntable DP-80 Brand: Country: Model: DP-80 Features: Color: Pitch Range: Connectivity: Type: Turntable Speed Settings: Audio Outputs: Band: Product Line: MPN: Screen Size: Unit Quantity: Unit Type: Generation: Plug Regional Fitment: Country/Region of Manufacture: Audio Inputs: Number of Inputs: Number of Outputs: Compatible Product: Accessories: Cabinet DK-300, Tonearm SME 3010-R (with sub-weight)SpecificationsBrandDenon+SmeCountryJapanModelSME DP-80/DK-300/3010RFeaturesDirect DriveColorBlack, SilverPitch RangeConnectivityCableTypeMotorSpeed SettingsAudio OutputsRCABandAM/FMProduct LineMPNSME DP-80/DK-300/3010RScreen SizeUnit Quantity1Unit TypeUnitGeneration1st GenerationPlug Regional FitmentType ACountry/Region of ManufactureAudio InputsRCANumber of Inputs2Number of Outputs2Compatible ProductProduct Description?Welcome to Lamitie Store?Description[Accessories]Items not shown in the product description or photos are not included.If the item is new, the originally included items will be included.We specialize in Musical Instrument & Audio equipment items. Visit our store for all your music equipment needs!!! https://www.ebay.com/str/lamitiestoreShipping Shipping from Japan (FedEx or DHL or Japan Post). Usually, we will ship in about 2 - 5 business days. Depending on your country of residence and etc., it will usually arrive 2 - 5 days after shipping. In most cases, shipping is free, but there may be an additional charge depending on your location.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If there is a remote charge for your address, we will charge you for additional shipping. Thank you so much for your understanding.

SME 3010-R Tonearm. At first glance you might think its a 3009 but its the rarer 3010-R. Good condition.

DescriptionGrade : Used The rotation control window does not light up when power is energized. Operation has been confirmed with a supply voltage of 100V. There are some scratches. All my products are 100% Authentic. ************************************************************************* If you purchase an electrical appliance intended for use in Japan, you may need a step-down transformer (converter) to use it because the Japanese voltage standard is 100V. Check the voltage display on the back of the product or on the adapter if one is included. In this case, the adapter display takes priority. First, check the voltage environment you will be using. 1. If the adapter and product display are both 100V or 100V-, use a transformer to make it 100V and use this unit. You need to use a power adapter. 2. For appliances with built-in motors (such as turntables), use an adapter or a transformer with a wattage 2-3 times higher than the products wattage (adapter takes priority). 3. For appliances that generate heat (such as vacuum tube amplifiers), use an adapter or a transformer with a wattage 1.25 times higher than the products wattage (adapter takes priority). Watts/Volt-Amps (W/VA) = Volts x Amps Furthermore, the shape of the power plug varies from country to country. Please prepare the power plug along with the transformer. *We are not responsible for any damage caused by not using a transformer.Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

Description Pre-ownedONKYO Manual Record Player CP-1050(D) Manufacturer NameOnkyo Manufacturers Model No.CP-1050D Brand NameOnkyo Product DescriptionONKYO Manual Record Player CP-1050(D) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Mein Vater hat dutzende Plattenspieler gesammelt und auch selber restauriert , revidiert und umgebaut. Verkaufe aus dieser Sammlung hier einen genialen Luxman px101 Tangentiale Tonarmfhrung mit SME-Anschluss und Halbautomatisch Der Tisch kann fr Euro 300,- separat gekauft werden ( nur bei Selbstabholung ). Tisch und Player haben nur leichte Lagerspuren . Ein Traum in schwarz und superschn , mit tollem Klang . Luxman Originalteile : Netzteil Teller Lager Achse Motor 1 x Tangentialtonarm mit SME-Anschluss Neues Gehuse in Aluminium u. Plexiglas , hochglanz schwarz . Alles ist wertig , schwer und solide , in bewehrter und revidierter Technik , mit tollem Klang und Haptik . Der Player wird ohne Kabel und System aber mit roter Filzmatte und einem hochwertigen Reinigungsbesen geliefert. Bei Vorfhrung und Abholung , auf Grund des kritischen Versandes : Preisreduzierung auf : 1150,- ohne Tisch 1450,- mit Tisch Bitte anrufen unter : 0172 2985504 Als Privatverkufer gebe ich keine Garantie oder Rcknahme . Ich schliee auch jegliche Sachmangelhaftung ausdrcklich aus.

MICRO A-1206 ARM BASE FOR SME 3009 S2 / 3009 S3 / 3010-R ETC TURNTABLE PARTS Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? MICRO A-1206 Arm Base for SME 3009 S2 / 3009 S3 / 3010-R etc. Audio StationMICRO A-1206 ARM BASE FOR SME 3009 S2/3009 S3/3010-R ETC ? CONDITION THERE ARE SOME MINOR SCRATCHES AND WEAR, BUT THE ITEM STILL HAS A SHINY FINISH. PLEASE NOTE THAT THIS IS A USED ITEM THAT HAS AGED OVER TIME. PLEASE BID WITH THE UNDERSTANDING THAT THERE MAY BE MINOR SCRATCHES, WEAR, AND SIGNS OF USE DUE TO AGE AND USAGE. THE CONDITION CHECKLIST WAS CREATED BASED ON THE CRITERIA OF OUR STAFF, WHO SPECIALIZE IN VINTAGE AUDIO EQUIPMENT. HOWEVER, PLEASE BE AWARE THAT THERE MAY BE DIFFERENCES IN PERCEPTION BETWEEN OUR STANDARDS AND YOURS. WE STRONGLY RECOMMEND THAT YOU CAREFULLY REVIEW THE IMAGES PROVIDED AND MAKE YOUR JUDGMENT ACCORDINGLY. IF YOU HAVE ANY QUESTIONS ABOUT THE CONDITION, PLEASE FEEL FREE TO CONTACT US. PLEASE NOTE THAT THIS ITEM IS A PART, AND THERE IS NO RETURN WARRANTY. PLEASE CONSIDER THIS BEFORE BIDDING. ? PRODUCT DETAILS MANUFACTURER: MICRO MODEL: A-1206 HOLE DIMENSIONS: APPROX. 69MM × 28MM THIS BASE IS SUITABLE FOR SHORT ARMS SUCH AS SME 3009 S2/3009 S3/3009 S2 IMP/3009-R/3010-R. COMPATIBLE MODELS INCLUDE BL-91/BL-101/BL-111/RX-2000/SX-111FV/SX-555FVW/SX-777FV. ? ACCESSORIES ARM MOUNTING SCREWS ×4 PLEASE NOTE THAT ALL ITEMS SHOWN IN THE PHOTOS ARE INCLUDED. PLEASE VERIFY. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

LUXMAN ARM BASE TF-LS PD300 / PD310 / PD350 GENUINE SME TURNTABLE PARTS 228G Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? Luxman TF-LS Genuine Arm Base For PD300/PD310/PD350 ?Condition There are minor scratches and scuffs on the bottom surface, but there are no other noticeable damages, and it still has a good shine. This is a used item that has aged over time. Please understand that there may be minor scratches, dullness, and signs of use due to aging and usage before bidding. ?Product Details Manufacturer: Luxman Model Number: TF-LS External Dimensions: Diameter 130mm × Thickness 8mm Arm Mounting Area: Approximately 70mm (Vertical) × 30mm (Horizontal) Weight: Approximately 228g SME: 3009 S2, 3009 S2 Improved, 3009 S3, 3009-R, 3010-R ?Included Items Tonearm Mounting Screws × 4 ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

SME GENUINE SPACER FOR P-1 TONEARM TURNTABLE PARTS THICKNESS 10MM EXCELLENT+++++ Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? Sme P-1 Tonearm Genuine Spacer ?Condition There are no noticeable damages, and it has a beautiful shine. Considering its age, we judge it to be in excellent condition. This is a used item that has aged over time. Please understand that there may be minor scratches, scuffs, and signs of use due to aging and usage before bidding. ?Product Details Manufacturer: SME Model Number: P-1 Thickness: 10mm ?Included Items *Only the items in the photo are included. Please check carefully. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

Mein Vater hat dutzende Plattenspieler gesammelt und auch selber restauriert , revidiert und umgebaut. Verkaufe aus dieser Sammlung hier einen genialen Luxman px101 Tangentiale Tonarmfhrung und Halbautomatisch Der Tisch kann fr Euro 590,- separat gekauft werden. Tisch und Player haben nur leichte Lagerspuren . Ein Traum in schwarz und superschn , mit tollem Klang . Luxman Originalteile : Netzteil Teller Lager Achse Motor 1 x Tangentialtonarm mit SME-Anschluss Neues Gehuse in Aluminium u. Plexiglas , hochglanz schwarz . Alles ist wertig , schwer und solide , in bewehrter und revidierter Technik , mit tollem Klang und Haptik . Der Player wird ohne Tisch , Kabel und System aber mit roter Filzmatte und einem hochwertigen Reinigungsbesen geliefert. Bei Vorfhrung und Abholung , auf Grund des kritischen Versandes : Preisreduzierung auf : 1350,- ohne Tisch 1850,- mit Tisch Bitte anrufen unter : 0172 2985504 Als Privatverkufer gebe ich keine Garantie oder Rcknahme . Ich schliee auch jegliche Sachmangelhaftung ausdrcklich aus.

This turntable was tested and verified fully working, but please note that there are some cracks on the left side of the dust cover. The included power cord is compatible, but it is not the original one that came with the turntable. Arrives exactly as pictured.

Item TitleDenon Dk-100 Turntable Cabinet Sme 3009 For Tone Arm Record Player Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Template CDGSlightly scratched and dirtyBLU Description MICRO AX-4G Turntable Arm Base SME Long Arm Compatible Original Box Included ?ConditionThere are no noticeable scratches and it is shiny and in good condition. Considering its age, we judge it to be a good product. The original box has some dullness due to age/storage. This is a used item that has been around for a number of years.Please be aware of the scratches/scratches/feelings due to age/use before bidding. Since this product is a part, there is no return guarantee.Thank you for your understanding and consideration. ?Product contentsManufacturer: MICROModel number: AX-4GHole diameter: Height approx. 28mm x Width approx. 69mm ?Accessories?SME arm fixing screw x 4?Instruction manual (copy)?Original box (with internal cushioning material) *All items shown in the photo are included. Please check it. Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

For sale a Technics SL-110 turntable in excellent condition. Turntable works properly and keeps speed well, no issues. There are a strobe assembly with its original packaging, 45rpm adapter and tube of the motor oil and original manual. The pictured SME 3009 tonearm is NOT INCLUDED in this sale. Description (from website): An armless player system composed of SL-110 without the tone arm. A DC motor with ultra-low-speed electronic control is used for the motor. It is free from fluctuations in power supply voltage and power supply frequency, and large torque can be obtained with a small amount of electric power. This motor has an inertial mass of 320 kg ? cm.2Turntable reaches normal speed at 1/2 turn, and quick start is also available. The turntable is made of die-cast aluminum 35 cm in diameter and 2.0 kg in weight. The dynamic balance of each part is precisely adjusted, and the speed can be finely adjusted with a strobe. The motor, turntable and player case are made of die-cast aluminum, and the total weight reaches 13.5 kg. Since the arm base is fixed with screws, it can be attached and detached. The body is supported by four legs with built-in insulators to cut off external vibration, and the height can be adjusted by turning these legs. The output terminal is a pin-jack type. Dust cover is included. Arm panel (wood), strobe light and wood base were sold separately as options. Specifications: Type Direct drive player system Turntable 35 cm Aluminum Die-cast, 2.0 kg Inertial mass 320 kg / cm2 Motor Ultra-low speed electronic commutator motor Number of revolutions 33 1/3, 45 rpm Rotational frequency switching system Electronic control system Fine adjustment of rotational speed By electronic control system Rotation speed independent adjustment Rotational speed adjustment range + / - 5 per cent Wow flutter 0.03% or less (W. R. M.S.) Signal-to-noise ratio 60 dB or more Bootup Normal operation at 1/2 rotation (33 1/3rpm) Pwer 110 - 240V VAC, 50Hz/60Hz Power consumption 4.0W External dimensions Width 510x Height 195x Depth 390 mm Weight 13.5kg Check my other ads for more high quality vintage electronics.

Get ready to enjoy your vinyl records with this ION Audio iTTUSB10 turntable. The sleek silver design matches any decor, while the USB 2.0 connectivity allows for easy digital conversion of your favorite albums. This belt-drive turntable features headphone and stereo L/R RCA audio outputs, as well as speed settings for both 45RPM and 33.3RPM vinyl. With a CD recorder, you can now easily create digital copies of your favorite albums and enjoy them on the go. The headphone jack and features like belt drive ensure that you have a smooth and seamless listening experience. This turntable is perfect for any music enthusiast who values quality and style.

ADDITIONAL IMPORTANT NOTES (PLEASE READ): Please review all photos, read item descriptions carefully and please contact me with any questions that you have before bidding. Most items are used, vintage, and sold as-is unless stated otherwise. All sales are final.Payment via Paypal only and expected within three (3) days of the invoice. Items ships to the Paypal confirmed, US addresses only. Please note that handling may take up to two days, but will more than likely be sooner than that. I DO COMBINED SHIPPING FOR (MAGAZINES VHS BOOKS DVDS OR MUSIC CD ) IS A DOLLAR EXTRA PER ITEM .

ION Audio iTTUSB10 Turntable FOR RECORDING RECORD TO DISC ESTATE ITEM. NO COVER. COVER WAS DAMAGED IN MOVING TURNTABLE EXCELLENT..tested/COMES WITH 4 NEW NEEDLES

please take a look at other pioneer parts I have listed Original Pioneer Turntable Headshell SME Fit for PL-100 PL-200 PL-300 PL-400 in excellent condition

Technics SL-110 legendary direct drive turntable, classic design and very beautiful to watch, with SME 3009II Improved tonearm fitted, also fitted with the SME F. D. 200 fluid damper, and re-wired with Cardas AWG33 very fine wire to the cartridge. There isnt a cartridge included. The condition is excellent. I bought this new in 1975 from Berkshire HiFi near Reading. I went there with the intention of buying the new Linn LP12 but they had sold out ! Luckily for me.The Technics was 3 times the price of an LP12 system, so I was dubious until they told me that Robin Ray had bought an identical Technics setup the week before, so... Years later I added the Fluid Damper and re-wired the tonearm.