New retail $3000.00, great sounding cartridge.

New retail $3000.00, great sounding cartridge.

New retail $3000.00, great sounding cartridge.

ROKSAN SHIRAZ MC CARTRIDGE This auction is for 1(one) piece of ROKSAN SHIRAZ MC CARTRIDGE, VERY RARE!!! Condition: used, in excellent condition and very low playback hours. New silicone damper has been installed by Ana Mighty Sound. Tested in an IKEDA IT-407 tonearm with DIN 45549 test record.Tracking ability: 120 micron / 315 Hz / lateral / 22mN.Specifications: Type : Moving coil Output: 0.21 mV/cm/sec (RMS), 1.05 mV @ 5cm/sec recorded velocity Stylus: Super fine line - F. Gyger II ( 6 x 40 micron ) nude diamond Cantilever: Aluminium Tube Tracking weight: 2.2 -2.5 (2.4 grams recommended) Cartridge body: 5 axis machined solid aluminium alloy Generator fixing: Unique 3- point rigid fixing, spiked to body (without adhesive) Cartridge fixing : Standard 0.5 inch centres (12.7mm) Recommended load: 30-1000? (100? recommended) Coil impedance: 24? Frequency response: 5Hz - 30kHz Channel balance: Within 1dB Channel separation: 0dB/ 1 kHz F I M: < 0.5%, 19? Cartridge weight: 8.2 g With records becoming increasingly rare, not to say valuable, ROKSAN has sourced, in its opinion, the worlds best diamond profile design for the Shiraz cartridge. The Swiss-made F. Gyger II has a super fineline profile offering excellent tracking ability with stunning detail retrieval and low surface noise. Unlike spherical and conical profiles it smoothly negotiates the groove without harming the vinyl. The Shiraz body is made from solid aluminium on a computer controlled milling machine and is threaded and supplied with non-magnetic screws for easy alignment. The robust broadcast standard generator is uniquely fixed to the body with three spikes giving it precise alignment without using distortion inducing adhesives. Excessive cantilever movements at certain frequencies are damped by the capacitors mounted directly to the generator over the coil where they accurately preserve the minute signal. The Shiraz produces a relatively high output for a moving coil design, which is important for a good signal to noise ratio and channel separation, but will need careful matching to your preamplifier phono stage. I am the second owner. Please look at the photos! Item comes from a non-smoking and pet-free home!Please feel free to contact me with any questions. SHIPPING AND HANDLINGI sold and/or shipped more than 100 high-value phono cartridges so I know how to pack them safely. For high-value phono cartridges I am using courier shipping service. Any difference between quoted and actual shipping fee will be refunded. Please check my other auctions as well!Happy bidding! This is a private auction, all information was provided to my best knowledge. Therefore no warranty is provided and no return is accepted. Buyer is responsible for paying local customs fee and VAT. #1632 _gsrx_vers_859 (GS 7.0.21 (859))

Das ROKSAN Shiraz ist möglichweise die am besten klingende Variante eines EMT-Tonabnehmers. HERKUNFT: Aus dem Nachlass eines Hifi-Freundes. Baujahr laut Messchrieb: 1994 ZUSTAND: Das Shiraz wurde von mir getestet, angehört und unter dem Mikroskop begutachtet. Der Klang ist absolut top! Die Funktion ist einwandfrei. Unter dem Mikroskop zeigen sich kaum erkennbare Verschleißspuren (< 25 %). Insbesondere scheint auch das Dämpfungsgummi neuwertig zu sein. ANMERKUNG: Aufgrund des Alters muss das Shiraz irgendwann überarbeitet worden sein. Dafür spricht die offenbar professionell angebrachte Stützplatte für die Kontaktstifte, aber vor allem auch der Zustand des Diamanten und des Dämpfungsgummis. Allerdings fanden sich keine Belege dafür und sind daher nur eine Vermutung. LIEFERUMFANG: Sichere Verpackung im Holzkästchen (siehe Bilder). Messschrieb und Bedienungsanleitung. Der teilweise abgebildete Plattenspieler ist nicht Teil des Lieferumfangs und steht auch nicht zum Verkauf. BESONDERHEITEN: Professionell angebrachtes Anschlussfeld zur vereinfachten Montage. ÜBERGABE: Abholung oder Versand innerhalb Deutschlands auf Risiko des Käufer mit DHL für 5,50 € je Sendung möglich. GARANTIE: Alle Angaben erfolgen nach besten Wissen und Gewissen. Bilder sind Teil der Beschreibung. Nach EU-Recht kann ich als Privatanbieter keine Gewährleistung, Minderung oder Umtausch anbieten. Interessierte können sich vor Kauf das Angebot ansehen und gegebenenfalls testen. BEACHTEN SIE AUCH MEINE WEITEREN ANGEBOTE !

Das ROKSAN Shiraz ist möglichweise die am besten klingende Variante eines EMT-Tonabnehmers. HERKUNFT: Aus dem Nachlass eines Hifi-Freundes. Baujahr laut Messchrieb: 1994 ZUSTAND: Das Shiraz wurde von mir getestet, angehört und unter dem Mikroskop begutachtet. Der Klang ist absolut top! Die Funktion ist einwandfrei. Unter dem Mikroskop zeigen sich kaum erkennbare Verschleißspuren (< 25 %). Insbesondere scheint auch das Dämpfungsgummi neuwertig zu sein. ANMERKUNG: Aufgrund des Alters muss das Shiraz irgendwann überarbeitet worden sein. Dafür spricht die offenbar professionell angebrachte Stützplatte für die Kontaktstifte, aber vor allem auch der Zustand des Diamanten und des Dämpfungsgummis. Allerdings fanden sich keine Belege dafür und sind daher nur eine Vermutung. LIEFERUMFANG: Sichere Verpackung im Holzkästchen (siehe Bilder). Messschrieb und Bedienungsanleitung. Der teilweise abgebildete Plattenspieler ist nicht Teil des Lieferumfangs und steht auch nicht zum Verkauf. BESONDERHEITEN: Professionell angebrachtes Anschlussfeld zur vereinfachten Montage. ÜBERGABE: Abholung oder Versand innerhalb Deutschlands auf Risiko des Käufer mit DHL für 5,50 € je Sendung möglich. GARANTIE: Alle Angaben erfolgen nach besten Wissen und Gewissen. Bilder sind Teil der Beschreibung. Nach EU-Recht kann ich als Privatanbieter keine Gewährleistung, Minderung oder Umtausch anbieten. Interessierte können sich vor Kauf das Angebot ansehen und gegebenenfalls testen. BEACHTEN SIE AUCH MEINE WEITEREN ANGEBOTE !

ROKSAN SHIRAZ MC CARTRIDGE This auction is for 1(one) piece of ROKSAN SHIRAZ MC CARTRIDGE, VERY RARE!!! Condition: used, but in excellent condition and very low playback hours. Tested in an IKEDA IT-407 tonearm with DIN 45549 test record.Tracking ability: 120 micron / 315 Hz / lateral / 22mN.Specifications: Type : Moving coil Output: 0.21 mV/cm/sec (RMS), 1.05 mV @ 5cm/sec recorded velocity Stylus: Super fine line - F. Gyger II ( 6 x 40 micron ) nude diamond Cantilever: Aluminium Tube Tracking weight: 2.2 -2.5 (2.4 grams recommended) Cartridge body: 5 axis machined solid aluminium alloy Generator fixing: Unique 3- point rigid fixing, spiked to body (without adhesive) Cartridge fixing : Standard 0.5 inch centres (12.7mm) Recommended load: 30-1000? (100? recommended) Coil impedance: 24? Frequency response: 5Hz - 30kHz Channel balance: Within 1dB Channel separation: 0dB/ 1 kHz F I M: < 0.5%, 19? Cartridge weight: 8.2 g With records becoming increasingly rare, not to say valuable, ROKSAN has sourced, in its opinion, the worlds best diamond profile design for the Shiraz cartridge. The Swiss-made F. Gyger II has a super fineline profile offering excellent tracking ability with stunning detail retrieval and low surface noise. Unlike spherical and conical profiles it smoothly negotiates the groove without harming the vinyl. The Shiraz body is made from solid aluminium on a computer controlled milling machine and is threaded and supplied with non-magnetic screws for easy alignment. The robust broadcast standard generator is uniquely fixed to the body with three spikes giving it precise alignment without using distortion inducing adhesives. Excessive cantilever movements at certain frequencies are damped by the capacitors mounted directly to the generator over the coil where they accurately preserve the minute signal. The Shiraz produces a relatively high output for a moving coil design, which is important for a good signal to noise ratio and channel separation, but will need careful matching to your preamplifier phono stage. I am the second owner. Please look at the photos! Item comes from a non-smoking and pet-free home!Please feel free to contact me with any questions. SHIPPING AND HANDLINGI sold and/or shipped more than 100 high-value phono cartridges so I know how to pack them safely. For high-value phono cartridges I am using courier shipping service. Any difference between quoted and actual shipping fee will be refunded. Please check my other auctions as well!Happy bidding! This is a private auction, all information was provided to my best knowledge. Therefore no warranty is provided and no return is accepted. Buyer is responsible for paying local customs fee and VAT. #1631 _gsrx_vers_859 (GS 7.0.21 (859))

ROKSAN SHIRAZ MC CARTRIDGE This auction is for 1(one) piece of ROKSAN SHIRAZ MC CARTRIDGE, VERY RARE!!! Condition: used, but in excellent condition and very low playback hours. Tested in an IKEDA IT-407 tonearm with DIN 45549 test record.Tracking ability: 120 micron / 315 Hz / lateral / 22mN.Specifications: Type : Moving coil Output: 0.21 mV/cm/sec (RMS), 1.05 mV @ 5cm/sec recorded velocity Stylus: Super fine line - F. Gyger II ( 6 x 40 micron ) nude diamond Cantilever: Aluminium Tube Tracking weight: 2.2 -2.5 (2.4 grams recommended) Cartridge body: 5 axis machined solid aluminium alloy Generator fixing: Unique 3- point rigid fixing, spiked to body (without adhesive) Cartridge fixing : Standard 0.5 inch centres (12.7mm) Recommended load: 30-1000? (100? recommended) Coil impedance: 24? Frequency response: 5Hz - 30kHz Channel balance: Within 1dB Channel separation: 0dB/ 1 kHz F I M: < 0.5%, 19? Cartridge weight: 8.2 g With records becoming increasingly rare, not to say valuable, ROKSAN has sourced, in its opinion, the worlds best diamond profile design for the Shiraz cartridge. The Swiss-made F. Gyger II has a super fineline profile offering excellent tracking ability with stunning detail retrieval and low surface noise. Unlike spherical and conical profiles it smoothly negotiates the groove without harming the vinyl. The Shiraz body is made from solid aluminium on a computer controlled milling machine and is threaded and supplied with non-magnetic screws for easy alignment. The robust broadcast standard generator is uniquely fixed to the body with three spikes giving it precise alignment without using distortion inducing adhesives. Excessive cantilever movements at certain frequencies are damped by the capacitors mounted directly to the generator over the coil where they accurately preserve the minute signal. The Shiraz produces a relatively high output for a moving coil design, which is important for a good signal to noise ratio and channel separation, but will need careful matching to your preamplifier phono stage. I am the second owner. Please look at the photos! Item comes from a non-smoking and pet-free home!Please feel free to contact me with any questions. SHIPPING AND HANDLINGI sold and/or shipped more than 100 high-value phono cartridges so I know how to pack them safely. For high-value phono cartridges I am using courier shipping service. Any difference between quoted and actual shipping fee will be refunded. Please check my other auctions as well!Happy bidding! This is a private auction, all information was provided to my best knowledge. Therefore no warranty is provided and no return is accepted. Buyer is responsible for paying local customs fee and VAT. #1631 _gsrx_vers_859 (GS 7.0.21 (859))

ROKSAN SHIRAZ MC CARTRIDGE This auction is for 1(one) piece of ROKSAN SHIRAZ MC CARTRIDGE, VERY RARE!!! Condition: used, but in excellent condition and very low playback hours. Tested in an IKEDA IT-407 tonearm with DIN 45549 test record.Tracking ability: 120 micron / 315 Hz / lateral / 22mN.Specifications: Type : Moving coil Output: 0.21 mV/cm/sec (RMS), 1.05 mV @ 5cm/sec recorded velocity Stylus: Super fine line - F. Gyger II ( 6 x 40 micron ) nude diamond Cantilever: Aluminium Tube Tracking weight: 2.2 -2.5 (2.4 grams recommended) Cartridge body: 5 axis machined solid aluminium alloy Generator fixing: Unique 3- point rigid fixing, spiked to body (without adhesive) Cartridge fixing : Standard 0.5 inch centres (12.7mm) Recommended load: 30-1000? (100? recommended) Coil impedance: 24? Frequency response: 5Hz - 30kHz Channel balance: Within 1dB Channel separation: 0dB/ 1 kHz F I M: < 0.5%, 19? Cartridge weight: 8.2 g With records becoming increasingly rare, not to say valuable, ROKSAN has sourced, in its opinion, the worlds best diamond profile design for the Shiraz cartridge. The Swiss-made F. Gyger II has a super fineline profile offering excellent tracking ability with stunning detail retrieval and low surface noise. Unlike spherical and conical profiles it smoothly negotiates the groove without harming the vinyl. The Shiraz body is made from solid aluminium on a computer controlled milling machine and is threaded and supplied with non-magnetic screws for easy alignment. The robust broadcast standard generator is uniquely fixed to the body with three spikes giving it precise alignment without using distortion inducing adhesives. Excessive cantilever movements at certain frequencies are damped by the capacitors mounted directly to the generator over the coil where they accurately preserve the minute signal. The Shiraz produces a relatively high output for a moving coil design, which is important for a good signal to noise ratio and channel separation, but will need careful matching to your preamplifier phono stage. I am the second owner. Please look at the photos! Item comes from a non-smoking and pet-free home!Please feel free to contact me with any questions. SHIPPING AND HANDLINGI sold and/or shipped more than 100 high-value phono cartridges so I know how to pack them safely. For high-value phono cartridges I am using courier shipping service. Any difference between quoted and actual shipping fee will be refunded. Please check my other auctions as well!Happy bidding! This is a private auction, all information was provided to my best knowledge. Therefore no warranty is provided and no return is accepted. Buyer is responsible for paying local customs fee and VAT. #1631 _gsrx_vers_859 (GS 7.0.21 (859))

Roksan Shiraz moving coil cartridge for rebuild or trade-in This cartridge needs a full rebuild. It can be traded in for £850 discount against a new one from Roksan. (see analogueseduction website) I would send this to EMT, since it is an EMT cartridge. They will do a full rebuild to as-new. You could ship to EMT yourself, but you would need to arrange customs paperwork. Easier to let the UK EMT agent arrange things. EMT have moved to Switzerland from Germany. Price fluctuates with exchange rate against Swiss Franc. I asked UK agent late last year, rebuild price was about £1000, but that will depend on choice of stylus profile, and current exchange rate. UK registered buyers only I do not deliver to PO Boxes. That includes any similar parcel-receiving service, C/O addresses, mail-forwarding services and the like. Delivery only to confirmed address

Roksan SHIRAZ - moving coil cartridge. Was in good working order but with my butterfingers I accidently knocked the connector plug off the wire. Will need a solder, I didnt fancy giving it a go myself! Came off my uncles roksan xerxes turntable so I do not have the use history. Seems to look like plenty left on the stylus.

You are bidding on a used Roksan Shiraz MC Cartridge Working approximately 400hrs use. Supplied by me and one owner from new with smoke free and pet free environment This cartridge is working 100% and with very little wear There is plenty of movement within the “pole piece “once weight is applied The suspension is slightly stiff due not being used a great deal the last 10 years Bid with confidence and thanks for looking