Micro Seiki AX-1 tonearm base MA-505X RMG-212 DA303DescriptionMicro AX-1?Turntable arm base* Compatible arms: MICRO/MA-505X, 505S, 707X ADC/LMF-1, LMF-2 EMT/929 ORTOFON/RMG-212, SMG-212_2 AUDIO CRAFT/AC300C, A DENON/DA303, 305, 307, 309, 401 FR/FR54, 24MK2, 14 SAEC/WE-308N, 308SX, 407/23 GRACE/G-545F, 707, 840FB, 940, 945S, TECHNICS/EPA-101S, L, 99 PIONEER/PA-1000 INFINITY/FORMULA4ShippingI use a Japanese post office & Fedex & DHLStandard Shipping : 5-20 daysExpedited shipping:3-10 daysWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is available from Monday to Friday. Weekends are not available because freight ?(shipping) companies are closed.International Buyers - Please NoteImport duties, taxes and charges are not included in the product price or shipping costs.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.If the cancellation is by the buyer, we will charge a feeThese charges are the buyers responsibility.If there is a remote charge for your address, we will charge you for shipping separately.Thank you for your understanding.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.For used items: We cant guarantee long term operation or discolorationThank you and best regards,

Micro Seiki AX-1G Turntable Armboard for Micro Seiki SX8000/RX5000 Turntable

MICRO SEIKI AX-6G Long arm base Turntable Tested and working

Micro Seiki AX-4 SME 12 Tonarmbasis f. RX- / DDX- / DQX- Modelle - aus resonanzarmen Kunststoff, guter Zustand. Für SME 312, 3012, 3012R etc. Weitere da!

DescriptionIt is in good condition and can be used without any problems. The appearance is also beautiful for its age.All the items in the photo are included: 2 arm pipes, (XP-282AU, XP-282SC), micro turntable base AX6G, genuine output cable, and MICRO head shell.There are no problems with lifter operation and anti-skating function.The height adjustment elevation mechanism has been cleaned of any grease buildup that may have occurred over the years, and has been maintained with new grease for smooth operation.ShippingStandard Shipping : Via Japan Post, 1-3 weeks, with tracking.Expedited Shipping : Via Fedex or DHL, 3-7 days, with tracking.Packing is cardboard. Please be assured. *If your adress is in the remote areas defined by the flight (shipping) company, please pay the additional shipping fee with PayPal. Import duties, etc.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.

Micro Seiki AX-2 Tonarmbasis aus resonanzarmen Kunststoff f. RX- / DDX- / DQX- Modelle. Farbe silber schwarz. Für SME 3009 etc. 9 Arme. Guter Zustand. Weitere da!

MICRO SEIKI AX-1 Arm Base Tonearm Parts Tested and working fine, good conditionDescriptionUsed ; It has been confirmed to work. There are no noticeable scratches or stains and it is in very good condition. Manufacturer: MICRO Model No.: AX-1 Hole diameter: approx. 27mmShipping Standard Shipping(Japan Post,FedEx,DHL) The package will arrive 5-14days after shipment.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Micro Seiki MAX-237 Turntable Lifter Arm Elevator Weight Tone Arm for Parts Description Condition: Used MICRO Micro Seiki MAX-237 Turntable Lifter Arm Elevator Weight Tone Arm Parts [Junk] ?MICRO MAX-237 Turntable Lifter Arm, Elevator, Weight, and Tonearm Parts (Junk Item) Please note that this is a used item. Please bid after carefully reading the item condition below. Item Condition: The title may be partially estimated. These are parts for a turntable. Includes tonearm stopper, surrounding parts, elevator lever, weight, etc. As a used item, there are scratches and wear. The operation and condition of other parts not mentioned in the item condition are unconfirmed. Payment Please pay within 5 days after the auction closed. Shipping Only residents of the purchasing area are eligible to make purchases. If you really want the product and are not a resident, please contact us separately for assistanceTo save on shipping costs, foldable clothes and bags may be shipped folded. Please understand this. Returns Returns are free of charge, and refunds will be processed through eBay. However, please note that returns due to size or specification differences on the buyers end will not be accepted under any circumstances. Each brand has its own size and specification characteristics. For example, EU sizes or measurements in centimeters may vary slightly depending on the brand. International Buyers - Please Note: Import duties, taxes, and additional charges are not covered within the listed item price or shipping fees. These expenses fall under the responsibility of the purchaser.Before engaging in any bidding or purchasing activity, its advisable to consult with your countrys customs office to ascertain the potential costs involved.Typically, these additional charges are collected by the shipping company upon delivery or during item retrieval. Its crucial to distinguish these charges from supplementary shipping fees to avoid confusion.Adherence to governmental regulations prohibits the undervaluation of merchandise or mislabeling items as gifts. All products and shipments originate from Japan. In cases where specific details are not provided, the standard voltage for electrical appliances is typically AC100V. For instance, consider the voltage disparity between Japan and the United States, where the standard voltage diverges to AC200V. This discrepancy underscores the necessity of employing a voltage transformer to mitigate the risk of electrical malfunctions. Therefore, ensuring compatibility with electrical specifications is imperative for seamless functionality and longevity of your appliances.

This Micro Seiki AX-1 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-1 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Includes black 3 hole/slits washer. Has some marring from the base plate of a Micro Seiki 505 Tonearm that was mounted on it. Sold as is, an estate sale, no returns, refunds or exchanges.

This Micro Seiki AX-1 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-1 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Has some marring from the base plate of a Micro Seiki 505 Tonearm that was mounted on it as well as the nick shown in the pictures. Sold as is, an estate sale, no returns, refunds or exchanges.

This Micro Seiki AX-2 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-2 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Has some marring from the base plate of a SME Tonearm that was mounted on it. Sold as is, an estate sale, no returns, refunds or exchanges.

Micro Seiki Arm Base AX-7G for SME Description Condition: Used It has been stored with almost no use. I am selling it because I have no plans to use it in the future. The last photo 8 is an image of the installation, and only the arm bases 1 to 7 are listed. Please understand that it is a used item with small scratches and make your decision. (See photo) It is made of zinc casting and weighs about 4.6 kg. It is suitable for the RX-5000 series, but please check before making your decision. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Micro Seiki AX-4G Tonarmbasis Die Basis ist in einem sehr guten Zustand, da sie sehr wenig genutzt und gegen die Basis Dynavector DV3C ausgetauscht wurde. Gewicht netto 4.530 Gramm. Die Lieferung erfolgt in der Original Verpackung per versichertem DHL Versand.

Micro Seiki AX-1 Tonarmbasis Die Basis ist sehr wenig genutzt worden, weist allerdings zwei hartnäckige Klebespuren auf (siehe Fotos). Wenn die Klebespuren nicht wären könnte sie als wie neu bezeichnet werden. Es fehlt die Inbusschraube zum Festziehen, mitgeliefert werden jedoch die Ringe zur Befestigung, sowie die entsprechenden Schrauben und Muttern. Netto Gewicht 3.770 Gramm. Die Lieferung erfolgt per versichertem DHL Versand.

Micro Seiki AX-5G Arm Base From Japan Item Description This unit is in very good condition (please see photos). Shipping Policy We ship the item via DHL with tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Micro Seiki AX-2G Armboard for SME 3009/3009R/M2-09/M2-9R/309/IV/V

Please check the product condition and accessories in the pictures.Please note that this is an aged product and there are small scratches and other signs of use.The accessories are all shown in the picture.Please note that this item is also sold in stores in Japan, so it may be sold out. We accept PayPal, Visa, MasterCard, American Express and Discover. Items will be shipped via FedEx or EMS.Since it has a tracking number, please bid with confidence.Shipping is available from Monday to Friday.We do not ship on Saturdays, Sundays, or Japanese holidays as the courier is closed on those days.Shipping to PO BOX is not accepted. We accept returns within 30 days of receiving the product.However, the return shipping fee will be borne by the customer.We comply with our return policy. Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. Thank you for visiting our store!We have been selling online in Japan for over 15 years, so there is no need to worry about transactions. We will send high quality products all over the world.If you have a product you want to find in Japan, please feel free to contact us.We also have various other items for sale.Please take a look at the list of items for sale.Thank you.

MICRO SEIKI ORIG. OIL BAD f. MAX237 MAX282 beschädigt - s. die Abbildungen damaged - s. the pictures

everything in good condition

Seiki AX-7G ARM Base for Micro Record Players SME Parts Audio Equipment Parts Description MICRO Micro Seiki Long Arm This is a two-point mounting arm base for SME. When I bought the RX-5000 Im still using, I bought this as a spare for the SME long arm, but I attached the Saeku to another arm base, and ended up trying this arm base out a few times, but I kept it in storage without using it much. Im selling it because I dont plan on using it in the future. The last photo, photo 8, shows the installation image, and only the arm bases 1 to 7 are listed. Please understand that this is a used item with some small scratches. (See photo) Made of zinc casting, weighs approximately 4.6 kg It is compatible with the RX-5000 series, but please check before making your decision. Payment We accept Managed Payments ONLY. Please pay us within 5-10 days after the auction closed. Shipping I ship it in Expedited shipping(EMS,Fedex,DHL)I attach the tracking number. Please bid it without worrying*We can not use International e-Packet (Japan Post) service for some countries in Central Asia (Kazakhstan, Kyrgystan, Tajikistan etc.) If your shipping address is in these areas, please contact us before bidding. *For stuffed animal products, we may use compression bags for shipping (please understand that some wrinkles may occur). International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.* Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.* We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. ?CautionYou may need a plug adapter for the battery charger according to where you live and use.This chargers plug type is A

This Micro Seiki AX-2 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-2 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Has some marring from the base plate of a SME Tonearm that was mounted on it. Sold as is, an estate sale, no returns, refunds or exchanges.

This Micro Seiki AX-1 Armboard is a high-quality part for your DQX 1000 turntable. It is designed for precise and reliable performance, ensuring that your vinyl records will sound their best. The brand name Micro Seiki is known for its excellence in audio equipment, and this armboard is no exception.Crafted with precision, this armboard is made to last. It is compatible with a variety of turntables and cartridges, making it a versatile addition to your audio setup. Whether youre a seasoned audiophile or just starting out, this Micro Seiki AX-1 Armboard is a great choice for your DQX 1000 turntable as well as other Micro Seiki turntables that use a pole mount for the armboard. Has some marring from the base plate of a Micro Seiki 505 Tonearm that was mounted on it as well as the nick shown in the pictures. Sold as is, an estate sale, no returns, refunds or exchanges.

Follow us| Sign up for our newsletter Micro Seiki DQX-1000 - Audiophile Hifi Stereo Direct Drive Turntable with Speed Controller and AX-1 Tonearm For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Micro Seiki DQX-1000 Details & Testing Notes Cosmetic Condition:7/10: Good - Light signs of wear, looks used but well-maintained.Turntable and speed controller both show light signs of use and wear. Good overall physical condition. Please see all high resolution photographs below.Functional Notes:Function as intended and sounds great. - Original footers are depressed and no longer effective. We are including high quality 2” sorbothane footers to compensate. Please see the photos below for reference.Voltage:120V 50/60HzSerial #:00071615Original Box:NoManual:NoPower Cord:YesAdditional Items:Speed Controller, AX-1 Tonearm, Sorbothane FeetShipping Method:FedEx Ground (Domestic) / FedEx Economy, USPS Priority, Ebay Standard Delivery (International)Shipping Weight:35lbs (24x20x20) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1652 (GS 9.7.4 (1652))