Verkaufe neue SAES Hochtöner. Sie waren nie eingebaut oder angeschlossen , sind also neu. Aus dem geplanten Projekt ist leider nichts geworden, daher verkaufe ich sie nun. Daten finden sich im Internet. Da Privatverkauf keine Gewährleistung und keine Rückgabe. Ich schließe also jegliche Sachmängelhaftung aus.

1 x Seas Prestige TAFC / G H 883 6 Ohm Der Hochtöner war Nie verbaut.Kann aber geringe Gebrauchsspuren vom lagern haben

Upgrade your audio system with a pair of SEAS Prestige 27TBCD/GB-DXT H1499-06 tweeters, designed for high-quality sound. They were gently used in an active 2 way setup and work and sound great. 6 ohms, great frequency response.

SEAS H1147-06 Prestige 27TBC/G Aluminum/Magnesium Dome Tweeter. I bought these tweeters new years ago to go in my pair of QWLs and thats where they spent their days ever since until recently when I decided to decommission the speakers. The tweeters work flawless and show no harm other than minor dust and residual solder on the terminals. This listing is for the PAIR. Heres SEASs product page that includes a link to the PDF too: http://www.seas.no/index.php?option=com_content&view=article&id=57:h1147-06-27tbcg&catid=45&Itemid=239 Thanks for looking.

SEAS H1147-06 Prestige 27TBC/G Aluminum/Magnesium Dome Tweeter. I bought these tweeters new years ago to go in my pair of QWLs and thats where they spent their days ever since until recently when I decided to decommission the speakers. The tweeters work flawless and show no harm other than minor dust and residual solder on the terminals. This listing is for the PAIR. Heres SEASs product page that includes a link to the PDF too: http://www.seas.no/index.php?option=com_content&view=article&id=57:h1147-06-27tbcg&catid=45&Itemid=239 Thanks for looking.

SEAS H1147-06 Prestige 27TBC/G Aluminum/Magnesium Dome Tweeter. I bought these tweeters new years ago to go in my pair of QWLs and thats where they spent their days ever since until recently when I decided to decommission the speakers. The tweeters work flawless and show no harm other than minor dust and residual solder on the terminals. This listing is for the PAIR. Heres SEASs product page that includes a link to the PDF too: http://www.seas.no/index.php?option=com_content&view=article&id=57:h1147-06-27tbcg&catid=45&Itemid=239 Thanks for looking.

Seas 27TACGB (H1825) tweeters Purchase these new from Madisound about 3 months ago, for a JBL restoration project. New cost $200 pair.The restored speakers did not sell so now I am parting out said speakers. The Seas both measure 4.8 ohm (these are 6 ohm nominal drivers). Both work 100% as they should and are not even broken in yet. Maybe 3 hours listening time. These are extraordinary sounding tweeters for the money. Note: They are somewhat difficult to solder connections as the metal tabs are held in place with a plastic housing and tend to become loose if solder heat is applied too long. One tweeter had the tabs repaired/fixed with epoxy to hold tabs in place. I recommend to just solder the wire flat on to tab quickly. (I was previously trying to loop the wire through the tab hole and then solder both sides which caused those tabs to loosen) Will pack securely. Thank you!

SEAS H1147-06 Prestige 27TBC/G Aluminum/Magnesium Dome Tweeter. I bought these tweeters new years ago to go in my pair of QWLs and thats where they spent their days ever since until recently when I decided to decommission the speakers. The tweeters work flawless and show no harm other than minor dust and residual solder on the terminals. Heres SEASs product page that includes a link to the PDF too: http://www.seas.no/index.php?option=com_content&view=article&id=57:h1147-06-27tbcg&catid=45&Itemid=239 Thanks for looking.

Seas 27TACGB (H1825) tweeters Purchase these new from Madisound about 3 months ago, for a JBL restoration project. New cost $200 pair.The restored speakers did not sell so now I am parting out said speakers. The Seas both measure 4.8 ohm (these are 6 ohm nominal drivers). Both work 100% as they should and are not even broken in yet. Maybe 3 hours listening time. These are extraordinary sounding tweeters for the money. Note: They are somewhat difficult to solder connections as the metal tabs are held in place with a plastic housing and tend to become loose if solder heat is applied too long. One tweeter had the tabs repaired/fixed with epoxy to hold tabs in place. I recommend to just solder the wire flat on to tab quickly. (I was previously trying to loop the wire through the tab hole and then solder both sides which caused those tabs to loosen) Will pack securely. Thank you!

PAIR NEW SEAS Prestige 27TDFC H1189-06 Textile Dome Tweeters 8-ohm Norway this pair was not used, taken out of the box for a project , but never installedguaranteed perfect sound , perfect working tweeters

PAIR NEW SEAS Prestige 27TDFC H1189-06 Textile Dome Tweeters 8-ohm Norway this pair was not used, taken out of the box for a project , but never installedguaranteed perfect sound , perfect working tweeters

1 Paar SEAS Prestige 27TAC/GB - H1825-06 Metal Kalotten-Hochtöner.Beide Hochtöner befinden sich in einem einwandfreiem Zustand und wurden nur zum Test in eine Box eingebaut und 10 min. bei Zimmerlautstärke behört. Die Impedanz Prüfwerte sind im Foto schlecht zu sehen, sie sind 5,8Ohm und 5,7Ohm bei 10kHz.Versand EU: 15,99 Euro.