This item has been serviced. They have been cleaned inside and out. All controls and switches have been cleaned. Soldering has been checked and redone if needed or common practice. Relay has been serviced (if applicable or necessary) and any lamps/indicators replaced if needed. The control amp has been fitted with a new internal battery. Comes with remote, manuals and power leads.Fully tested and in perfect working order. Cosmetic condition: Please inspect the photos. There are a couple of stand-out marks but these will be hidden if stacked with control amp on top. Excellent condition overall. Discount given if collecting in person a demo will be given of course. Photos:Please have a good look at the photos as they are of the actual item for sale unless otherwise stated and will give you a good idea of the item condition. They will also show you any included accessories such as remote control. If the item comes with any accessories or original box it will be included in the photos and item description, if its not then assume it isnt included. Delivery:Free next working day delivery (unless otherwise stated) within mainland UK. For all other destinations, please ask for a delivery quote or use eBays GSP shipping programme. Items will be packaged to a high standard to avoid damage in transit. Returns:Returns accepted within 14 days, the item must be in the same condition as it was prior to original sale. Buyer pays for return delivery costs. If you receive your item and feel the item is not a described, please get in touch so that we can work together to resolve the issue. Please give us the chance to put it right before leaving feedback because sometimes issues cant be avoided but we always strive to ensure the customer is happy.

Created with Eselt - eBay Listing Design Editoraudiokeeper Welcome to My Audio Vintage World Created with Eselt - eBay Listing Design EditorTECHNICS SE-A1010 & SU-C1010 POWER AMPLIFIER / PREAMPLIFIER BOXES 100% working order The item will be well packed, so no worries at all !!! 230v model SpecificationsPower output: 70 watts per channel into 8? (stereo)Frequency response: 5Hz to 100kHzTotal harmonic distortion: 0.015%Damping factor: 70Input sensitivity: 1VSignal to noise ratio: 115dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 158 x 344mmWeight: 10.3kgFinish: goldNOTE: 1 OWNER, ALL LEADS, REMOTE CONTROL PLUS BOXES INCLUDED Shipping DPD / GLS

Created with Eselt - eBay Listing Design Editoraudiokeeper Welcome to My Audio Vintage World Created with Eselt - eBay Listing Design EditorTECHNICS SE-A1010 & SU-C1010 POWER AMPLIFIER / PREAMP 100% working order The item will be well packed, so no worries at all !!! 230v model SpecificationsPower output: 70 watts per channel into 8? (stereo)Frequency response: 5Hz to 100kHzTotal harmonic distortion: 0.015%Damping factor: 70Input sensitivity: 1VSignal to noise ratio: 115dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 158 x 344mmWeight: 10.3kgFinish: goldNOTE: 1 OWNER, ALL LEADS, REMOTE CONTROL PLUS BOXES INCLUDED Shipping DPD / GLS

BEAUTIFUL TECHNICS SU-C1010 Preamp and SE-A1010 Power Amp. Mint condition. Manuals included.Amazing performance. Phono section. TECHNICS SU-C1010 Preamp Control amplifier equipped with VGCA. Uses a newly developed low-noise amplifier VGCA (Variable Gain Control Amplifier).In VGCA, we have adopted a method in which the gain of the amplifier itself is changed instead of the amplifier configuration in which the signal is reduced by the input volume and then amplified, which was used in conventional amplifiers. This reduces noise and deterioration of dynamic range even when the volume is reduced. A Ni-cd battery is used as the power supply for the audio circuit to further improve sound quality. Equipped with a 6-channel input jack that supports multi-channel DVD audio. There is also a 6-channel output jack that allows you to control the levels of all channels with the main volume. The power supply is equipped with an R-core transformer that minimizes magnetic flux leakage. The power supply section is equipped with a TAKEII electrolytic capacitor. The relay is equipped with a silver-palladium / gold-clad contact relay. Equipped with two pre-out terminals for bi-amping. TypeControl amplifierInput Sensitivity / ImpedancePhono MM : 2.5mV/47k ?Tuner, CD, DVD-6ch, Aux, Tape1, Tape2/MD : 200mV/22k ?Total harmonic distortion factor0.01% (20 Hz to 20 kHz)Signal-to-noise ratioPhono MM:82dB(EIAJ)Tuner, CD, DVD-6ch, Aux, Tape1, Tape2/MD : 104 dB (EIAJ)112dB(IHF-A S=2V ratede output)Frequency characteristicTuner, CD, DVD-6ch, Aux, Tape1, Tape2/MD : 20 Hz to 20 kHz + 0 -0.3 dB3 Hz ~ 100 kHz + 0 -3dBRated outputPre out : 1V/500 ?Pwer100 VAC, 50Hz/60HzPower consumption10WExternal dimensionsWidth 430x Height 91.5x Depth 300 mmWeight3.8kgAttachmentSystem remote control TECHNICS SE-A1010 Power Amplifier Stereo power amplifier equipped with MOS class AA amplifier. Beautiful large analog VU-Meters.The pure class A voltage control amplifier and current supply amplifier are combined with a class AA bridge to improve sound quality. A newly developed Take II electrolytic capacitor has been adopted.This condenser is an upgraded version of an electrolytic condenser that uses a bamboo fiber mixed separator. The basic structure of the electrolytic condenser has been revised to improve sound quality.The input level volume is mounted on the back panel, and fine adjustment is possible when bi-amplifier drive or multi-amplifier drive is performed.Equipped with a power meter that can turn on / off the lighting.Uses a high-capacity OFC power cord with polarity display.Gold-plated input terminal is used.OCC wire material is used for internal wiring. TypeStereo power amplifierRated output100W + 100W (4 ?, 1 kHz, 0.05%)80W + 80W (6 ?, 20 Hz to 20 kHz, 0.02%)70W + 70W (8 ohm, 20 hz to 20 khz, 0.015%)Total harmonic distortion factor0.015% (20 Hz to 20 kHz -3dB, 8 ?)Frequency characteristic5 Hz ~ 100 kHz + 0 -3dBDamping factor70 (8 ?)Signal-to-noise ratio98dB(EIAJ)115dB(IHF66)Input Sensitivity / Impedance1V/20k ?Meter indication range0.001W ~ 200W (8 ?)Pwer100 VAC, 50Hz/60HzPower consumption210WExternal dimensionsWidth 430x Height 158x Depth 344 mmWeight10.3kg Shipping – To be calculated as actual shipping according to zip code. No charge for packaging.I will be listing, over the next few weeks, several top of the like equipment and accessories, all from my private audiophile collection.Thank you for looking and Happy Bidding !

Technics SE-A1010 + SU-C1010 Spitzenmodell (SU-A707, SU-A808, SU-A909, A1010) Es funktioniert einwandfrei, hervorragender Klang, innen alles original, optisch echte Fotos, alle Panellampen mit VU-Meter leuchten, beide Geräte sind „made in Japan“.Im Lieferumfang des Vorverstärkers ist eine neue Batterie enthalten!Die Power hat zwei Kratzer auf der Oberseite, das Gesicht ist großartig.Fernbedienung und für den Betrieb notwendige Kabel im Lieferumfang enthalten.Hier können Sie sehen es funktioniert: https://youtu.be/aOcy2rDPW74Bitte sehen Sie sich alle Bilder und den Film an! Versand nur in die EU. Keine Ausnahmen! KEINE RÜCKNAHME! Es funktioniert mit einer europäischen Spannung von 220–240 V.Sichere Verpackungsgarantie, kostenfrei!Wenn Sie Fragen haben, verwenden Sie bitte das eBay Messaging-System, ich antworte am selben Tag.Ich werde nur in die EU senden (29 Euro, DPD)!Nach dem Kauf müssen Sie mir eine Nachricht mit Ihrer E-Mail und Ihrer Telefonnummer senden, ohne dass DPD die Bestellung nicht annimmt!Kaufen Sie nicht, wenn Sie nicht einverstanden sind! ENGLISH: Good condition, few normal marks, see original pictures and video.Everything works fine.See above links.After you buy it you must send me a message with your email and your phone number, without these, DPD will not accept the order!Do not buy if you dont agree! Technics SE-A1010Super linearity and super sound quality - MOS Class AA circuitAudiophile quality TA-KEH II electrolytic capacitors120w x2 high power output (DIN 4ohms)Level control on rear panel for gain fine tuning for bi-amp useAluminium front panelLarge needle-type power metersA and/or B speaker selectorMeter light off switchHeadphone jackSpecifications of Technics® SE-A1010 Stereo Power Amplifier20Hz to 20kHz continuous power outputboth channels driven : 2 ´ 70W (8W)1kHz continuous power outputboth channels driven (THD: 1%) : 2 ´85W (8W)2 ´120W(4W)63Hz to 12.5kHz continuous power outputboth channels driven(THD: 0.7%) : 2x80W (8ohm)2 ´ 105W(4ohm)Total Harmonic Distortion (THD)rated power at 20Hz to 20kHz : 0.015% (8W)Intermodulation Distortion(50Hz : 7kHz = 4 : 1, SMPTE) : 0.007% (8W)Residual hum and noise : 0.3mVDamping factor : 70 (8W) and 35 (4W)Headphones output level / impedance : 540mV / 330WLoad impedance A or B : 4 to 16W (A or B) and 8 to 16W (A & B)Input sensitivity / impedance : 1V / 20kW @ Normal & DirectSignal to noise ratio : 115dB (IHF ’66), rated power 8W95dB, rated power 4WFrequency response : 5Hz to 100kHz (+0dB, -3dB)20Hz to 20kHz (+0dB, -0.5dB)Power supply : 230V to 240V AC 50HzPower consumption : 280W and 1.6W (standby)DimensionsWidth 430mmHeight 158mmDepth 344mmWeight 10.3 kgTechnics SU-C1010VGCA (Variable Gain Control Amplifier) satisfies new high fidelity demands of DVD audioBattery Drive Power Supply keeps AC noise out of the signal pathR Core transformer eliminates magnetic flux leakageAudiophile quality MASTER Series “TA-KEH II” electrolyte capacitors for high quality soundHi-Fi volume control with high quality soundAluminium front panelTechnics Remote Control System designed for high sound quality7-position inputs selectors (CD, DVD-6ch, Tape 1, Tape 2/MD, Tuner, Phono, Aux)Special outputs for Bi-amp connectionTape monitor switchTone controls at VIA TONE positionBalance controlMuting switch (by remote control)Specifications for the Technics SU-C1010Input sensitivity / impedance Line 200mV/22k OhmsPhono 2.5mV/47 ohmsPower Supply AC 230V, 50 HzDimensions Width 430mmHeight 91.5mmDepth 300mmWeight 3.8 kgMade in Japan This is a private sale. For this reason, warranty, guarantee and redemption are excluded.

Da ich meine Hi-Fi Anlage seit Jahren nicht mehr nutze, gebe ich jetzt die Komponenten ab. Der Technics Vorverstärker SU-C1010 und die Endstufe SE-A1010 sind aus erster Hand und von mir vor Jahren gekauft. Versand nur in Deutschland. Abholung ist natürlich möglich und stresst weniger die Komponenten. Technics SU-C1010 Stereo Control Vorverstärker / Vorstufe· Top Vorverstärker / Vorstufe mit sehr guten Klangeigenschaften· VGCA-Schaltung · Bi-Amp Anschluss· TA-KEH II (Bambus) Kondensatoren· Batteriebetrieb· THDP· 6 Eingänge (vergoldet) / Phono MM· Muting· Balanceregler· Bass-/Höhenregler· Fernbedienungssystem mit 45 Tasten· Detaillierte Details siehe Hersteller Die Geräte haben optische Gebrauchsspuren (siehe Bilder).Der eingebaute Akku war altersbedingt ermüdet und wurde entfernt. Jedoch kann er leicht durch einen neuen ersetzt werden. Das Gerät funktioniert aber ganz normal am Stromnetz. Der Lautstärkeregler knackt beim Ändern der Lautstärke. Technics SE-A1010 Stereo Power Amplifier / VerstärkerAnzahl der Eingänge:· 2 x RCA (siehe Bild)· Technische Daten· Schaltungskonzept: Mos Class AA· Dauerleistung: o 8 Ohm: 2 x 85 W o 4 Ohm: 2 x 120 W Besondere Ausstattungen · 2 große analoge Ausgangsleistungsanzeigen· Farbe: Champagner Detaillierte Details siehe HerstellerOptisch mit leichten Gebrauchsspuren aber technisch voll funktionsfähig. Versand erfolgt mit 2 getrennten DHL Paketen mit Sendungsverfolgung (Vor- und Endstufe getrennt). 33 Euro sind die Versandkosten beider Pakete zusammen einschließlich Verpackung. Bei Fragen oder Angeboten einfach melden!Dies ist ein Privatverkauf ohne Garantie und Gewährleistung. Viel Spaß beim Bieten!eBay übernehme ich, Hinweis an den Höchstbietenden/Käufer: Diese Artikelbeschreibung wurde nach neuestem Wissen über diesen angebotenen Artikel erstellt. Wegen der neuen Gesetzeslage wird dieser Auktionsartikel unter Ausschluss jeglicher Garantie, Gewährleistung und Produkthaftung versteigert und schließt somit auch das neue EU-Recht aus. Dies ist ein wichtiger Bestandteil des Kaufvertrages und wird vom Käufer durch die Abgabe eines Gebotes endgültig anerkannt. Sie, der Höchstbietende, erwerben diesen Artikel anläßlich einer Internetauktion bei eBay. Sie haben deshalb kein Widerrufs- und Rückgaberecht bezüglich des von Ihnen ersteigerten Artikels nach § 312 d Abs. 4 Nr. 5 BGB. Dies gilt für ALLE eBayer, auch für die Spassbieter!!! Bei unversicherten Versand wird keine Haftung übernommen !!!

Created with Eselt - Responsive Templates for eBay Sellers Seller Profile Feedback Save this seller Contact TECHNICS SE-A1010 + SU-C1010 STEREO AUDIO SET SpecificationsPower output: 70 watts per channel into 8? (stereo)Frequency response: 5Hz to 100kHzTotal harmonic distortion: 0.015%Damping factor: 70Input sensitivity: 1VSignal to noise ratio: 115dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 158 x 344mmWeight: 10.3kgFinish: gold TE REMOTE CONTROL ( REPLACEMENT ) INCLUDEDALL LEADS INCLUDED in very good condition 100% working order 230v model NOTE: ITEM WILL BE DISPATCHED ON TUESDAY THE 4th JULY Shipping within 7 working days via

Created with Eselt - Responsive Templates for eBay Sellers Seller Profile Feedback Save this seller Contact TECHNICS SE-A1010 + SU-C1010 STEREO AUDIO SET SpecificationsPower output: 70 watts per channel into 8? (stereo)Frequency response: 5Hz to 100kHzTotal harmonic distortion: 0.015%Damping factor: 70Input sensitivity: 1VSignal to noise ratio: 115dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 158 x 344mmWeight: 10.3kgFinish: gold TE REMOTE CONTROL ( REPLACEMENT ) INCLUDEDALL LEADS INCLUDED in very good condition 100% working order 230v model NOTE: ITEM WILL BE DISPATCHED ON TUESDAY THE 13th JUNE Shipping within 7 working days via

Technics Amplifier SU-C1010 & Stereo Power Amplifier SE-A1010. Both are used in good condition, there is some markings / scratches on both units, there is no remote controls and you will need a power lead (stand cable) as safer to ship. The power amp has no panel lights (power meter as bulbs need replacing) but works fine Units will be sent in 2 separate packages tracked No silly offers and they will not be split

Technics Amplifier SU-C1010 & Stereo Power Amplifier SE-A1010. Both are used in good condition, there is some markings / scratches on both units, there is no remote controls and you will need a power lead (stand cable) as safer to ship. The power amp has no panel lights (power meter as bulbs need replacing) but works fine Units will be sent in 2 separate packages tracked No silly offers and they will not be split