Schiit Vidar 1 in excellent condition both cosmetically and in function. I was using a pair of these as mono blocks and have since changed my system.

Normal 0 false false false EN-US X-NONE X-NONE Schiit Audio Vidar Stereo / Mono Power Amplifier Please View ALL pictures, They Are Part of the Description!!!!! (Click on main picture to enlarge) Please read entire description! Selling my Schiit Vidar Stereo / Mono power amplifier in excellent condition! This is my last one, and it is in Silver. It sounds amazing! Serial number 2201328 Specifications Power Output: Stereo, 8 Ohms: 100W RMS per channel Stereo, 4 Ohms: 200W RMS per channel Mono, 8 ohms: 400W RMS Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB THD: <0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms IMD: <0.01%, CCIR, at 100W RMS into 8 ohms SNR: >115db, A-weighted, referenced to full output Damping Factor: >100 into 8 ohms, 20-20kHz Gain: 22 (27dB) Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 28V/22. You do the math. Input Impedance: 22k ohms SE, 44k ohms balanced Crosstalk: >95dB, 20-20kHz Inputs: L/R RCA jacks for stereo input, single XLR for mono input Do some research on this amp and you will find my Buy-it-Now price very fair! ($410 was the lowest one I could find on eBay that actually sold and that one had $49.15 for shipping!) Sorry, I do not accept returns. Free shipping in the USA (Lower 48 states) via FedEx, signature may be required at delivery! PHYSICAL CONDITION: See pictures as they are part of the description! Will Ship Worldwide! (Via eBay Global Shipping) SEE PICTURES!!!!!! I am very careful about packing electronics that I sell here on eBay, and that it will be packed very well! Check out our other items now available on eBay! I guarantee my descriptions...you can buy/bid in confidence! Any other items seen in the photos are not part of this auction but will be available soon here on eBay. Thank you for viewing this auction and please consider bidding! Please Read the following Terms, by bidding you agree to them: (I really am easy to work with!) I encourage you to read my feedback before you bid...I am proud of my high feedback rating! Because this item is a vintage electronic device, it is sold as is (This includes any issues unknown by the seller that the item MAY ,but not likely have, upon ultimate further inspection and evaluation by the buyer) No guarantees, implied or written except for item description. Full refund of purchase price minus shipping to and from buyer. Must e-mail 48 hours after receipt for claim. No Returns except for item description guarantee. Payment must be received within 7 days of winning auction unless prior agreement is made. If paying by other than PayPal, then please send e-mail indicating how and when payment will be sent. I am willing to work with you, but due to recent non-payers, I have to implement this rule. Thanks for understanding! I only ship to confirmed eBay addresses

Schiit Audio Vidar 1. I got 4 Vidar power amplifiers for sale . All brought almost the same time 2 years No original boxes Only the Power Amp and power cable . They look almost new .

Product page: https://web.archive.org/web/20201111204041/https://www.schiit.com/products/vidar Works great, excellent physical condition. Only used for a few months before I decided that it was overkill for my setup. Ships in original Schiit packaging with original power cord included. Orders received before 8 PM Eastern time ship the next business day.

(Apologies for relisting this several times to take advantage of eBay 70% off Fees special offers, and a cancelled order). Okay. Let’s blow up this high-end nonsense. Here’s your ultra-high-end amplifier, without the ultra-high-end price. Welcome to the revolution.No-Excuses Amp, No-brainer Price Schiit Vidar is nothing less than a no-excuses, exotic-topology, Class-AB, linear-supply, microprocessor-controlled, power-doubling, dual-mono-ish, intelligently-managed, drives-almost-anything power amp. No Class D, no switching supplies, no fans, no compromises, nothing in the signal path but music—for a three-figure price tag.Small Size, Big Power Don’t let the compact size fool you—pick up the Schiit Vidar to get a real feeling for the beefy 600VA transformer inside. Vidar may be small, but it’s also a powerhouse, delivering 100W per channel into 8 ohms, doubling to 200W per channel into 4 ohms.Stereo or Mono Flexibility Combine the Schiit Vidar with a single-ended preamp like Saga for a complete system with insane, no-compromise performance—for just a little over a grand. Or, run two Schiit Vidars from a preamp with balanced outputs (like our Freya) for true mono block performance and 400 watts per channel into 8 ohms.Intelligent Oversight and Protection The Schiit Vidar, has a microprocessor that oversees all important aspects of amplifier operation, from DC offset to over-current and over-temperature faults. This provides stable, safe operation without invasive current-limiting, fuses, or active devices in the power supply path. In English, Vidar makes sure it’s operating optimally at all times—and protects itself when it needs to, so you can be assured of excellent performance for a long, long time.Made in USA. Really. By “made in USA,” we mean made in USA. Specs Power Output: Stereo, 8 Ohms: 100W RMS per channel Stereo, 4 Ohms: 200W RMS per channel Mono, 8 ohms: 400W RMS Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB THD: Less than 0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms IMD: Less than 0.01%, CCIR, at 100W RMS into 8 ohms SNR: Greater than 125db, A-weighted, referenced to full output Damping Factor: Greater than 100 into 8 ohms, 20-20kHz Gain: 22 (27dB) Input Impedance: 22k ohms SE, 44k ohms balanced Crosstalk: Greater than 95dB, 20-20kHz Inputs: L/R RCA jacks for stereo input, single XLR for mono input Topology: Fully complementary, all BJT, current feedback, no coupling capacitors or DC servos Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with with relay shut-down for over current, thermal, and other faults Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management. Power Consumption: 700W maximum Size: 22.86 x 330.2 x 9.84 cm Weight: 13.61 Kg *All measurements made on a Stanford Research SR1+ Audio Analyser

The item pictured is item for sale. See photos for condition. Overall very nice shape but heatsink fins do have some minor marks. Amp was purchased in mid 2021 and was minimally used. Includes original box, manual etc. Might be the best bang for the buck amp on the market if you need 100 wpc. Drove my vintage KEF 104.5 very nicely. Shipping cost is calculated based on weight and size of the box and how far you are from my shipping location. If you have any questions please feel free to ask.

Schiit Vidar 1 Black 115VAC USA Plug Used Class A/B Stereo Amplifier. 5 way binding posts, RCA inputs, and balanced XLR mono input.100W of power per channel into 8 ohms stereo mode.200W of power per channel into 4 ohms stereo mode.400W of power per channel into 8 ohms mono mode.Retail: $70022lb, Width 9in, Height 3.9in, Depth 13in Stock power cable included.

Okay. Let’s blow up this high-end nonsense. Here’s your ultra-high-end amplifier, without the ultra-high-end price. Welcome to the revolution.No-Excuses Amp, No-brainer Price Schiit Vidar is nothing less than a no-excuses, exotic-topology, Class-AB, linear-supply, microprocessor-controlled, power-doubling, dual-mono-ish, intelligently-managed, drives-almost-anything power amp. No Class D, no switching supplies, no fans, no compromises, nothing in the signal path but music—for a three-figure price tag.Small Size, Big Power Don’t let the compact size fool you—pick up the Schiit Vidar to get a real feeling for the beefy 600VA transformer inside. Vidar may be small, but it’s also a powerhouse, delivering 100W per channel into 8 ohms, doubling to 200W per channel into 4 ohms.Stereo or Mono Flexibility Combine the Schiit Vidar with a single-ended preamp like Saga for a complete system with insane, no-compromise performance—for just a little over a grand. Or, run two Schiit Vidars from a preamp with balanced outputs (like our Freya) for true mono block performance and 400 watts per channel into 8 ohms.Intelligent Oversight and Protection The Schiit Vidar, has a microprocessor that oversees all important aspects of amplifier operation, from DC offset to over-current and over-temperature faults. This provides stable, safe operation without invasive current-limiting, fuses, or active devices in the power supply path. In English, Vidar makes sure it’s operating optimally at all times—and protects itself when it needs to, so you can be assured of excellent performance for a long, long time.Made in USA. Really. By “made in USA,” we mean made in USA. Specs Power Output: Stereo, 8 Ohms: 100W RMS per channel Stereo, 4 Ohms: 200W RMS per channel Mono, 8 ohms: 400W RMS Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB THD: Less than 0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms IMD: Less than 0.01%, CCIR, at 100W RMS into 8 ohms SNR: Greater than 125db, A-weighted, referenced to full output Damping Factor: Greater than 100 into 8 ohms, 20-20kHz Gain: 22 (27dB) Input Impedance: 22k ohms SE, 44k ohms balanced Crosstalk: Greater than 95dB, 20-20kHz Inputs: L/R RCA jacks for stereo input, single XLR for mono input Topology: Fully complementary, all BJT, current feedback, no coupling capacitors or DC servos Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with with relay shut-down for over current, thermal, and other faults Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management. Power Consumption: 700W maximum Size: 22.86 x 330.2 x 9.84 cm Weight: 13.61 Kg *All measurements made on a Stanford Research SR1+ Audio Analyser

Okay. Let’s blow up this high-end nonsense. Here’s your ultra-high-end amplifier, without the ultra-high-end price. Welcome to the revolution.No-Excuses Amp, No-brainer Price Schiit Vidar is nothing less than a no-excuses, exotic-topology, Class-AB, linear-supply, microprocessor-controlled, power-doubling, dual-mono-ish, intelligently-managed, drives-almost-anything power amp. No Class D, no switching supplies, no fans, no compromises, nothing in the signal path but music—for a three-figure price tag.Small Size, Big Power Don’t let the compact size fool you—pick up the Schiit Vidar to get a real feeling for the beefy 600VA transformer inside. Vidar may be small, but it’s also a powerhouse, delivering 100W per channel into 8 ohms, doubling to 200W per channel into 4 ohms.Stereo or Mono Flexibility Combine the Schiit Vidar with a single-ended preamp like Saga for a complete system with insane, no-compromise performance—for just a little over a grand. Or, run two Schiit Vidars from a preamp with balanced outputs (like our Freya) for true mono block performance and 400 watts per channel into 8 ohms.Intelligent Oversight and Protection The Schiit Vidar, has a microprocessor that oversees all important aspects of amplifier operation, from DC offset to over-current and over-temperature faults. This provides stable, safe operation without invasive current-limiting, fuses, or active devices in the power supply path. In English, Vidar makes sure it’s operating optimally at all times—and protects itself when it needs to, so you can be assured of excellent performance for a long, long time.Made in USA. Really. By “made in USA,” we mean made in USA. Specs Power Output: Stereo, 8 Ohms: 100W RMS per channel Stereo, 4 Ohms: 200W RMS per channel Mono, 8 ohms: 400W RMS Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB THD: Less than 0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms IMD: Less than 0.01%, CCIR, at 100W RMS into 8 ohms SNR: Greater than 125db, A-weighted, referenced to full output Damping Factor: Greater than 100 into 8 ohms, 20-20kHz Gain: 22 (27dB) Input Impedance: 22k ohms SE, 44k ohms balanced Crosstalk: Greater than 95dB, 20-20kHz Inputs: L/R RCA jacks for stereo input, single XLR for mono input Topology: Fully complementary, all BJT, current feedback, no coupling capacitors or DC servos Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with with relay shut-down for over current, thermal, and other faults Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management. Power Consumption: 700W maximum Size: 22.86 x 330.2 x 9.84 cm Weight: 13.61 Kg *All measurements made on a Stanford Research SR1+ Audio Analyser

The offer is for one Schiit Vidar in excellent condition No smokers and no pets. They were originally purchased together for the purpose of running two separately powered monoblocks, each bridged to dedicate its power to one channel. This is an awesome deal for a pair of amps that have been used in systems with multiple speakers and amps, so this pair shares its time with other amps. These monoblocks have not seen a lot of use and I am the 2nd owner. Amps new in late 2020. Please note that the amps are also listed on other sites like the audio mart, so listing may be removed at any time. There are many reviews posted so I wont bother leaving detailed specs other than a couple of important facts:1. a single unit will deliver, for 2 channel operation, 100wpc 4ohms/200wpc 8ohms using RCA inputs on the amp2. the Vidar can deliver 400wpc but only using the XLR input3. you will get a much improved (cleaner and fuller) presentation running in a bridged mode - one channel per amp. That was how I used them with spectacular results4. In case youre wondering, you will get inferior results if you try to use an xlr-to-rca cable and drive the amp (RCA from preamp to XLR Vidar input) Orig power cord included The amp weighs 22lb, around 27lbs packaged/boxed.

The offer is for one Schiit Vidar in excellent condition (Pair Available where Serial #s are sequential, so they were assembled on the same day). Great opportunity to buy a pair. No smokers and no pets. They were originally purchased together for the purpose of running two separately powered monoblocks, each bridged to dedicate its power to one channel. This is an awesome deal for a pair of amps that have been used in systems with multiple speakers and amps, so this pair shares its time with other amps. These monoblocks have not seen a lot of use and I am the 2nd owner. Amps new in late 2020. Please note that the amps are also listed on other sites like the audio mart, so listing may be removed at any time. There are many reviews posted so I wont bother leaving detailed specs other than a couple of important facts:1. a single unit will deliver, for 2 channel operation, 100wpc 4ohms/200wpc 8ohms using RCA inputs on the amp2. the Vidar can deliver 400wpc but only using the XLR input3. you will get a much improved (cleaner and fuller) presentation running in a bridged mode - one channel per amp. That was how I used them with spectacular results4. In case youre wondering, you will get inferior results if you try to use an xlr-to-rca cable and drive the amp (RCA from preamp to XLR Vidar input) Orig power cord included The amp weighs 22lb, around 25lbs packaged/boxed.

The offer is for a pair of Schiit Vidars in excellent condition. No smokers and no pets. They were originally purchased together (Serial #s are sequential) for the purpose of running two separately powered monoblocks, each bridged to dedicate its power to one channel. This is an awesome deal for a pair of amps that have been used in systems with multiple speakers and amps, so this pair shares its time with other amps. These monoblocks have not seen a lot of use and I am the 2nd owner. Amps new in late 2020. Please note that the amps are also listed on other sites like the audio mart, so listing may be removed at any time. There are many reviews posted so I wont bother leaving detailed specs other than a couple of important facts:1. a single unit will deliver, for 2 channel operation, 100wpc 4ohms/200wpc 8ohms using RCA inputs on the amp2. the Vidar can deliver 400wpc but only using the XLR input3. you will get a much improved (cleaner and fuller) presentation running in a bridged mode - one channel per amp. That was how I used them with spectacular results4. In case youre wondering, you will get inferior results if you try to use an xlr-to-rca cable and drive the amp (RCA from preamp to XLR Vidar input) Orig power cords included The amps together weigh about 45lbs and may be shipped in separate boxes.