ScanSpeak Discovery Line 30W/0-00 12 Passive RadiatorAluminium Cone, Black AnodizedFiberglass/Paper Sandwich Dust Cap, Black CoatedNomex spiderLow damping rubber surroundAdjustable weight56mm peak to peak excursion (+/-28mm)Match this passive to the Scan-speak Discovery 30W/4558T subwoofer or the Peerless 835017 subwoofer. This will also work well with the older Peerless 830500 subwoofer. The 30W/4558T and the 30W/0-00 in a 2.5 cubic foot box should be 3dB down at 30Hz.

THIS TWEETERS ARE VERY HIGH QUALITY HI-END, MADE FOR AVLON ACOUSTICS. These PAIR of tweeters extend beyond 40KHz with a very good frequency response and really heavy. The Norminal RMS is 120 WATTS on 8Ohms (check the technical SPL vs Freq. graph) According to sources, they were designed by Avlon Acoustic and they abundant it because it was alleged the company claimed it was too expensive and opted for a cheaper version. Just look at the size of the magnet, so big like a Hi-End midrange drive and they very heavy too. Over 1kg in weight. Compare it in size to the Scanspeak illuminator tweeters in the photos? take the chance to grab a bargain. I have come by a box and are in stock so contact me if you are interested on 07930498660 .

These drive units are used in the $20,000USD Hi- End Ferrari speakers manufactured in collaboration with David Wiener, DW of Art Engine (the 1 tweeters and 3.5 kevlar midbass) The 3.5 Silver midbass are the signature version of DW Art Engine drive units specially made by Scanspeak and are used in the Hi-End Art Engine DW Collection: the Art Studio speakers. The drive units were designed by David Wiener and theyre made by Scanspeak. The Ferrari Art Engine cost $20,000USD for a single speaker. The last 3 photos shows the drive units in their cabinets and are NOT included in the sales. The drive units are very unique in terms of their features and they produce a very good bass and power compare to the size.These are what you will receive>>>Tweeters 1 pair (2×)I soft domeImpedance ------ 8 ohmsFreq. Resp. ------ 900Hz to 30kHzPower output --- 80W Ferrari Art Engine 3.5 midbass Black kevlar drive units. 2x1 pairImpedance --------- 8 Ohms.Freq. Resp. --------- 60Hz to 5kHzPower output --------- 80W Art Engine DW Collection- Art Studio 3.5 midbass, silver. 2x1 pair Impedance ??------- 16 OhmsFreq. Resp. --------- 70Hz to 4kHzPower output --------- 70W rms You will not find these drive units anywhere. Even Scan speak dont produce themselves .I have some qualities in stock so you can contact me on: +447930498660. Buyers are welcome. Please DONT send payment until I send the invoice with the correct shipping cost if youre an international buyer.

SCANSPEAK Tweeter from Wilson Audio oem parts. These were from a Wilson audio speaker, they are in great condition, and sound amazing, see measurments, perfectly flat from 3k to 15k, an incredible device, also they show close matching as you can see in the graph where ones curve is in red. Excellent état et fonctionnement comme en attestent les mesures, réponse excellente de 3k à 15k, c est un tweeter exceptionnel fabriqué par Scanspeak pour Wilson Audio Idéal pour une enceinte 2 ou 3 voies

2 SCANSPEAK TWEETERS D2008/851100 8 OHM. I collected the and the seller told me hed taken from his Naims having had them from new. I have not used during the 2 years since then. Classic range but now replaced with some costing about 150. Before then they were in the range over 30 years. Bumf says power 90W Sensitivity 89db Faceplate 92mm Crossover suggestion 4KHz (2nd order) DC continuity.6.5/6.4 Ohms Buyer pays any duties charged in delivery jurisdiction

Naim Allae speakers with brand new 1:1 replacement Scanspeak D2008/851100 Tweeters fitted (matched pair) Includes original boxes, floor spikes, standoffs/pegs & Naim speaker cable (designed for use with Naim amplifiers) Would ideally sell as a set (with a bundle deal) - see my other Naim listings for NAC62 & NAP140 and CD5i.

Linn Ninka Floor Standing Speakers with Scanspeak Tweeters. Excellent working order although the cabinets do have a few marks (and which could probably be touched up) - and a small chip in the top right corner of one of the speakers. I have tried to highlight in the photos. I have replaced and upgraded the tweeters with the Scanspeak D2008/851200 from Falcon Acoustics Collection from Crouch End, N8

SCANSPEAK Tweeter from Wilson Audio oem parts. These were from a Wilson audio speaker, they are in great condition, and sound amazing, see measurments, perfectly flat from 3k to 15k, an incredible device, also they show close matching as you can see in the graph where ones curve is in red. Excellent état et fonctionnement comme en attestent les mesures, réponse excellente de 3k à 15k, c est un tweeter exceptionnel fabriqué par Scanspeak pour Wilson Audio Idéal pour une enceinte 2 ou 3 voies

Scanspeak D2008 tweeter in good working order.Suitable for use in Proac Tablette Linn Kan etc Few small dents in the domePlease see photos.

These drive units are used in the $20,000USD Hi- End Ferrari speakers manufactured in collaboration with David Wiener, DW of Art Engine (the 1 tweeters and 3.5 kevlar midbass) The 3.5 Silver midbass are the signature version of DW Art Engine drive units specially made by Scanspeak and are used in the Hi-End Art Engine DW Collection: the Art Studio speakers. The drive units were designed by David Wiener and theyre made by Scanspeak. The Ferrari Art Engine cost $20,000USD for a single speaker. The last 3 photos shows the drive units in their cabinets and are NOT included in the sales. The drive units are very unique in terms of their features and they produce a very good bass and power compare to the size.These are what you will receive>>>Tweeters 1 pair (2×)I soft domeImpedance ------ 8 ohmsFreq. Resp. ------ 900Hz to 30kHzPower output --- 80W Ferrari Art Engine 3.5 midbass Black kevlar drive units. 2x1 pairImpedance --------- 8 Ohms.Freq. Resp. --------- 60Hz to 5kHzPower output --------- 80W Art Engine DW Collection- Art Studio 3.5 midbass, silver. 2x1 pair Impedance ??------- 16 OhmsFreq. Resp. --------- 70Hz to 4kHzPower output --------- 70W rms You will not find these drive units anywhere. Even Scan speak dont produce themselves .I have some qualities in stock so you can contact me on: +447930498660. Buyers are welcome. Please DONT send payment until I send the invoice with the correct shipping cost if youre an international buyer.

Linn Ninka Floor Standing Speakers with Scanspeak Tweeters. Excellent working order although the cabinets do have a few marks (and which could probably be touched up) - and a small chip in the top right corner of one of the speakers. I have tried to highlight in the photos. I have replaced and upgraded the tweeters with the Scanspeak D2008/851200 from Falcon Acoustics Collection from Crouch End, N8

Top Ersatzteile im guten Zustand Bei einen Hochtöner wurde die Kalotte getauscht allso nicht mehr Original aber funktional. Bei den anderen ist alles Original und er funktioniert einwandfrei

SCANSPEAK Tweeter from Wilson Audio oem parts. These were from a Wilson audio speaker, they are in great condition, and sound amazing, see measurments, perfectly flat from 3k to 15k, an incredible device, also they show close matching as you can see in the graph where ones curve is in red. Excellent état et fonctionnement comme en attestent les mesures, réponse excellente de 3k à 15k, c est un tweeter exceptionnel fabriqué par Scanspeak pour Wilson Audio Idéal pour une enceinte 2 ou 3 voies

Scanspeak 18W/8531G00 Pair Excellent Condition.

THIS TWEETERS ARE VERY HIGH QUALITY HI-END, MADE FOR AVLON ACOUSTICS. These PAIR of tweeters extend beyond 40KHz with a very good frequency response and really heavy. The Norminal RMS is 120 WATTS on 8Ohms (check the technical SPL vs Freq. graph) According to sources, they were designed by Avlon Acoustic and they abundant it because it was alleged the company claimed it was too expensive and opted for a cheaper version. Just look at the size of the magnet, so big like a Hi-End midrange drive and they very heavy too. Over 1kg in weight. Compare it in size to the Scanspeak illuminator tweeters in the photos? take the chance to grab a bargain. I have come by a box and are in stock so contact me if you are interested on 07930498660 .

ScanSpeak Discovery Line 30W/0-00 12 Passive RadiatorAluminium Cone, Black AnodizedFiberglass/Paper Sandwich Dust Cap, Black CoatedNomex spiderLow damping rubber surroundAdjustable weight56mm peak to peak excursion (+/-28mm)Match this passive to the Scan-speak Discovery 30W/4558T subwoofer or the Peerless 835017 subwoofer. This will also work well with the older Peerless 830500 subwoofer. The 30W/4558T and the 30W/0-00 in a 2.5 cubic foot box should be 3dB down at 30Hz.

Naim Allae speakers with brand new 1:1 replacement Scanspeak D2008/851100 Tweeters fitted (matched pair) Includes original boxes, floor spikes, standoffs/pegs & Naim speaker cable (designed for use with Naim amplifiers) Would ideally sell as a set (with a bundle deal) - see my other Naim listings for NAC62 & NAP140 and CD5i.

NOS tweeter MISSION D19 per serie 7 (tipo SCANSPEAK DYNAUDIO PROAC). Tweeter MISSION D19 con cupola morbida da 19mm utilizzato su buona parte della famosa serie 7XX, quella che di fatto ha reso famoso il marchio Inglese. Entrambi i tweeter sono assolutamente originali e praticamente nuovi in quanto erano fondi di magazzino per ricambio (diametro flangia 94mm). Usati solo una volta su un diffusore Mission 760 per verificarne il perfetto funzionamento. Prezzo alla coppia.

THESE SPECIAL SCANSPEAK TWEETERS MADE EXCLUSIVE TO GamuT COMES WITH A T/S OR >>>>>>>THE TECHNICAL DATA SHEET.>>>>>>> These are GamuT RS3i tweeters, a scanspeak made, exclusively for the GamuT which were used in their 14,000.00GBP GamuT RS3i stand-mount speakers. The magnet used in assembling these tweeters are specifically super strong ; graded N55, even stronger than the ones used in the Scanspeak R2904/700009 tweeters. These tweeters can only be obtained from the GamuT for over 500.GBP and you must have a prove of receipt of the RS3I and the serial numbers of the speakers before it willbe sold to you, so take the chance to grab a bargain. I have come by a box and are in stock so contact me if you are interested on 07387119542.

ScanSpeak Discovery Line 30W/0-00 12 Passive RadiatorAluminium Cone, Black AnodizedFiberglass/Paper Sandwich Dust Cap, Black CoatedNomex spiderLow damping rubber surroundAdjustable weight56mm peak to peak excursion (+/-28mm)Match this passive to the Scan-speak Discovery 30W/4558T subwoofer or the Peerless 835017 subwoofer. This will also work well with the older Peerless 830500 subwoofer. The 30W/4558T and the 30W/0-00 in a 2.5 cubic foot box should be 3dB down at 30Hz.

Linn Ninka Floor Standing Speakers with Scanspeak Tweeters. Excellent working order although the cabinets do have a few marks (and which could probably be touched up) - and a small chip in the top right corner of one of the speakers. I have tried to highlight in the photos. I have replaced and upgraded the tweeters with the Scanspeak D2008/851200 from Falcon Acoustics Collection from Crouch End, N8

Scanspeak 22W/4534G00 4 Ohm Woofer - Discovery Range Speaker. 8 4 ohm, High output, excellent performance. From DIY project, excellent condition.

Scanspeak 22W/4534G00 4 Ohm Woofer - Discovery Range Speaker. 8 4 ohm, High output, excellent performance. From DIY project, excellent condition.

SCANSPEAK Tweeter from Wilson Audio oem parts. These were from a Wilson audio speaker, they are in great condition, and sound amazing, see measurments, perfectly flat from 3k to 15k, an incredible device, also they show close matching as you can see in the graph where ones curve is in red. Excellent état et fonctionnement comme en attestent les mesures, réponse excellente de 3k à 15k, c est un tweeter exceptionnel fabriqué par Scanspeak pour Wilson Audio Idéal pour une enceinte 2 ou 3 voies