DESCRIPTION:SANSUI SP-5500 4 way 6 speakers crossover Tested/Works #2 PLUG & PLAY Tested by audio all WorksBloken corner and missing knob cover Sold As is for parts vintage speakers.Its not how laugh it gets, instead is how good it sounds. UNIT HAS SOME SMUDGES, SCRATCHES, AND SCUFFS FROM PREVIOUS USE. PLEASE SEE ALL PHOTOS FOR COMPLETE DETAILS!! These are pictures of the actual item, please look carefully at the photos and judge the condition for yourself, color May very on picture quality. Contact UsIf youre in any way dissatisfied with your purchase, do not hesitate to contact us through MY MESSAGES. We will do our best to solve it for you. We are committed to ensuring that you are completely satisfied with every transaction.So Please DO contact us first to get a better solution before you would leave Negative or Neutral feedback.

DESCRIPTION:SANSUI SP-5500 4 way 6 speakers crossover Tested/Works #1 PLUG & PLAY Tested by audio all Works Sold As is for parts vintage speakers.Its not how laugh it gets, instead is how good it sounds. UNIT HAS SOME SMUDGES, SCRATCHES, AND SCUFFS FROM PREVIOUS USE. PLEASE SEE ALL PHOTOS FOR COMPLETE DETAILS!! These are pictures of the actual item, please look carefully at the photos and judge the condition for yourself, color May very on picture quality. Contact UsIf youre in any way dissatisfied with your purchase, do not hesitate to contact us through MY MESSAGES. We will do our best to solve it for you. We are committed to ensuring that you are completely satisfied with every transaction.So Please DO contact us first to get a better solution before you would leave Negative or Neutral feedback.

This Sansui CD-5A has been tested and works well. It can be used as a 2-way or 3-way crossover. I’m happy to take more pictures or answer any questions. Check my feedback and buy with confidence! Note: if you want shipping to AK or HI, there will be a shipping surcharge (amount depends on carrier). Message me for details.Note: this is the 100v model, you’ll want to use an adaptor (inexpensive and easy to find). If I get my asking price, I’ll include one.

DescriptionThe sound output operation is good. The condition is good with no serious scratches or stains. Please understand that there are scratches, small defects, and deterioration caused by age and use.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Item ConditionUsed:Good Condition. Important noticeWe guarantee all the displayed items are authentic, and there are no pirated or illegally copied items.Please feel reassured. The electric appliances handled in our shop are Japanese specifications. Note the difference in plug shape and voltage. ShippingStandard Shipping (Japan Post, Fedex, DHL)The package will arrive 5-14days after shipment. Notice:If there is a remote charge for your address, we will charge you for additional shipping cost USD25. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.If the cancellation is due to the buyer, we will charge a managed payment fee. Thank you for your understanding! Guaranteed!100% Guaranteed! My goal is to make your experience with me as stress free as possible.Items that are faulty beyond the description given on our auction site, please contact me. 100% customer satisfaction guaranteed. However, customers who abuse eBay feedback system and leave a complaint before contacting me are not eligible for a refund.

SANSUI CD-10 4Way Electronic Frequency Crossover Dividing Network Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. *The power supply voltage is AC 100V specification in Japan.Please be careful about the voltage in your country.If the power supply voltage is different, you will need a voltage transformer. Overview The filter circuit consists of an emitter follower circuit with two PNP-NPN low-noise transistors in all stages.In particular, the buffer amplifier in the input stage consists of four L/R circuits and is designed to take advantage of the original performance of the buffer amplifier, resulting in a high signal-to-noise ratio and low distortion.In addition, the ±2 power supply system allows the input/output circuits of each frequency selector stage to be at 0 V potential, so there is no click noise no matter which frequency selector is switched during use. The CD-10 supports up to a 4-way system to accommodate the element of using a wider bandwidth by adding a super tweeter or subwoofer to the 3-way system. In addition, six different frequency bandwidths can be divided by the mode selector on the back panel, from 2-way to 4-way, depending on the combination of the four divided bandwidths: low, mid-low, mid-high, and high. The crossover frequency can be selected from 60Hz to 600Hz for the low-mid range, from 300Hz to 3kHz for the low-mid to high range, and from 1.5kHz to 15kHz for the high-mid to high range.Furthermore, the crossover frequencies on the low and high frequency side of each divided band can be changed independently, allowing the overlap portion to be adjusted freely in addition to the usual -3dB crossover point. There are two cutoff slopes, sharp 18dB/oct and 12dB/oct, which can be switched at both ends of the low and high frequency side of each band to be crossed. The -3dB point of each cutoff slope is exactly the same, so that a characteristic cutoff frequency can be obtained under any conditions.The switch is located on the front panel, just like the frequency selector, so that the user can select the desired frequency while listening to the actual sound. The level of each band can be adjusted independently. The low frequency range is located on the back panel, and the mid-low, mid-high, and high frequency ranges are located on the front panel, making it possible to accommodate all differences in cone and horn type units, as well as differences in efficiency. Low frequency compensation is possible with the low booster.The knob is located on the rear panel and can compensate from 0 to 8 dB at 20 Hz in 10 steps. Furthermore, the turnover frequency can be switched between 60Hz and 100Hz to improve the sense of volume in the ultra-low frequency range, which tends to be lacking. Specifications Type: Channel dividerCircuit method : 2, 3, 4-way NF filterMaximum output: 8V (THD 0.1% or less)Rated output: 5VTotal harmonic distortion: 0.008% or less (at rated output)SN ratio: 90 dB or better (at rated output)Input impedance: 150k?Load Impedance: 10k?Cutoff frequency (±10%):F1: 60, 75, 95, 120, 150, 190,240, 300, 380, 480, 600HzF2: 300, 380, 480, 600, 750, 950,1.2k, 1.5k, 1.9k, 2.4k, 3kHzF3: 1.5k, 1.9k, 2.4k, 3k, 3.8k, 4.8k,6k, 7.5k, 9.5k, 12k, 15kHzCutoff characteristics: 18dB/oct, 12dB/oct (low-frequency side, high-frequency side)Low boost: 0 to +8dB(20Hz)Low boost turnover: 60Hz, 100HzPower consumption: 10WPower supply : AC100V, 50Hz/60HzDimensions: W 482 x H 88 x D 305mmWeight: 6.4kg Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SANSUI CD-10 4Way Electronic Frequency Crossover Dividing Network Japanese Description This is a Sansui CD-10 channel divider.This is a used item. It is in good condition with no serious scratches or stains.Please understand that there are some scratches, small defects, and deterioration caused by age and use.The sound output operation is good.The volume, switches, and rotary selector are in good condition.The terminals are also clean with no rust or stains.There are no accessories other than those shown in the photos. Shipping We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status. Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order. Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed. We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior. About Importers Obligation Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

SANSUI CD-10 4Way Electronic Frequency Crossover Dividing Network Vintage Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. For other appearances, please refer to the photo. *The power supply voltage is AC 100V specification in Japan.Please be careful about the voltage in your country.If the power supply voltage is different, you will need a voltage transformer. Overview The filter circuit consists of an emitter follower circuit with two PNP-NPN low-noise transistors in all stages.In particular, the buffer amplifier in the input stage consists of four L/R circuits and is designed to take advantage of the original performance of the buffer amplifier, resulting in a high signal-to-noise ratio and low distortion.In addition, the ±2 power supply system allows the input/output circuits of each frequency selector stage to be at 0 V potential, so there is no click noise no matter which frequency selector is switched during use. The CD-10 supports up to a 4-way system to accommodate the element of using a wider bandwidth by adding a super tweeter or subwoofer to the 3-way system. In addition, six different frequency bandwidths can be divided by the mode selector on the back panel, from 2-way to 4-way, depending on the combination of the four divided bandwidths: low, mid-low, mid-high, and high. The crossover frequency can be selected from 60Hz to 600Hz for the low-mid range, from 300Hz to 3kHz for the low-mid to high range, and from 1.5kHz to 15kHz for the high-mid to high range.Furthermore, the crossover frequencies on the low and high frequency side of each divided band can be changed independently, allowing the overlap portion to be adjusted freely in addition to the usual -3dB crossover point. There are two cutoff slopes, sharp 18dB/oct and 12dB/oct, which can be switched at both ends of the low and high frequency side of each band to be crossed. The -3dB point of each cutoff slope is exactly the same, so that a characteristic cutoff frequency can be obtained under any conditions.The switch is located on the front panel, just like the frequency selector, so that the user can select the desired frequency while listening to the actual sound. The level of each band can be adjusted independently. The low frequency range is located on the back panel, and the mid-low, mid-high, and high frequency ranges are located on the front panel, making it possible to accommodate all differences in cone and horn type units, as well as differences in efficiency. Low frequency compensation is possible with the low booster.The knob is located on the rear panel and can compensate from 0 to 8 dB at 20 Hz in 10 steps. Furthermore, the turnover frequency can be switched between 60Hz and 100Hz to improve the sense of volume in the ultra-low frequency range, which tends to be lacking. Specifications Type: Channel dividerCircuit method : 2, 3, 4-way NF filterMaximum output: 8V (THD 0.1% or less)Rated output: 5VTotal harmonic distortion: 0.008% or less (at rated output)SN ratio: 90 dB or better (at rated output)Input impedance: 150k?Load Impedance: 10k?Cutoff frequency (±10%):F1: 60, 75, 95, 120, 150, 190,240, 300, 380, 480, 600HzF2: 300, 380, 480, 600, 750, 950,1.2k, 1.5k, 1.9k, 2.4k, 3kHzF3: 1.5k, 1.9k, 2.4k, 3k, 3.8k, 4.8k,6k, 7.5k, 9.5k, 12k, 15kHzCutoff characteristics: 18dB/oct, 12dB/oct (low-frequency side, high-frequency side)Low boost: 0 to +8dB(20Hz)Low boost turnover: 60Hz, 100HzPower consumption: 10WPower supply : AC100V, 50Hz/60HzDimensions: W 482 x H 88 x D 305mmWeight: 6.4kg Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Item ConditionUsed:Good Condition. Important noticeWe guarantee all the displayed items are authentic, and there are no pirated or illegally copied items.Please feel reassured. The electric appliances handled in our shop are Japanese specifications. Note the difference in plug shape and voltage. ShippingStandard Shipping (Japan Post, Fedex, DHL)The package will arrive 5-14days after shipment. Notice:If there is a remote charge for your address, we will charge you for additional shipping cost USD25. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.If the cancellation is due to the buyer, we will charge a managed payment fee. Thank you for your understanding! Guaranteed!100% Guaranteed! My goal is to make your experience with me as stress free as possible.Items that are faulty beyond the description given on our auction site, please contact me. 100% customer satisfaction guaranteed. However, customers who abuse eBay feedback system and leave a complaint before contacting me are not eligible for a refund.

eine Blende ist ab, Kabel etwas verdrilltleicht vergilbt

DescriptionThe sound output operation is good. The condition is good with no serious scratches or stains. Please understand that there are scratches, small defects, and deterioration caused by age and use.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

SANSUI SS-20 2-Way Stereo Over-Ear Headphones. Sansui SS-20 Another two way design. Sansui made a lot ofnice stuff back in the late 70s - early 80s and even this low end headphone is very nice sounding considering the time period. Very different sounding than the Sixty; theyrealmost opposites despite sharing the same basic drive principle. The SS-20 is far faster and has more treble, and is actually a very detailed sounding headphone whereas the Sixty was average at best in that area.While a bit middy, they have good bass and impact as well as some sparkle up top. The imaging is far more precise than the Sixty, while the soundstage sounds just a little closed in.There is a slight resonance in the midrange but I find that it disappears after a bit of listening, much unlike the Audatron (which seemed to get worse and worse the more I used it). Very nice sounding headphones that can match andeven beat many modern cans. Specifications: Driver: 2-way Dynamic;Woofer: 70mm Paper cone,Tweeter: 50mm mylar dome Implementation: Closed; Unsealed baffle Impedance: 8 ohms Sensitivity: ~105dB/mW Earpad type: Circum-aural; vinyl Weight: 500g (without cable) Cable type: Coiled, singleentry Cable length: 0.5m

Zum Gebot steht ein alter Ende 70er Jahre alter, voll funktionsfähiger Sansui SS-10 Kopfhörer Mechanical 2 Way Impendance 8Ohm incl 2m Verlängerungskabel.Ohrmuscheln sowie der Bügel in feinem Leder überzogen. Keine sichtbaren Beschädigungen. Privatverkauf, keine garantie, Keine Rücknahme

SANSUI SS-20 2-Way Stereo Over-Ear Headphones Pre-owned . Condition is Used. Shipped with USPS Priority Mail.

*** I am trying to sell a few things to raise funds by the end of the month. Price reduced for a quick and guaranteed sale! *** Up for sale here is a SANSUI CD-5 Stereo Electronic 2-3 Way Crossover. It is a smaller version of CD-10 crossover. I purchased this a long time ago for a build that never happened and now that I am moving I decided to just sell it along with some of my other stereo project equipment. It has been sitting on my shelf in the basement for years. It is in excellent condition, however I have no way of testing it currently so I am selling it as is. It could probably use a servicing to get it up to spec again so I am pricing it accordingly. Whoever gets this is getting quite the deal. I am starting the auction at less than 1/2 the normal selling price for these. Good luck and happy bidding!

SANSUI SS-20 2-Way Stereo Over-Ear Headphones Pre-owned . Condition is Used. Shipped with USPS Priority Mail.

Sansui SS-20 8ohm 2 Way Stereo Headphones w/Cord In Original Package.

VINTAGE SANSUI SS-10 MECHANICAL TWO-WAY OVEREAR HEADPHONES CLEAN!.

These Sansui Headphones are very functional and sound good. Overall cosmetic condition is good however they are missing the nameplate on each earpiece. The overhead band and the cups that fit over the ear are in good shape. The ear pieces are a bit large and heavy for the ear as compared to a set of pioneer headphones I have. They do have individual cup volume adjustments Reason for selling- trying to de-clutter and I’ve decided to stick with the Pioneer ones. Thanks for looking.

Sansui SS-20 / 2 way Stereo Headphones Japan Original Box.

SANSUI SS-20 2-Way Stereo Over-Ear Headphones Pre-owned . Condition is Used. Shipped with USPS Priority Mail.

Zum Gebot steht ein alter Ende 70er Jahre alter, voll funktionsfähiger Sansui SS-10 Kopfhörer Mechanical 2 Way Impendance 8Ohm incl 2m Verlängerungskabel.Ohrmuscheln sowie der Bügel in feinem Leder überzogen. Keine sichtbaren Beschädigungen. Privatverkauf, keine garantie, Keine Rücknahme

Sansui SS-20 / 2 way Stereo Headphones Japan Original Box.

Zum Gebot steht ein alter Ende 70er Jahre alter, voll funktionsfähiger Sansui SS-10 Kopfhörer Mechanical 2 Way Impendance 8Ohm incl 2m Verlängerungskabel.Ohrmuscheln sowie der Bügel in feinem Leder überzogen. Keine sichtbaren Beschädigungen. Privatverkauf, keine garantie, Keine Rücknahme