SANSUI TA-500 DC Récepteur Stéréo Intégré 100 WRMS Vintage 1979 WORK Good Look Fonctionne 100% ORIGINAL PARFAIT avec RACK MOUNT inclus Sansui TA-500 Amplificateur tuner intégré CC (1979-80) Caractéristiques Plage de syntonisation : FM, MW Puissance de sortie : 50 watts par canal en 8ohms (stéréo) Réponse en fréquence : 10 Hz à 50 kHz Distorsion harmonique totale : 0,05 % Facteur damortissement : 40 Sensibilité dentrée : 2,5 mV (MM), 150 mV (ligne) Rapport signal sur bruit : 75 dB (MM), 95 dB (ligne) Séparation des canaux : 50 dB (MM), 50 dB (ligne) Sortie : 150 mV (ligne) Impédance de charge du haut-parleur : 8ohms (le minimum) Dimensions : 430 x 160 x 399 mm Poids : 10,9 kg Compatible avec : Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, méridien, ps audio, EAD, harman, jbl, genèse, thorens, kef, linn, fuite, marantz, revox, esb , infini, chario, naim, focal, yba, monrio, suis audio, ar, allison, câble monstre, shure, balayage, mers, plus bas, vinyle, plaque tournante, nos, tube, haut de gamme, intégré, soupape, vannes, sinto, cd, final, pré, dac, convertisseur, van den hul, câble, salut fi, salut fin, haut parleursSANSUI TA-500 DC Récepteur Stéréo Intégré 100 WRMS Vintage 1979 WORK Good Look Puissance de sortie : 50 watts par canal en 8ohms (stéréo) Impédance de charge du haut-parleur : 8ohms (le minimum) Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, méridien, ps audio, EAD, harman, jbl, genèse, thorens, kef, linn, fuite, marantz, revox, esb , infini, chario, naim, focal, yba, monrio, suis audio, ar, allison, câble monstre, shure, balayage, mers, plus bas, vinyle, plaque tournante, nos, tube, haut de gamme, intégré, soupape, vannes, sinto, cd, final, pré, dac, convertisseur, van den hul, câble, sal

Sansui TA-500 Dc Integrato Stereo Receiver 100 Wrms Vintage 1979 Work Good LookLa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci. Ricevitore stereo integrato SANSUI TA-500 DC 100 WRMS Vintage 1979 WORK Good Look Funzionante 100% ORIGINALE PERFETTO con RACK MOUNT incluso Sansui TA-500 Amplificatore sintonizzatore integrato CC (1979-80) specifiche Gamma di sintonizzazione: FM, MW Potenza di uscita: 50 watt per canale in 8ohm (stereo) Risposta in frequenza: da 10Hz a 50kHz Distorsione armonica totale: 0,05% Fattore di smorzamento: 40 Sensibilità di ingresso: 2,5 mV (MM), 150 mV (linea) Rapporto segnale/rumore: 75 dB (MM), 95 dB (linea) Separazione dei canali: 50 dB (MM), 50 dB (linea) Uscita: 150 mV (linea) Impedenza di carico dellaltoparlante: 8ohm (minimo) Dimensioni: 430 x 160 x 399 mm Peso: 10,9 kg Compatibile con : Krell, audio research, jack, aloia, levinson, quad, sonic frontiers, audio notes, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, stage, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, meridian, ps audio, EAD, harman, jbl , genesis, thorens, kef, linn, leak, marantz, revox, esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integrated, valvola, valvole, sinto, cd, finale, pre, dac, convertitore, van den hul, cavo, hi-fi, hi end, altoparlantiRicevitore stereo integrato SANSUI TA-500 DC 100 WRMS Vintage 1979 WORK Good Look Funzionante 100% ORIGINALE PERFETTO con RACK MOUNT incluso Potenza di uscita: 50 watt per canale in 8ohm (stereo) Krell, audio research, jack, aloia, levinson, quad, sonic frontiers, audio notes, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, stage, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, meridian, ps audio, EAD, harman, jbl , genesis, thorens, kef, linn, leak, marantz, revox, esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integrated, valvola, valvole, sinto, cd, finale, pre, dac, convertitore, van den hul, cavo, hi-fi, hi end, altop Artículo modificado No Garantía del fabricante Sin garantía EAN No aplicable Color Negro Marca Sansui Tipo de unidad Unidad País/Región de fabricación Japón Cantidad de unidades 1 Entradas de audio Estéreo RCA Número de canales 2 Salida de audio Banana Jack Modelo TA 500

Sansui TA-500 Dc Intégré Stéréo Récepteur 100 Wrms Vintage 1979 Work Good LookCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. SANSUI TA-500 DC Récepteur Stéréo Intégré 100 WRMS Vintage 1979 WORK Good Look Fonctionne 100% ORIGINAL PARFAIT avec RACK MOUNT inclus Sansui TA-500 Amplificateur tuner intégré CC (1979-80) Caractéristiques Plage de syntonisation : FM, MW Puissance de sortie : 50 watts par canal en 8ohms (stéréo) Réponse en fréquence : 10 Hz à 50 kHz Distorsion harmonique totale : 0,05 % Facteur damortissement : 40 Sensibilité dentrée : 2,5 mV (MM), 150 mV (ligne) Rapport signal sur bruit : 75 dB (MM), 95 dB (ligne) Séparation des canaux : 50 dB (MM), 50 dB (ligne) Sortie : 150 mV (ligne) Impédance de charge du haut-parleur : 8ohms (le minimum) Dimensions : 430 x 160 x 399 mm Poids : 10,9 kg Compatible avec : Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, méridien, ps audio, EAD, harman, jbl, genèse, thorens, kef, linn, fuite, marantz, revox, esb , infini, chario, naim, focal, yba, monrio, suis audio, ar, allison, câble monstre, shure, balayage, mers, plus bas, vinyle, plaque tournante, nos, tube, haut de gamme, intégré, soupape, vannes, sinto, cd, final, pré, dac, convertisseur, van den hul, câble, salut fi, salut fin, haut parleursSANSUI TA-500 DC Récepteur Stéréo Intégré 100 WRMS Vintage 1979 WORK Good Look Puissance de sortie : 50 watts par canal en 8ohms (stéréo) Impédance de charge du haut-parleur : 8ohms (le minimum) Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, méridien, ps audio, EAD, harman, jbl, genèse, thorens, kef, linn, fuite, marantz, revox, esb , infini, chario, naim, focal, yba, monrio, suis audio, ar, allison, câble monstre, shure, balayage, mers, plus bas, vinyle, plaque tournante, nos, tube, haut de gamme, intégré, soupape, vannes, sinto, cd, final, pré, dac, convertisseur, van den hul, câble, sal Artículo modificado No Garantía del fabricante Sin garantía EAN No aplicable Color Negro Marca Sansui Tipo de unidad Unidad País/Región de fabricación Japón Cantidad de unidades 1 Entradas de audio Estéreo RCA Número de canales 2 Salida de audio Banana Jack Modelo TA 500

Sansui Au 11000A Integrated Stereo Verstärker 2 X 110 Wrms Vintag 1977 Good Look Die Beschreibung dieses Artikels erfolgte durch automatische Übersetzung. Bei anstehenden Fragen, wenden Sie sich bitte an uns. SANSUI AU 11000A SEHR SELTENER integrierter Stereoverstärker 110 + 110 Watt RMS Vintage 1975, komplett renoviert, GUTE AUSSEHEN Original aus Japan, komplett restauriert und 100 % tadellos funktionsfähig – Betrieb mit 100/120/220/240 Volt. Sansui AU-11000A Integrierter Stereoverstärker (1977-79) Beschreibung Erstklassiger integrierter Verstärker, der satte 110 Watt pro Kanal über einen weiten Frequenzbereich liefert. Der AU-11000A verfügt über umfassende Bedienelemente, um die musikalischen Fähigkeiten des Verstärkers optimal zu nutzen. Spezifikationen Ausgangsleistung: 110 Watt pro Kanal in 8? (Stereo) Frequenzgang: 5 Hz bis 80 kHz Gesamte harmonische Verzerrung: 0,05 % Dämpfungsfaktor: 70 Eingangsempfindlichkeit: 2 mV (MM), 150 mV ( DIN ), 150 mV (Leitung) Signal-Rausch-Verhältnis: 75 dB (MM), 90 dB (Leitung) Kanaltrennung: 60 dB (MM), 60 dB (Line) Ausgang: 150 mV (Line), 30 mV ( DIN ), 1 V (Vorverstärkerausgang) Lautsprecherlastimpedanz: 4? bis 8? Abmessungen: 460 x 176 x 407 mm Gewicht: 19,2 kg Jahr: 1977 Bei den Modellen Sansui AU-11000 und AU-11000A handelt es sich um hochwertige Verstärker aus der AU-Serie von Sansui aus den 1970er Jahren, die jedoch einige technische und gestalterische Unterschiede aufweisen. 1. Technische Unterschiede •Schaltungsdesign: Die AU-11000A-Version weist im Vergleich zum ursprünglichen AU-11000 geringfügige Änderungen in der internen Schaltung auf. Diese Anpassungen wurden vorgenommen, um die thermische Stabilität zu verbessern und Verzerrungen zu reduzieren, um einen saubereren und gleichmäßigeren Klang zu erzielen. •Stromversorgung: Der AU-11000A wurde angepasst, um die Effizienz der Stromversorgung zu verbessern und eine stabilere Leistung bei wechselnden Lasten zu ermöglichen. 2. Leistung und Sound •Klangqualität: Obwohl beide Modelle eine hervorragende Klangqualität bieten, behaupten einige Enthusiasten und Experten, dass der AU-11000A aufgrund seiner Schaltungsverbesserungen und geringeren Verzerrungen einen etwas feineren Klang hat. Der Unterschied kann jedoch subtil sein und hängt vom Zuhörer ab. •Leistung: Beide Modelle haben die gleiche Nennleistung (110 W pro Kanal), der AU-11000A liefert jedoch möglicherweise eine etwas effizientere Leistung. 3. Ästhetische Unterschiede •Frontplatte und Bedienelemente: Äußerlich sind die Änderungen minimal. Beide Modelle behalten den klassischen Stil von Sansui bei, mit einer Aluminiumfrontplatte und robusten Knöpfen. In einigen Märkten wies der AU-11000A jedoch geringfügige Unterschiede in der Beschriftung oder Verarbeitung auf. 4. Verfügbarkeit und Sammlerwert •Verfügbarkeit: Der AU-11000 wurde zuerst veröffentlicht und bald durch den AU-11000A ersetzt. Die „A“-Version ist weniger verbreitet und kann aufgrund ihrer geringfügigen Verbesserungen für Sammler als wertvoller angesehen werden. •Sammlerwert: Beide Modelle gelten als Sammlerstücke, der AU-11000A kann jedoch aufgrund seiner Seltenheit und technischen Verbesserungen auf dem Vintage-Audiomarkt höhere Preise erzielen. Zusammenfassend lässt sich sagen, dass der Sansui AU-11000A eine leicht verbesserte Version des AU-11000 ist, mit technischen Änderungen, die seine Leistung und seinen Klang optimieren. Obwohl die Unterschiede geringfügig sind, wird die A-Version von einigen wegen ihrer zusätzlichen Raffinesse bevorzugt. SPANISCH: Die Sansui AU-11000 und AU-11000A sind hochwertige Verstärker der Sansui AU-Serie aus den 1970er Jahren, weisen jedoch einige technische und gestalterische Unterschiede auf. 1. Technische Unterschiede •Schaltungsdesign: Die AU-11000A-Version weist im Vergleich zum ursprünglichen AU-11000 geringfügige Änderungen an der internen Schaltung auf. Diese Modifikationen wurden vorgenommen, um die thermische Stabilität zu verbessern und Verzerrungen zu reduzieren, um einen saubereren und gleichmäßigeren Klang zu erzielen. •Stromversorgung: Der AU-11000A wurde optimiert, um die Effizienz der Stromversorgung zu verbessern und eine stabilere Leistung bei wechselnden Lasten zu ermöglichen. 2. Leistung und Klang •Klangqualität: Obwohl beide Modelle eine hervorragende Klangqualität bieten, behaupten einige Enthusiasten und Experten, dass der AU-11000A dank seiner Schaltungsverbesserungen und geringeren Verzerrungen einen etwas feineren Klang hat. Der Unterschied kann jedoch geringfügig sein und hängt stark vom Ohr des jeweiligen Benutzers ab. •Leistung: Die Nennleistung beider Modelle ist gleich (110 W pro Kanal), der AU-11000A bietet jedoch möglicherweise eine etwas effizientere Leistung. 3. Ästhetische Unterschiede •Frontplatte und Bedienelemente: Was das äußere Design betrifft, sind die Änderungen minimal. Beide Modelle behalten das gleiche klassische Sansui-Design mit einer Aluminiumfrontplatte und stabilen Knöpfen bei. In einigen Märkten wies der AU-11000A jedoch leicht abweichende Details bei der Beschriftung oder Verarbeitung auf. 4. Verfügbarkeit und Sammelwert •Verfügbarkeit: Der AU-11000 wurde zuerst veröffentlicht und kurz darauf durch den AU-11000A ersetzt. Version „A“ ist weniger verbreitet und kann aufgrund der geringfügigen Verbesserungen für Sammler als wertvoller angesehen werden. •Sammlerwert: Beide Modelle gelten als Sammlerstücke, aber die AU-11000A-Version kann auf dem Markt für Vintage-Audiogeräte aufgrund ihrer geringeren Verfügbarkeit und technischen Verbesserungen höhere Preise erzielen. Kurz gesagt, der Sansui AU-11000A ist eine leicht verbesserte Version des AU-11000 mit technischen Änderungen, die seine Leistung und seinen Klang optimieren. Obwohl die Unterschiede geringfügig sind, wird die A-Version von einigen wegen ihrer zusätzlichen Raffinesse bevorzugt.•Schaltungsdesign: Die AU-11000A-Version weist im Vergleich zum ursprünglichen AU-11000 geringfügige Änderungen an der internen Schaltung auf. Diese Modifikationen wurden vorgenommen, um die thermische Stabilität zu verbessern und Verzerrungen zu reduzieren, um einen saubereren und gleichmäßigeren Klang zu erzielen. •Klangqualität: Obwohl beide Modelle eine hervorragende Klangqualität bieten, behaupten einige Enthusiasten und Experten, dass der AU-11000A dank seiner Schaltungsverbesserungen und geringeren Verzerrungen einen etwas feineren Klang hat. Der Unterschied kann jedoch geringfügig sein und hängt stark vom Ohr des jeweiligen Benutzers ab. •Frontplatte und Bedienelemente: Was das äußere Design betrifft, sind die Änderungen minimal. Beide Modelle behalten das gleiche klassische Sansui Garantía del fabricante Sin garantía Salidas de audio Banana Jack Potencia RMS 2 X 110 Watts RMS Año de fabricación 1977-1979 Color Negro Número de salidas 4 Entradas de audio Estéreo RCA Número de entradas 7 Cantidad de unidades 1 Producto compatible Similar Al Model AU-11000 Tipo Amplificador integrado Marca Sansui Modelo AU-11000A Tipo de unidad Unidad Potencia 2 X 110 Watts RMS Clase de amplificador AB Características Término análogo Características Very RARE Model, Very Dificult To Guet Número de canales 2 País/Región de fabricación Japón EAN No aplicable

Sansui Au 11000A Integrated Stereo Amplifier 2 X 110 Wrms Vintage 1977 Good Look The description of this item has been automatically translated. If you have any questions, please feel free to contact us. SANSUI AU 11000A VERY RARE Integrated Stereo Amplifier 110 + 110 Watts RMS Vintage 1975 All Refurbished GOOD LOOK Original from Japan, it is completely restored and works perfectly at 100% - Work on 100/120/220/240 volts. Sansui AU-11000A Integrated Stereo Amplifier (1977-79) Description Top of the line integrated amplifier delivering a solid 110 watts per channel over a wide frequency range. The AU-11000A has comprehensive controls to make best use of the amplifiers musical capability. Specifications Power output: 110 watts per channel into 8? (stereo) Frequency response: 5Hz to 80kHz Total harmonic distortion: 0.05% Damping factor: 70 Input sensitivity: 2mV (MM), 150mV ( din ), 150mV (line) Signal to noise ratio: 75dB (MM), 90dB (line) Channel separation: 60dB (MM), 60dB (line) Output: 150mV (line), 30mV ( din ), 1V (Pre out) Speaker load impedance: 4? to 8? Dimensions: 460 x 176 x 407mm Weight: 19.2kg Year: 1977 The Sansui AU-11000 and AU-11000A models are high-quality amplifiers from Sansuis AU series from the 1970s, but they have some technical and design differences. 1. Technical Differences •Circuit Design: The AU-11000A version has slight modifications in its internal circuitry compared to the original AU-11000. These adjustments were made to improve thermal stability and reduce distortion, aiming for a cleaner and more consistent sound. •Power Supply: The AU-11000A was adjusted to improve power supply efficiency, allowing for more stable performance under variable loads. 2. Performance and Sound •Sound Quality: Although both models offer excellent sound quality, some enthusiasts and experts claim that the AU-11000A has a slightly more refined sound due to its circuit improvements and reduced distortion. However, the difference can be subtle and depends on the listener. •Power: Both models have the same nominal power (110 W per channel), but the AU-11000A may deliver slightly more efficient performance. 3. Aesthetic Differences •Front Panel and Controls: Externally, changes are minimal. Both models maintain Sansuis classic style, with an aluminum front panel and robust knobs. However, in some markets, the AU-11000A had slight differences in labeling or finish. 4. Availability and Collector Value •Availability: The AU-11000 was released first and was soon replaced by the AU-11000A. The “A” version is less common and may be considered more valuable to collectors due to its slight improvements. •Collector Value: Both models are considered collectible, but the AU-11000A can reach higher prices in the vintage audio market due to its rarity and technical enhancements. In summary, the Sansui AU-11000A is a slightly improved version of the AU-11000, with technical changes that optimize its performance and sound. Although the differences are subtle, the A version is preferred by some for its added refinement. SPANISH: The Sansui AU-11000 and AU-11000A are high-quality Sansui AU series amplifiers from the 1970s, but they have some technical and design differences. 1. Technical differences •Circuit design: The AU-11000A version has slight modifications to its internal circuitry compared to the original AU-11000. These modifications were made to improve thermal stability and reduce distortion, seeking a cleaner and more consistent sound. •Power supply: The AU-11000A was tuned to improve power supply efficiency, allowing for more stable performance under varying loads. 2. Performance and sound •Sound quality: Although both models offer excellent sound quality, some enthusiasts and experts maintain that the AU-11000A has a somewhat more refined sound, thanks to its circuit improvements and lower distortion. However, the difference can be subtle and depends a lot on the ear of each user. •Power: The power rating of both models is the same (110W per channel), but the AU-11000A may offer slightly more efficient performance. 3. Aesthetic differences •Front panel and controls: In terms of external design, the changes are minimal. Both models maintain the same classic Sansui styling with an aluminum front panel and sturdy knobs. However, in some markets, the AU-11000A had slightly different details in labeling or finishing. 4. Availability and collection value •Availability: The AU-11000 was released first, and was replaced shortly after by the AU-11000A. Version “A” is less common and may be considered more valuable to collectors due to its slight improvements. •Collector Value: Both models are considered collectors items, but the AU-11000A version can command higher prices in the vintage audio equipment market due to its lower availability and technical improvements. In short, the Sansui AU-11000A is a slightly improved version of the AU-11000, with technical changes that optimize its performance and sound. Although the differences are subtle, the A version is preferred by some for its added refinement.•Sound Quality: Although both models offer excellent sound quality, some enthusiasts and experts claim that the AU-11000A has a slightly more refined sound due to its circuit improvements and reduced distortion. However, the difference can be subtle and depends on the listener. •Sound quality: Although both models offer excellent sound quality, some enthusiasts and experts maintain that the AU-11000A has a somewhat more refined sound, thanks to its circuit improvements and lower distortion. However, the difference can be subtle and depends a lot on the ear of each user. •Front panel and controls: In terms of external design, the changes are minimal. Both models maintain the same classic Sansui styling with an aluminum front panel and sturdy knobs. However, in some markets, the AU-11000A ha Garantía del fabricante Sin garantía Salidas de audio Banana Jack Potencia RMS 2 X 110 Watts RMS Año de fabricación 1977-1979 Color Negro Número de salidas 4 Entradas de audio Estéreo RCA Número de entradas 7 Cantidad de unidades 1 Producto compatible Similar Al Model AU-11000 Tipo Amplificador integrado Marca Sansui Modelo AU-11000A Tipo de unidad Unidad Potencia 2 X 110 Watts RMS Clase de amplificador AB Características Término análogo Características Very RARE Model, Very Dificult To Guet Número de canales 2 País/Región de fabricación Japón EAN No aplicable

The Sansui 9090DB AM/FM stereo receiver DUAL DECK 100k Ohms TONE CONTROL POT as pictured. Its pulled, in good condition. This item is intended for professional (service tech / skilled audio hobbyist), and it is final (NO RETURN or REFUND) Please buy or bid accordingly. Thanks for looking.

Sansui AU-7700 Integrato Stereo Amplifier 108 Watts RMS Vintage 1974 Good LookLa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci.SANSUI AU-7700 Amplificatore stereo integrato 108 Watt RMS Vintage 1974 BellaspettoSansui AU-7700Amplificatore stereo integrato (1974-76)descrizioneIl prototipo dellAU-7700 di Sansui ha creato molto entusiasmo nella nostra divisione di ingegneria audio.Qui cera un amplificatore integrato di potenza moderatamente grande, distorsione molto bassa, sofisticati controlli di tono e capacità di gestione della sorgente e molto altro ancora.Le caratteristiche dellAU-7700 includono terminali per il collegamento di un massimo di due coppie di altoparlanti, circuiti per la gestione di due registratori a nastro, terminali per il collegamento di un massimo di due giradischi, carico del pick-up selezionabile, controllo versatile della qualità tonale e interruttori del filtro alto e basso.specifichePotenza di uscita: 54 watt per canale su 8? (stereo)Risposta in frequenza: da 10Hz a 50kHzDistorsione armonica totale: 0,1%Fattore di smorzamento: 30Sensibilità di ingresso: 2,5 mV (MM), 100 mV ( DIN ), 100 mV (linea)Rapporto segnale/rumore: 75dB (MM), 85dB ( DIN ), 85dB (linea)Separazione dei canali: 75 dB (MM), 85 dB (linea)Uscita: 100 mV (linea), 30 mV ( DIN ), 0,8 V (uscita pre)Impedenza di carico dellaltoparlante: 8? (minimo)Semiconduttori: 57 transistor, 22 diodi, 3 diodi zener, 1 LEDDimensioni: 434 x 130 x 315 mmPeso: 12,3 kgAnno: 1975SANSUI AU-7700 Amplificatore stereo integrato 108 Watt RMS Vintage 1974 Bellaspetto Il prototipo dellAU-7700 di Sansui ha creato molto entusiasmo nella nostra divisione di ingegneria audio. Qui cera un amplificatore integrato di potenza moderatamente grande, distorsione molto bassa, sofisticati controlli di tono e capacità di gestione della sorgente e molto altro ancora. Le caratteristiche dellAU-7700 includono terminali per il collegamento di un massimo di due coppie di altoparlanti, circuiti per la gestione di due registratori a nastro, terminali per il collegamento di un massimo di due giradischi, carico del pick-up selezionabile, controllo versatile della qualità tonale e interruttori del filtro alto e basso. Sensibilità di ingresso: 2,5 mV (MM), 100 mV ( DIN ), 100 mV (linea) Rapp Número de canales 2 Garantía del fabricante Sin garantía Tipo Amplificador integrado Potencia RMS 2 X 54 Watts RMS EAN No aplicable Marca Sansui Entradas de audio Estéreo RCA Año de fabricación 1970-1979 País/Región de fabricación Japón Cantidad de unidades 1 Tipo de unidad Unidad Salidas de audio Banana Jack Modelo AU-7700 Potencia 2 X 54 Watts RMS

Sansui AU-999 Intégré Stéréo Amplificateur 100 Wrms Vintage 1972 Work Good LookCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. SANSUI AU-999 Amplificateur Stéréo Intégré 100 WRMS Vintage 1972 TRAVAIL BON LOOK Tous 100% DORIGINE Du MARCHÉ JAPONAIS, remis à neuf, FONCTIONNEMENT parfait sur 220/240 volts avec transformateur externe inclus GRATUITEMENT ! Sansui AU-999 Amplificateur stéréo intégré à semi-conducteurs (1970-72) Description LAU-999 est lamplificateur de contrôle professionnel le plus avancé jamais fabriqué par Sansui. Conçu spécifiquement pour laudiophile ardent, il présente les panneaux noirs ternes raffinés communs à tous les amplificateurs de contrôle professionnels de la série AU de Sansui. La section préamplificateur est constituée de transistors en silicium PNP à faible bruit soigneusement sélectionnés, tandis que la section amplificateur de puissance comprend des circuits à couplage direct spécialement développés pour améliorer la qualité tonale. Ensemble, ils permettent à lAU-999 de fournir une puissance de sortie musicale de 180 watts (4 ohms) avec une qualité sonore sans précédent. LAU-999 est richement doté de circuits accessoires. Ceux-ci comprennent un circuit sélecteur de tonalité, une forme améliorée du circuit de contrôle de tonalité triple qui offre un choix dans la sélection des fréquences critiques de contrôle de tonalité; un sélecteur de haut-parleurs qui permet de connecter trois ensembles de systèmes de haut-parleurs ; un commutateur de contrôle déquilibre qui simplifie le travail dajustement pour un équilibre optimal des volumes sonores des canaux droit et gauche ; des installations pour connecter deux phonographes et deux magnétophones, et un circuit de réimpression de bande. Des dispositions spéciales ont également été prises pour permettre à lamplificateur dêtre intégré dans un système stéréo de croisement électronique et permettre de comparer un tel système avec une configuration stéréo standard. Caractéristiques Puissance de sortie : 50 watts par canal en 8ohms (stéréo) Réponse en fréquence : 20 Hz à 70 kHz Distorsion harmonique totale : 0,4 % Facteur damortissement : 45 Sensibilité dentrée : 3 mV (micro), 2 mV (MM), 200 mV ( DIN ), 200 mV (ligne) Rapport signal sur bruit : 80 dB (micro), 80 dB (MM), 85 dB (ligne) Sortie : 200 mV (ligne), 30 mV ( DIN ) Impédance de charge du haut-parleur : 4ohms à 16ohms Semi-conducteurs : 41 x transistors, 16 x diodes, 2 x triacs Dimensions : 18-1/8 x 6-1/8 x 12-1/2 pouces Poids : 38,5 lb ATTENTION : Article vintage avec plus de 40 ans dâge, regardez les photos agrandies car larticle a quelques marques dutilisation et le passage du temps, NOUS NACCEPTERONS PAS LES RÉCLAMATIONS OU DEMANDES DE RETOURS, Veuillez regarder attentivement avant de finaliser lachat Compatible avec : Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, méridien, ps audio, EAD, harman, jbl, genèse, thorens, kef, linn, fuite, marantz, revox, esb , infini, chario, naim, focal, yba, monrio, suis audio, ar, allison, câble monstre, shure, balayage, mers, plus bas, vinyle, plaque tournante, nos, tube, haut de gamme, intégré, soupape, vannes, sinto, cd, final, pré, dac, convertisseur, van den hul, câble, salut fi, salut fin, haut parleursCeux-ci comprennent un circuit sélecteur de tonalité, une forme améliorée du circuit de contrôle de tonalité triple qui offre un choix dans la sélection des fréquences critiques de contrôle de tonalité; un sélecteur de haut-parleurs qui permet de connecter trois ensembles de systèmes de haut-parleurs ; un commutateur de contrôle déquilibre qui simplifie le travail dajustement pour un équilibre optimal des volumes sonores des canaux droit et gauche ; des installations pour connecter deux phonographes et deux magnétophones, et un circuit de réimpression de bande. Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, Número de entradas 8 Número de canales 2 Garantía del fabricante Sin garantía Tipo Amplificador integrado Potencia RMS 2 X 50 Watts RMS Color Negro EAN No aplicable Marca Sansui Entradas de audio Estéreo RCA Año de fabricación 1970-1972 País/Región de fabricación Japón Cantidad de unidades 1 Tipo de unidad Unidad Salidas de audio Banana Jack Modelo AU-999 Número de salidas 4 Características Término análogo Potencia 50 + 50 Watts RMS

SANSUI AU-999 Integrated Stereo Amplifier 100 WRMS Vintage 1972 WORK GOOD LOOK All 100% ORIGINAL From JAPANESE MARKET, Refurbished, WORKING Perfect on 220/240 volts with external transformer included for FREE! Sansui AU-999 Solid State Integrated Stereo Amplifier (1970-72) Description The AU-999 is the most advanced professional control amplifier ever manufactured by Sansui. Designed specifically for the ardent audiophile, it features the refined dull black panels common to all AU series professional control amplifiers from Sansui. The pre-amplifier section is constructed of carefully selected low-noise PNP silicon transistors, while the power amplifier section features direct-coupled circuits specially developed with the improvement of tonal quality in mind. Together, they allow the AU-999 to deliver a full 180 watts (4 ohms) in music power output with unprecedented tone quality. The AU-999 is lavishly endowed with accessory circuits. These include a tone selector circuit, an improved form of the triple tone control circuit that offers a choice in selecting the critical frequencies of tone control; a speaker selector which permits connecting three sets of speaker systems; a balance check switch which simplifies the job of adjusting for optimum balance of the right and left channel sound volumes; facilities to connect two phonographs and two tape decks, and a tape reprint circuit. Special provisions have also been made to permit the amplifier to be built up into an electronic crossover stereo system and permit comparing such a system with a standard stereo set-up. specifications Power output: 50 watts per channel into 8ohms (stereo) Frequency response: 20Hz to 70kHz Total harmonic distortion: 0.4% Damping factor: 45 Input sensitivity: 3mV (mic), 2mV (MM), 200mV ( din ), 200mV (line) Signal to noise ratio: 80dB (mic), 80dB (MM), 85dB (line) Output: 200mV (line), 30mV ( din ) Speaker load impedance: 4ohms to 16ohms Semiconductors: 41 x transistors, 16 x diodes, 2 x triacs Dimensions: 18-1/8 x 6-1/8 x 12-1/2 inches Weight: 38.5lbs ATTENTION: Vintage article with more than 40 years of age, look at the enlarged photos since the article has some marks of use and the passage of time, WE WILL NOT ACCEPT CLAIMS OR REQUESTS FOR RETURNS, Please look carefully before finalizing the purchase Compatible with : Krell, audio research, jack, aloia, levinson, quad, sonic frontiers, audio notes, fostex, jeff rowland, PIONEER , tannoy, accuphase, rotel, TECHNICSsony , kenwood, klipsch, sansui, stage, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, meridian, ps audio, EAD, harman, jbl , genesis, thorens, kef, linn, leak, marantz, revox, esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integrated, valve, valves, sinto, cd, final, pre, dac, converter, van den hul, cable, hi-fi, hi end, speakersThese include a tone selector circuit, an improved form of the triple tone control circuit that offers a choice in selecting the critical frequencies of tone control; a speaker selector which permits connecting three sets of speaker systems; a balance check switch which simplifies the job of adjusting for optimum balance of the right and left channel sound volumes; facilities to connect two phonographs and two tape decks, and a tape reprint circuit. Krell, audio research, jack, aloia, levinson, quad, sonic frontiers, audio notes, fostex, jeff rowland, PIONEER , tannoy, accuphase, rotel, TECHNICSsony , kenwood, klipsch, sansui, stage, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, meridian, ps audio, EAD, harman, jbl , genesis, thorens, kef, linn, leak, marantz, revox, esb , inf

SANSUI AU-999 Amplificateur Stéréo Intégré 100 WRMS Vintage 1972 TRAVAIL BON LOOK Tous 100% DORIGINE Du MARCHÉ JAPONAIS, remis à neuf, FONCTIONNEMENT parfait sur 220/240 volts avec transformateur externe inclus GRATUITEMENT ! Sansui AU-999 Amplificateur stéréo intégré à semi-conducteurs (1970-72) Description LAU-999 est lamplificateur de contrôle professionnel le plus avancé jamais fabriqué par Sansui. Conçu spécifiquement pour laudiophile ardent, il présente les panneaux noirs ternes raffinés communs à tous les amplificateurs de contrôle professionnels de la série AU de Sansui. La section préamplificateur est constituée de transistors en silicium PNP à faible bruit soigneusement sélectionnés, tandis que la section amplificateur de puissance comprend des circuits à couplage direct spécialement développés pour améliorer la qualité tonale. Ensemble, ils permettent à lAU-999 de fournir une puissance de sortie musicale de 180 watts (4 ohms) avec une qualité sonore sans précédent. LAU-999 est richement doté de circuits accessoires. Ceux-ci comprennent un circuit sélecteur de tonalité, une forme améliorée du circuit de contrôle de tonalité triple qui offre un choix dans la sélection des fréquences critiques de contrôle de tonalité; un sélecteur de haut-parleurs qui permet de connecter trois ensembles de systèmes de haut-parleurs ; un commutateur de contrôle déquilibre qui simplifie le travail dajustement pour un équilibre optimal des volumes sonores des canaux droit et gauche ; des installations pour connecter deux phonographes et deux magnétophones, et un circuit de réimpression de bande. Des dispositions spéciales ont également été prises pour permettre à lamplificateur dêtre intégré dans un système stéréo de croisement électronique et permettre de comparer un tel système avec une configuration stéréo standard. Caractéristiques Puissance de sortie : 50 watts par canal en 8ohms (stéréo) Réponse en fréquence : 20 Hz à 70 kHz Distorsion harmonique totale : 0,4 % Facteur damortissement : 45 Sensibilité dentrée : 3 mV (micro), 2 mV (MM), 200 mV ( DIN ), 200 mV (ligne) Rapport signal sur bruit : 80 dB (micro), 80 dB (MM), 85 dB (ligne) Sortie : 200 mV (ligne), 30 mV ( DIN ) Impédance de charge du haut-parleur : 4ohms à 16ohms Semi-conducteurs : 41 x transistors, 16 x diodes, 2 x triacs Dimensions : 18-1/8 x 6-1/8 x 12-1/2 pouces Poids : 38,5 lb ATTENTION : Article vintage avec plus de 40 ans dâge, regardez les photos agrandies car larticle a quelques marques dutilisation et le passage du temps, NOUS NACCEPTERONS PAS LES RÉCLAMATIONS OU DEMANDES DE RETOURS, Veuillez regarder attentivement avant de finaliser lachat Compatible avec : Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, méridien, ps audio, EAD, harman, jbl, genèse, thorens, kef, linn, fuite, marantz, revox, esb , infini, chario, naim, focal, yba, monrio, suis audio, ar, allison, câble monstre, shure, balayage, mers, plus bas, vinyle, plaque tournante, nos, tube, haut de gamme, intégré, soupape, vannes, sinto, cd, final, pré, dac, convertisseur, van den hul, câble, salut fi, salut fin, haut parleursCeux-ci comprennent un circuit sélecteur de tonalité, une forme améliorée du circuit de contrôle de tonalité triple qui offre un choix dans la sélection des fréquences critiques de contrôle de tonalité; un sélecteur de haut-parleurs qui permet de connecter trois ensembles de systèmes de haut-parleurs ; un commutateur de contrôle déquilibre qui simplifie le travail dajustement pour un équilibre optimal des volumes sonores des canaux droit et gauche ; des installations pour connecter deux phonographes et deux magnétophones, et un circuit de réimpression de bande. Krell, recherche audio, jack, aloia, levinson, quad, frontières sonores, notes audio, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, étape, mcintosh, luxman, bose, altec, cerwin,

Sansui AU-999 Integrato Stereo Amplifier 100 Wrms Vintage 1972 Work Good LookLa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci. SANSUI AU-999 Amplificatore stereo integrato 100 WRMS Vintage 1972 FUNZIONA BENE ASPETTO Tutto 100% ORIGINALE Dal MERCATO GIAPPONESE, Ricondizionato, FUNZIONANTE Perfetto a 220/240 volt con trasformatore esterno incluso in OMAGGIO! Sansui AU-999 Amplificatore stereo integrato a stato solido (1970-72) descrizione LAU-999 è lamplificatore di controllo professionale più avanzato mai prodotto da Sansui. Progettato specificamente per lappassionato audiofilo, presenta i raffinati pannelli neri opachi comuni a tutti gli amplificatori di controllo professionali della serie AU di Sansui. La sezione del preamplificatore è costruita con transistor al silicio PNP a basso rumore accuratamente selezionati, mentre la sezione dellamplificatore di potenza presenta circuiti ad accoppiamento diretto sviluppati appositamente per il miglioramento della qualità tonale. Insieme, consentono allAU-999 di fornire ben 180 watt (4 ohm) di potenza musicale in uscita con una qualità del suono senza precedenti. LAU-999 è riccamente dotato di circuiti accessori. Questi includono un circuito di selezione del tono, una forma migliorata del circuito di controllo del tono triplo che offre una scelta nella selezione delle frequenze critiche del controllo del tono; un selettore di altoparlanti che consente di collegare tre serie di sistemi di altoparlanti; un interruttore di controllo del bilanciamento che semplifica il lavoro di regolazione per un bilanciamento ottimale dei volumi sonori dei canali destro e sinistro; strutture per collegare due fonografi e due deck a nastro e un circuito di ristampa del nastro. Sono state inoltre prese disposizioni speciali per consentire allamplificatore di essere incorporato in un sistema stereo crossover elettronico e consentire il confronto di tale sistema con una configurazione stereo standard. specifiche Potenza di uscita: 50 watt per canale in 8ohm (stereo) Risposta in frequenza: da 20Hz a 70kHz Distorsione armonica totale: 0,4% Fattore di smorzamento: 45 Sensibilità di ingresso: 3mV (mic), 2mV (MM), 200mV ( DIN ), 200mV (linea) Rapporto segnale/rumore: 80 dB (mic), 80 dB (MM), 85 dB (linea) Uscita: 200mV (linea), 30mV ( DIN ) Impedenza di carico dellaltoparlante: 4ohm a 16ohm Semiconduttori: 41 x transistor, 16 x diodi, 2 x triac Dimensioni: 18-1/8 x 6-1/8 x 12-1/2 pollici Peso: 38,5 libbre ATTENZIONE: Articolo vintage con più di 40 anni di età, guardare le foto ingrandite in quanto larticolo presenta alcuni segni dovuti alluso e al passare del tempo, NON SI ACCETTANO RECLAMI O RICHIESTE DI RESO, Si prega di guardare attentamente prima di concludere lacquisto Compatibile con : Krell, audio research, jack, aloia, levinson, quad, sonic frontiers, audio notes, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, stage, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam, meridian, ps audio, EAD, harman, jbl , genesis, thorens, kef, linn, leak, marantz, revox, esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integrated, valvola, valvole, sinto, cd, finale, pre, dac, convertitore, van den hul, cavo, hi-fi, hi end, altoparlantiQuesti includono un circuito di selezione del tono, una forma migliorata del circuito di controllo del tono triplo che offre una scelta nella selezione delle frequenze critiche del controllo del tono; un selettore di altoparlanti che consente di collegare tre serie di sistemi di altoparlanti; un interruttore di controllo del bilanciamento che semplifica il lavoro di regolazione per un bilanciamento ottimale dei volumi sonori dei canali destro e sinistro; strutture per collegare due fonografi e due deck a nastro e un circuito di ristampa del nastro. Krell, audio research, jack, aloia, levinson, quad, sonic frontiers, audio notes, fostex, jeff rowland, pioneer , tannoy, accuphase, rotel, technicssony , kenwood, klipsch, sansui, stage, mcintosh, luxman, bose, altec, cerwin, cervin wega, arcam Número de entradas 8 Número de canales 2 Garantía del fabricante Sin garantía Tipo Amplificador integrado Potencia RMS 2 X 50 Watts RMS Color Negro EAN No aplicable Marca Sansui Entradas de audio Estéreo RCA Año de fabricación 1970-1972 País/Región de fabricación Japón Cantidad de unidades 1 Tipo de unidad Unidad Salidas de audio Banana Jack Modelo AU-999 Número de salidas 4 Características Término análogo Potencia 50 + 50 Watts RMS

Sansui TA-500 Dc Integrated Stereo Receiver 100 Wrms Vintage 1979 Work Good LookDie Beschreibung dieses Artikels erfolgte durch automatische Übersetzung. Bei anstehenden Fragen, wenden Sie sich bitte an uns. SANSUI TA-500 DC Integrierter Stereo-Receiver 100 WRMS Vintage 1979 ARBEIT Gutes Aussehen Funktioniert 100 % ORIGINAL, PERFEKT, inklusive RACK-MONTAGE Sansui TA-500 Integrierter DC-Tuner-Verstärker (1979–80) Spezifikationen Empfangsbereich: UKW, MW Ausgangsleistung: 50 Watt pro Kanal in 8Ohm (Stereo) Frequenzgang: 10 Hz bis 50 kHz Gesamte harmonische Verzerrung: 0,05 % Dämpfungsfaktor: 40 Eingangsempfindlichkeit: 2,5 mV (MM), 150 mV (Line) Signal-Rausch-Verhältnis: 75 dB (MM), 95 dB (Leitung) Kanaltrennung: 50 dB (MM), 50 dB (Line) Ausgang: 150 mV (Leitung) Lautsprecherlastimpedanz: 8Ohm (Minimum) Abmessungen: 430 x 160 x 399 mm Gewicht: 10,9 kg Kompatibel mit : Krell, Audio Research, Jack, Aloia, Levinson, Quad, Sonic Frontiers, Audio Notes, Fostex, Jeff Rowland, pioneer , Tannoy, Accuphase, Rotel, technicssony , Kenwood, Klipsch, Sansui, Bühne, Mcintosh, Luxman, Bose, Altec, Cerwin, Cervin Wega, Arcam, Meridian, PS Audio, EAD, Harman, JBL, Genesis, Thorens, KEF, Linn, Leak, Marantz, Revox, Esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integriert, ventil, ventile, sinto, CD, endgültig, Pre, DAC, Konverter, van den hul, Kabel, Hi-Fi, Hi-End, LautsprecherSANSUI TA-500 DC Integrierter Stereo-Receiver 100 WRMS Vintage 1979 ARBEIT Gutes Aussehen Funktioniert 100 % ORIGINAL, PERFEKT, inklusive RACK-MONTAGE Signal-Rausch-Verhältnis: 75 dB (MM), 95 dB (Leitung) Krell, Audio Research, Jack, Aloia, Levinson, Quad, Sonic Frontiers, Audio Notes, Fostex, Jeff Rowland, pioneer , Tannoy, Accuphase, Rotel, technicssony , Kenwood, Klipsch, Sansui, Bühne, Mcintosh, Luxman, Bose, Altec, Cerwin, Cervin Wega, Arcam, Meridian, PS Audio, EAD, Harman, JBL, Genesis, Thorens, KEF, Linn, Leak, Marantz, Revox, Esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integriert, ventil, ventile, sinto, CD, endgültig, Pre, DAC, Konverter, van den hul, Kabel, Hi-Fi, Hi-En Artículo modificado No Garantía del fabricante Sin garantía EAN No aplicable Color Negro Marca Sansui Tipo de unidad Unidad País/Región de fabricación Japón Cantidad de unidades 1 Entradas de audio Estéreo RCA Número de canales 2 Salida de audio Banana Jack Modelo TA 500

Sansui AU-999 Integrated Stereo Verstärker 100 Wrms Vintage 1972 Work Good LookDie Beschreibung dieses Artikels erfolgte durch automatische Übersetzung. Bei anstehenden Fragen, wenden Sie sich bitte an uns. SANSUI AU-999 Integrierter Stereoverstärker 100 WRMS Vintage 1972, funktioniert gut Alles 100 % ORIGINAL Vom JAPANISCHEN MARKT, generalüberholt, FUNKTIONIERT perfekt mit 220/240 Volt, mit externem Transformator KOSTENLOS im Lieferumfang enthalten! Sansui AU-999 Integrierter Festkörper-Stereoverstärker (1970-72) Beschreibung Der AU-999 ist der fortschrittlichste professionelle Kontrollverstärker, der jemals von Sansui hergestellt wurde. Es wurde speziell für den leidenschaftlichen Audiophilen entwickelt und verfügt über die raffinierten mattschwarzen Panels, die alle professionellen Kontrollverstärker der AU-Serie von Sansui kennzeichnen. Der Vorverstärkerteil besteht aus sorgfältig ausgewählten rauscharmen PNP-Siliziumtransistoren, während der Leistungsverstärkerteil über direkt gekoppelte Schaltkreise verfügt, die speziell für die Verbesserung der Klangqualität entwickelt wurden. Zusammen ermöglichen sie dem AU-999 eine Musikleistung von satten 180 Watt (4 Ohm) mit beispielloser Klangqualität. Der AU-999 ist großzügig mit Zusatzschaltungen ausgestattet. Dazu gehören eine Tonwahlschaltung, eine verbesserte Form der dreifachen Tonsteuerschaltung, die eine Auswahl bei der Auswahl der kritischen Frequenzen der Tonsteuerung bietet; ein Lautsprecherwähler, der den Anschluss von drei Lautsprechersystemen ermöglicht; ein Balance-Check-Schalter, der die Einstellung für eine optimale Balance der Lautstärken des rechten und linken Kanals vereinfacht; Einrichtungen zum Anschluss von zwei Phonographen und zwei Kassettendecks sowie eine Schaltung zum Nachdrucken von Kassetten. Es wurden auch besondere Vorkehrungen getroffen, um den Einbau des Verstärkers in ein elektronisches Crossover-Stereosystem zu ermöglichen und den Vergleich eines solchen Systems mit einer Standard-Stereoanlage zu ermöglichen. Spezifikationen Ausgangsleistung: 50 Watt pro Kanal in 8Ohm (Stereo) Frequenzgang: 20 Hz bis 70 kHz Gesamte harmonische Verzerrung: 0,4 % Dämpfungsfaktor: 45 Eingangsempfindlichkeit: 3 mV (Mikrofon), 2 mV (MM), 200 mV ( DIN ), 200 mV (Leitung) Signal-Rausch-Verhältnis: 80 dB (Mikrofon), 80 dB (MM), 85 dB (Leitung) Ausgang: 200 mV (Leitung), 30 mV ( DIN ) Lautsprecherlastimpedanz: 4Ohm bis 16Ohm Halbleiter: 41 x Transistoren, 16 x Dioden, 2 x Triacs Abmessungen: 18-1/8 x 6-1/8 x 12-1/2 Zoll Gewicht: 38,5 Pfund ACHTUNG: Vintage-Artikel, der älter als 40 Jahre ist. Schauen Sie sich die vergrößerten Fotos an, da der Artikel einige Gebrauchs- und Zeitspuren aufweist. WIR AKZEPTIEREN KEINE REKLAMATIONEN ODER RÜCKGABEANFRAGEN. Bitte schauen Sie sich den Artikel sorgfältig an, bevor Sie den Kauf abschließen Kompatibel mit : Krell, Audio Research, Jack, Aloia, Levinson, Quad, Sonic Frontiers, Audio Notes, Fostex, Jeff Rowland, pioneer , Tannoy, Accuphase, Rotel, technicssony , Kenwood, Klipsch, Sansui, Bühne, Mcintosh, Luxman, Bose, Altec, Cerwin, Cervin Wega, Arcam, Meridian, PS Audio, EAD, Harman, JBL, Genesis, Thorens, KEF, Linn, Leak, Marantz, Revox, Esb , infinity, chario, naim, focal, yba, monrio, am audio, ar, allison, monster cable, shure, scan, seas, lowther, vinyl, turntable, nos, tube, high end, integriert, ventil, ventile, sinto, CD, endgültig, Pre, DAC, Konverter, van den hul, Kabel, Hi-Fi, Hi-End, LautsprecherDazu gehören eine Tonwahlschaltung, eine verbesserte Form der dreifachen Tonsteuerschaltung, die eine Auswahl bei der Auswahl der kritischen Frequenzen der Tonsteuerung bietet; ein Lautsprecherwähler, der den Anschluss von drei Lautsprechersystemen ermöglicht; ein Balance-Check-Schalter, der die Einstellung für eine optimale Balance der Lautstärken des rechten und linken Kanals vereinfacht; Einrichtungen zum Anschluss von zwei Phonographen und zwei Kassettendecks sowie eine Schaltung zum Nachdrucken von Kassetten. Krell, Audio Research, Jack, Aloia, Levinson, Quad, Sonic Frontiers, Audio Notes, Fostex, Jeff Rowland, pioneer , Tannoy, Accuphase, Rotel, technicssony , Kenwood, Klipsch, Sansui, Bühne, Mcintosh, Luxman, Bose, Altec, Cerwin, Cervin Wega, Arcam, Meridian, PS Audio, EAD, Harman, Número de entradas 8 Número de canales 2 Garantía del fabricante Sin garantía Tipo Amplificador integrado Potencia RMS 2 X 50 Watts RMS Color Negro EAN No aplicable Marca Sansui Entradas de audio Estéreo RCA Año de fabricación 1970-1972 País/Región de fabricación Japón Cantidad de unidades 1 Tipo de unidad Unidad Salidas de audio Banana Jack Modelo AU-999 Número de salidas 4 Características Término análogo Potencia 50 + 50 Watts RMS

SANSUI SMS-800BT CD Stereo System w/ Bluetooth & USB2.0, Tested, AC100V DescriptionItem includes cords, remote control and owners manual. Please have a look at the photo. If you have any questions, please email us. Please let us know what else you are looking for in Japan. Shipping Economy about 14 - 21 Business days Japan Post and Your Countrys Postal Service : Economy Air Mail. (Without tracking number) Standard about 6 - 11 Business days Japan Post and Your Countrys Postal Service : Standard Air Mail (With tracking number) Expedited about 2 - 5 Business days FedEx or DHL?or UPS : Express Registered Air Mail (With tracking number) *there is a case to take the days to customs clearance. Notes: [ Economy and Standard shipping ] *Available for the item weighted less than 2kg. *There are some which can not be depending on a product. *Shipping available country is limited. *Currently, from Japan to USA and some other countries, Japan Posts economy flights have been canceled and we are using standard DHL or FedEx or UPS flights. Due to the delay in overseas shipping operations, Thank you for your understanding. About Us We are located in Japan.Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items, please feel free to ask us. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up-do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts”-US and International government regulations prohibit such behavior.

All proceeds from this sale go to the British Heart Foundation to fund more breakthroughs and help save more lives. Click to find out more about this item SANSUI S-310 2-Way Speaker System 8 Ohms 35W Air Suspension - N44 Item Description Please be aware: All Items pictured are included. If items are not pictured which you feel should be, please assume they are not included. As our items are donated we are unsure if any accessories are missing from when the item was new. Item Specifics SANSUI S-310 2-Way Speaker System 8 Ohms 35W Air SuspensionItem Condition After a brief function test, we can confidently state that this product is fully operational. Nevertheless, it is important to acknowledge the presence of minor cosmetic blemishes resulting from prior usage. With thousands of unique items for sale every week, a repeat visit to the BHF eBay site is a must!As the number 1 largest charity online reseller in the world our stock changes daily, so be sure to add us to your favourites! Who knows what treasures will be for sale tomorrow? So if you are looking for the perfect gift, or something out of the ordinary? Maybe a collectible item or that something special to say thank you to a loved one or family member – BHFs eBay shop has probably got that unique item. Be sure to scroll through our online shop and search amongst the many categories and see what bargain you can pick up this week. BHF eBay shop – Unique EVERY week! SANSUI S-310 2-Way Speaker System 8 Ohms 35W Air Suspension - N44 Electricals FAQs Electricals FAQs General FAQs Customer Services Returns & Refunds About Us Electricals FAQs What is a PAT and Has This Item Been PAT Tested? Portable appliance testing (PAT) is the term used to describe the examination of electrical appliances and equipment to ensure they are safe to use. All of our electrical items are PAT tested. If the item has failed its PAT test, the item will be listed as spares and repairs and failure reasons will be noted. What Is a FACTORY RESET and Has One Been Done On This Item? A factory reset, also known as master reset, is a software restore of an electronic device to its original system state by erasing all of the information stored on the device in an attempt to restore the device to its original manufacturer settings. If an item has had a factory reset in our store, this will be detailed in the listing condition. To What Extent Has This Item Been Tested? As all our items are donated to us, we do not always have the facilities or resources to fully test our items. Please see our definitions of the types of tests we do below, the extent of testing will be provided in our listing conditions: 1.Power Test Only - The item has been plugged in and the power button has been pressed and the light shines to show the item turns on. No further tests have been done. Due to the fact this item is only power tested we are unsure if any other parts of the item function as they should. Please be aware the item could be faulty, we ask that you please bid accordingly. 2.Briefly tested - The item has been plugged in and powers on, basic tests have been carried out on the items main functions to ensure the item operates on a basic level. Certain aspects may have not been tested due to resources available. 3.Untested - The item has not been turned on and tested. Are the Cables and Accessories Included? Please see our images for all components included (this includes power cables and remotes). What Is the Condition Of The Item? All our items are donated to us and are therefore second hand in most cases. With this in mind, we always recommend having the item serviced prior to use as we do not have the facilities to do this in store. Any faults are described in the listing condition and we also aim to take pictures of our items from various angles, so that our customers can inspect the cosmetic condition.? What Does No OS / Operating System Mean? The OS is the Operating System, also known as Windows or IOS. This means you will have to purchase a copy of the Windows/IOS software in order for your PC/Mac device to work. General FAQs General FAQs Can You Provide Extra Images of The Item? Once our items are listed on eBay they are placed in storage to keep them safe until auction end. This means that we are unable to take extra images if requested. Please be aware: All Items pictured are included. If items are not pictured which you feel should be, please assume they are not included. As our items are donated we are unsure if any accessories are missing from when the item was new. Do You Accept Buy It Now Prices? We do not accept Buy It Now prices and it is BHFs eBay policy to let all auctions run their course. Can I View Before Bidding? Based on eBays selling outside eBay policy, unfortunately we cannot allow customers to view items for sale prior to purchase. Can I Pay Cash? We only accept payment via the eBay managed payments system, information regarding managed payments can be found in eBay help & contact. Do You Combine Invoices? If you buy multiple items from us and your items are located at our central Leeds warehouse, we will combine your orders. Combining your orders will usually result in you receiving your items in fewer parcels and receiving a reduced postage cost at checkout. If you buy more than 1 item your postage will be calculated by discounting additional item postage costs by 80% for UK and 30% for overseas, the highest postage cost will always be your base cost. The maximum we will charge for a UK combined order is £10. Please note that some items are now being sent directly from our shops across the UK, as well as our central eBay hub in Leeds. These items cannot be combined for postage with your other items as they are being sent from a separate location. Any items eligible for combined postage will be combined automatically on the evening the auction ends and youll see this information at checkout. Please note that once items are combined, we are not able to separate items out from the order. If you do request this, the whole order will be cancelled. Please note that we can only combine items, which are won within 7 days of each other. Customer Services Customer Services Customer Service Please contact us with any questions you have relating to this item. Our dedicated customer service team operate from 9am-5pm Monday - Friday and we will respond to your query within 48 hours between these operating times. Payment All payments are managed through the eBay managed payments system, and you will be able to choose your preferred method of payment at the time of checkout. Payment must be made within 12 days. Delivery We will despatch items within 2 working days of receiving payment via the shipping method outlined on your invoice. We cannot hold items once payment is made. We cannot send your item to an alternate address once payment is made. Any requests will result in the cancellation of the transaction. Returns & Refunds Returns & Refunds Returns and Refunds We accept all returns within 30 days of purchase. Please contact us for help or open a return via the eBay returns centre if you would like to return your item.In the rare event that an item is damaged in transit the process couldnt be simpler. If possible, send us a photo of the item in the received condition and we will contact you to resolve the issue. Alternatively, please return the item using our freepost service and we will credit your eBay account within 2-3 working day of receiving the returned item.Once an item is received at our office, a refund will be processed via eBay within 2 working days. About Us About Us Support the British Heart Foundations lifesaving research As the UKs number one heart charity, the cutting-edge research we fund has already made a big difference to peoples lives. Every penny you spend or donate with us takes us closer to beating heart disease for good. Featured Categories Furniture Womens Fashion Mens Fashion Electricals Collectables Jewellery Photography Antiques & Vintage Computers & Gaming Helpful Links Add to Favourite Sellers Sign up to Newsletter View Feedback Contact Seller Visit sellers eBay Shop About Seller Page Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

TESTED

Vintage instructions in excellent condition.

Sansui B-2102 Stereo Power Amplifier Hi End 400W RMS Vintage Unit was tested with speakers. Unit is fully functional and sounds great. In excellent cosmetic condition shown in photos Will be shipped double boxed and padded SpecificationsPower output: 200 watts per channel into 8? (stereo)Frequency response: 1Hz to 300kHzTotal harmonic distortion: 0.003%Input sensitivity: 1VSignal to noise ratio: 115dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 160 x 412mmWeight: 17.7kg

The Sansui 9090DB AM/FM stereo receiver DUAL DECK 100k Ohms TONE CONTROL POT as pictured. Its pulled, in good condition. This item is intended for professional (service tech / skilled audio hobbyist), and it is final (NO RETURN or REFUND) Please buy or bid accordingly. Thanks for looking.

Sansui B-2102 Stereo Power Amplifier Hi End 400W RMS Vintage 1987 very rare soun very sound hi fi perfettamente funzionante vendo a prezzo regalo

Hashimoto Electric Co., Ltd. owns all the know-how of Sansui Transformers because the transfer of SANSUI transformers to Hashimoto in 1978 was a complete transfer including technical materials and design engineers. Specification Part NumberH-20-14URating Power (W)20W at 50HzPrimary Impedance10K/14K OhmSecondary Impedance4,8,16?SG tap Provided?YesFrequency Response30Hz?50kHz (+-2dB)Insertion Loss0.3dBPrimary Inductancew/ Applied Current10Kohm 40H/50mA 14Kohm 50H/45mAMaximum Rating DC Current80mAOutline typeWE-85Size (AxBxH : refer to Drwg.)88x80x110HScrew Size (mm)M4Weight?2.4KgImpedance matched Tube6V6,VT-62/801A,42,6F6, VT-25/10

Hashimoto Electric Co., Ltd. owns all the know-how of Sansui Transformers because the transfer of SANSUI transformers to Hashimoto in 1978 was a complete transfer including technical materials and design engineers. Specification Primary: 10 Kohms Secondary: 600/150 Ohms, Sprit Frequency Response (-2dB) 20-45,000Hz Insertion Loss: 0.7dB Rating Current 15 mA Maximum Current 30mA Outline: WE-60 Size 58 x 52 x 85Hmm Mass 0.8Kg