DescriptionCondition : USED ?Status This product is a used item, so Please note that there may be signs of use, scuffs, and small scratches. Operation has been confirmed It will be confirmed that only the sound output is connected to the speaker. Please note that this item belongs to my father, so I do not know the details. This is a chock for volume and input selection only. This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

SANSUI AU-?607KX AU-a607KX Stereo Integrated Premain Amplifier JAPAN Working F/S DESCRIPTION AND CONDITIONUSED?BrandSANSUISansui?Serial numberAU-?607kx?Product nameIntegrated amplifier?Condition This product is used.Please note that there may be signs of wear, scratches, and small scratches. Operation confirmed. Connected to speakers to check sound output only.. This is my fathers, so I dont know the details, so please understand. This is a chock that only has volume and input select, so please consider it a junk item. ?Please note that there may be some oversights due to amateur inspection. ?Accessories ?Please note that hangers, shoe keepers, etc. are not included as they are for photography purposes. SHIPPINGShip from JAPANSHIP VIA FEDEX OR DHLWE CHOOSE THE BETTER DELIVERY CARRIER ACCORDING TO THE ITEM AND THE DESTINATION COUNTRYWe ship the item with a tracking number. please place an order without any concern on delivery. You can always track the delivery status.Usually the item deliver to you in 2-5 days after we shipped the item out.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior. PolicyPaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

DescriptionCondition : USED Thank you for looking. [Product]-SANSUI AU-?607KX [Operation/Condition]-Regarding operation, it can be used without any problems. [Appearance]-There are no scratches overall and I think it is in relatively good condition considering it was made about 30 years ago.-The text is not illegible, but it is faded, so please check the photo. [Contents]-Main body only. [Specifications]- integrated amplifier- Size: 430 x 161 x 446 mm- Weight: 18 kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Thank you for looking. [Product]-SANSUI AU-?607KX Integrated Amplifier [Operation/Condition]- Working condition.- Working without any problems.- No crackling and sound.*Basic operation has been confirmed, but other detailed operation has not been confirmed. [Appearance]- Polished plated plugs and gold plated plugs are still in good condition.- Overall beautiful item.- No noticeable scratches or stains.- Good condition. [Contents]- Main unit only. [Specifications]- Type: Integrated amplifier- Rated power consumption:- External dimensions: 430 (W) x 161 (H) x 446 (D) mm- Weight: 18.0 kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Thank you for viewing. [Product]- SANSUI AU-?607KX Integrated Amplifier [Operation/Condition]- Operation confirmed.- Working condition.- Maintenance completed in July 2023. [Appearance/Condition]- Used item for daily use.- There are scratches and dirt on the main unit.* Please check the image. [Contents]- Main unit only. [Specifications]- Power supply voltage: AC100V, 50Hz/60Hz- Rated power consumption: 250W- External dimensions: 430(W)x161(H)x446(D)mm- Weight: 18.0kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Condition : USED Thank you for viewing our products from among the many available. [Product] - Sansui AU-?607KX Stereo Integrated Amplifier [Operation/Condition] - Operation confirmed -The connection parts have been cleaned with contact cleaner. Power and sound have been confirmed. Caution: There may be some rattling noise when the sound is produced. [Appearance] -There are scratches and dirt due to aging. [Contents] -Main unit only [Specifications] - Model rating Type Integrated amplifier< Power amplifier section>Effective output(10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?)90W+90W (8?)Total harmonic distortion (at effective output) 0.003% or less (8?)Intermodulation distortion 0.003% or less (8?)Damping factor 150 (8?)Frequency response (1W) DC to 300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?Signal-to-noise ratio (A network) 120dB or moreDynamic power 280W (2?)220W (4?)155W (6?)TIM distortion (SAWTOOTH) Below measurement limitSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM: 2.5mV/47k?Phono MC: 300?V/100?CD, Tuner, Line, Tape/DAT1, 2, 3: 150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mVMC (THD 0.1%): 21mVFrequency response (1W) Phono MM: 20Hz to 20kHz ±0.2dBCD, Tuner, Line, Tape/DAT-1, 2, 3: DC to 200Hz, +0 -3dBSignal-to-noise ratio (A network) Phono MM: 88dB or morePhono MC: 70dB or moreCD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz)TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz (-3dB), 6dB/octLoudness 50Hz: +6dB10kHz: +4dBRated power consumption 250WExternal dimensions Width 430 x Height 161 x Depth 446mmWeight 18.0kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED This is a SANSUI integrated amplifier, AU-? 607KX. [Operation]- Power supply and sound output confirmed. [Items for sale]- Everything in the pictures is included.- No remote control, accessories, manual, etc. [Appearance]- There is some rust and scratches due to use.- The connection parts have been cleaned with contact cleaner. [***Caution ***]There is a scratching sound when the sound is output. I tried to remove it with contact cleaner, but it did not solve the problem. This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : AS-IS This item is junk. [Operation check]- Power confirmed.- Output does not work. [Appearance]- Slightly scratched and dirty. [Items for sale]- Main unit- Manual * 607 series integrated amplifier with advanced ?-X balanced circuit.The technology used is almost the same as the higher-end model, and newly developed insulators are used. This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns This product has not been tested. Therefore, returns cannot be accepted. Please understand this before purchasing. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionCondition : USED Condition : USED Thank you for viewing our products from among the many available. [Product] -Sansui AU-?607KX Stereo Integrated Amplifier [Operation/Condition] -It works well, there are no problems with each input and output, the tone control is normal, and the sound is good. [Appearance] -There are scratches and dirt due to aging. [Contents] -Main unit only [Specifications] - Model rating Type Integrated amplifierEffective output(10Hz to 20kHz, both channels operating simultaneously) 105W+105W(6?)90W+90W(8?)Total harmonic distortion (at effective output) 0.003% or less(8?)Intermodulation distortion 0.003% or less(8?)Damping factor 150(8?)Frequency response (1W) DC to 300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?Signal-to-noise ratio (A network) 120dB or moreDynamic power 280W(2?)220W(4?)155W(6?)TIM distortion (SAWTOOTH) Below measurement limitSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM: 2.5mV/47k?Phono MC: 300?V/100?CD, Tuner, Line, Tape/DAT1, 2, 3: 150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mVMC (THD 0.1%): 21mVFrequency response (1W) Phono MM: 20Hz to 20kHz ±0.2dBCD, Tuner, Line, Tape/DAT-1, 2, 3: DC to 200Hz, +0 -3dBSignal-to-noise ratio (A network) Phono MM: 88dB or morePhono MC: 70dB or moreCD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz)TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz (-3dB), 6dB/octLoudness 50Hz: +6dB10kHz: +4dBRated power consumption 250WExternal dimensions Width 430 x Height 161 x Depth 446mmWeight 18.0kg This product is an authentic product sold in Japan. Please be assured that we package each item carefully without causing damage. Shipping We send a product with careful packing. After confirm your payment, Well ship this item within 5 business days. (except for Saturday, Sunday and national holiday in JAPAN) Weekends are not available because FedEx or DHL are closed. Returns We accept return items up to 60 days after the item has arrived. If you receive a defective product, please contact us. We will bear the return shipping costs. Please buy with confidence. About us Thank you for your seeing our page. Please feel free to question if there is an uncertain point on this page. We cordially answer it. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

DescriptionThank you for visiting. This product is sold as-is because its operation has not been tested or there is no environment in which it can be tested. We are selling this item as junk or as parts for those who can repair it. There is only one left, so please consider as soon as possible. All accessories are shown in the photo.Important point. Condition is a personal opinion. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting.Payment Payment can be made by credit card, PayPal, and many other methods. Payment must be made within 3 days after the end of the auction. We will ship within 10 business working days (except national holidays, Saturdays and Sundays in Japan time) for shippiing.Shipping We will send the products from DHL FedEx and JAPAN Post. The package will arrive in 5-14 days after shipping. A tracking number will be attached, so please enjoy your shopping with confidence. Shipping is only available at the address registered with PayPal. Please note that addresses not registered with PayPal will not be accepted. Ships from Monday to Friday. It is not available on weekends as the any Office is closed.Terms of Sale Customer service and satisfaction are very important to us. There is an unconditional return policy if notified within 30 days of receipt of the item. All returned items must be in their original condition. All return requests must be made within 30 days of receipt of the item. Please contact me for return first before you return it to me. The shipping cost for returned goods will be borne by the seller.Tariffs: To overseas buyersPlease be careful Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to find out what these additional costs will be before bidding or purchasing.If the cancellation is due to the purchaser, we will charge a PayPal fee. If your address has remote charges, we will charge you additional shipping charges at a later date.

DescriptionThank you for visiting. With normal use, some scratches, dirt, and deformation of the box may be seen. There is only one left, so please consider as soon as possible. All accessories are shown in the photo.Important point. Condition is a personal opinion. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting.Payment Payment can be made by credit card, PayPal, and many other methods. Payment must be made within 3 days after the end of the auction. We will ship within 10 business working days (except national holidays, Saturdays and Sundays in Japan time) for shipping.Shipping We will send the products from DHL FedEx and JAPAN Post. The package will arrive in 5-14 days after shipping. A tracking number will be attached, so please enjoy your shopping with confidence. Shipping is only available at the address registered with PayPal. Please note that addresses not registered with PayPal will not be accepted. Ships from Monday to Friday. It is not available on weekends as the any Office is closed.Terms of Sale Customer service and satisfaction are very important to us. There is an unconditional return policy if notified within 30 days of receipt of the item. All returned items must be in their original condition. All return requests must be made within 30 days of receipt of the item. Please contact me for return first before you return it to me. The shipping cost for returned goods will be borne by the seller.Tariffs: To overseas buyersPlease be careful Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to find out what these additional costs will be before bidding or purchasing.If the cancellation is due to the purchaser, we will charge a PayPal fee. If your address has remote charges, we will charge you additional shipping charges at a later date.

DescriptionIt is in working condition.Before listing it, I checked again to make sure that sound was coming out of the CD input.There was no scratching and it appears to be in relatively good condition. There was a light oxide coating on the unused RCA terminals on the back,so I cleaned them briefly and checked whether each one made sound. The appearance is relatively good, but there are some minorscratches on the plastic part on the right side (see fifth photo). There is also some surface dirt that appears to be due to aging,but as it is not something that is touched very often, it is in relatively good condition.Shipping Fedex,DHL,Japan Post *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.Read more... Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

Sansui AU-?607KX Stereo Integrated Amplifier Tested from Japan Description Condition: used Manufactured circa 1992. Scratches and rust are scattered throughout the exterior, and are noticeable on the top panel and corners. The terminals are corroded and lightly stained, and appear to be in good condition for their age. This is the main unit only. The tone control is in good condition and the sound output is good. The rubber feet on the bottom of the unit are slightly torn and deteriorated. We have cleaned and checked the operation.Gross weight: 20kg All my products are 100% Authentic.Please feel free to contact us if you have any question.Please check the picture. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Product description A 607 series integrated amplifier that uses an advanced ?-X balance circuit. The technology introduced is almost the same as the high-end model, and a newly developed insulator is used. *Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise. In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved. The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values. *All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB. *The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input. Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed. *The power supply section uses a NEW ?-X balanced power supply. As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure. *Introduced isolated mechanical feedback to control amplifier vibration and resonance. Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink. Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations. *The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration. *We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series. ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used. In addition, copper plated screws are used for the front panel mounting screws. *Equipped with source power direct, all line inputs can be directly connected to the power amplifier section. *Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc. ?Main specifications Model Integrated Amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?) Total harmonic distortion rate (at effective output) 0.003% or less (8?) Cross modulation distortion rate 0.003% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC~300kHz+0 -3dB Input sensitivity/impedance (1kHz) 1V/5k? SN ratio (A network) 120dB or more Dynamic power 280W (2?) 220W (4?) 155W (6?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dB SN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or more Tone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness 50Hz:+6dB?10kHz:+4dB Rated power consumption 250W External dimensions Width 430x Height 161x Depth 446mm Weight 18.0kg ?The condition of the product is C RANK: Used item with signs of use and many scratches and stains. Maintenance completed in July 2023 For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product description A 607 series integrated amplifier that uses an advanced ?-X balance circuit. The technology introduced is almost the same as the high-end model, and a newly developed insulator is used. *Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise. In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved. The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values. *All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB. *The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input. Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed. *The power supply section uses a NEW ?-X balanced power supply. As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure. *Introduced isolated mechanical feedback to control amplifier vibration and resonance. Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink. Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations. *The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration. *We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series. ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used. In addition, copper plated screws are used for the front panel mounting screws. *Equipped with source power direct, all line inputs can be directly connected to the power amplifier section. *Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc. ?Main specifications Model Integrated Amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?) Total harmonic distortion rate (at effective output) 0.003% or less (8?) Cross modulation distortion rate 0.003% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC~300kHz+0 -3dB Input sensitivity/impedance (1kHz) 1V/5k? SN ratio (A network) 120dB or more Dynamic power 280W (2?) 220W (4?) 155W (6?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dB SN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or more Tone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness 50Hz:+6dB?10kHz:+4dB Rated power consumption 250W External dimensions Width 430x Height 161x Depth 446mm Weight 18.0kg ?The condition of the product is that there are no noticeable scratches or stains. The appearance is very beautiful and the sound is also beautiful. For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated AmplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is that there are no noticeable scratches or stains.The appearance is very beautiful and the sound is also beautiful.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *A twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated AmplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is C RANK: Used item with signs of use and many scratches and stains.Maintenance completed in July 2023For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

SANSUI AU-?607KX | Stereo Integrated Amplifier Manual Pre-Owned Good Condition Description Model number: AU-A607KXWarranty period: 6 months Guaranteed shipping: 1-2 days later Registration date: December 22, 2023 Release date: 1992Rated outputEffective output 105W+105W(6?) 90W+90W(8?)impedancePhono MM: 47k? MC: 100? CD, Tuner, Line, Tape/DAT1?2?3: 20k?Play frequencyCD, Tuner, Line, Tape/DAT-1/2/3: DC~200Hz, +0 -3dB Phono MM:20Hz~20kHz±0.2dBS/N ratio120dB or moreFeatures/Notes607 series integrated amplifier with almost the same technology as high-end modelsFeatures/NotesThere is dirt on the terminals and rust on the screws, etc.WEB No.1010080000039016[Display based on the Secondhand Goods Business Act: Niigata Prefecture Public Safety Commission No. 461060001043] If you have any questions, please feel free to contact me.Please check the condition of the product in the photo.All items are in the picture.?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.At my shop, I will check the items that need to be checked before shipping.I will take a video of the operation confirmation.You can check the video on YouTube.This service gives buyers peace of mind.Payment ??Please payment within ??3 days after the auction closed. Shipping Ship by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

SANSUI AU-?607KX | Stereo Integrierter Verstärker Handbuch GebrauchtDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.  SANSUI AU-?607KX | Stereo-Vollverstärker, Bedienungsanleitung, gebraucht   Beschreibung Modellnummer: AU-A607KX [Wartung abgeschlossen]Garantiezeitraum 3 Monate Garantie Voraussichtlicher Versand innerhalb einer Woche Registrierungsdatum 21. April 2023 NennleistungEffektive Leistung: 105W+105W(6?) 90W+90W(8?)WiedergabefrequenzLeistungsverstärkerabschnitt: DC ~ 300kHz +0 -3dB Vorstufe: Phono MM: 20Hz ~ 20kHz ± 0,2dB CD, Tuner, Line, Tape/DAT-1?2?3: DC ~ 200Hz, +0 -3dBEigenschaften/HinweiseDer speziell konstruierte Isolator ist mit Kupfer beschichtet befestigt Schrauben zur Unterdrückung einer Verschlechterung der Klangqualität aufgrund von Vibrationen.Merkmale/HinweiseSN-Verhältnis (A-Netzwerk): Phono MC: 70 dB oder mehrMerkmale/HinweiseSN-Verhältnis (A-Netzwerk): Phono MM: 88 dB oder mehrMerkmale/HinweiseSN-Verhältnis (A-Netzwerk): CD, Tuner , Line, Tape/DAT-1/2/3: 110 dB oder mehrMerkmale/AnmerkungenWartung im Juli 2023 abgeschlossenMerkmale/AnmerkungenDas Hauptgehäuse weist Kratzer und Schmutz auf. WEB-Nr. 2012250000028135[Anzeige basierend auf dem Secondhand Goods Business Law: Hokkaido Public Safety Commission NEIN. 101020001003]Bei Fragen stehe ich Ihnen gerne zur Verfügung.Bitte überprüfen Sie den Zustand des Produkts auf dem Foto.Alle Artikel sind auf dem Bild zu sehen.?Hinweis: Nur für eingeschaltete Produkte. Produkte, die sich nicht einschalten lassen, sind nicht zulässig?  Die Stromversorgung für dieses Produkt beträgt AC100V 50/60Hz.In manchen Ländern kann ein Transformator erforderlich sein.Bitte legen Sie den Trafo kaufseitig bereit. Steckdosen-Spezifikationen ? Typ AWenn es sich vom Typ A unterscheidet, ist ein Konverter erforderlich.     Sie in anderen Bereichen als 100 V.Wenn Sie den von mir verkauften Transformator verwenden, können Sie ihn in anderen Bereichen als 100 V einsetzen.ebay.comhttps://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958Wir verkaufen auch über andere Plattformen als ebay.com.Bitte nehmen Sie Kontakt mit uns auf, wenn Sie kaufen möchten.Bei weiteren Fragen stehe ich Ihnen gerne zur Verfügung.* In manchen Gegenden ist dies möglicherweise nicht möglichBitte überlegen Sie es sorgfältig.In meinem Geschäft überprüfe ich die Artikel, die vor dem Versand überprüft werden müssen. Ich mache ein Video von der Vorgangsbestätigung. Sie können sich das Video auf YouTube ansehen. Dieser Service gibt den Käufern Sicherheit.Zahlung ??Bitte Zahlung innerhalb ??3 Tage nach Auktionsende. Versand Versand per Express EMS oder DHL oder FedExWir liefern mit der schnellsten Versandmethode.Versand mit Schaden-/VerlustversicherungMit Trackingnummer??(10–15 Tage in die USA) ??(10–30 Tage oder mehr in andere Länder) Verkaufsbedingungen ??[Über zurückgegebene Waren]????Rücksendungen werden nur akzeptiert, wenn der Artikel?   nicht der in der Auktion beschriebene Artikel.            [Zurückkehren]       Rücksendungen aus persönlichen Gründen werden nicht angenommen.    Internationale Käufer - Bitte beachten Sie: Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen.  Zur Verfügung gestellt von HARUModellnummer: AU-A607KX [Wartung abgeschlossen]Garantiezeitraum 3 Monate Garantie Voraussichtlicher Versand innerhalb einer Woche Registrierungsdatum 21. April 2023 NennleistungEffektive Leistung: 105W+105W(6?) 90W+90W(8?)WiedergabefrequenzLeistungsverstärkerabschnitt: DC ~ 300kHz +0 -3dB Vorstufe: Phono MM: 20Hz ~ 20kHz ± 0,2dB CD, Tuner, Line, Tape/DAT-1?2?3: DC ~ 200Hz, +0 -3dBEigenschaften/HinweiseDer speziell konstruierte Isolator ist mit Kupfer beschichtet befestigt Schrauben zur Unterdrückung einer Verschlechterung der Klangqualität aufgrund von Vibrationen.Merkmale/HinweiseSN-Verhältnis (A-Netzwerk): Phono MC: 70 dB oder mehrMerkmale/HinweiseSN-Verhältnis (A-Netzwerk): Phono MM: 88 dB oder mehrMerkmale/HinweiseSN-Verhältnis (A-Netzwerk): CD, Tuner , Line, Tape/DAT-1/2/3: 110 dB ode MPN Does not apply Brand Sansui Rated power consumption 250W Model AU-?607KX Color Silver Type Integrated Amplifier UPC Does not apply

SANSUI AU-?607KX | Stereo Integrated Amplifier Manual Pre-Owned Description Model number: AU-A607KX [Maintenance completed]Warranty period 3 months Warranty Estimated shipping within 1 week Registration date April 21, 2023 Rated outputEffective output: 105W+105W(6?) 90W+90W(8?)play frequencyPower amplifier section: DC ~ 300kHz +0 -3dB Pre section: Phono MM: 20Hz ~ 20kHz ± 0.2dB CD, Tuner, Line, Tape/DAT-1?2?3: DC ~ 200Hz, +0 -3dBFeatures/NotesThe specially constructed insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.Features/NotesSN ratio (A network): Phono MC: 70dB or moreFeatures/NotesSN ratio (A network): Phono MM: 88dB or moreFeatures/NotesSN ratio (A network): CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreFeatures/NotesMaintenance completed in July 2023Features/NotesThere are scratches and dirt on the main body.WEB No.2012250000028135[Display based on Secondhand Goods Business Law: Hokkaido Public Safety Commission No. 101020001003] If you have any questions, please feel free to contact me.Please check the condition of the product in the photo.All items are in the picture.?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.At my shop, I will check the items that need to be checked before shipping.I will take a video of the operation confirmation.You can check the video on YouTube.This service gives buyers peace of mind.Payment ??Please payment within ??3 days after the auction closed. Shipping Ship by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

DescriptionGrade : Used Operation confirmed. There are some scratches. All my products are 100% Authentic. Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL and Japan Post.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

DescriptionGrade : Used Operation confirmed. There are some scratches. All my products are 100% Authentic. Payment We usually ship within 5 business days of receiving cleared payment. Shipping We ship using FedEx, DHL and Japan Post.International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. We do not undervalue (i.e., ship as a gift or greeting card). Buyer is responsible for payment of customs duties. No refunds will be made for refusal to pay customs duties.

SANSUI AU-?607KX | Stereo Integrated Amplifier Manual Pre-Owned Description Model number: AU-?607KXWarranty period 3 months Warranty Estimated shipping within 1 week Registration date July 7, 2024 Release date: 1992Features/Notes607 series integrated amplifier that uses advanced A-X balance circuit, maintained by our designated company in July 2024Features/NotesAn integrated amplifier that allows you to enjoy the lustrous and thick sound typical of Sansui. The phono input also supports MM/MC, making it a model recommended for analog users.WEB No.2013240000042727[Display based on Secondhand Goods Business Law: Hokkaido Public Safety Commission No. 101020001003] If you have any questions, please feel free to contact me.Please check the condition of the product in the photo.All items are in the picture.?Note only for products that are turned on.?????????????Products that do not turn on are not eligible? The power supply for this product is AC100V 50/60Hz.A transformer may be required in some countries.Please prepare the transformer on the purchase side. Outlet specifications??A typeIf it is different from A type, a converter is required. You in areas other than 100V.If you use the transformer I sell, you can use it in areas other than 100V.ebay.comhttp://www.ebay.com/itm/373547463184ebay.ukhttps://www.ebay.com/itm/373547520813 ebay.euhttps://www.ebay.com/itm/373547520926ebay.auhttps://www.ebay.com/itm/373547520958We also sell other than ebay.com.Please contact us if you would like to purchase.If you have any other questions, please contact me.* It may not be possible in some areasPlease consider carefully.At my shop, I will check the items that need to be checked before shipping.I will take a video of the operation confirmation.You can check the video on YouTube.This service gives buyers peace of mind.Payment ??Please payment within ??3 days after the auction closed. Shipping Ship by express EMS?or DHL or FedExWe will deliver by the fastest delivery method. Shipment with damage / loss insuranceWith tracking number ??(10-15 days to US) ??(10-30days or more to Other countries) Terms of Sale ??[About returned goods]????Returns are accepted only if the item was ? not the item described in the aution. [Return] Returned goods for personal reasons will not be accepted. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

Product descriptionA 607 series integrated amplifier that uses an advanced ?-X balance circuit.The technology introduced is almost the same as the high-end model, and a newly developed insulator is used.*Advanced ?-X balance circuit has a balanced configuration in which signal transmission and amplification are performed at the same time, and the amplifiers amplification circuit and ground circuit are completely separated, so the circuit itself is generated on the speaker side. This blocks back electromotive current and common mode distortion caused by external noise.In addition, a total of four dedicated amplifiers on the + and - sides of the output drive the speakers under the same conditions from both sides, achieving low distortion, and by lowering the impedance of the circuit. The frequency characteristics have been significantly improved.The power stage is equipped with NM-LAPT developed exclusively for audio, and everything down to the bonding wire is completely non-magnetic with pure copper material to obtain excellent high frequency characteristics and current limit values.*All stages from input to output are configured as wide-range DC amplifiers, expanding the frequency characteristics of the bare characteristics, improving phase characteristics, and reducing distortion to minimize NFB.*The power stage uses a new diamond differential circuit that can take out the - side output without phase reversal, and suppresses TIM distortion due to its quick response to instantaneous signal input.Furthermore, by cascading the first-stage FETs, the circuit has a wide range and high speed.*The power supply section uses a NEW ?-X balanced power supply.As a closed loop that is independent from the ground, it minimizes power imbalance that can cause deterioration in sound quality. *Twin monaural construction is used, with the power supply section placed in the center of the amplifier and the power units placed symmetrically on either side of it to achieve the optimal weight balance as a structure.*Introduced isolated mechanical feedback to control amplifier vibration and resonance.Pure copper vibration damping isolation parts are used in vibration transmission paths such as between the master volume and the chassis and between the power transistor and the heat sink.Furthermore, Teflon sheets with high internal loss and excellent vibration absorption ability are pasted between the insulator and the bottom plate, and Teflon tape is pasted between the heat sink and the bonnet and chassis to isolate vibrations.*The newly developed special structure insulator is fixed with copper plated screws to suppress sound quality deterioration due to vibration.*We have carefully selected and adopted high-quality sound parts obtained through the development of Sansuis Vintage series.ARS, gold-plated lead film capacitors, RMG gold-plated resistors, etc. are used.In addition, copper plated screws are used for the front panel mounting screws.*Equipped with source power direct, all line inputs can be directly connected to the power amplifier section.*Equipped with Rec selector, 10 all gold-plated input terminals, 6 detent volumes, power cord with polarity display, etc.?Main specificationsModel Integrated amplifierEffective output (10Hz to 20kHz, both channels operating simultaneously) 105W+105W (6?) 90W+90W (8?)Total harmonic distortion rate (at effective output) 0.003% or less (8?)Cross modulation distortion rate 0.003% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC~300kHz+0 -3dBInput sensitivity/impedance (1kHz) 1V/5k?SN ratio (A network) 120dB or moreDynamic power 280W (2?) 220W (4?) 155W (6?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT1?2?3:150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM: 20Hz to 20kHz±0.2dB CD, Tuner, Line, Tape/DAT-1/2/3: DC to 200Hz, +0 -3dBSN ratio (A network) Phono MM: 88dB or more Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1/2/3: 110dB or moreTone control BASS maximum change: ±6dB (50Hz) TREBLE maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness 50Hz:+6dB?10kHz:+4dBRated power consumption 250WExternal dimensions Width 430x Height 161x Depth 446mmWeight 18.0kg?The condition of the product is that there are no noticeable scratches or stains.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.