Description & Condition ?Sansui?Reference Amplifier?Model number Au-?907i Mos Limited?Release date 1987?List price 198,000 yen?Accessories None?Standard used item?Perfectly functional/no problems?External dimensions W:448 H:160 D:441mm?Weight 28kg Shipping We ship using FedEx, DHL and Japan Post. Payment We usually ship within 10 business days of receiving cleared payment. . International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Description*Please see the photos and buy only if you are satisfied with the item.Product Description: -Sansui-Reference Amplifier-Model number Au-?907i Mos Limited -Accessories None -Standard used item-Perfectly functional/no problems -External dimensions W:448 H:160 D:441mm-Weight 28kgIf you have any concerns about the product, please contact us directly.ShippingItem will be shipped via FEDEX.Please allow 5 business days for handling time.Shipping from Japan.It takes approximately 4 to 7 days for the product to arrive it is shipped.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

At our business, all used items are directly purchased from trusted consumers or authorized sellers. This ensures the provenance and quality of each product. We strictly adhere to the following practices: Legal Compliance: The products we handle comply with the Lanham Act, Common Law infringement, Unfair Competition Prevention Laws, and equivalent laws in other countries. This is because we thoroughly verify the origin and rights of each product, and seek legal advice when necessary. Quality Assurance: We rigorously clean and disinfect all items before listing them for sale and conduct quality control checks. This guarantees that we provide safe, high-quality products to our customers. Transparency and Responsibility: If its brought to our attention that any of our listings may violate the aforementioned laws, we will promptly investigate and take the necessary actions. Moreover, we commit to promptly correcting any misinformation and maintaining transparency. Handling of Misinformation: While we strive for accuracy, there may be instances of unintentional misinformation due to human error. If you encounter such issues, please contact our administration. We promise to address your concerns with courtesy and professionalism. Customer Engagement: We always respond courteously and promptly to customer feedback and inquiries. We are committed to ensuring that our customers can shop with confidence and enjoyment. If you have any questions or concerns about our products, please do not hesitate to contact us.

At our business, all used items are directly purchased from trusted consumers or authorized sellers. This ensures the provenance and quality of each product. We strictly adhere to the following practices: Legal Compliance: The products we handle comply with the Lanham Act, Common Law infringement, Unfair Competition Prevention Laws, and equivalent laws in other countries. This is because we thoroughly verify the origin and rights of each product, and seek legal advice when necessary. Quality Assurance: We rigorously clean and disinfect all items before listing them for sale and conduct quality control checks. This guarantees that we provide safe, high-quality products to our customers. Transparency and Responsibility: If its brought to our attention that any of our listings may violate the aforementioned laws, we will promptly investigate and take the necessary actions. Moreover, we commit to promptly correcting any misinformation and maintaining transparency. Handling of Misinformation: While we strive for accuracy, there may be instances of unintentional misinformation due to human error. If you encounter such issues, please contact our administration. We promise to address your concerns with courtesy and professionalism. Customer Engagement: We always respond courteously and promptly to customer feedback and inquiries. We are committed to ensuring that our customers can shop with confidence and enjoyment. If you have any questions or concerns about our products, please do not hesitate to contact us.

At our business, all used items are directly purchased from trusted consumers or authorized sellers. This ensures the provenance and quality of each product. We strictly adhere to the following practices: Legal Compliance: The products we handle comply with the Lanham Act, Common Law infringement, Unfair Competition Prevention Laws, and equivalent laws in other countries. This is because we thoroughly verify the origin and rights of each product, and seek legal advice when necessary. Quality Assurance: We rigorously clean and disinfect all items before listing them for sale and conduct quality control checks. This guarantees that we provide safe, high-quality products to our customers. Transparency and Responsibility: If its brought to our attention that any of our listings may violate the aforementioned laws, we will promptly investigate and take the necessary actions. Moreover, we commit to promptly correcting any misinformation and maintaining transparency. Handling of Misinformation: While we strive for accuracy, there may be instances of unintentional misinformation due to human error. If you encounter such issues, please contact our administration. We promise to address your concerns with courtesy and professionalism. Customer Engagement: We always respond courteously and promptly to customer feedback and inquiries. We are committed to ensuring that our customers can shop with confidence and enjoyment. If you have any questions or concerns about our products, please do not hesitate to contact us.

Item TitleSansui Au-607 Mos Premium Integrated Lifier 15Th Anniversary Limited Production Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Model number: AU-?607 MOS PREMIUN Effective output: 55W+55W(6?) 45W+45W(8?) play frequency Power amplifier section: DC ~ 300kHz +0dB, -3dB Preamp section: Phono MM: 20Hz ~ 20kHz ±0.2dB / CD, Tuner, Line, Tape/DAT-1, 2, 3: DC ~ 200kHz +0dB, -3dB sensitivity Power amplifier section: 1V/5k? (1kHz) Preamplifier section: Phono MM: 2.5mV/47k?, Phono MC: 300?V/100?, CD, Tuner, Line, Tape/DAT-1, 2, 3: 150mV/20k? S/N ratio Power amplifier section: 120dB or more Preamplifier section: Phono MM: 88dB or more, Phono MC: 70dB or more CD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or more Power consumption (W) 160W Features/Notes An integrated amplifier made to commemorate the 15th anniversary of the 607 series. There are scratches and dirt on the main body. Scratches on the front (near POWER AMP DIRECT) For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product description An integrated amplifier created to commemorate the 15th anniversary of the 607 series. ?The power stage uses a pair of 2SK405/2SJ115 MOS FETs capable of high-speed amplification, and the advanced ?-X balance circuit brings out the capabilities of the elements to achieve high stability and delicate expressive power. . The advanced ?-X balance circuit has a structure in which dedicated amplifiers are installed on the + and - sides of the output, and the push-pull method uses a total of four amplifiers to drive the speakers from both directions, making the circuit itself immune to external noise. Common mode distortion is canceled. Furthermore, by combining it with a NEW diamond differential circuit that can instantaneously supply large currents, it achieves low impedance, clean, and excellent operating characteristics. ?The power supply section uses a newly developed power transformer and electrolytic capacitor, and has a closed-loop configuration in which the power supply section is completely independent and separated from the ground, so that music signals generated from power imbalance etc. Reduces the negative impact on -The chassis uses reinforced twin monaural construction. In this structure, the power supply section consisting of a power transformer and an electrolytic capacitor is placed in the center, and the power units are arranged symmetrically. This achieves an ideal weight balance and effectively prevents sound quality deterioration due to the amplifiers natural vibrations generated from the power supply system and signal system. -Introduced isolated mechanical feedback to analyze and effectively control vibration transmission paths and magnetostriction sources. This method uses a large amount of pure copper isolation parts, which have high internal loss and excellent vibration absorption ability, and is used for power and signal systems such as between the transformer and chassis, the MOS FET mounting area, and the master volume fixing area. Vibration, resonance, and magnetostriction are thoroughly eliminated in all parts including the beginning. ?The quality of the parts has been carefully considered, and we have adopted parts that are non-magnetic, vibration-proof, low impedance, and high-speed, such as specially designed power transformers and electrolytic capacitors. . -Equipped with a power amplifier direct function that inputs high-output digital music signals directly to the power amplifier section. Additionally, in order to achieve high-purity transmission and amplification, it is equipped with a balanced input terminal in addition to the normal input terminal. Equipped with source power direct, all line input signals can be transmitted to the power amplifier with one touch without passing through any accessory functions. Equipped with a recording selector function, even if you connect a CD player directly to the power amplifier, you can back-record other sources while listening. For example, while listening to the input source in Normal 1, you can record another source such as a CD in Normal 2. - Equipped with a phono equalizer for MC/MM cartridges. - There are 11 input terminals, all of which use gold-plated terminals. - A 6-unit detent volume is used for the volume, and the volume knob is machined from aluminum. -Equipped with real side wood.?The power cable uses a power cord with polarity indication. - Equipped with an AC outlet. -There were two color variations: gold and black. ?Main specifications Model integrated amplifier Effective output (10Hz to 20kHz, Both channels operate simultaneously) 55W+55W(6?) 45W+45W(8?) Total harmonic distortion rate (at effective output) 0.008% or less (8?) Cross modulation distortion rate 0.008% or less (8?) Damping factor 150(8?) Frequency characteristics (1W) DC ~ 300kHz +0dB, -3dB Input sensitivity/impedance 1V/5k?(1kHz) SN ratio (A network) 120dB or more Dynamic power 70W (6?) 85W (4?) 90W (2?) TIM distortion (SAWTOOTH) below measurement limit value Slew rate 180V/?sec Rise time 0.6?sec Input sensitivity/impedance (1kHz) Phono MM:2.5mV/47k? Phono MC:300?V/100? CD, Tuner, Line, Tape/DAT-1, 2, 3: 150mV/20k? Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mV Frequency characteristics (1W) Phono MM:20Hz~20kHz ±0.2dB CD, Tuner, Line, Tape/DAT-1, 2, 3: DC ~ 200kHz +0dB, -3dB SN ratio (A network) Phono MM:88dB or more Phono MC:70dB or more CD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or more Tone control Bass maximum variation: ±6dB (50Hz)Treble maximum change: ±6dB (15kHz) Subsonic filter 16Hz(-3dB), 6dB/oct Loudness +4dB(50Hz), +4dB(10kHz) Rated power consumption 160W External dimensions Width 460x Height 159x Depth 446mm Weight 18.8kg ?The condition of the product is slightly scratched and dirty. Operation has been confirmed as shown below. Maintenance details ?Disassembly and cleaning of volume/switches ?Semi-fixed resistance (for bias, DC adjustment) ?Cleaning and adjustment of board ?Cleaning inside and outside ?S P relay cleaning ?RCA (input) connector polishing ?Speaker terminal cleaning ?Volume check ?12 hour aging For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Product descriptionAn integrated amplifier created to commemorate the 15th anniversary of the 607 series.?The power stage uses a pair of 2SK405/2SJ115 MOS FETs capable of high-speed amplification, and the advanced ?-X balance circuit brings out the capabilities of the elements to achieve high stability and delicate expressive power. .The advanced ?-X balance circuit has a structure in which dedicated amplifiers are installed on the + and - sides of the output, and the push-pull method uses a total of four amplifiers to drive the speakers from both directions, making the circuit itself immune to external noise. Common mode distortion is canceled. Furthermore, by combining it with a NEW diamond differential circuit that can instantaneously supply large currents, it achieves low impedance, clean, and excellent operating characteristics.?The power supply section uses a newly developed power transformer and electrolytic capacitor, and has a closed-loop configuration in which the power supply section is completely independent and separated from the ground, so that music signals generated from power imbalance etc. Reduces the negative impact on-The chassis uses reinforced twin monaural construction.In this structure, the power supply section consisting of a power transformer and an electrolytic capacitor is placed in the center, and the power units are arranged symmetrically. This achieves an ideal weight balance and effectively prevents sound quality deterioration due to the amplifiers natural vibrations generated from the power supply system and signal system.-Introduced isolated mechanical feedback to analyze and effectively control vibration transmission paths and magnetostriction sources.This method uses a large amount of pure copper isolation parts, which have high internal loss and excellent vibration absorption ability, and is used for power and signal systems such as between the transformer and chassis, the MOS FET mounting area, and the master volume fixing area. Vibration, resonance, and magnetostriction are thoroughly eliminated in all parts including the beginning.?The quality of the parts has been carefully considered, and we have adopted parts that are non-magnetic, vibration-proof, low impedance, and high-speed, such as specially designed power transformers and electrolytic capacitors. . -Equipped with a power amplifier direct function that inputs high-output digital music signals directly to the power amplifier section.Additionally, in order to achieve high-purity transmission and amplification, it is equipped with a balanced input terminal in addition to the normal input terminal.Equipped with source power direct, all line input signals can be transmitted to the power amplifier with one touch without passing through any accessory functions.Equipped with a recording selector function, even if you connect a CD player directly to the power amplifier, you can back-record other sources while listening. For example, while listening to the input source in Normal 1, you can record another source such as a CD in Normal 2.- Equipped with a phono equalizer for MC/MM cartridges.- There are 11 input terminals, all of which use gold-plated terminals.- A 6-unit detent volume is used for the volume, and the volume knob is machined from aluminum.-Equipped with real side wood.?The power cable uses a power cord with polarity indication.- Equipped with an AC outlet.-There were two color variations: gold and black.?Main specificationsModel integrated amplifierEffective output (10Hz to 20kHz,Both channels operate simultaneously) 55W+55W(6?) 45W+45W(8?)Total harmonic distortion rate (at effective output) 0.008% or less (8?)Cross modulation distortion rate 0.008% or less (8?)Damping factor 150(8?)Frequency characteristics (1W) DC ~ 300kHz +0dB, -3dBInput sensitivity/impedance 1V/5k?(1kHz)SN ratio (A network) 120dB or moreDynamic power 70W (6?) 85W (4?) 90W (2?)TIM distortion (SAWTOOTH) below measurement limit valueSlew rate 180V/?secRise time 0.6?secInput sensitivity/impedance (1kHz) Phono MM:2.5mV/47k?Phono MC:300?V/100?CD, Tuner, Line, Tape/DAT-1, 2, 3: 150mV/20k?Phono maximum allowable input MM (THD 0.01%): 210mV MC (THD 0.1%): 21mVFrequency characteristics (1W) Phono MM:20Hz~20kHz ±0.2dBCD, Tuner, Line, Tape/DAT-1, 2, 3: DC ~ 200kHz +0dB, -3dBSN ratio (A network) Phono MM:88dB or morePhono MC:70dB or moreCD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or moreTone control Bass maximum variation: ±6dB (50Hz)Treble maximum change: ±6dB (15kHz)Subsonic filter 16Hz(-3dB), 6dB/octLoudness +4dB(50Hz), +4dB(10kHz)Rated power consumption 160WExternal dimensions Width 460x Height 159x Depth 446mmWeight 18.8kg?The condition of the product is slightly scratched and dirty.Operation has been confirmed as shown below.Maintenance details?Disassembly and cleaning of volume/switches?Semi-fixed resistance (for bias, DC adjustment)?Cleaning and adjustment of board?Cleaning inside and outside?S P relay cleaning?RCA (input) connector polishing?Speaker terminal cleaning?Volume check?12 hour agingFor remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

[Used] SANSUI Sansui Denki AU-?907i MOS LIMITED Integrated Amplifier (Reference Amplifier) ??40th Anniversary Model[Manufacturer name] SANSUI[Product description]Since this is a used item, there may be some scratches due to use, but it is a product that can be used without any problems.The images are for illustrative purposes only, so the condition of the product and the presence or absence of accessories may vary each time the product arrives.At our store, we perform operation checks, inspections, and cleaning with alcohol, etc.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

[Used] SANSUI Sansui Denki AU-?907i MOS LIMITED Integrated Amplifier (Reference Amplifier) ??40th Anniversary Model [Manufacturer name] SANSUI [Product description] Since this is a used item, there may be some scratches due to use, but it is a product that can be used without any problems. The images are for illustrative purposes only, so the condition of the product and the presence or absence of accessories may vary each time the product arrives. At our store, we perform operation checks, inspections, and cleaning with alcohol, etc. For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

Operation performed here, condition of goods and accessories]. CD TUNER LINE TAPE1 2 input was possible. There are scratches, dirt, peeling, and rust. Please be sure to look at the pictures before bidding, as it is subjective. The only accessory is the power cord. KAWAII Music-MovieTREASURE NOTES Please check the Photo.We will answer your questions promptly. Feel free to !!You can add multiple products to the cart and set them to be included. Please contact !{!!!}All the products we handle are products released in Japan.Make sure you can play with the playback device you have. PAYMENT POLICYWithin 96 hours after purchase and successful bid. We ships from Japan this product.Import duties,taxes,and charges are not included in the item price or shipping cost.please note that tariffs may be higher in some countries.These caharges are the Buyers responsibillity.please check with your countrys customs office to detemine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as giftsWe will declare the price of the unit, excluding shipping. SHIPPING POLICY Handling Time : 10 business days after payment Shipping Method : FedEX Express Shipping Duration : 13-20 Days Cost : $FREERETURN POLICY You can return in 60 days.Return cost willbe Sellers responsibility. CONTACT DETAILS We will always try to solve problem so please contact us before you open a case. Stock No. -

Plese Check Photo and Discription.Please feel free to message me if you have any concerns. Manufacturer / Model No. SANSUI AU-?607 MOS PREMIUM(15th anniversary limited production) Accessories Input short pin x2 Condition Maintenance operation confirmed. Output interruption/noise repair (output relay disassembly contact improvement/INPUT-SELECTOR contact improvement) DC balance adjustment (HOT-GND/HOT-COLD), BIAS check, LR output VR transition check Repair broken electrolytic capacitor fixing bracket (tighten and fix stainless steel flexible band) Repair broken shaft of SOURS-DIRECT SW (Stud bolt processing/evoxy adhesion) Repaired scratches on the wood side panel and painted it clear (slightly darker finish than the original) There is a slight eccentricity in the TAPE-PLAY SW. There are some scratches on the front and top panels. It has been serviced and maintained in our store. All parts are in good working order. About the item SANSUI AU-?607 MOS Premium ¥138,000 (introduced in 1991) This integrated amplifier was made to commemorate the 15th anniversary of the 607 series. The power stage uses a pair of 2SK405/2SJ115 MOS FETs for high-speed amplification, The advanced ?-X balanced circuitry allows the devices to demonstrate their full potential, resulting in a high degree of stability and delicate expressiveness. The advanced ?-X balanced circuit is structured with dedicated amplifiers on the + and - sides of the output, This push-pull system drives the speakers with a total of four amplifiers from both directions, The circuit itself cancels external noise and common-mode distortion. In addition, the new diamond differential circuit, which is capable of supplying instantaneous high current, is combined with the The power supply unit is equipped with a newly developed power supply unit. The power supply section uses a newly developed power transformer and electrolytic capacitors, Furthermore, the power supply section is completely independent and separated from the ground in a closed-loop configuration, The power supply section is completely independent from the grounding, and is of a closed-loop configuration to prevent unbalance of the power supply from adversely affecting the music signal. The chassis structure adopts a reinforced twin monaural construction. In this construction, the power supply unit consisting of the power transformer and electrolytic capacitors is placed in the center, and the power units are symmetrically positioned on both sides. This provides an ideal weight balance and effectively prevents sound quality degradation caused by the amplifiers inherent vibrations generated by the power and signal systems. This effectively prevents sound quality degradation caused by the amplifiers inherent vibrations from the power and signal systems. The transmission paths of vibration and sources of magnetic distortion are analyzed and effectively controlled, Isolated mechanical feedback is used to analyze and effectively control the transmission paths and sources of magnetic distortion. This method uses a large number of isolation parts made of pure copper, which has high internal loss and excellent vibration absorption capability, Isolation parts are used between the transformer and chassis, MOS FET mounting points, master volume fixing points, and so on, Vibration, resonance, and magnetic distortion are thoroughly eliminated in every part of the power and signal systems, including between the transformer and chassis, the MOS FET mounting points, and the master volume fixing points. The parts are carefully selected for their quality, including the power transformer and electrolytic capacitors of special specifications, The parts are non-magnetic, anti-vibration, low-impedance, and high-speed. The power amp direct function allows direct input of high-output digital music signals to the power amp section. In addition to the normal input terminal, a balanced input terminal is also provided for high-purity transmission and amplification. The source power direct function allows all line input signals to be transmitted to the power amplifier with a single touch without passing through any accessory functions. The source power direct function allows all line input signals to be transmitted to the power amplifier with a single touch, without passing through any accessory functions. The rec selector function allows you to connect a CD player to the power amp direct, Background recording of other sources is possible while listening. For example, while listening to a source input on Normal 1, Normal 2 can be used to record another source, such as a CD, while listening to the input source on Normal 1. Phono equalizers are provided for MC and MM cartridges. Model: Integrated amplifier Effective output (10Hz to 20kHz, both channels operating simultaneously): 55W+55W (6?), 45W+45W (8?) Total harmonic distortion (at RMS output): 0.008% or less (8 ohms) Modulation distortion: 0.008% or less (8 ohms) Damping factor: 150 (8 ohm) Frequency response (1W): DC to 300kHz +0dB, -3dB Input sensitivity/impedance: 1V/5k?(1kHz) SN ratio (A-network): 120dB min. Dynamic power: 70W (6?), 85W (4?), 90W (2?) TIM distortion (SAWTOOTH): Below measurement limit Slew rate: 180V/?sec Rise time: 0.6?sec Input sensitivity/impedance (1kHz): Phono MM: 2.5mV/47k?, Phono MC: 300µV/100?, CD, Tuner, Line, Tape/DAT-1, 2, 3: 150mV/20k? Phono maximum allowable input: MM(THD 0.01%):210mV, MC(THD 0.1%):21mV Frequency response (1W): Phono MM: 20Hz to 20kHz ±0.2dB, CD, Tuner, Line, Tape/DAT-1, 2, 3: DC to 200kHz +0dB, -3dB SN ratio (A-network): Phono MM: 88dB or better, Phono MC: 70dB or better, CD, Tuner, Line, Tape/DAT-1, 2, 3: 110dB or better Tone control: Bass max. change: ±6dB(50Hz), Treble max. change: ±6dB(15kHz) Subsonic filter: 16Hz(-3dB), 6dB/oct Loudness: +4dB(50Hz), +4dB(10kHz) Rated power consumption: 160W Dimensions: W 460 x H 159 x D 446mm Weight: 18.8kg SHIPPING?FedEx DHL or Japan Phost?From JapanPackages usually leave our warehouse within 10 days of payment.Weekend orders will ship on Monday or Tuesday.We provide valid Tracking Numbers for all orders. We will ship via FedEx. We can also ship by Japan Post. Please contact me prior to purchase if you wish to ship by Japan Post. PEYMENTS?PayPal?Debit?Cards?Credit?CardsWe ship within 48hours of payment.We Ship Within10 Days of Payment. RETURN INFORMATION?Exchabge possible within 30 days.?If you Have any Problems, Please Contact us in Advance Customoms Duty?Import duties, taxes, and charges are not included in the item price or shipping cost.?These charges are the buyers responsibility.? Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

There are small scratches and dirt overall. As shown in the last photo, the scratches on the front are clearly visible when light is applied. The volume is not functioning well, and the sound of one channel or both channels may come and go. It seems to be a common problem, but since I cannot fix it, I will list it as junk. I will send it in the original box along with the catalog at that time (with creases and dirt). Check out other items on our store Kodawarimax_Golf & Kodawarimax_Hobbies Kindly verify item availability prior to completing your purchase. While we diligently update our inventory on a daily basis, certain products may be sold through local channels within the interim 24-hour period. Always let us know the item what you are looking for. we will do our best to find it for you!SHIPPING & RETURN POLICY Fedex or DHL with a tracking number. *When we use Japan Post, we will tell you before handThere is NO Shipping on Weekends and HolidaysWe always send the item to the address your registered on Ebay to ensure the security of the item. If you have changed your address, we will not be responsible for lost packageINTERNATIONAL BUYERS _ PLEASE NOTE:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. We NEVER mark merchandise value below the selling value or mark items as GiftsInternational government regulations prohibit such behaviorr

?Description?Please check the photos. only a main part Operation has been confirmed As a used item, there are no noticeable scratches and the overall condition is clean and satisfactory. Your questions and comments are more than welcome. ?Shipping?Shipping MethodFedex or DHL All shipping methods will provide a tracking number. Please read this before you buy the product. And please understand what we can.I only send the item to the address on eBay. ?Payment?Please pay within 5 days after auction is finished. ?About US?A specialty shop offering a wide variety of carefully selected Japanese brand items. Unless marked used all of our inventory is brand new, so you can feel confident about your purchase. Even if you think to yourself, But the item I want is only available in Japan., make sure to consult with us before giving up hope. We will look for and suggest the best products on your behalf. Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them with additional shipping charges. When exceeding 30 days after receiving an item, the return is impossible.Money back guarantee within 30 days if returned by customer. Refund of a shipping cost is not performed.The return shipping is also the buyer will pay

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments. Shipping discounts are available for multiple purchases.We now accept more than just PayPal!Condition? MINT

Vintage Sansui AU-07 Anniversary Model With Power Cord Audio Equipment RareInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Vintage Sansui AU-07 Anniversary Model With Power Cord Audio Equipment RareInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.