FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.

ACHTUNG: Das Geschäft befindet sich an der Heeper Str. 42, 33607 Bielefeld ####### Für weitere Informationen erreichen sie uns unter der 01731590174 #### Sansui SR 212 Plattenspieler Defekt für Bastler Zustand: Allgemeine Gebrauchsspuren wie Kratzer, Tonarm verbogen Tonsystem vorhanden aber Nadel abgenutzt Ohne Haube und Scharnieren Ohne Gummi Teller Riemen ausgeleiert und nicht Original. Technisch: Geschwindigkeiten nicht in Ordnung, lift teils in Ordnung, Teller dreht sich, tonarm liegt in der luft. Wird defekt angeboten. Aufgrund der Umweltverschmutzung Benutze ich gebrauchtes Verpackungsmaterial.

ACHTUNG: Das Geschäft befindet sich an der Heeper Str. 42, 33607 Bielefeld ####### Für weitere Informationen erreichen sie uns unter der 01731590174 #### Sansui SR 212 Plattenspieler Defekt für Bastler Zustand: Allgemeine Gebrauchsspuren wie Kratzer, Tonarm verbogen Tonsystem vorhanden aber Nadel abgenutzt Ohne Haube und Scharnieren Ohne Gummi Teller Riemen ausgeleiert und nicht Original. Technisch: Geschwindigkeiten nicht in Ordnung, lift teils in Ordnung, Teller dreht sich, tonarm liegt in der luft. Wird defekt angeboten. Aufgrund der Umweltverschmutzung Benutze ich gebrauchtes Verpackungsmaterial.

ACHTUNG: Das Geschäft befindet sich an der Heeper Str. 42, 33607 Bielefeld ####### Für weitere Informationen erreichen sie uns unter der 01731590174 #### Sansui SR 212 Plattenspieler Defekt für Bastler Zustand: Allgemeine Gebrauchsspuren wie Kratzer, Tonarm verbogen Tonsystem vorhanden aber Nadel abgenutzt Ohne Haube und Scharnieren Ohne Gummi Teller Riemen ausgeleiert und nicht Original. Technisch: Geschwindigkeiten nicht in Ordnung, lift teils in Ordnung, Teller dreht sich, tonarm liegt in der luft. Wird defekt angeboten. Aufgrund der Umweltverschmutzung Benutze ich gebrauchtes Verpackungsmaterial.

FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.

Vintage Technics Turntable SL-BD26 part: RUBBER PLATTER MAT. Very nice condition. Tested working. Please look at the 12 pictures closely and judge the condition, size and content of this lot for yourself as our photos are a large portion of our description. If it is not shown in the pictures it is most likely not included in the listing. If you have any questions about the item please ask before you buy and we will answer them promptly (usually within an hour). Buy with confidence. We sell on multiple online market places and have over 60,000 sales with 100% positive feedback. We try to add over twenty unique collectibles and interesting items daily so come back and check us out. We offer free domestic returns on most everything we sell so just message us and ask us for a return shipping label and well email it right out. Once we get the item back well send you a full refund as quickly as possible. Please be aware that we never offer price adjustments for any reason we only offer free returns. .

Verkaufe hier meinen SANSUI Schallplattenspieler, Model SR-212 Dieser ist leider DEFEKT! 1. Er zieht keinen Strom (Wahrscheinlich ist eine Sicherung defekt, hab kein Messgerät...)2. Der RIEMEN ist NICHT vorhanden. Muss also ersetzt werden3. Das kleine hintere Gewicht und Band sind nicht mehr vorhanden4. Der Zustand der Nadel ist UNBEKANNT Diese Auktion richtet sich daher nur an Bastler und auf HIFI-Geräte spezialisierte Menschen/Firmen.Bitte bieten sich NICHT, wenn Sie nicht einer der o.g. Person sind. Ich wiederhole: Das Gerät ist DEFEKT! Der (äußerliche) Zustand des Gerätes ist dafür TOP! VINTAGE vom Feinsten. Bedienungsanleitung vorhanden! MINIMALE Kratzer und Gebrauchsspuren. Versand als versichertes Postpaket -pauschal- : EUR 15,-International Bidders: Please ask for shipping costs BEFORE making a Bid. Thank you! Hab noch nen SANSUI Stereo-Reciever, Modell 661 auf Ebay. Bitte ansehen. Versandkosten immer nur 1x !

Up for sale is this Vtg Sansui SR-212 Record Turntable Rubber Platter Platten Pad Protector with signs of use and wear. Please ask questions before you bid. The buyer will pay $7.95 for packing and shipping to the lower 48 via USPS 1st class Mail. Thanks for looking!!!!

FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.

Up for sale is this WORKING Vtg Original Sansui SR-212 Record Player Turntable Electric Drive Motor with signs of use and wear. Please ask questions before you bid. The buyer will pay $10.95 for packing and shipping to the lower 48 via USPS Priority Mail. Thanks for looking!!!!

FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.

SANSUI SR-212 VINTAGE SEMI-AUTO TURNTABLE IN SUPERB CONDITION * BEAUTIFUL CLASSIC TURNTABLE * EARLY 1970sFULLY SERVICED & RESTORED with NEW AUDIO LEADS, NEW AUDIO TECHNICA AT3600 CARTRIDGE + NEW BELT This is a lovely and well cared for example of a RARE classic 1970s Sansui SR-212 semi-automatic turntable. In my opinion the best looking turntable produced in the early 1970s. It features a user return function and also automatically returns the tonearm at the end of the record which saves the stylus from wearing out by sitting in the run out groove. Not only is it made of carefully chosen precision components but it has been designed with particular emphasis on ease of operation, reliability and tonal quality. It has been extremely well cared for. Even though it has been well cared for, it has probably sat unused for a long time, so has been given a complete restoration and service. Many hours of work go into restoring the turntables to their former glory and ensuring they operate at optimum performance. It comes to you in superb condition, fully serviced and restored and PlugnPlay ready for you to enjoy your vinyl music on arrival. The following work has been carried out on the turntable to prepare it for its new owner The motor was disassembled, old lubrication cleaned and new lubrication added to both the top and bottom bearings.The main centre bearing was fully stripped down, old lubrication cleaned out, a new ceramic bearing and new lubrication added.New foam inserts on the suspension springs to dampen vibrations.The motor spindle was cleaned and polished and set at the right position for correct speed.Thoroughly cleaned inside and out.The inside rim of the platter was cleaned of old belt residue and polished for proper belt grip.The outer rim of the platter was cleaned and polished to a bright finish.Dust cover polished to a high gloss.New drive belt added.New Audio Technica AT-3600L cartridge properly set up with the correct overhang and alignment.New quality RCA connection leadsSpeed checked as steady and accurate on both speeds using a strobe speed disc.I have restored many of these turntables. Please see my feedback for other turntables supplied and buy with confidence. Check out the video below to see this turntable in operation. Watch Video Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] The motor and main bearing have been stripped, cleaned and re-lubricated. A new ceramic bearing was used in the main spindle bearing. These are harder and smoother than their steel equivalents. Both run freely and silently. New damping foam was added to the suspension springs. The motor spindle and inside of the platter rim have been cleaned and a new belt fitted. The unit has been thoroughly cleaned inside and out. Finally, a brand new Audio Technica ST 3600L cartridge has been mounted, set up with the correct overhang and alignment. The tracking force has been set at 2g and the cartridge performs brilliantly. All settings have been set to provide the optimum sound reproduction. The turntable comes supplied with new quality audio leads and grounding cable for connection to your amplifier. Finally this comes with a printed instruction booklet. The work completed will ensure many years of enjoyable listening. This turntable is in superb condition cosmetically. The plinth is solid and the veneer is virtually new condition. The metal work has all been polished and is bright and shining. The lid has been polished to a high gloss. There are still a few light scratches but it looks impressive despite its age. These turntables were all about the sound and this one delivers. It has been sound tested through a Pioneer SX-434 amplifier and produces a rich listening experience. As with all vintage turntables you will need an amplifier with dedicated phono inputs, or you will need to run it through a phono stage pre-amp into the AUX connection of your amplifier. The turntable will arrive well packaged and will be delivered by Parcelforce, fully insured. The platter and mat will be removed and packed separately under the unit to prevent it causing damage. The cartridge, tonearm weight and any accessories will also be packaged separately for safety. The plinth will be secured with transit screws. Set up is fast and easy by following the quick set up guide I will include, as well as the printed instructions. UK Shipping only. I will not send to parcel collection hubs in local shops as they reject the delivery due to the size and weight of the box. This causes all sorts of delivery problems and incurs additional re-delivery costs. Please arrange delivery to a residential address or your workplace address. Specifications of the Sansui SR-212 Turntable Type: semi-automatic turntable Drive method: belt drive Motor: 4-pole synchronous Speeds: 33 and 45rpm Wow and flutter: 0.08% WRMS Signal to noise ratio: 45dB Platter: 300mm aluminium die-cast Tonearm: static balance type, pipe arm (s-shaped) Effective length: 215mm Overhang: 10mm Usable cartridge weight: 4 to 10g Dimensions: 442 x 352 x 166mm Weight: 6.7kg

FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.

Sansui SR 212 auto return record player. In very good condition from smoke & pet free home. Part of my lovely vintage setup. In my opinion one of the best looking and performing (mid range) turntable. 2 tiny marks on wood veneer(see last photo for detail). Collection ONLY. Note:.seller away till mid.September

Anti skate weight for the tonearm of the Sansui SR 212 turntable. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

FACTORY OEM SANSUI COUNTERWEIGHTFits Sansui SR-212 SEE PHOTOS FOR DETAIL.