Heavyweight main weight W-7H for /SAEC WE-407/23. This is a used item. It is in good condition with no noticeable scratches/dirt, and is a beautiful product. Please understand the rubbing / small scratches etc. associated with use. There are no accessories other than the photograph.

Description SAEC WE-308 tonearm for professional USED Excellent condition[Condition]USED:Excellent conditionoperation confirmedFeatures/remarksAchieves extremely high tracing performance by adopting double knife edge bearingsA high-precision direct-reading system is used for the stylus pressure adjustment device. Comes with a low capacitance cable Please refer to the pictures for more details. Please check the photos and dont hesitate to ask any questions about the item !Thank you.Shipping[ Method ] FEDEXShipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. We will ship your item within 5 business days, after your payment. Terms of SaleHello, As I have earned only a few feedbacks, you may be very worried to bid my auction. However, I will provide courteous and responsive service. If you are looking for a particular item that is not in my listing, please do not hesitate to contact me. I will look it for you.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying

Condition DescriptionVery good condition Description Used product State OK Very beautiful state. No noticeable scratches or stains. Please check the image. Policy ShippingPlease allow me 8~10days shipping after your payment. I will ship the item with tracking number.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We will reply to your question or invoice within 3 days. We cant not reply gifts or unreasonable requests such as declared amount. Please notePaymentImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.

SAEC WE-308SX tonearm for professional. It is upgrade of WE-308N tonearm. It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Armbase lock nut is not included. Specification: A tonearm with a double knife edge structure. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. The WE-308SX uses hard ruby for the bearing contacts to improve sensitivity and prevent aging. Concealment is achieved by strengthening the knife edge part and around the axis of the edge receiver. Crosstalk is improved by 20dB in fo by mounting a mechanical equalizer. It is equipped with a lateral balancer and an automatic stylus pressure slight increase mechanism. Form double knife edge static balance, universal type Total length 329mm Effective length 240mm Overhang 5mm Tracking error 0° at inner circumference Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) 18.3g to 40.0g (both shell and when using auxiliary weight W-2) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 30?mm Arm mounting method Nut tightening (arm stabilizer AS-500E sold separately) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Condition DescriptionFully operational double knife edge arm. ?Condition: Each part has been polished/cleaned. Dullness remains on the arm body and main weight, There are no noticeable scratches and it is in a glossy state. There are no dents/bends on the pipe. In addition, large damage is not seen in accessories such as cables. ? Operation? We have confirmed the operation of our equipment. ?Output from both channels ?Descent speed of the lifter (Oil replenished) ? Each adjustment point, operation feeling ?Height adjustment, etc. There is no problem in operation. ?Accessories ?Main weight ?Lateral weight ?Inside force canceller weight ?Head shell (SAEC) ?PHONO cable (SAEC) ?Mounting nut/washer ?Instruction manual (copy) ?Mounting card (copy) ? commodity contents Manufacturer: SAEC Model number: WE-308L Total length: 367.5mm Effective length: 270mm Tracking error: 0° at inner circumference Stylus pressure adjustment range: 0 to 4g (2 rotations, direct reading) Mounting hole diameter: 30?mm Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

100% Authentic! All packages are shipped directly from Japan!Condition DescriptionFeatures and Remarks Tone arm designed for studio use to always provide the best performance Features & Remarks Overall length: 392mm, Effective length: 295mm Features / Remarks There are some signs of use, such as age-related spots. Features / Remarks Comes with ortofon tone arm cable 6NX-TSW1010. It was new, but has been used for operation check. Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingWe only ship to the registered address in (Paypal / eBay). The item will be shipped from Japan.International BuyersImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SAEC WE-308 tonearm for professional Superb Condition With Cable. Tested Working

SAEC WE-308L Silver Long Tone Arm Working Used Japan DescriptionUsedShippingFedEx or UPS or Japan PostInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

SAEC WE-308 series W-2 W-2L sub weight 38g record player SAEC tone arm WE-308 series This is a production sub weight 38g (1 piece). Applicable main weight is W-2 W-2L Become. *Images 1 and 5 are examples of W-2 weights installed. Main weight is not included. ?Size image reference Inner diameter matches counterweight shaft diameter Weight matched to W-2L sub weight 38g ?Material (using non-magnetic material) Sub weight: SUS304 Stopper: Brass (C3604) *Brass screw with a flat tip that is gentle on the shaft Easy-to-use flathead screw *Uses non-magnetic material suitable for audio ?Condition See image *As this is a manufactured product, there may be lathe marks and chuck scratches. There are cases where this happens. note that ?How to use With shell + heavy cartridge Use when zero balance cannot be achieved Please check the stylus pressure with a precision meter. Please use it in the same way as the original. *Because it is a weight ring type, it can be used as the main weight. You can put it on and move it back and forth. Nothing except those in the photo comes with the product.All items are shown in it. Should you have any questions please feel free to contact us at anytime ! This item is 100% authentic, Japanese goods. Please be assured that we package each item carefully without causing damage.DescriptionWe will ship the card in waterproof packaging to prevent damage to the card during packaging.Please do not cancel after purchase to prevent replacement. PaymentSupports managed paymentsPlease pay within 5 days after auction is finished. About UsWe are located in Japan.Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items, please feel free to ask us. International Buyers - Please Note:-Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.

Top class of SAEC tonearm manufactured for professional, model 506/30. It is long version of WE-407 tonearm. Very good working condition. Tonearm come with original cable, arm rest... Very very rare long version tonearm of SAEC, it is really hard to get even in Japan market. Original cable anti-skating weight, lateral weight, counter weight, lock nut are included as a part of auction. You can use item right after it comes to your hand. Specification: A tonearm designed to always deliver the best performance for studio use. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. In WE-506/30, hard ruby is used for the contact part of the bearing, which enhances sensitivity and prevents deterioration over time. A special light alloy produced by French aviation technology is adopted as the arm pipe. The mechanical equalizer is carried. A lateral balancer and an automatic stylus pressure slight increase mechanism are carried. Form double knife edge static balance, universal type Total length 392mm Maximum length 417mm Effective length 295mm Overhang 9mm Tracking error 0° at inner circumference Offset angle 15° Lateral balance Slide balance type with direct reading adjustment scale Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 42?mm (axis diameter 40?mm) /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Template CDGSlightly scratched and dirtyBLU Description SAEC WE-317 tone arm genuine shell/CX-5006A PHONO cable etc. included SAEC Double Knife Edge Static Balanced Tonearm WE-317Demonstrates great power for ultra-high compliance cartridges and ultra-light stylus pressure performances.Compared to the WE-407/23, which boasts a deep-rooted popularity, I think it is an arm with a high rarity. ?Condition: Each part has been polished/cleaned. There is no noticeable damage to the arm and it is glossy and beautiful.Accessories such as shells/weights/cables are also in good condition.Considering the age, we will judge it as a beautiful product. It will be a second-hand product that has passed the years.Please understand that there are some scratches/dullness/feeling due to aging/use. ? Operation?We have confirmed the operation of our equipment.?Output from both channels?Descent speed of the lifter (Oil replenished)? Each adjustment point, operation feeling?Height adjustment, etc.There is no problem in operation. ? commodity contentsManufacturer: SAECModel number: WE-317 Product detailshttp://20cheaddatebase.web.fc2.com/needie/NDSAEC/WE-317.html ?Accessories?Main weight?Lateral weight?Inside force canceller weight?Headshell (SAEC ULS-2X)?Lead wire x 4?PHONO cable (SAEC CX-5006A)?Instruction manual (original)?Arm mounting position gauge (copy)?Nut/Washer Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

SAEC WE-308 Tone Arm Vintage 1971 JAPAN USED TESTEDDescription The first tone arm from Audio Engineering Corp. (now SAEC Commerce). SAEC is the name derived from the initials of Sound of Audio Engineering Corp. The newly developed double knife-edge bearing eliminates rattling of the bearing, which is a drawback of the conventional knife-edge type. This enables extremely high tracing performance from high needle pressure to light needle pressure. The newly developed automatic needle pressure fine tuning device increases needle pressure as the record moves toward the inner circumference to stabilize the reproduction of high frequencies in the inner circumference of the record. A large oil elevator is used to prevent oil leakage. A high-precision direct-reading needle pressure adjuster is used. Model Tone armType Double knife-edge static balanced,Universal typeOverall length 329mmEffective length 240mmOverhang 5mmTracking error 0 degree at inner circumferenceNeedle pressure 0 to 2gInside force canceller Thread suspension systemHead shell Dead weight: 7.3gKnife-edge knob systemMounting board 2.5mm to 35mmLifter Oil piston elevator Shipping FedEx?or DHLInternational Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

SAEC WE-308SX tonearm for professional. It is upgrade of WE-308N tonearm. It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Armbase lock nut is not included. Specification: A tonearm with a double knife edge structure. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. The WE-308SX uses hard ruby for the bearing contacts to improve sensitivity and prevent aging. Concealment is achieved by strengthening the knife edge part and around the axis of the edge receiver. Crosstalk is improved by 20dB in fo by mounting a mechanical equalizer. It is equipped with a lateral balancer and an automatic stylus pressure slight increase mechanism. Form double knife edge static balance, universal type Total length 329mm Effective length 240mm Overhang 5mm Tracking error 0° at inner circumference Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) 18.3g to 40.0g (both shell and when using auxiliary weight W-2) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 30?mm Arm mounting method Nut tightening (arm stabilizer AS-500E sold separately) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Description ?Appearance of the item It has a little impression from use on its body but no big damage at all!! There is no problem to use functionally. It is an excellent item. ?Movement check It has been inspected in its movements. No defect has been found. Relaiable to use it! ?Includings Includings are all shown in the photos.. Condition is a personal opinion. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting. Shipping I send a product by FEDEX or EMS. I attach the tracking number. Please bid it without worrying ? Can not be bundled. Returns Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 14 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 14 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden. International Buyers Please Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SAEC WE-308 Tonarm mit Headshell, Headshell Kabeln und Cinch Anschluss Kabeln. Fans wissen sicherlich dass dieser Tonarm mit Doppelmesserlager Prinzip zum Besten gehrt was man im Vinyl Bereich fr das Geld bekommen kann. Der Tonarm wird wie abgebildet geliefert, natrlich ohne Plattenspieler, Plattenteller, Verstrker oder zufllig auf den Bildern gezeigten Objekten.

SAEC S-1 Tonearm Bracket for WE-308 Series Vintage Audio 1978 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use.For other appearances, please refer to the photo. Specification Can be used with 34 to 69 mm thick boards.Weight 1.8kg.Arm mounting hole diameter 27 mm (for WE-308 series) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as ?gifts? -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

eBay listing template by 3Dsellers.com - Try for Free!

Description #This is the SAEC tonearm model WE-308L. #It is a used item in good condition, with no significant scratches or stains. #Please understand that there may be some minor wear and tear, small scratches, or signs of aging due to prior use. #It operates without any issues and has been tested for sound output using my own cartridge and cable. #Both channels provide a good output. #There is no stiffness or sticking in any of the movable parts. All components operate smoothly. #Please note that there are no additional accessories or items included beyond what is shown in the photos. Shipping Shipping Company: FedEx or UPS or Japan POST We will carefully pack your order and deliver it promptly. We will ship your items to your registered address via standard shipping with a tracking number. Your items will be shipped within 10 business days (excluding Saturdays, Sundays, and national holidays) after payment is confirmed. If you wish to have your order shipped together with other items, please let us know. **Additional shipping charges may apply if the delivery company is assigned to a remote area.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Thank you for your understanding.

The triple structure of natural obsidian with high specific gravity and excellent vibration characteristics, viscoelastic material, and wood base provides excellent anti-vibration characteristics. A large insulator with enhanced anti-vibration characteristics is used. Acrylic dust cover is adopted. Plus arm mounting is possible. Model Turntable baseDimensions W560 x H170 x D465mm (including dust cover)Weight 12.0kg (including dust cover)L 218mm?250mmRear of tone arm Within 92mm (when L is 218mm)Within 68mm (when L is 250mm)L: Arm effective length (from the tip of the needle to the axis of rotation)-overhang

Item Description Condition : USED Very GoodOutput from both channelsLifter descent speed (oil replenished)Adjustment points, operating feel, etc.Height adjustment, etc.There is no problem in operation. AccessoriesMain weightLateral weightInside force canceller weightHead shell (SAEC ULS-2X)Lead wires x 4PHONO cable (SAEC CX-5006A)Instruction manual (original)Arm mounting position gauge (copy)Nuts and washers Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

SAEC WE-308 Universal type Tonearm In Excellent ConditionItem Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This tone arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

Template CDGSlightly scratched and dirtyBLU Description Weight weight compatible with cartridges 12.5-42g. For WE-308L *Box and manual included Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.