SAEC WE-308 tonearm for parts. Bearing is tight. What you see is what you get. No returns or complaints please. This is sold for PARTS.

SAEC WE-308L Double Knife Edge Static Balance Type Long Tonearm Pickup Arm #3 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use.For other appearances, please refer to the photo. Specification Overall length: 367.5mmEffective length: 270 mmTracking error: 0 ° on the inner circumferenceNeedle pressure adjustment range: 0-4g (2 rotations, direct reading type)Mounting hole diameter: 30?mm Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as ?gifts? -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SAEC WE-308L Tonearm Working Tested Japan Used Shipping??? Please select the delivery method from the following. Expedited shipping Delivery method : DHL or FedEx or Japan Post *It will arrive in 7-14 days *DHL, FedEx : With Tracking number and insurance. *Japan Post : No Tracking number and insurance. International Buyers - Please Note:??? Important duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with you countrys customs office to determine what these additional costs will be prior to bidding or buying. We wont under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. We will decline to large price reduction offers. Please make offers up to 20%. *Notes (Please read before purchasing.) If the buyers address in a remote location, an additional $25 is required. If the buyer cancels due to personal reasons, 4% of the selling price will be charged as a cancellation fee. Please be careful not to cancel after purchase.

SAEC WE-407/23 W-7M Tonearm Arm Pickup Vintage w/ cable Shipping??? Please select the delivery method from the following. Expedited shipping Delivery method : DHL or FedEx or Japan Post *It will arrive in 7-14 days *DHL, FedEx : With Tracking number and insurance. *Japan Post : No Tracking number and insurance. International Buyers - Please Note:??? Important duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with you countrys customs office to determine what these additional costs will be prior to bidding or buying. We wont under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. We will decline to large price reduction offers. Please make offers up to 20%. *Notes (Please read before purchasing.) If the buyers address in a remote location, an additional $25 is required. If the buyer cancels due to personal reasons, 4% of the selling price will be charged as a cancellation fee. Please be careful not to cancel after purchase.

SAEC WE-506/30 Armrest and lifter set specifically for tonearms Working tested Shipping??? Please select the delivery method from the following. Expedited shipping Delivery method : DHL or FedEx or Japan Post *It will arrive in 7-14 days *DHL, FedEx : With Tracking number and insurance. *Japan Post : No Tracking number and insurance. International Buyers - Please Note:??? Important duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with you countrys customs office to determine what these additional costs will be prior to bidding or buying. We wont under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. We will decline to large price reduction offers. Please make offers up to 20%. *Notes (Please read before purchasing.) If the buyers address in a remote location, an additional $25 is required. If the buyer cancels due to personal reasons, 4% of the selling price will be charged as a cancellation fee. Please be careful not to cancel after purchase.

SAEC ULS-2X Titanium Aluminum Headshell Our price is 100% negotiable! The price only means ASK! Please make an offer and we will give you the best price! Payment PayPal ONLY.Please pay within 5 days after auction is finished. Shipping We ONLY ship to buyers Paypal registered address. ReturnsItems that are faulty beyond the description given on our auction site should be returned for a full refund.Please contact us by e-mail if items delivered are faulty.However, please send the item back to us. About usOur product is 100% authentic! We dispatch items from Japan. We provide our goods and services based on our motto “Your complete satisfaction is our ultimate goal”. Therefore, please rest assured and make your bid with ease. Please Note International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior.

Top class of SAEC tonearm manufactured for professional, model 506/30. It is long version of WE-407 tonearm. Very good working condition. Tonearm come with original cable, ULS-2X headshell, arm rest... Very very rare long version tonearm of SAEC, it is really hard to get even in Japan market. Original headshell ULS-2X, cable anti-skating weight, lateral weight, counter weight, lock nut are included as a part of auction. You can use item right after it comes to your hand. Specification: A tonearm designed to always deliver the best performance for studio use. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. In WE-506/30, hard ruby is used for the contact part of the bearing, which enhances sensitivity and prevents deterioration over time. A special light alloy produced by French aviation technology is adopted as the arm pipe. The mechanical equalizer is carried. A lateral balancer and an automatic stylus pressure slight increase mechanism are carried. Form double knife edge static balance, universal type Total length 392mm Maximum length 417mm Effective length 295mm Overhang 9mm Tracking error 0° at inner circumference Offset angle 15° Lateral balance Slide balance type with direct reading adjustment scale Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 42?mm (axis diameter 40?mm) /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

SAEC WE-308L Concealed Double Knife Edge Static Balance Type Long Tonearm Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished and cleaned for each part. The appearance is a beautiful product without any noticeable scratches.Please refer to the photo. Specifications Type? Double knife edge static balanced universal typeOverall length: 367.5mmEffective length: 270mmOverhang: 5mmCartridge usable range: 12.3g-18.3g (shell included)Tracking error: 0° at inner circumferenceNeedle pressure adjustment range: 0 to 4g (2 turns, direct reading type)Mounting hole diameter: 30?mm Accessories Main WeightLateral weightsInside force canceller weightPHONO cable (SAEC CX-5006A)Head shell (SAEC)Mounting nut/washerInstruction Manual (copy) (Japanese)Mounting card (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SAEC WE-308SX Concealed Double Knife Edge Static Balance Type Tonearm w/ ULS-3X Head shell Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished and cleaned for each part. The appearance is a beautiful product without any noticeable scratches.Please refer to the photo. Specifications Type? Double knife edge static balanced universal typeOverall length: 329mmEffective length: 240mmOverhang: 5mmTracking error: 0° at inner circumferenceCartridge usable range: 23.5g to 33.5g (shell included, with standard weights)Needle pressure adjustment range: 0 to 4g (2 turns, direct reading type)Mounting hole diameter: 30?mmHead shell: ULS-3X (weight 18g) Accessories Main WeightLateral weightsInside force canceller weightHead shell/lead wire (SAEC ULS-3X)PHONO cable (SAEC CX-5006A)Mounting nut/washerInstruction Manual (copy) (Japanese)Mounting card (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SAEC WE-317 Double Knife Edge Static Balance Type Tonearm Pickup Arm Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished and cleaned for each part. The appearance is a beautiful product without any noticeable scratches.Please refer to the photo. Specifications Type?Static balance typeOverall length: 338.5mmRunning length: 235mmOverhang: 13mmNeedle pressure range: 0 to 2.5gArm base hole: 30mmCartridge weight: 14.5 to 21g (including shell) Accessories Main WeightLateral weightsInside force canceller weightHead shell (SAEC ULS-2X)Lead wires x 4Nuts/WashersPHONO cable (SAEC CX-8003)Instruction Manual (copy) (Japanese)Arm mounting position gauge (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SAEC WE-308L Double Knife Edge Long Type Tonearm In Excellent ConditionItem Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This tone arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

DescriptionCondition:Used. There is a feeling of use. Please check the photo for details. ShippingStandard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

SAEC tone arm bracket S-1. It is a used item. It is in good overall condition with no major scratches or stains. Please understand the rubbing and small scratches associated with use. Comes with instruction manual and accessories.

Description SAEC WE-308 tonearm for professional USED Excellent condition[Condition]USED:Excellent conditionoperation confirmedFeatures/remarksAchieves extremely high tracing performance by adopting double knife edge bearingsA high-precision direct-reading system is used for the stylus pressure adjustment device. Comes with a low capacitance cable Please refer to the pictures for more details. Please check the photos and dont hesitate to ask any questions about the item !Thank you.Shipping[ Method ] FEDEXShipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. We will ship your item within 5 business days, after your payment. Terms of SaleHello, As I have earned only a few feedbacks, you may be very worried to bid my auction. However, I will provide courteous and responsive service. If you are looking for a particular item that is not in my listing, please do not hesitate to contact me. I will look it for you.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying

Condition DescriptionVery good condition Description Used product State OK Very beautiful state. No noticeable scratches or stains. Please check the image. Policy ShippingPlease allow me 8~10days shipping after your payment. I will ship the item with tracking number.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We will reply to your question or invoice within 3 days. We cant not reply gifts or unreasonable requests such as declared amount. Please notePaymentImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.

SAEC WE-308SX tonearm for professional. It is upgrade of WE-308N tonearm. It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Armbase lock nut is not included. Specification: A tonearm with a double knife edge structure. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. The WE-308SX uses hard ruby for the bearing contacts to improve sensitivity and prevent aging. Concealment is achieved by strengthening the knife edge part and around the axis of the edge receiver. Crosstalk is improved by 20dB in fo by mounting a mechanical equalizer. It is equipped with a lateral balancer and an automatic stylus pressure slight increase mechanism. Form double knife edge static balance, universal type Total length 329mm Effective length 240mm Overhang 5mm Tracking error 0° at inner circumference Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) 18.3g to 40.0g (both shell and when using auxiliary weight W-2) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 30?mm Arm mounting method Nut tightening (arm stabilizer AS-500E sold separately) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Condition DescriptionFully operational double knife edge arm. ?Condition: Each part has been polished/cleaned. Dullness remains on the arm body and main weight, There are no noticeable scratches and it is in a glossy state. There are no dents/bends on the pipe. In addition, large damage is not seen in accessories such as cables. ? Operation? We have confirmed the operation of our equipment. ?Output from both channels ?Descent speed of the lifter (Oil replenished) ? Each adjustment point, operation feeling ?Height adjustment, etc. There is no problem in operation. ?Accessories ?Main weight ?Lateral weight ?Inside force canceller weight ?Head shell (SAEC) ?PHONO cable (SAEC) ?Mounting nut/washer ?Instruction manual (copy) ?Mounting card (copy) ? commodity contents Manufacturer: SAEC Model number: WE-308L Total length: 367.5mm Effective length: 270mm Tracking error: 0° at inner circumference Stylus pressure adjustment range: 0 to 4g (2 rotations, direct reading) Mounting hole diameter: 30?mm Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

100% Authentic! All packages are shipped directly from Japan!Condition DescriptionFeatures and Remarks Tone arm designed for studio use to always provide the best performance Features & Remarks Overall length: 392mm, Effective length: 295mm Features / Remarks There are some signs of use, such as age-related spots. Features / Remarks Comes with ortofon tone arm cable 6NX-TSW1010. It was new, but has been used for operation check. Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingWe only ship to the registered address in (Paypal / eBay). The item will be shipped from Japan.International BuyersImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SAEC WE-308 tonearm for professional Superb Condition With Cable. Tested Working

SAEC HS 1 Headshell For Turntable Tonearm Cartridge

Top class of SAEC tonearm manufactured for professional, model 506/30. It is long version of WE-407 tonearm. Very good working condition. Tonearm come with original cable, arm rest... Very very rare long version tonearm of SAEC, it is really hard to get even in Japan market. Original cable anti-skating weight, lateral weight, counter weight, lock nut are included as a part of auction. You can use item right after it comes to your hand. Specification: A tonearm designed to always deliver the best performance for studio use. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. In WE-506/30, hard ruby is used for the contact part of the bearing, which enhances sensitivity and prevents deterioration over time. A special light alloy produced by French aviation technology is adopted as the arm pipe. The mechanical equalizer is carried. A lateral balancer and an automatic stylus pressure slight increase mechanism are carried. Form double knife edge static balance, universal type Total length 392mm Maximum length 417mm Effective length 295mm Overhang 9mm Tracking error 0° at inner circumference Offset angle 15° Lateral balance Slide balance type with direct reading adjustment scale Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 42?mm (axis diameter 40?mm) /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Template CDGSlightly scratched and dirtyBLU Description SAEC WE-317 tone arm genuine shell/CX-5006A PHONO cable etc. included SAEC Double Knife Edge Static Balanced Tonearm WE-317Demonstrates great power for ultra-high compliance cartridges and ultra-light stylus pressure performances.Compared to the WE-407/23, which boasts a deep-rooted popularity, I think it is an arm with a high rarity. ?Condition: Each part has been polished/cleaned. There is no noticeable damage to the arm and it is glossy and beautiful.Accessories such as shells/weights/cables are also in good condition.Considering the age, we will judge it as a beautiful product. It will be a second-hand product that has passed the years.Please understand that there are some scratches/dullness/feeling due to aging/use. ? Operation?We have confirmed the operation of our equipment.?Output from both channels?Descent speed of the lifter (Oil replenished)? Each adjustment point, operation feeling?Height adjustment, etc.There is no problem in operation. ? commodity contentsManufacturer: SAECModel number: WE-317 Product detailshttp://20cheaddatebase.web.fc2.com/needie/NDSAEC/WE-317.html ?Accessories?Main weight?Lateral weight?Inside force canceller weight?Headshell (SAEC ULS-2X)?Lead wire x 4?PHONO cable (SAEC CX-5006A)?Instruction manual (original)?Arm mounting position gauge (copy)?Nut/Washer Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

SAEC WE-308SX tonearm for professional. It is upgrade of WE-308N tonearm. It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Armbase lock nut is not included. Specification: A tonearm with a double knife edge structure. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. The WE-308SX uses hard ruby for the bearing contacts to improve sensitivity and prevent aging. Concealment is achieved by strengthening the knife edge part and around the axis of the edge receiver. Crosstalk is improved by 20dB in fo by mounting a mechanical equalizer. It is equipped with a lateral balancer and an automatic stylus pressure slight increase mechanism. Form double knife edge static balance, universal type Total length 329mm Effective length 240mm Overhang 5mm Tracking error 0° at inner circumference Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) 18.3g to 40.0g (both shell and when using auxiliary weight W-2) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 30?mm Arm mounting method Nut tightening (arm stabilizer AS-500E sold separately) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////