SAEC AS-500E Tonearm Stabilizer 500g for WE-308 Series WE-407/23 Tonearm Vintage Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches.There is no original box etc. Heavyweight stabilizer for WE-308 series and WE-407/23.Great for feedback and SN improvement.It produces a clear reproduction sound. Shipping Shipping is only available to the address registered in eBay. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SAEC WE-407/23 tonearm with original cable, manual, headshell It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Tonearm cable is included. Specification: Type: Double knife edge static balance type Total length: 311mm Effective length: 233mm Overhang: 12mm Tracking error: 0° at inner circumference Inside force canceller: Thread-hanging weight system with automatic needle pressure micro-increase mechanism Needle pressure adjustment range: 0-4g (2 rotations, direct reading) Cartridge usage range: 23g-33.5g (with shell, when using standard weight) 6g-10g (with shell, when using auxiliary weight W-7L) 15g-25g (with shell, when using auxiliary weight W-7M) Mounting hole diameter: 30mm (arm shaft diameter: 27cm) Maximum mounting plate thickness: 35mm The double knife edge is a bearing method with no diameter and no resistance. The WE-407/23 has improved processing accuracy, achieving ultra-high precision of less than ±1/500mm. In addition, the latest high-precision processing technology and hand processing, which can be said to be a work of art, have succeeded in miniaturizing the double knife edge, obtaining flexibility for high compliance and lightweight cartridges. In addition to the mechanical equalizer that optimally damps low-frequency resonance, a newly developed mechanical damping mechanism is adopted, and it has succeeded in lowering the Qo without sacrificing critical movement. The bearing part that supports the knife edge is concealed by ultra-precise cutting of hard steel material, and is designed not to shift or float up under any force. It uses a thread-suspended inside force canceller. This mechanism also has Saekus unique automatic needle pressure micro-increase mechanism, which increases the needle pressure as it moves toward the inner circumference of the record. By preventing the needle tip from floating up, especially at the inner circumference, it stabilizes the high range and enables playback with less distortion. The arm pipe is made of a specially treated, high-rigidity light alloy pipe, thoroughly suppressing pipe noise that is unique to metal materials. The main weight is a helicoid type that can apply accurate stylus pressure, and has a built-in damping mechanism that absorbs external vibrations transmitted through the arm bearing. Equipped with an oil elevator with a free stopper mechanism. The arm pipe and shell are connected using the T.T. method (three-point crimping), eliminating connection play. Short type arm. By using the separately sold middle mass weight and light mass weight, almost all commercially available cartridges can be used. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

SAEC WE-308SX tonearm for professional. It is upgrade of WE-308N tonearm. It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Tonearm cable is included. Specification: A tonearm with a double knife edge structure. A double knife edge structure is adopted for the bearing. The double knife edge has a structure in which the blades of the conventional knife edge are two, but by making it four blades on the top and bottom, it is firmly suppressed from both sides and the top of the edge receiver. Since the four blades of this knife edge are ground so that they are aligned in a straight line, they form a strong rotating shaft with no mechanical play around this line as the rotating shaft. SAEC knife edge blades are ultra-precision with a diameter of 2/100 mm or less. This finish is unique to SAEC. First, it is shaved to 5/100 mm, which is the limit that can be machined, and then it is finished by skilled human hands to 2/100 mm. The WE-308SX uses hard ruby for the bearing contacts to improve sensitivity and prevent aging. Concealment is achieved by strengthening the knife edge part and around the axis of the edge receiver. Crosstalk is improved by 20dB in fo by mounting a mechanical equalizer. It is equipped with a lateral balancer and an automatic stylus pressure slight increase mechanism. Form double knife edge static balance, universal type Total length 329mm Effective length 240mm Overhang 5mm Tracking error 0° at inner circumference Cartridge usage range 23.5g ~ 33.5g (both shells, when using standard weight) 18.3g to 40.0g (both shell and when using auxiliary weight W-2) Stylus pressure adjustment range 0 to 4g (2 rotations, direct reading type) Mounting hole diameter 30?mm Arm mounting method Nut tightening (arm stabilizer AS-500E sold separately) Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Original heavy SAEC S-1/II Tonearm Bracket for 2nd tonearm plinth mounting With this bracket you can install a 2nd tonearm on your TT, Bracket in near mint condition and work perfectly. comes with Japanese manual Express Shipping : 3 - 10 days.Standard Shipping : 7 -14 days.Economy Shipping : 10 - 28 days. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility.

SAEC ULS-3X ceramic headshell for tonearm. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Description Manufacturer: SAEC Model: WE-407/TM Total length: 322mm Effective length: 236mm Overhang: 15mm Mounting hole diameter 30mm (arm shaft diameter 27cm) Accessories Main weight Lateral weight Inside force canceller weight PHONO cable (SAEC) Mounting nut/washer Instruction manual (copy) Includings are all shown in the photos. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting. Shipping I send a product by FEDEX or EMS. I attach the tracking number. Please bid it without worrying ? Can not be bundled. Returns Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 14 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 14 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden. International Buyers Please Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Description Outputs from both channels Lowering speed of the lifter (oil replenished) Adjustment points and operational feel Height adjustment, etc. There are no issues with operation. ?Product Contents Manufacturer: SME Model: 3009-R ?Accessories Main weight/Tracking force weight Inside force canceller/Pulley RCA cable (SME) Base fixing screws x 4 Instruction manual (Japanese copy) Mounting plate (copy) Alignment protractor (copy) If you have any question or concern, please do not hesitate to contact me : ) ShippingStandard Shipping (FedEx, Japan Post)We usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days after shipment.Pack carefully : ) International Buyers - Please Note?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

SAEC WE-308L Long Tonearm w/ Main Lateral Weight PHONO Cable Maintained Japan Description Condition: used SAEC WE-308L Long Tonearm Popular long arm WE-308L. The sound stability is outstanding and the tracing ability is high. The double knife edge structure and sharp appearance are also attractions of this model. ?ConditionEach part has been polished and cleaned.The arm is shiny and beautiful with no noticeable scratches.The accessories such as weights and cables are also in good condition.Overall, it is in a beautiful condition.Considering the age, we judge it to be a beautiful product. ?OperationWe have confirmed the operation with our equipment.?There are no problems with the output from both channels, the lowering speed of the lifter (oil refilled), each adjustment point, the feel of the operation, the height adjustment, etc. ?Product ContentsManufacturer: SAECModel: WE-308L ?Accessories?Main weight?Lateral weight?Inside force canceller weight?PHONO cable (SAEC)?Mounting nut/washer?Instruction manual (original)?Mounting card (copy) All my products are 100% Authentic.Please feel free to contact us if you have any question.Please check the picture. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

DescriptionCondition: USED Operation We have checked the operation with our equipment. Output from both channels Lifter descent speed (oil replenished) Adjustment points, operation feeling Height adjustment, etc. There is no problem in operation. Payment Payment Please pay within 5 days after your purchase. Shipping ShippingAbout other area, please ask me.When you purchase two or more our items, in some cases, we can send them together. Economy Shipping ?Japan Post : With Tracking Number /About 2?4weeks +Handling Time(10 business days) Expedited Shipping Fedex : With Tracking Number /About 1weeks +Handling Time(10 business days) DHL : With Tracking Number /About 1weeks +Handling Time(10 business days) Japan Post : With Tracking Number /About 1~2weeks +Handling Time(10 business days) Returns Returns are accepted ONLY if the item was not the item described International Buyers - Please Note: Attention: If the item for sale is an electronic device, the voltage may be 100V. In this case, it is for use in Japan only. If you are using the product overseas with a voltage higher than 100V, such as 200V to 240V, you will need to use a transformer to adjust the voltage. If you do not use a transformer, this product will malfunction. If you use the device without a transformer, we cannot be held responsible for any damage to the device.Please purchase from a local retailer. We cannot deliver to a P.O. Box.If you have specified a P.O. Box, please provide us with an alternative address. If this is not possible, your order may be canceled at your request. Depending on the country, you may have trouble with additional charges and custom charges/taxes in remote areas.Please understand the following rules before purchasing. * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. Due to international transport regulations, in the case of products that contain lithium batteries or batteries, even new products may be opened. After that, we may consult with you about using a different type of transport or removing the lithium or batteries, etc. Please understand this and make your purchase. Thank you for your understanding.

SAEC WE-407/TM Tonearm w/Cable For Turntable Cartridge. Fantastic Sound. Same as the 407/23 just that this was made for micro Seiki by SAEC. THESE ARE SUPER ARM WITH SOME OF THE BEST BEARINGS. AND THEY ARE BUILT YO LAST. NICE SPECIMEN.

------------ Operation------------Operation has been checked.This is a WE-308 that I used at home.It was working fine until I removed it.The weight for the side force canceller is an external one.An external phono cable is included.The internal resistance of the tone arm was measured using a tester, and both left and right sides were in good condition with low resistance values.If there is any defect, we will accept returns free of charge. ------------ Accessory------------ Everything in the product images will be included.------------ Packaging------------ To prevent damage due to the impact of overseas transportation, we will ship the product in reinforced cardboard boxes. If the product comes with the original box, we will ship it with the original box protected. ------------------ Handling Time------------------ Ships within 5 business day.--------------------------*Operation Guarantee-------------------------- We carefully conduct operational checks one by one, but due to a reasonable inspection process tailored to the characteristics of each instrument, we limit our checks to basic functions. However, we thoroughly document any defects, issues, or critical flaws, including findings from interviews with the previous owner. Additionally, if any issues are discovered after your purchase, we offer a 30-day operational guarantee and free returns. Should any problems arise, please do not hesitate to contact us. ------------------------------------------------------*Precautions for International Transportation------------------------------------------------------ Duties, taxes, and fees incurred when importing merchandise are not included in the merchandise price. These are the responsibility of the customer, and in the unlikely event of non-payment, the customer may lose both the merchandise and the purchase price. If you have any concerns or questions regarding these fees, please contact your local tax office or other appropriate authorities in advance.

Condition DescriptionUsed with a homemade turntable. Operation confirmed with a cartridge on hand before listing. The arm lift became stuck, so we disassembled it, polished the shaft, and changed the oil. At this time, the bottom of the lift was scratched. Also, the hole is widened to open the lid. Please check the image. Policy Shipping Basically, items are shipped by DHL or Fedex. Depending on the delivery area, items may be shipped by UPS or Japan Post.International Buyers Import duties, taxes, and related charges are not included in the item price or shipping charges. Payment of these charges is the responsibility of the buyer. Please check with your countrys customs office to determine how much these additional charges will be before bidding or purchasing. Thank you for your understanding.

Description The exterior has some dullness and dirt. Serial number 27768 Double knife edge static balance type Total length 329mm Effective length 240mm Cartridge usage range: 23.5g to 33.5g Stylus pressure adjustment range: 0 to 4g Mounting hole diameter 30mm Conductivity confirmed as of 2024.11.30 Accessories: Connection cord Includings are all shown in the photos. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting. Shipping I send a product by FEDEX or EMS. I attach the tracking number. Please bid it without worrying ? Can not be bundled. Returns Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 14 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 14 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden. International Buyers Please Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SAEC WE-407/TM Tonearm w/Cable For Turntable Cartridge. Fantastic Sound. Same as the 407/23 just that this was made for micro Seiki by SAEC. THESE ARE SUPER ARM WITH SOME OF THE BEST BEARINGS. AND THEY ARE BUILT YO LAST. NICE SPECIMEN.

Description of itemSecond hand item. *Please feel free to contact us if you have any questions.Payment methodSame as ebay payment methodshipping methodYour order will be dispatched to you from Japan within the designated handling time from the date of payment.Transaction mattersPacking state: We will carefully pack your items with the most appropriate protection materials to avoid your items from getting damaged during transport to you. Feedback:You will receive a positive feedback from our store as soon as you successfully complete your order and payment. We would very much appreciate if you could leave us one, too! We are a Japanese store specializing in Japanese high-quality products. Please let us hear from you with any inquiries you may have about our products. Happy shopping!To overseas buyers-Notes:Please be aware of customs fees - such as taxes and duties - when your order arrives. Since these fees vary from location to location, CUSTOMS FEES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. Please check with your local customs office for more information on the fees in your area. Refusal to pay these fees can result in an undeliverable order. Please note - we cannot undervalue orders, or mark them as a gift.

SAEC WE-308 tonearm for professional with anti-skating weight, cable * VG++ It works perfectly, comes with original counter weight, antiskating weight, lateral weight. Item was tested and working perfectly. Specification: Form double knife edge static balance, universal type Total length 329mm Effective length 240mm Overhang 5mm Tracking error 0° at inner circumference Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

SAEC WE-407/23 Double Knife Edge Static Balance Type Tonearm Pickup Arm Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents. Output from both channels. Lifter descent speed (oil replenished). Each adjustment point, operation feeling. Height adjustment, etc. Polished and cleaned for each part. Other than a minor scratch on the arm height adjustment screw, there are no noticeable scratches, and overall the product is a beauty.Please refer to the photo. Specifications Overall length: 311mmEffective length: 233mmOverhang: 12mmMounting hole diameter: 30mm (arm shaft diameter: 27cm)Cartridge usable range: 15g-25g (shell included, W-7M used) *This tone arm is equipped with W-7M (orange dot) for middle mass weight. Accessories Main weight (orange dot, medium weight)Lateral weights (orange dots, medium weight)Inside force canceller weightPHONO cable (SAEC CX-5006A)Instruction Manual (copy) (Japanese)Mounting card (copy)Mounting nut/washer Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Description Manufacturer: SAEC Model: WE-407/23 Total length: 311mm Effective length: 233mm Overhang: 12mm Mounting hole diameter 30mm (arm shaft diameter 27cm) Accessories Main weight (orange button, medium-weight optional weight) Lateral weight (orange button, medium-weight optional weight) Inside force canceller weight PHONO cable (SAEC CX-5006A) Instruction manual (copy for WE-407/23) Mounting card (copy) Mounting nut/washer The included W-7M medium-weight optional weight is compatible with cartridges weighing 15-25g (including shell). Includings are all shown in the photos. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting. Shipping I send a product by FEDEX or EMS. I attach the tracking number. Please bid it without worrying ? Can not be bundled. Returns Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 14 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 14 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden. International Buyers Please Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SAEC WE-407/TM Tonearm w/Cable For Turntable Cartridge. Fantastic Sound. Same as the 407/23 just that this was made for micro Seiki by SAEC. THESE ARE SUPER ARM WITH SOME OF THE BEST BEARINGS. AND THEY ARE BUILT YO LAST. NICE SPECIMEN.

Condition DescriptionUsed with a homemade turntable. Operation confirmed with a cartridge on hand before listing. The arm lift became stuck, so we disassembled it, polished the shaft, and changed the oil. At this time, the bottom of the lift was scratched. Also, the hole is widened to open the lid. Please check the image. Policy Shipping Basically, items are shipped by DHL or Fedex. Depending on the delivery area, items may be shipped by UPS or Japan Post.International Buyers Import duties, taxes, and related charges are not included in the item price or shipping charges. Payment of these charges is the responsibility of the buyer. Please check with your countrys customs office to determine how much these additional charges will be before bidding or purchasing. Thank you for your understanding.

Unused SAEC WE-407/23 tonearm for professional Record Player Peripherals JAPAN Description ?Manufacturer/Model NumberAUDIO ENGINEERINGCORP. SAEC WE-407/23 ?AccessoriesOuter box, instruction manual ?Condition/Maintenance DetailsAppears to have been stored unused.The outer box has scratches and yellowing due to age,but the contents are in good condition. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.