Good working condition, bearings are smooth, white paint missing from counterweight markings, otherwise good to very good cosmetic condition. Includes an Ortofon headshell with open front. The headshell has a broken screw in the cartridge mount plate. The wires have been extended and RCA mounts added. Includes a carbon fiber panel mount plate. Also includes an unknown armrest which works nice with this arm. Last photo is for reference, the armboard and beer are glass not included. Thanks!

Presenting a nice example of a classic ORTOFON RS-212 tonearm with on-board Arm lift RARE Original Box. Sorry no cable and armrest is headshell. The original clear plastic guage and metal guage is included for mounting tonearm. Nice Shape Super arm. Ultra Rare box.

????Including & Condition Details: As shown in photos. ortofon RS-212 Tonearm Armrest/PHONO cable included Dynamic balance type tonearm was released in 1967. It is a short arm that gives you a proper and solid tone. ?ConditionEach part has been polished/cleaned. There are no major scratches and it is glossy/shiny. There is no noticeable damage to cables or other accessories. ?OperationThe operation has been confirmed using our equipment.?There are no problems with the operation, such as the output from both channels, the lifters descending speed, each adjustment point, operation feel, and height adjustment. ?Product ContentsManufacturer: ortofonModel number: RS-212 ?Accessories?Armrest?PHONO cable?Arm base?Base fixing screw × 3?books?instruction manual (copy/English version, special version, but as a bonus)?Template (copy) ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

The final form of Ortofons tone arm is the RS-212D.Difficult to obtain as production has ended.Ortofons tone arm is the best combination to reproduce the tones of Ortofons famous cartridge SPU.It has hardly been used and has been stored, so it is in very good condition.Comes with original box, instruction manual, and phono cable.Effective length: 9.0in / Effective length: 8.4in / Overhang: 0.6inHeight adjustment range: 1.7-2.2in / Offset angle: 22°Needle pressure adjustment range: 0g to 5g / Antei scale: 0g to 5g Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Item Description Condition : USED Very GoodIncludes original box, instruction manual, and phono cable. Effective length: 229mm / Effective length: 214mm / Overhang: 15mm Height adjustment range: 42 to 55mm / Offset angle: 22° Needle pressure adjustment range: 0g to 5g / Antiscaping: 0g to 5g Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Klassiker der 70er Jahre. Top in Klang und Verarbeitung. Inklusive Tonarmablage und Cinchkabel. Guter Zustand. Manual als Kopie dabei. Ideal für Denon DL-103, diverse SPUs etc. (Ohne Tonabnehmer) Bilder zeigen den Tonarm auf einem Sony TTS-3000 Laufwerk montiert, das ist natürlich nicht dabei...hier wird der Tonarm verkauft. User Bewertungen: ****/* Really fantastic arm! Used it with a ortofon M15 on a Thorens td124 mkl. And listened to classic music. Wow! Listened to modern music to, also great. Those guys back in the days knew how the make good stuff. Maybe if you put a SL-15 in the arm there is heaven. It sings with my aluminum body denon dl-103r. It killed my Linn LP-12 w/valhalla and Ittok.... Technik siehe Bilder und: The Ortofon RS-212 is a professional tonearm with detachable headshell suitable for cartridges from 7-19g in weight. The arm is also suitable for use with the Ortofon SPU/GT, SPE/GT or S15/MT. The RS-212T is identical but comes pre-fitted to an armboard for the Thorens TD-124, TD-121, TD-125 or TD-150 turntables. Specifications Total length: 300mm Mounting distance: 212mm Height adjustment: 35 to 60mm Arm base diameter: 50mm Effective length: 228mm Offset angle: 22.7 degrees Overhang: 16mm Stylus pressure: 0 to 4.5g Cartridge weight range: 7 to 19g Weight: 425g

NOS - ORTOFON RS212 tonearm NO. 53073With the shown armlift and armrest. The reason for no box and other accessories is that I got it from an former ORTOFON employee that got it from his work in that condition. Condition: The item should be NOS and functions as intended. But now sold as used as I have no proof that it is NOS. Only the parts there is in the pictures is included. There are no box and other accessories. Look carefully at pictures before you buy. If you have any questions or have a need of other pictures, then just ask. Shipping: Item is shipped from Denmark. Denmark is an EU country and tax could be added by EBay if you are from a non EU country. Postage cost: · Posted as ordinary mail without tracking number: Worldwide $19 (with ordinary mail I will not be hold responsible for any lose of item). If you prefer posted with tracking number then please let me know and the price will be: Worldwide $64. · The item will be very carefully packed when shipped. ….look at my feedback….

DescriptionIt has hardly been used and has been stored, so it is in very good condition. Comes with original box, instruction manual, and phono cable. Effective length: 229mm / Effective length: 214mm / Overhang: 15mm Height adjustment range: 42-55mm / Offset angle: 22° Needle pressure adjustment range: 0g to 5g / Antei Skating: 0g to 5gPayment payoneerShipping japan post -Fedex *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.Terms of Sale We can accept return within 60 days after you receive it. Please make sure to contact us first if you want to return it. It is buyers responsibility for the return shipping cost when sending back the item to us. The item has to be returned in the original condition from the time you received. No returns on products that show any evidences of use.International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

ortofon RS-212 Dynamic Balanced Tonearm Pickup Arm Vintage Audio 1967 Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, tarnish, dirt, etc. due to normal use. For other appearances, please refer to the photo. Specifications Dynamic balanced typeOverall length 300mmRunning length 228mmOverhang 16mmNeedle pressure range 0 to 4.5g (1g step)Arm height 35mm to 60mmArm base hole 22mm Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Item Description Condition : USED Very GoodEffective length: 214mm (218mm with SPU) ?Overhang: 15mm ?Needle pressure adjustment range: 0 to 5g ?Compatible weight: 18 to 40g (including shell) ?Self-weight: 660g ?Needle pressure gauge DS-1 included Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

The final form of Ortofons tone arm is the RS-212D.Difficult to obtain as production has ended.Ortofons tone arm is the best combination to reproduce the tones of Ortofons famous cartridge SPU.It has hardly been used and has been stored, so it is in very good condition.Comes with original box, instruction manual, and phono cable.Effective length: 9.0in / Effective length: 8.4in / Overhang: 0.6inHeight adjustment range: 1.7-2.2in / Offset angle: 22°Needle pressure adjustment range: 0g to 5g / Antei scale: 0g to 5g Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

ortofon RS-212D Tonearm Accessoriesshown in the photos*Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.

Effective length: 214mm (when using SPU: 218mm)Overhang: 15mmNeedle pressure adjustment range: 0 to 5gCompatible weight: 18-40g (including shell)Own weight: 660gAccessories: Mounting screws, phono cable, instruction manual It works properly and is ready to use.Please check the product condition and accessories in the pictures.Please note that this is an aged product and there are small scratches and other signs of use.The accessories are all shown in the picture.Please note that this item is also sold in stores in Japan, so it may be sold out. We accept PayPal, Visa, MasterCard, American Express and Discover. Items will be shipped via FedEx or EMS.Since it has a tracking number, please bid with confidence.Shipping is available from Monday to Friday.We do not ship on Saturdays, Sundays, or Japanese holidays as the courier is closed on those days.Shipping to PO BOX is not accepted. Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. Thank you for visiting our store!We have been selling online in Japan for over 15 years, so there is no need to worry about transactions. We will send high quality products all over the world.If you have a product you want to find in Japan, please feel free to contact us.We also have various other items for sale.Please take a look at the list of items for sale.Thank you.

English version below. Angeboten wir ein Umbausatz für den Ortofon AS 212. Dieses Angebot richtet sich an Besitzer des AS212 mit dem Wunsch, diesen auf eine effektive Länge von 12 Zoll umzubauen. Dazu sollten sämtliche Teile des vorhandenen AS212 mit Ausnahme des Tonarm-Rohrs mit Lagerhülse wiederverwendet werden. Dieses Angebote umfasst ausschließlich folgende Teile (gemäß Abbildung 2): Tonarmrohr aus einer Aluminium-Legierung mit der Geometrie gemäß Abbildung 4. Sich aus dieser Geometrie ergebende Abtastfehler und Verzerrungen sind in Abb. 5 dargestellt.Vertikal- Lagerhülse hergestellt aus dem technischen Kunststoff Polyoxymethylen, vormontiertVertikal-Lagerbolzen mit fein-geschliffenen und polierten Lagerschalen, vormontiert (eingepresst). Zum Vergleich in Bild 3 der originale Lagerbolzen (nicht Teil des Angebots).Erdungsstift aus Messing zum Anlöten der Masseleitung des Tonarms, vormontiert (eingepresst).Zwei magnetisch am originalen Gegengewicht haftende Zusatzgewichte zum Ausbalancieren zweier Bereiche von Headshell & Tonabnehmer Massen:Gewicht 1 ist zu verwenden bei Headshell & Tonabnehmer Masse 16-28 gGewicht 2 ist zu verwenden bei Headshell & Tonabnehmer Masse 25-39 g Die Lagerkugeln sowie -Schrauben sind nicht im Lieferumfang enthalten und sollten vom Spender-Tonarm übernommen werden. Bei Bedarf kann ich diese auch liefern. Das Titelbild zeigt beispielhaft einen aus dem hier angebotenen Umbausatz und den Teilen eines AS212 Spender-Tonarms zusammengesetzten 12-Zoll Tonarm. Die in diesem Bild gezeigten Komponenten (SPU-Tondose, Tonarmbasis, AS 212 Spender-Teile etc.) sind mit Ausnahme der oben aufgelisteten Teile nicht Bestandteil dieses Angebots. Unter Verwendung der benötigten Teile des Spender-Tonarms wie SME-Befestigung, Horizontal-Lager Gabel, etc. ergeben sich unter Einhaltung der vorgesehenen Geometrie folgende Technische Daten: Tonarmlänge effektiv (Leff): 322 mmMontage-Abstand (P/S): 309 mmÜberhang: 13 mmOffset-Winkel: 17 Grad Bei technischen Fragen bin ich gern bereit, mit Rat und Tat zu unterstützen. Als privater Anbieter schließe ich jegliche Gewährleistungsansprüche sowie eine Rücknahme des Artikels aus. For sale is a conversion kit for the Ortofon AS 212 Tonearm. This allows for a most economic way of achieving your 12 inch Ortofon tonearm, incorporating a maximum degree of recycling an existing, possibly broken (e.g. bearing housing) AS 212 tonearm.This listing contains only below listed components as of fig. 2. Tonearm wand made of aluminum-alloy with the geometry as of fig. 4 CAD drawing. Resulting performance in terms of tracking angle and distortion is detailed in fig. 5Vertical bearing housing precision machined of POM (pre-mounted).Vertical bearing stud with honed and polished bearing shells (pre-mounted, press-fit as of the original AS212). Figure 3 shows the new mounted bearing stud in comparison to an original AS212 condition (not included).Grounding bolt made of brass, pre-mounted, press fit. (For soldering the tonearm grounding wire).Two magnetically attachable extension counterweights, covering two ranges of headshell & cartridge weights:weight 1: headshell & cartridge weights of 16...28 gweight 2: headshell & cartridge weights of 25...39 gBearing balls and screws are not included and shall be re-used from the donor AS 212. The title photo shows an example assembly using the offered conversion kit. Any parts not contained in the above listed content (e.g. SPU cartridge, tonearm base, AS 212 donor parts etc.) are shown for demonstration purposes only and are not subject to this listing. The finished arm made of this conversion kit and the donor AS212 arm will have the below technical data: Tonearm effective length (Leff): 322 mmMounting distance from spindle center (P/S): 309 mmOverhang: 13 mmOffset angle: 17 degrees In case of any technical questions, please feel free to contact me. International bidders are welcome. Please ask for shipping quote in case your location is not listed.

Condition DescriptionThere is a small scratch on the weight fixing knob at the top. Other than that, no noticeable damage is found. This is a used item only. Please note that there may be scratches/scratches/feelings due to normal use. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by International Priority(FedEx or UPS) or EMS(Japan Post) . I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in eBay. Please note that any address not registered in eBay is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Ortofon RS-212D 9 Dynamic Balanced Tone Arm In Excellent USEDDescriptionGood condition PaymentPlease pay within 3days after your purchase.ShippingWe send a product with careful packing. After confirm your payment, Well ship this item within 3-7 business days.(except for Saturday, Sunday and national holiday in JAPAN )Weekends are not available because FedEx or DHL are closedInternational Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Ortofon RS-212D 9 Dynamic Balanced Tone Arm In Excellent ConditionItem Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This tone arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. The Item will arrive in approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

Item Description Condition : USED Very GoodOutput from both channelsFast descent speed of the lifter.Needle pressure adjustmentEach adjustment point, operation feelingHeight adjustment, etc.There is no problem other than the above lifter operation. AccessoriesAuxiliary weightArmrestPHONO cableArm baseBase fixing screws x 3Instruction manual (copy) (special edition, but as an extra)Template (copy) Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

ortofon RS212 Dynamic Balanced Type Tonearm Pickup Arm Vintage Audio for SPU Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. The descent speed of the arm lifter is fast. For other appearances, please refer to the photo. Specifications Type: Dynamic balanced typeOverall length: 300mmEffective length: 228mmOverhang: 16mmStylus pressure range: 0 to 4.5g (1g step)Arm height: 35 to 60mmArm base hole: 22mm Accessories Auxiliary weightsArmrestsPHONO cableArm baseBase fixing screws x 3Instruction Manual (copy for RS212 special, but for reference only)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

ortofon RS212 Dynamic Balanced Type Tonearm Pickup Arm Vintage Audio for SPU Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance has small scratches, dullness, dirt, etc. due to normal use. The descent speed of the arm lifter is fast. For other appearances, please refer to the photo. Specifications Type: Dynamic balanced typeOverall length: 300mmEffective length: 228mmOverhang: 16mmStylus pressure range: 0 to 4.5g (1g step)Arm height: 35 to 60mmArm base hole: 22mm Accessories Auxiliary weightsArmrestsPHONO cableArm baseBase fixing screws x 3Instruction Manual (copy for RS212 special, but for reference only)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Braccio pickup per braccio di tipo bilanciato dinamico ortofon RS212 Audio vintage per SPU Domo Arigato! Benvenuto, grazie per la tua visita. Descrizione Operazione confermata. Laspetto presenta piccoli graffi, opacità, sporco, ecc. a causa del normale utilizzo. La velocità di discesa del sollevatore del braccio è elevata. Per altre apparizioni fare riferimento alla foto. Specifiche Tipo: tipo bilanciato dinamicoLunghezza totale: 300 mmLunghezza effettiva: 228 mmSporgenza: 16 mmIntervallo di pressione dello stilo: da 0 a 4,5 g (incremento di 1 g)Altezza del braccio: da 35 a 60 mmForo base braccio: 22 mm Accessori Pesi ausiliariBraccioliCavo FONOBase del braccioloViti di fissaggio della base x 3Manuale di istruzioni (copia per RS212 speciale, ma solo come riferimento)Modello (copia) Spedizione La spedizione è disponibile solo per lindirizzo registrato su eBay. La spedizione è entro Fedex O SME. Spedizione gratuita ritorna Politica di restituzione incondizionata Il servizio e la soddisfazione del cliente sono molto importanti per noi.Ho una politica di restituzione incondizionata se notificata entro 30 giorni dalla ricezione dellarticolo. Tutti gli articoli restituiti devono essere nella condizione originale.Tutte le richieste di reso devono essere effettuate entro 30 giorni dal ricevimento dellarticolo. Per favore contattami prima per il reso prima di rispedirmelo.Le spese di spedizione della merce restituita sono a carico dellacquirente. Acquirenti internazionali Notare che:I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione.Queste spese sono a carico dellacquirente.Si prega di verificare con lufficio doganale del proprio paese per determinare quali saranno questi costi aggiuntivi prima dellofferta/acquisto.Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo: non confonderle con spese di spedizione aggiuntive.Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come regali: le normative governative statunitensi e internazionali vietano tale comportamento. Mi dispiace, ma non possiamo organizzarlo perché è illegale in Giappone.Grazie.

NOS - ORTOFON RS212 tonearm NO. 53070Condition: The item is NOS and functions as intended. Only the parts there is in the pioctures is included. There are e.g. no armlift og cables. Look carefully at pictures before you buy. If you have any questions or have a need of other pictures, then just ask. Shipping: Item is shipped from Denmark. Denmark is an EU country and tax could be added by EBay if you are from a non EU country. Postage cost: · Posted as ordinary mail without tracking number: Worldwide $19 (with ordinary mail I will not be hold responsible for any lose of item). If you prefer posted with tracking number then please let me know and the price will be: Worldwide $64. · The item will be very carefully packed when shipped. ….look at my feedback….

### The Audio Board: www.theAudioBoard.com - The Search Tool for Used High-End Audio Equipment### Best Price MOVING SALE: A pending move in the summer forces to liquate my stuff before that. I am selling a vintage, sought-after Ortofon RS-212 Stereo Tonearm with Ortofon Removable Headshell & Arm Rest Made in Denmark. It is dynamic loading which uses spring for imposing force on the needle (just like Ortofon RMG-212). There is a cue mechanism similar to Ortofons own Hi-jack. This cue lift works (maybe a bit sluggish). The tonearm is in pretty good condition. Bearing is tight and smooth. The sale includes the tonearm, headshell, and arm rest in pictures; the arm rest does not appear to be complete (the lower portion affixing to plinth). No other accessories. I ship worldwide.

Condition DescriptionWorking fine We have confirmed the operation of our equipment. ?Output from both channels ?Descent speed of the lifter The arm has no noticeable scratches and is glossy and beautiful. Accessories such as shells/auxiliary weights/cables are also in good condition. Considering the age, we will judge it as a beautiful product. accessories ?Headshell (ortofon M type) ·Lead ?Auxiliary weight ?Armrest ?PHONO cable ?Arm base ?Base fixing screw x 6 ?Hex wrench x 3 ?Instruction manual (original/English) ·template ?Original box ?Stylus pressure adjustment ? Each adjustment point, operation feeling ?Height adjustment, etc. There is no problem in operation. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.