ROTEL RX-800A STEREO RECEIVER IN EXCELLENT CONDITION WAS VERY EXPENSIVE IN THE 70s TOP OF RANGE AND NOTHING SPARED QUALITY WISE WHEN ROTEL MADE THE 800A.THIS ONE HAS BEEN VERY WELL CARED FOR OVER THE YEARS AND LOOKS AND SOUNDS EXCELLENT,VERY HIGH WATTS PER CHANNEL FOR BEGINNING OF THE 70s.EVERYTHING WORKING AS IT SHOULD NO NOISES AND HAS A LOT OF FEATURES AND CONTROLS.ALL LIGHTS WORKING INCLUDING STEREO LIGHT AND HAS A DIMMER ON FRONT.VERY HEAVY BUT WILL BE PACKED VERY WELL.All Solid State Design with Silicon Output Transistors.Split Power Supply and Direct Coupling Circuitry.Superb FET Front End TunerRotary Controls; Dual Bass, Dual treble, Mode, Function Selector, Balance, Volume and Tuning.Push Buttons; Power, Dimmer, Speaker 1 and 2, Tone Defeat, Low Filter, High Filter, Loudness, Tape Monitor 1 and 2, Audio Muting and FM Muting.Extra wide and linear Dial Scale.Illumunated AM/FM Signal Strength Tuning Meter.Illumunated FM Center Tuning Meter.Illuminated Dial Pointer and stereo Beacon.Function Indicator Lights.Front Panel Headphone jack.Pre-Amp Outputs and Main-Amp Inputs.Connections for 2 Record Players and 3 Tape Recorders.Handsome Wood CabinetSpecificationsAmp SectionTotal Music Power (IHF): 180 W (4 ohms); 125 W (8 ohms)Continuous Power (RMS): 60 W (4 ohms); 40 W (8 ohms) both channel driven at less than 0,5% THDHarmonic Distortion: less than 0,3% (at 40 W, 20 - 20,000 Hz)IM Distortion: less than 0,2% at 40 W per ChannelFrequency Response: 4 - 75,000 HzPower Bandwidth (IHF): 5 - 50 HzSpeaker Impedance: 4, 8, 16 ohmsTuner SectionSensitivity (IHF)FM : 1,7µVAM : 20µVHarmonic Distortion: less than 0,5%S/N Ratio: 65 dBIF Rejection (FM) : 100 dBAM Image Rejection: 75 dBStereo Separation: 38 dBGeneralPower Voltage: AC 100, 117, 220, 240 V, 50/60 HzDimensions (W x H xD): 18 x 5½ x 13¾Weight: 12 kg (26,4 lbs)

ROTEL RX-800A STEREO RECEIVER IN EXCELLENT CONDITION WAS VERY EXPENSIVE IN THE 70s TOP OF RANGE AND NOTHING SPARED QUALITY WISE WHEN ROTEL MADE THE 800A.THIS ONE HAS BEEN VERY WELL CARED FOR OVER THE YEARS AND LOOKS AND SOUNDS EXCELLENT,VERY HIGH WATTS PER CHANNEL FOR BEGINNING OF THE 70s.EVERYTHING WORKING AS IT SHOULD NO NOISES AND HAS A LOT OF FEATURES AND CONTROLS.ALL LIGHTS WORKING INCLUDING STEREO LIGHT AND HAS A DIMMER ON FRONT.VERY HEAVY BUT WILL BE PACKED VERY WELL.All Solid State Design with Silicon Output Transistors.Split Power Supply and Direct Coupling Circuitry.Superb FET Front End TunerRotary Controls; Dual Bass, Dual treble, Mode, Function Selector, Balance, Volume and Tuning.Push Buttons; Power, Dimmer, Speaker 1 and 2, Tone Defeat, Low Filter, High Filter, Loudness, Tape Monitor 1 and 2, Audio Muting and FM Muting.Extra wide and linear Dial Scale.Illumunated AM/FM Signal Strength Tuning Meter.Illumunated FM Center Tuning Meter.Illuminated Dial Pointer and stereo Beacon.Function Indicator Lights.Front Panel Headphone jack.Pre-Amp Outputs and Main-Amp Inputs.Connections for 2 Record Players and 3 Tape Recorders.Handsome Wood CabinetSpecificationsAmp SectionTotal Music Power (IHF): 180 W (4 ohms); 125 W (8 ohms)Continuous Power (RMS): 60 W (4 ohms); 40 W (8 ohms) both channel driven at less than 0,5% THDHarmonic Distortion: less than 0,3% (at 40 W, 20 - 20,000 Hz)IM Distortion: less than 0,2% at 40 W per ChannelFrequency Response: 4 - 75,000 HzPower Bandwidth (IHF): 5 - 50 HzSpeaker Impedance: 4, 8, 16 ohmsTuner SectionSensitivity (IHF)FM : 1,7µVAM : 20µVHarmonic Distortion: less than 0,5%S/N Ratio: 65 dBIF Rejection (FM) : 100 dBAM Image Rejection: 75 dBStereo Separation: 38 dBGeneralPower Voltage: AC 100, 117, 220, 240 V, 50/60 HzDimensions (W x H xD): 18 x 5½ x 13¾Weight: 12 kg (26,4 lbs)