Unit powers on but I cannot seem to get to output noise, it may be something I am doing correctly, but since I cannot get it to work properly I am selling as parts Comes with unit only No remote or power cord

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz THD: 0.06% THD 120 watts (20-20,000Hz) cont. rated powerTHD: 0.03% one-half rated power one watt per channel Maximum Damping Factor (8 ohms): 180Input Sens. / Impedance: 1.0V / 27 kohms Frequency Response: 15-100kHz (0.5, -3dB) S/N Ratio (IHF A): 115dB Power Consumption: 800 watts Dimensions: (W x H x D) 433 x 189 x 380 mm, 17 1/8 x 7 1/2 x 15 Front Panel Height: 176 mm, 6.9Weight (net): 17 kg / 37.4 lbs

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz THD: 0.06% THD 120 watts (20-20,000Hz) cont. rated powerTHD: 0.03% one-half rated power one watt per channel Maximum Damping Factor (8 ohms): 180Input Sens. / Impedance: 1.0V / 27 kohms Frequency Response: 15-100kHz (0.5, -3dB) S/N Ratio (IHF A): 115dB Power Consumption: 800 watts Dimensions: (W x H x D) 433 x 189 x 380 mm, 17 1/8 x 7 1/2 x 15 Front Panel Height: 176 mm, 6.9Weight (net): 17 kg / 37.4 lbs

Hallo, ich biete hier einen Verstärker mit Tuner von Rotel an. Er ist aus den 70/80 Jahren und war bis zu Letzt im Wochenendhäuschen im Betrieb und liegt nun schon länger im Keller im Schrank. Die VU Anzeige geht leider nicht, der Verstärker schon aber das Radio konnte ich nicht testen.Deshalb biete ich es als defekt an. Auf Grund des Alters sind Gebrauchsspuren vorhanden. Dies ist eine Privatauktion, deshalb keine Garantie, Rücknahme oder Umtausch. Auf Grund des hohen Gewichts von 14 Kg ohne Verpackung und der Gesamtgröße fällen die Versandkosten dementsprechend hoch aus.

Rotel RA-971 Integrated Amplifier Amp Black UNTESTED Sold as SPARES/PARTS The unit is sold as SPARES. There is NO fitted power plug. SO UNTESTED please assume FAULTY. There is something loose inside of the casing. Sold as SPARES.

Sehr gepflegte ROTEL- Anlage, bestehend aus: - RT- 1070 (Tuner)- RCD- 1072 (CD- Player)- RA- 1070 (Verstärker)

Rotel RSX-1056 ~ 5.1-Ch Surround Sound Receiver ~ 75WPC ~ PARTS or REPAIR Upon attempting to power on the unit, it automatically shuts off after approximately one second. Due to this issue, we are designating the sale as AS-IS for parts or repair purposes only. Missing Main knob ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The photos represent exactly what you will receive. If it is not pictured, it is not included in the order. Please utilize the zoom feature on the photos to examine the cosmetics of the item for yourself. For orders with Free Shipping, we reserve the right to use the most cost-effective shipping method available. In-store pickup is only available by prior arrangement. Shipping: We ship all items within one business day of receiving your payment, excluding weekends and holidays. Additional shipping fees will apply for all Alaska, Hawaii, and U.S. Territories (Guam, Puerto Rico, Virgin Islands, etc.) shipments. Shipping a large item to a PO Box, APO, or AFO zip code will also incur additional shipping fees. Damages: If items are damaged during transit, a claim should be filed with the carrier. We can file the claim on your behalf if you wish, but please contact us immediately if this happens, as we cannot be held responsible for how packages are handled during shipping. Please save the box and all packaging material for carrier inspection. Feedback: We include these additional lines for our mutual protection, but if you check our feedback, you can trust that we go out of our way to ensure the satisfaction of our buyers, as our business is only as good as our reputation. Please contact us immediately if there is a problem, as we cannot solve it if we are not made aware of it. Please do not leave bad feedback if there is an error but give us the chance to make it right. Disclaimer: All items that we list on eBay are in good working condition at the time of listing, unless otherwise noted. If we are unsure, we will indicate it in the listing. Please do not expect us to take back an item if it has not been fully tested. Although it worked when we tested it, there are no warranties offered or implied. Please ensure that you know what you are purchasing. We do not guarantee compatibility with your software, hardware, or electronic equipment, nor can we be held responsible for buyers remorse. We want you to get what you want, so please understand your risks and ask all questions before making a purchase. Not all equipment can be tested for 100% functionality. Some items are tested for basic power-up capability only. If something is not in the pictures or description, it is most likely not included, unless it is specifically listed as included.

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz THD: 0.06% THD 120 watts (20-20,000Hz) cont. rated powerTHD: 0.03% one-half rated power one watt per channel Maximum Damping Factor (8 ohms): 180Input Sens. / Impedance: 1.0V / 27 kohms Frequency Response: 15-100kHz (0.5, -3dB) S/N Ratio (IHF A): 115dB Power Consumption: 800 watts Dimensions: (W x H x D) 433 x 189 x 380 mm, 17 1/8 x 7 1/2 x 15 Front Panel Height: 176 mm, 6.9Weight (net): 17 kg / 37.4 lbs

Aus Sammlung biete ich hier an:Rotel AM/FM Stereo Tuner, Modell RT-970BXKlassischer vintage Tuner aus den 1980er Jahren.Funktioniert alles tadellos, inklusive Display okay.Optischer Zustand sehr gut und sauber, nur minimale Gebrauchsspuren.Als Käufer können Sie sich auf eine bestimmungsgemäße Verpackung verlassen. Portokosten in Deutschland 10,50 € - Privatverkauf etc.

Rotel RMB-1575 Five Channel Amplifier: This unit is not functional and is being sold “as is” for parts. The red light in front is illuminated indicating that the protection circuits have been engaged. There is no sound. Externally, the unit is like new with no scratches or defects (see pictures). The unit comes with the original manual and the original double box. It is being auctioned with no reserve. No returns. Shipping to continental US only. Original specifications when it was working: 250 watts to 5 channels at 8 ohmsTDH <0.03% (20hz-20khz)Frequency Response 10hz-80khz +/-1bB

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz THD: 0.06% THD 120 watts (20-20,000Hz) cont. rated powerTHD: 0.03% one-half rated power one watt per channel Maximum Damping Factor (8 ohms): 180Input Sens. / Impedance: 1.0V / 27 kohms Frequency Response: 15-100kHz (0.5, -3dB) S/N Ratio (IHF A): 115dB Power Consumption: 800 watts Dimensions: (W x H x D) 433 x 189 x 380 mm, 17 1/8 x 7 1/2 x 15 Front Panel Height: 176 mm, 6.9Weight (net): 17 kg / 37.4 lbs

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz THD: 0.06% THD 120 watts (20-20,000Hz) cont. rated powerTHD: 0.03% one-half rated power one watt per channel Maximum Damping Factor (8 ohms): 180Input Sens. / Impedance: 1.0V / 27 kohms Frequency Response: 15-100kHz (0.5, -3dB) S/N Ratio (IHF A): 115dB Power Consumption: 800 watts Dimensions: (W x H x D) 433 x 189 x 380 mm, 17 1/8 x 7 1/2 x 15 Front Panel Height: 176 mm, 6.9Weight (net): 17 kg / 37.4 lbs

Excellent condition. Like new. Buyer pays for shipping.

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz THD: 0.06% THD 120 watts (20-20,000Hz) cont. rated powerTHD: 0.03% one-half rated power one watt per channel Maximum Damping Factor (8 ohms): 180Input Sens. / Impedance: 1.0V / 27 kohms Frequency Response: 15-100kHz (0.5, -3dB) S/N Ratio (IHF A): 115dB Power Consumption: 800 watts Dimensions: (W x H x D) 433 x 189 x 380 mm, 17 1/8 x 7 1/2 x 15 Front Panel Height: 176 mm, 6.9Weight (net): 17 kg / 37.4 lbs

Biete Rotel RB-1590 Stereo Endstufe in Silber,,sehr neuwertig ca 7 Monate alt.Sehr selten benutzt da ich noch eine 2 Endstufehabe.Verkauf wegen Neuanschaffung. Die Rotel ist Registriert auf 5 Jahre Garantie. Verkaufe die Rotel als Privat Person ohne Haftung u Garantie von mir,, keine Rücknahme nach Gebot von ihnen.!! Versand ist nicht möglich wegen Gewicht von ca 48 KG mit Doppelkartons.Der Neupreis liegt im Netz bei ca 3.749 euro.Bitte beachten,,, ( Nur Abholung möglich,, kein Versand wegen Gewicht,,!!! )( Nach Kauf bitte die Ware schnellst möglich abholen,,!! ) Daten der Rotel bitte im Netz nachlesen.!!( Traumgebote werden nicht beantwortet !!! )Viel Spass beim bieten,,,, ( Siehe auch meine Anzeige der Rotel RC-1590 MKII Vorstufe mit Dac Wandler in Schwarz ca 5 Monate alt,,1+++ )

Vintage HIFI STEREO TUNERROTEL RT-726Kein Schnickschnack, sondern zwei analoge Zeiger für Tuning / die Mitte des Senders, und Signal / die Stärke des Empfangs. Dazu ein großes Drehrad zum einstellen und gut. Funktioniert tadellos. Optischer Zustand wie auf den Bildern zu sehen. Auf Radiomuseum-org steht zu dem Gerät: A stereo hi-fi tuner covering MW and FM with NFB Phase Lock Loop Multiplex. With FM Tuning and Signal Strength Tuning meters, rotary line Output Level control, rotary Function switch (AM, FM, FM Auto), push button switches for Hi-Blend and Muting, an adjustable AM ferrite bar aerial on the back, terminals for AM and FM antennae, RCA phono sockets for Fixed and Variable Line Output and for FM Output for a four channel detector (whenever available). Und noch das Übliche: Privatverkauf, keine Rücknahme. Natürlich stehe ich für die Richtigkeit der Beschreibung ein.Abholung bevorzugt!Versand in Deutschland mit DHL 7,69 Euro Am 07.01.25 hat der Verkäufer die folgenden Angaben hinzugefügt: Hab noch den alten Kaufbeleg gefunden. ;)

Rotel RSP-1098 DSP Board Part 016E-1367D00 – Untested – Appears NewDescription:This is a Digital Signal Processing (DSP) board for the Rotel RSP-1098 AV Processor. The board appears to be in excellent, like-new condition, with no visible signs of wear, soldering, or damage. It has not been tested, and is being sold as-is.Key Features:Model: DSP PCB ASSY RSP-1098Part Number: 016E-1367D00Functionality:Handles advanced audio signal processing for formats like Dolby Digital, DTS, and other surround sound configurations.Processes digital inputs, manages multi-channel audio, and ensures high-quality signal decoding for the Rotel RSP-1098.Plays a critical role in optimizing sound for immersive home theater setups.Condition:Physical Condition: Appears new, no visible signs of soldering or prior installation.Testing Status: Untested; functionality cannot be verified. Sold as-is.Compatibility:Designed specifically for the Rotel RSP-1098 AV Processor.It is unclear if this part is compatible with other Rotel models or devices. Buyers should verify compatibility before purchasing.Important Notes:Please review all photos for details on condition before buying.This is a critical component for repairing or restoring a Rotel RSP-1098 unit.Shipping Information:Ships securely in anti-static packaging.Buyer responsible for verifying compatibility and functionality upon receipt.

Rotel RSX-1067 Power Amplifier PCB Part 016X-1358A01 – UsedDescription:For sale is a Power Amplifier PCB (Part No: 016X-1358A01) used in the Rotel RSX-1067 Surround Sound Receiver. This board is an essential component for powering and managing the amplifier section of the receiver. It has been previously installed but shows no obvious signs of damage or repair. It is sold as-is and untested.Key Features:Model: Power Amplifier PCBPart Number: 016X-1358A01Compatibility: Specifically designed for the Rotel RSX-1067 Surround Sound Receiver.Functionality:Drives the power amplification stage of the RSX-1067.Handles multi-channel audio amplification for high-quality surround sound performance.Condition:Physical Condition: Used, with no visible signs of soldering repairs or major wear.Testing Status: This unit has not been tested; it is being sold as-is.Important Notes:Please review all photos for details regarding the condition of the board.Buyers should verify compatibility with their specific receiver model before purchase.Shipping Information:Ships securely in protective anti-static packaging.Buyer assumes responsibility for testing and installation.

Rotel RSX-1057 Digital PCB Board - Part 016E-1449A00 - For Parts or RepairDescription:This listing is for a Rotel RSX-1057 Digital PCB Board (Part Number: 016E-1449A00). This component is being sold as-is for parts or repair. It may need servicing, as indicated on the packaging (Change Flash IC). While the board shows no significant damage, please review the provided photos carefully for exact condition and details.Key Features:Model Compatibility: Designed for the Rotel RSX-1057 Receiver (ensure compatibility with your unit before purchasing).Condition:Sold as-is.May require component replacement or soldering (marked on packaging).Shows no visible signs of wear, soldering, or major damage.Part Number: 016E-1449A00 (verify this matches your system’s requirements).Important Information:Usage: Ideal for technicians or enthusiasts looking to repair or refurbish their RSX-1057 unit.Inspection: Please carefully examine the photos for all details before purchasing. No returns will be accepted.Note: This board has not been tested for full functionality.Shipping Information:Professionally packed to ensure safe transit.Buyer covers shipping costs.Disclaimer: This is a used part being sold for parts or repair. It is not guaranteed to be functional without repair or replacement of components.Add this essential component to your setup or repair project today!

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multii-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which israted for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generousheadroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well asthe most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suitedfor either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” inputand output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD120 wattsTHD (20-20,000Hz) cont. rated power one-half rated power one watt per channel0.03% MaximumDamping Factor (8 ohms) 180Input Sens. / Impedance 1.0V / 27 kohms Frequency Response 15-100kHz (=0.5, -3dB) S/N Ratio (IHF A) 115dB Power Consumption 800 watts Dimensions (W x H x D) 433 x 189 x 380 mm17 1/8 x 7 1/2 x 15 Front Panel Height 176 mm, 6.9Weight (net) 17 kg / 37.4 lbs

Biete Rotel RB-1590 Stereo Endstufe in Silber,,sehr neuwertig ca 7 Monate alt.Sehr selten benutzt da ich noch eine 2 Endstufehabe.Verkauf wegen Neuanschaffung. Die Rotel ist Registriert auf 5 Jahre Garantie. Verkaufe die Rotel als Privat Person ohne Haftung u Garantie von mir,, keine Rücknahme nach Gebot von ihnen.!! Versand ist nicht möglich wegen Gewicht von ca 48 KG mit Doppelkartons.Der Neupreis liegt im Netz bei ca 3.749 euro.Bitte beachten,,, ( Nur Abholung möglich,, kein Versand wegen Gewicht,,!!! )( Nach Kauf bitte die Ware schnellst möglich abholen,,!! ) Daten der Rotel bitte im Netz nachlesen.!!( Traumgebote werden nicht beantwortet !!! )Viel Spass beim bieten,,,, ( Siehe auch meine Anzeige der Rotel RC-1590 MKII Vorstufe mit Dac Wandler in Schwarz ca 5 Monate alt,,1+++ )

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multii-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which israted for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generousheadroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well asthe most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suitedfor either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” inputand output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD120 wattsTHD (20-20,000Hz) cont. rated power one-half rated power one watt per channel0.03% MaximumDamping Factor (8 ohms) 180Input Sens. / Impedance 1.0V / 27 kohms Frequency Response 15-100kHz (=0.5, -3dB) S/N Ratio (IHF A) 115dB Power Consumption 800 watts Dimensions (W x H x D) 433 x 189 x 380 mm17 1/8 x 7 1/2 x 15 Front Panel Height 176 mm, 6.9Weight (net) 17 kg / 37.4 lbs

Fully operational, used minor scratches, original box, power cord and owners manual. Recently used, non-smoking environment. Shipping to continental United States only. Seller does accept returns. Multii-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which israted for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generousheadroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well asthe most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suitedfor either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” inputand output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD120 wattsTHD (20-20,000Hz) cont. rated power one-half rated power one watt per channel0.03% MaximumDamping Factor (8 ohms) 180Input Sens. / Impedance 1.0V / 27 kohms Frequency Response 15-100kHz (=0.5, -3dB) S/N Ratio (IHF A) 115dB Power Consumption 800 watts Dimensions (W x H x D) 433 x 189 x 380 mm17 1/8 x 7 1/2 x 15 Front Panel Height 176 mm, 6.9Weight (net) 17 kg / 37.4 lbs

Erleben Sie erstklassigen Klang mit dem Rotel RT725 Radio-Tuner, einem Meisterstück der Audiotechnik. Dieses Modell besticht durch seine klare, ausgezeichnete Empfangsqualität und ist ein Muss für HiFi-Enthusiasten. Mit seinem eleganten Design fügt es sich nahtlos in jede Heim-Audio-Anlage ein und bietet ein außergewöhnliches Hörerlebnis. Der RT725 vereint Tradition mit moderner Technik und ermöglicht es Ihnen, Ihre Lieblingsradiosender in gestochen scharfer Qualität zu genießen.