Rotel RMB-1066 Six Channel Amplifier All Black Version Used - Tested & Working in Great Condition! This is backed by our 30 day money back guarantee! Sale includes only items pictured Please read all policies below prior to sending an offer or making the purchase.Auction Policies Used Item Disclaimer- Because this item is used it will show minimum to moderate cosmetic wear. Please view each of the pictures to get a better idea of condition specifics. Please ask any questions regarding the condition of the item prior to making an offer or purchase. Customer Service:5 Star service is our number one priority. Our office hours are Monday-Friday 9:00AM to 5:00PM. Feel free to contact us anytime and we will do our best to address any questions or concerns. Shipping: There will be a shipping surcharge for items shipped to Alaska, Hawaii, and Puerto Rico. Please contact us for total cost before purchase. Thank you.Your purchase will be processed, professionally packaged, and quickly shipped by our shipping department. Your item(s) will be shipped via USPS, FedEx, or UPS. NOT ALL ITEMS ARE ELIGIBLE TO BE SHIPPED TO A P.O. BOX.A HOME OR BUSINESS ADDRESS MAY BE REQUIRED.PLEASE CONTACT US PRIOR TO PURCHASEIF A P.O. BOX IS YOUR ONLY OPTION Customer Pick Up: If you are in or around the Seattle area and would like to pick your purchase up in person, you can come by and pick it up during business hours. Just send us a message with the listing number and we will give you our address. Returns due to Compatibility or Buyers Remorse: Customers are responsible for checking compatibility of all parts. Returns due to incompatibility or buyers remorse will be charged a 20% restocking fee. Refunds will be processed upon return of item in good working order and verification of serial numbers. Warranty Info: Warranties, if available, are listed in each item description. If you do not agree to these terms, do not make the purchase or send an offer.

Rotel RMB-1066 Six Channel Amplifier *Read Description - TESTED - WORKS - Does not include the remote, manual or any original packaging. Unit shows some wear and scratches, but overall is in good cosmetic condition. The face is clean with a couple scuff marks, all buttons are clean and work as intended and all of the illumination works. The bad, one positive terminal is broken off, but still works. The Left Positive terminal(see photos) Model #: RMB-1066Serial #: 963-6491118 Electronics Disclaimer: All electronics are marked with tamper proof security seals and serial numbers are recorded to prevent fraud. We strive to take excellent pictures and describe items as thoroughly and accurately as possible, but please dont hesitate to ask any questions that you may have. Thanks for looking! SKU#: GC-5018

Rotel RMB-1066 Six Channel Amplifier *Read Description - TESTED - WORKS - Does not include the remote, manual or any original packaging. Unit shows some wear and scratches, but overall is in good cosmetic condition. The face is clean with a couple scuff marks, all buttons are clean and work as intended and all of the illumination works. The bad, one positive terminal is broken off, but still works. The Left Positive terminal(see photos) Model #: RMB-1066Serial #: 963-6491118 Electronics Disclaimer: All electronics are marked with tamper proof security seals and serial numbers are recorded to prevent fraud. We strive to take excellent pictures and describe items as thoroughly and accurately as possible, but please dont hesitate to ask any questions that you may have. Thanks for looking! SKU#: GC-5018

Rotel RMB-1066 Six Channel Amplifier All Black Version For sale, we have a fine example of the Rotel RMB-1066 Six Channel Amplifier. Rated at 60 Watts per channel at 8 Ohms, the amplifier is in perfect working order. Physically, the unit is in excellent condition, with only minor blemishes. There are no dents or scratches, as the amp was well cared for. This amp is very versatile, and can be configure in 6, 5, 4, or 3 channel operation. Its capable of pushing 60 watts x 6 channels into 8 ohms (at 20-20 kHz, < 0.03% THD) with ease, or 150 watts x 3 channels into 8 ohms (at 20-20 kHz, < 0.1% THD) in bridged mono mode. On our bench, we opened the amp where it passed our visual inspection. Capacitors looked good with no bulging or signs of leakage. Resistors showed no signs of cracking or overheating, and the transistors showed no signs of damage. All switches on the back panel were cleaned and then treated with Deoxit. We then tested the amp using our Sencore PA81 amplifier analyzer. We ran a 1k sine wave into the amp, and on our scope each channel showed a clean wave. The amp easily tested clean at 60 watts per channel, and did not start clipping until 70 watts. With the amp testing as it should, we then ran the unit in our house system for about a week testing all six channels. Its a great sounding, amp,. We have had quite a few Rotel amps come through our shop, and we love this era of production. The amp will ship with a power cord, and a printed copy of the owners manual in english. See pictures for further details on the physical condition of the RMB-1066 We dont have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams. From Rotel: The RMB-1066 multi-channel power amplifier is an enormously flexible unit intended primarily for use in surround systems and home audio distribution. The power supply and output circuits are configured for exceptional reserve capability and stability. Insix channel mode, the RMB-1066 delivers 60 watts RMS each (20 Hz to 20 kHz @ 0.03% THD into 8 ohms). In five channel mode (one channel quiescent), power increases to 70 watts RMS, each measured by the same demanding standards. Amplifier pairs can be bridged to develop 150 watts x 3 for almost half a kilowatt of output power. Three rear panel switches (one two-way and two three-way) make bridging easy and also link the inputs via internal “daisy chain” connections with a single source, thus simplifying system wiring. Buffered line level outputs allow multiple amplifiers to “daisy chain” from a single source. Input level controls, strategically placed between front panel heat sink fins and an extensive 6 LED indicator array ease system adjustment and monitoring. 12 volt trigger operation and a detachable IEC power cord directly address demanding custom installation requirements while custom brass speaker terminals provide full contact power transfer. Specifications: Continuous Power Output Stereo Mode(20-20 kHz, < 0.03% THD)60 watts/ch into 8 ohmsContinuous Power Output Bridged Mono Mode(20-20 kHz, < 0.1% THD)150 watts/ch into 8 ohmsTotal Harmonic Distortion(20Hz-20kHz, 8 ohms)< 0.03%Intermodulation Distortion(60 Hz : 7 kHz, 4:1)< 0.03%Frequency Response (±1 dB)15Hz–100kHzDamping Factor (20-20,000 Hz, 8 ohms)150Speaker Impedance (combined load)Stereo mode: 4 ohms minimumBridged Mono mode: 8 ohms minimumSignal to Noise Ratio(IHF A network)116 dBInput Impedance22 k ohmsInput Sensitivity1.5 voltAuto Turn On Threshold Level(if activated)10 mV input signalAuto Turn Off Delay Time(if activated)5 minutes with no signalPower Requirements USA115 Volts, 60 HzPower Consumption700 WattsDimensions (W x H x D)16-15/16 x 4-3/4 x 17-1/8 in (430 x 121 x 435 mm)Weight (net)29.75 lb., 13.5 kg, Rotel RMB-1066 Six Channel Amplifier All Black Version For sale, we have a fine example of the Rotel RMB-1066 Six Channel Amplifier. Rated at 60 Watts per channel at 8 Ohms, the amplifier is in perfect working order. Physically, the unit is in excellent condition, with only minor blemishes. There are no dents or scratches, as the amp was well cared for. This amp is very versatile, and can be configure in 6, 5, 4, or 3 channel operation.  Its capable of pushing 60 watts x 6 channels into 8 ohms (at 20-20 kHz, < 0.03% THD) with ease, or 150 watts x 3 channels into 8 ohms (at 20-20 kHz, < 0.1% THD) in bridged mono mode. On our bench, we opened the amp where it passed our visual inspection. Capacitors looked good with no bulging or signs of leakage. Resistors showed no signs of cracking or overheating, and the transistors showed no signs of damage. All switches on the back panel were cleaned and then treated with Deoxit. We then tested the amp using our Sencore PA81 amplifier analyzer. We ran a 1k sine wave into the amp, and on our scope each channel showed a clean wave. The amp easily tested clean at 60 watts per channel, and did not start clipping until 70 watts. With the amp testing as it should, we then ran the unit in our house system for about a week testing all six channels. Its a great sounding, amp,. We have had quite a few Rotel amps come through our shop, and we love this era of production.  The amp will ship with a power cord, and a printed copy of the owners manual in english. See pictures for further details on the physical condition of the RMB-1066 We dont have the original box for this unit, but we take packaging and shipping seriously. We spare no expense and use heavy duty boxes, several inches of polyethylene foam on all sides of the unit, and use water activated, fiber reinforced tape on all seams.   From Rotel: The RMB-1066 multi-channel power amplifier is an enormously flexible unit intended primarily for use in surround systems and home audio distribution. The power supply and output circuits are configured for exceptional reserve capability and stability. In six channel mode, the RMB-1066 delivers 60 watts RMS each (20 Hz to 20 kHz @ 0.03% THD into 8 ohms). In five channel mode (one channel quiescent), power increases to 70 watts RMS, each measured by the same demanding standards. Amplifier pairs can be bridged to develop 150 watts x 3 for almost half a kilowatt of output power. Three rear panel switches (one two-way and two three-way) make bridging easy and also link the inputs via internal “daisy chain” connections with a single source, thus simplifying system wiring. Buffered line level outputs allow multiple amplifiers to “daisy chain” from a single source. Input level controls, strategically placed between front panel heat sink fins and an extensive 6 LED indicator array ease system adjustment and monitoring. 12 volt trigger operation and a detachable IEC power cord directly address demanding custom installation requirements while custom brass speaker terminals provide full contact power transfer. Specifications: Continuous Power Output Stereo Mode(20-20 kHz, < 0.03% THD)60 watts/ch into 8 ohmsContinuous Power Output Bridged Mono Mode(20-20 kHz, < 0.1% THD)150 watts/ch into 8 ohmsTotal Harmonic Distortion(20Hz-20kHz, 8 ohms)< 0.03%Intermodulation Distortion(60 Hz : 7 kHz, 4:1)< 0.03%Frequency Response (±1 dB)15Hz–100kHzDamping Factor (20-20,000 Hz, 8 ohms)150Speaker Impedance (combined load)Stereo mode: 4 ohms minimumBridged Mono mode: 8 ohms minimumSignal to Noise Ratio(IHF A network)116 dBInput Impedance22 k ohmsInput Sensitivity1.5 voltAuto Turn On Threshold Level(if activated)10 mV input signalAuto Turn Off Delay Time(if activated)5 minutes with no signalPower Requirements USA115 Volts, 60 HzPower Consumption700 WattsDimensions (W x H x D)16-15/16 x 4-3/4 x 17-1/8 in (430 x 121 x 435 mm)Weight (net)29.75 lb., 13.5 kg,     × × × × × × × × × × × × × × × × × × Tell a friend Visit store Watch now You might also like RHA MA390 UNIVERSAL MIC WIRED EARPHONES FOCAL SPARK WIRELESS SILVER RHA TRUE CONNECT BLACK WIRELESS EAR BUDS JABRA SPORT ROX WIRELESS HEADPHONES eBay integration by

Clean unit ready to go or reprogram with the original remote. Great for playing DVDs into surround sound speakers.

This Rotel 6 Channel Power Amplifier, model RMB-1066, delivers powerful sound with 6 channels each capable of producing 60W or can be bridged to produce 3 channels at 150W. The unit is in excellent condition and is fully functional. It's a great addition to any home audio setup and is perfect for those looking for high-quality sound. Get your hands on this Rotel Power Amplifier now! Excellent Condition

This Rotel power amplifier and surround processor set is a must-have for any audiophile. With 5 channels and 7 inputs, this high-end system delivers crisp and clear audio for all your entertainment needs. This set is from my own private collection. Rotel RMB-1075 has been certified by George Lucas laboratory according to the THX Ultra standard, which imposes serious requirements both in terms of circuitry and sound quality. As for the stuffing of the device, there are no reasons for criticism. Mono power amplifiers are located along the perimeter of the inner space. Massive radiators are provided for forced cooling, including those on the front panel. Rotel RMB-1075 power supply is a high-current toroidal transformer with 1500 VA power and eight capacitors with a total capacity of 80000 µF. The amplifier and processor are in excellent cosmetic and working condition. The weight of the amp is 39,7 pounds! Experience true surround sound with the Rotel RMB-1075 and RSP-1066. These professional-grade components are perfect for any home audio setup. It comes with original double boxes, power plug-in cables, high-end Monster one-way channel cables, trigger cable, manuals and remote control. The remote control looks lightly used, other equiment is in perfect condition. Enjoy this set

60 wpc into 8 ohms, in stereo mode. 150 wpc in bridged mode (3 channels, bridged mode will only allow 3 channels). Tested and functional. Played for several hours, connected to B&W Signature 805 speakers. Includes heavy duty power cord. 1165 Black front plate.

The RMB-1066 is a sophisticated six-channel power amplifier. Discrete output devices, a massive power supply with toroidal transformer, premium components, and Rotel’s Balanced Design ensure superb sound quality. High current capability allows the RMB-1066 to drive difficult speaker loads with ease. Operating Features: Three pair of amplifier channels, any of which can be bridged for mono operation (back panel switchable). Possible configurations: 6, 5, 4, or 3 channel operation.6 x 60 W or 3 x 150 W User selectable power on/off configuration: manual, automatic signal sensing, or controlled by remote 12 volt trigger signal.Front panel input level controls.Front panel LEDs indicate Bridged Mono mode for each pair of amplifier channels.Protection circuitry with front panel indicators.Signal link output to pass-through the input signal to another component. I used this unit for a multi-zone 2-channel stereo system; i.e., it powered stereo speakers in three separate rooms. Numerous additional configurations / implementations are possible as well. The unit is fully operational, having been used lightly and at low volume for a number of years until I decided to purchase a home theater receiver. Child, pet and smoke free. It is in fantastic condition without any scratches, dents, etc. Buyer to pay for shipping @ actual cost.

For sale by original owner. This listing is for both the RMB-1095 amplifier (5 x 200 watts) and the RSP-1068 surround sound processor. Comes complete with owner’s manuals, remote, and power cords. Used but fully functional. Condition as seen in pics, except for the scratch on the dial of the RSP-1068. Original boxes not available. Bid or make offer above current bid amount Local pick up only.

Im selling a USED, TESTED, WORKING ROTEL RMB-1075 Power Amplifier & ROTEL RSP-1066 Surround Sound Processor. Both of these units are tested for all functions and work great with no issues whatsoever. Cosmetically they do have a few signs of their age but nothing too serious, I would easily rate them 8-9/10 condition. This multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply s potential. The RMB-1075 s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt trigger input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. No remote included. Both units were serviced in December of 2023. Local buyers welcome to demo before purchase. I pack all of my shipments as securely as possible - please check my feedback and shop with confidence! Thanks for checking out my listing! SPECIFICATIONS Rotel RMB-1075 Power output: 120 watts per channel into 8 (5 channels) Frequency response: 15Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 180 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4 (minimum) Dimensions: 430 x 188 x 396mm Weight: 18kg Rotel RSP-1066 Frequency response: 10Hz to 95kHz Total harmonic distortion: 0.05% Input sensitivity: 200mV (line) Signal to noise ratio: 95dB (line) Output: 1.2V (Pre out) Digital inputs: coaxial, optical Video Connections: component, composite, SVHS Dimensions: 432 x 121 x 341mm Weight: 7.6kg

Fully working, mint physical condition

Fully working, mint physical condition

Fully working, mint physical condition

60 wpc into 8 ohms, in stereo mode. 150 wpc in bridged mode (3 channels, bridged mode will only allow 3 channels) Unit has a slight inward deting of the top front left corner. Tested and functional. Played for several hours, connected to Paradigm Signature S4 speakers. Includes power cord. 1077

Fully working, mint physical condition

Fully working, mint physical condition

Fully working, mint physical condition

60 wpc into 8 ohms, in stereo mode. 150 wpc in bridged mode (3 channels, bridged mode will only allow 3 channels) Unit has a slight inward deting of the top front left corner. Tested and functional. Played for several hours, connected to Paradigm Signature S4 speakers. Includes power cord. 1077