Description
RME ADI-2 DAC FS Balanced DAC / Headphone Amplifier (Very Good Condition). Original Packaging complete with very detailed manual explaining all the possible settings. Sounds superb in £5000+ system with Teddy Pardo pre and mono block power amps and Focal Aria 948 speakers. Also superb with Focal Clear headphones. Selling due to upgrade. SPECSADI-2 DAC FSDIGITAL INPUTSGeneralLock Range: 28 kHz – 200 kHzJitter suppression: > 50 dB (2.4 kHz)Jitter when synced to input signal: < 1 nsAccepts Consumer and Professional formatSPDIF coaxial1 x RCA, according to IEC 60958High-sensitivity input stage (< 0.3 Vpp)AES/EBU compatible (AES3-1992)SPDIF optical1 x optical, according to IEC 60958ADAT compatibleANALOG OUTPUTSXLROutput level switchable +19 dBu, +13 dBu, +7 dBu, +1 dBu @ 0 dBFSSignal-to-noise ratio (SNR) @ +7/+13/+19 dBu: 120 dB RMS unweighted, 123 dBASignal-to-noise ratio (SNR) @ +1 dBu: 117 dB RMS unweighted, 120 dBAFrequency response @ 44.1 kHz, -0.1 dB: 0 Hz – 20.2 kHzFrequency response @ 96 kHz, -0.5 dB: 0 Hz – 44.9 kHzFrequency response @ 192 kHz, -1 dB: 0 Hz – 88 kHzFrequency response @ 384 kHz, -1 dB: 0 Hz – 115 kHzFrequency response @ 768 kHz, -3 dB: 0 Hz – 109 kHzTHD @ 0 dBFS: < -120 dB, 0.0001 %THD+N @ 0 dBFS: -116 dB, 0.00016 %Channel separation: > 120 dBOutput impedance: 200 OhmRCAAs output XLR, but:Output: 6.3 mm TS jack, unbalancedOutput level 6 dB lower than XLR (-5 dBu to +13 dBu @ 0 dBFS)Signal-to-noise ratio (SNR) @ +13 dBu: 120 dB RMS unweighted, 123 dBASignal-to-noise ratio (SNR) @ +1/+7 dBu: 116/119 dB RMS unw., 119/122 dBASignal-to-noise ratio (SNR) @ -5 dBu: 112 dB RMS unweighted, 114 dBAOutput impedance: 100 OhmPhonesAs RCA, but:Output: 6.3 mm TRS jack, unbalanced, stereoOutput impedance: 0.1 OhmSignal-to-noise ratio (SNR) @ +22 dBu: 120 dB RMS unweighted, 123 dBASignal-to-noise ratio (SNR) @ +7 dBu: 118 dB RMS unweighted, 121 dBAOutput level at 0 dBFS, High Power, load 100 Ohm or up: +22 dBu (10 V)Output level at 0 dBFS, Low Power, load 8 Ohm or up: +7 dBu (1.73 V)THD @ +18 dBu, 32 ohm load, 1.2 watts: -120 dB, 0.0001 %THD+N @ + 18 dBu, 32 Ohm Load: -114 dB, 0.0002 %THD @ +14 dBu, 16 Ohm load, 0.94 Watt: -110 dB, 0.0003 %Max power @ 0.001% THD: 1.5 W per channelIEMAs Phones, but:Output level at 0 dBFS: -3 dBu, 0.55 VSignal-to-noise ratio (SNR) @ -3 dBu: 118 dB RMS unweighted, 121 dBAMax power, 8 Ohm, 0.001% THD: 40 mW per channelDIGITALClocks: Internal, SPDIF InJitter suppression of external clocks: > 50 dB (2.4 kHz)Effective clock jitter influence on DA conversion: near zeroPLL ensures zero dropout, even at more than 100 ns jitterAdditional Digital Bitclock PLL for trouble-free varispeed ADAT operationSupported sample rates for external clocks: 28 kHz up to 200 kHzInternally supported sample rates: 44.1 kHz up to 768 kHzGENERALIncluded power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 WattsStandby power consumption: 120 mW (10 mA)Idle power consumption: 7 Watts, Max. power consumption: 18 WattsIdle current at 12 V: 570 mA (6.8 Watts)Dimensions (WxHxD): 215 x 52 x 150 mm (8.5 x 2.05 x 5.9)Weight: 1.0 kg ( 2.2 lbs)Temperature range: +5° up to +50° Celsius (41° F up to 122°F)Relative humidity: < 75%, non condensing
Live search