Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.

Rote RA 062 High Current Stereo Integrated Amplifier Outstanding Sounding Amplifier Shipped by UPS 24 - 48 Hrs Free of charge UK Only OverviewThe RA-1062 is the evolution of Rotel’s highly regarded RA-1060. The design team spent hundreds of hours evaluating individual component performance from input to output. Chief among these improvements is the UK designed and manufactured T-Network power supply capacitor. These premium grade components follow the tradition of our Slit Foil capacitors by incorporating tiny perforations in the capacitor foil to reduce distortion. Even more significantly, the T-Network capacitor has multiple connections that effectively create several smaller capacitors. within a single larger body and thus ensure far lower voltage intermodulation between input and output. The result is a striking portrayal of musical subtleties supported by a deep, well defined and accurate bass-line. The RA-1062 includes a MM phono stage with inputs for Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR remote input, speakers A & B selector, headphone output, balance control, contour switch round out the features of this superbly capable integrated amplifier. SpecificationsContinuous Power Output 60 watts/channel (20-20 kHz, < 0.03%, 8 ohms) Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power, 1/2 power, or 1 watt Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power, 1/2 power or 1 watt Frequency Response Phono Input Line Level Inputs 20Hz-15kHz, ±0.2dB 10Hz-100kHz, +1, –3dB Damping Factor (20-20,000 Hz, 8 ohms) 150 Line Input Sensitivity / Impedance 160 mV / 24 kohms Tone Control Bass Treble +3-4dB at 100 Hz +3dB at 10kHz Line Input Overload 5 V Phono (MM) Sensitivity / Impedance 2.4mV / 47 kohms Input (Phono) Overload 170 mV Preamplifier Output / Impedance 1V / 470 ohms Signal to Noise Ratio (IHF “A” weighted) >95 dB Power Requirements USA: EC: 115 Volts, 60 Hz 230 Volts, 50 HzPower Consumption 300 Watts Dimensions (W x H x D) 433 x 92 x 334mm 17 1/8 x 3 5/8 x 13 1/8 in Front Panel Height 80mm / 3 1/16 in Weight (net) 7.8 kg, 17.2 lbs.