PROAC RESPONSE 1SC IN CHERRY Excellent condition , please see photographs and read description As you can see in the pictures , the foams of both tweeters were replaced by a pair of scanspeak new foams , same as the original ones but without the Proac Logo I only ship within the European Union , no exceptions herePlease see my feedback. I have hundreds of positive feedback but had a problem with a problematic buyer a few weeks ago.This problem has spoiled my % of feedback. You can buy with confidence. Returns are accepted , if you are not fully satisfied with the Speakers you can return and pay only the shipping costs for the delivery and the return.Shipping from Spain , using ebay Germany to attract more potential buyers. Any questions please ask SPECIFICATIONSSpecification Nominal Impedance 8 ohms Recommended Amplifiers 20 to 100 watts Frequency Response 38hz to 30Khz Sensitivity 86db linear for 1 watt at 1 metre Bass/Midrange Driver New five inch unit with special transparent cone. Copper magnet assembly and phase plug mounted on die-cast chassis. High temperature voice coil. Tweeter ProAc three quarter inch dome unit, with honeycomb - wound voice coil. Special damping and ferrofluid-cooled coil assembly. Crossover Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping. Dimensions 12” (305mm) high 7” (178mm) wide 91 ?4” (235mm) deep Weight 18lbs (8kg)/cabinet Mode Stand mounted Grille Acoustically transparent crimplene Finish Available in the following real wood veneers: Black Ash, Maple, Cherry, Mahogany, Yew, Ebony, Bird’s Eye Maple

ProAc Response 1 S Speakers Pair RESPONSE ONE SC used/ Preowned. Fully Testedin Working Orderhas one light scratch on wooden side part of speaker. VERY NICE POWERFUL SOUND! BE SURE TO ENLARGE THE IMAGES FOR A CLOSER LOOK! Please see photosAll items ship with extreme care. I ship using delivery with USPS Any questions, please contact me! SAME DAY FAST SHIPPING!

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

ProAc Response 1SC Speakers Theres little to say about these legendary speakers that hasnt already been said. They have an almost mythical reputation and with good reason too - for they remain unbettered when partnered with tube or class A amplification and are able to produce pure magic with acoustic and spoken word music. Even the ProAc D1 (the model that replaced the 1SC) and ProAc DB1 (the D1s replacement) cannot match the 1SC at their very best. If the 1SC do have a weakness then it is is their need for extraordinarily heavy stands - but sit them on something like Target R2 or R4 speaker stands or Partington Dreadnought or Broadside speaker stands (filled preferably) and they will astonish with their imaging and musicality. Note: these are the revised 1SC model featuring sealed rear panels. Early 1SC speakers have removable rear panels distinguishable by the 12 screws on the back. The revised version supposedly sound a little better. Review: https://www.stereophile.com/standloudspeakers/386/index.html Specs:Type: Two-way, reflex-loaded, stand-mounted minimonitorDrive-units: 0.75 cloth-dome tweeter with honeycomb-wound voice-coil and ferrofluid-cooled coil assembly; 5 polypropylene-cone woofer with high-temperature voice-coilCrossover frequency: 5kHzFrequency response: 38Hz-25kHz, ±3dBImpedance: 8 ohms nominalSensitivity: 86dBRecommended amplification: 20-100WDimensions: 12 H by 7 W by 9.25 DWeight: 36 lbs/pairFinish: mahoganyCondition: Good cosmetic condition and perfect working order. Speakers do have a few small marks typical for their but nothing too bad. Please examine all photos carefully. Both speakers were recently fitted with brand new tweeters which are not yet broken in. The new tweeters have around 5 hours music time. The foam tweeter surrounds are Scan-Speak brand and identical to those that ProAc fit (ProAc buy the foam surrounds from Scan-Speak, print their logo on them, then triple the price - but I didnt fancy paying £30 extra just for the ProAc logo). Binding posts have been treated with Caig ProGold contact cleaner. Auction Details: Photos to come. Collection welcome or will send fully insured by next day delivery. UK bidders only. I will not send these speakers overseas. Sorry. Delivery to Highlands/islands will cost more. Any questions - please ask. Thank you.

Proac Response 1 SC One SC 1Sc Bookshelf Speakers. Some of the finest bookshelf speakers money can buy! Great tone with very realistic portrayal of acoustic instruments and vocals. Very nice wood veneer with just a few imperfections (see photos). Comes with original box and manual. Please note that there is a slight stickiness to the tweeter surrounds if touched, and some of the material will rub off if rubbed firmly. This does not affect the performance and the surrounds can be replaced but I understand it is a fiddly job and that the replacement surrounds would not have the proac logo, so I have left them alone. I will include some tellerium q blue jumper cables if you like. Please let me know via message.

PROAC Response 1sc speakers lovely noxed zebrano pair Track Page Views WithAuctivas Counter

Proac Response 1 SC One SC 1Sc Bookshelf Speakers. Some of the finest bookshelf speakers money can buy! Great tone with very realistic portrayal of acoustic instruments and vocals. Very nice wood veneer with just a few imperfections (see photos). Comes with original box and manual. Please note that there is a slight stickiness to the tweeter surrounds if touched, and some of the material will rub off if rubbed firmly. This does not affect the performance and the surrounds can be replaced but I understand it is a fiddly job and that the replacement surrounds would not have the proac logo, so I have left them alone. I will include some tellerium q blue jumper cables if you like. Please let me know via message.