This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

This where new with rotten rubbers surrender reconed that is why is sell as is

Scan Speak tweeter D2008/851200 dome and Seas 11F-149 Midwoofer - tweeter and mid-woofer in top speakers like ProAc Tablette, Linn, etc.. Ive had this pair from my Tablettes in storage for some time. These both have superb reputations. Not made anymore. Tough to find they both work perfectly (have the proper ohm readings as well). 8 ohms.

Up for sale are two Scan-Speak speaker drivers, model number 18W/8543-00. These drivers feature a clear polycone and are ideal for use in high-end speaker systems. Original rubber surrounds in new condition as shown in pictures. The brand, Scan-Speak, is well-known for producing top-quality audio components. These woofers have a size of 6.5 inches and are compatible with a variety of speaker systems, and ProAc response series speakers. They are perfect for anyone looking to upgrade their home audio setup or build their own speakers from scratch. Dont miss out on the opportunity to own these premium and hard to find speaker drivers in perfect shape. Made in Denmark

ProAc Response 1SC Speakers Theres little to say about these legendary speakers that hasnt already been said. They have an almost mythical reputation and with good reason too - for they remain unbettered when partnered with tube or class A amplification and are able to produce pure magic with acoustic and spoken word music. Even the ProAc D1 (the model that replaced the 1SC) and ProAc DB1 (the D1s replacement) cannot match the 1SC at their very best. If the 1SC do have a weakness then it is is their need for extraordinarily heavy stands - but sit them on something like Target R2 or R4 speaker stands or Partington Dreadnought or Broadside speaker stands (filled preferably) and they will astonish with their imaging and musicality. Note: these are the revised 1SC model featuring sealed rear panels. Early 1SC speakers have removable rear panels distinguishable by the 12 screws on the back. The revised version supposedly sound a little better. Review: https://www.stereophile.com/standloudspeakers/386/index.html Specs:Type: Two-way, reflex-loaded, stand-mounted minimonitorDrive-units: 0.75 cloth-dome tweeter with honeycomb-wound voice-coil and ferrofluid-cooled coil assembly; 5 polypropylene-cone woofer with high-temperature voice-coilCrossover frequency: 5kHzFrequency response: 38Hz-25kHz, ±3dBImpedance: 8 ohms nominalSensitivity: 86dBRecommended amplification: 20-100WDimensions: 12 H by 7 W by 9.25 DWeight: 36 lbs/pairFinish: mahoganyCondition: Good cosmetic condition and perfect working order. Speakers do have a few small marks typical for their but nothing too bad. Please examine all photos carefully. Both speakers were recently fitted with brand new tweeters which are not yet broken in. The new tweeters have around 5 hours music time. The foam tweeter surrounds are Scan-Speak brand and identical to those that ProAc fit (ProAc buy the foam surrounds from Scan-Speak, print their logo on them, then triple the price - but I didnt fancy paying £30 extra just for the ProAc logo). Binding posts have been treated with Caig ProGold contact cleaner. Auction Details: Photos to come. Collection welcome or will send fully insured by next day delivery. UK bidders only. I will not send these speakers overseas. Sorry. Delivery to Highlands/islands will cost more. Any questions - please ask. Thank you.

Up for sale are two Scan-Speak speaker drivers, model number 18W/8543-00. These drivers feature a clear polycone and are ideal for use in high-end speaker systems. The brand, Scan-Speak, is well-known for producing top-quality audio components. These woofers have a size of 6.5 inches and are compatible with a variety of speaker systems, and ProAc response series speakers. They are perfect for anyone looking to upgrade their home audio setup or build their own speakers from scratch. Dont miss out on the opportunity to own these premium and hard to find speaker drivers in perfect shape. Made in Denmark

NOS tweeter MISSION D19 per serie 7 (tipo SCANSPEAK DYNAUDIO PROAC). Tweeter MISSION D19 con cupola morbida da 19mm utilizzato su buona parte della famosa serie 7XX, quella che di fatto ha reso famoso il marchio Inglese. Entrambi i tweeter sono assolutamente originali e praticamente nuovi in quanto erano fondi di magazzino per ricambio (diametro flangia 94mm). Usati solo una volta su un diffusore Mission 760 per verificarne il perfetto funzionamento. Prezzo alla coppia.

I am a recording engineer with a studio in the Twin Cities.  We use the classic ProAc Studio 100's which have been used on thousands of recordings since the 90's for our studio monitors.  They are very rare and expensive, so I thought I would give their predecessors a try, which are these ProAc Studio 1's.  My findings are: The cabinets for the Studio 100's & Studio 1's are exactly the same, no difference except tweeters are offset on the 100’s.  The woofers are pretty much the same also.  The big difference is in the crossovers and tweeters.  The tweeters in the Studio 100's use a fabric tweeter very pleasing, the studio 1's use a metal titanium tweeter, much too harsh for my taste.  The crossovers are very different also, besides the obvious fact you can bi-amp the 100's, the 1'syou cannot, also the crossover points are very different.  So I purchased the replacement tweeters from Seas (see picture) for the Studio 100's and added a tweeter volume knob on the backs (see picture).  I replaced the ProAc crossovers with the Eminence PXB crossovers ($80.00 each see picture) , they have the closest specs to the Studio 100 crossovers of any I could find. The result is the speakers sound unbelievable, not exactly like the 100's but very close at a fraction of the cost.  I am including the original tweeters and crossovers all in working condition for this price.  One of the speakers I did route out around the tweeter to fit the new tweeter.  But the old tweeters will fit right in as usual same mounting screws. The grills are in excellent shape.  Cherry veneer.

NOS tweeter MISSION D19 per serie 7 (tipo SCANSPEAK DYNAUDIO PROAC). Tweeter MISSION D19 con cupola morbida da 19mm utilizzato su buona parte della famosa serie 7XX, quella che di fatto ha reso famoso il marchio Inglese. Entrambi i tweeter sono assolutamente originali e praticamente nuovi in quanto erano fondi di magazzino per ricambio (diametro flangia 94mm). Usati solo una volta su un diffusore Mission 760 per verificarne il perfetto funzionamento. Prezzo alla coppia.

Proac Response 1 SC One SC 1Sc Bookshelf Speakers. Some of the finest bookshelf speakers money can buy! Great tone with very realistic portrayal of acoustic instruments and vocals. Very nice wood veneer with just a few imperfections (see photos). Comes with original box and manual. Please note that there is a slight stickiness to the tweeter surrounds if touched, and some of the material will rub off if rubbed firmly. This does not affect the performance and the surrounds can be replaced but I understand it is a fiddly job and that the replacement surrounds would not have the proac logo, so I have left them alone. I will include some tellerium q blue jumper cables if you like. Please let me know via message.

PROAC Response 1sc speakers lovely noxed zebrano pair Track Page Views WithAuctivas Counter

Proac Response 1 SC One SC 1Sc Bookshelf Speakers. Some of the finest bookshelf speakers money can buy! Great tone with very realistic portrayal of acoustic instruments and vocals. Very nice wood veneer with just a few imperfections (see photos). Comes with original box and manual. Please note that there is a slight stickiness to the tweeter surrounds if touched, and some of the material will rub off if rubbed firmly. This does not affect the performance and the surrounds can be replaced but I understand it is a fiddly job and that the replacement surrounds would not have the proac logo, so I have left them alone. I will include some tellerium q blue jumper cables if you like. Please let me know via message.

NOS tweeter MISSION D19 per serie 7 (tipo SCANSPEAK DYNAUDIO PROAC). Tweeter MISSION D19 con cupola morbida da 19mm utilizzato su buona parte della famosa serie 7XX, quella che di fatto ha reso famoso il marchio Inglese. Entrambi i tweeter sono assolutamente originali e praticamente nuovi in quanto erano fondi di magazzino per ricambio (diametro flangia 94mm). Usati solo una volta su un diffusore Mission 760 per verificarne il perfetto funzionamento. Prezzo alla coppia.

NOS tweeter MISSION D19 per serie 7 (tipo SCANSPEAK DYNAUDIO PROAC). Tweeter MISSION D19 con cupola morbida da 19mm utilizzato su buona parte della famosa serie 7XX, quella che di fatto ha reso famoso il marchio Inglese. Entrambi i tweeter sono assolutamente originali e praticamente nuovi in quanto erano fondi di magazzino per ricambio (diametro flangia 94mm). Usati solo una volta su un diffusore Mission 760 per verificarne il perfetto funzionamento. Prezzo alla coppia.