RÉGULATEUR RWX447  REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, esRÉGULATEUR RWX447  REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, es

BOUTONS DE COMMANDE DU MÉCANISME GCMK-77X REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, esBOUTONS DE COMMANDE DU MÉCANISME GCMK-77X REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, es

TP H4 HB RWX 444 PLAQUE DE TRANSFORMATEUR DE REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, es TP H4 HB RWX 444 PLAQUE DE TRANSFORMATEUR DE REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, es

RÉGULATEUR RWX 449 RNP 858  REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, esRÉGULATEUR RWX 449 RNP 858  REMPLACEMENT POUR PIONNIER CT-F1050 Si vous cherchez une pièce, vous pouvez nous demander, et nous essayons de la trouver. Si vous cherchez une pièce, vous pouvez nous demander, et nous essaierons de la trouver. Wenn Sie nach einem Stück suchen, können Sie uns fragen und wir werden versuchen, es

This listing is for an original item, printed in Japan, check pictures for details, check other listing for more vintage original owners manual, service manual, catalogues, schematics, we will combine shipping on multiple manuals,will be packed well for shipping, email if any questions,Thank you

PIONEER SX-1050 RECEIVER POWER AMPLIFIER ASSEMBLY BOARD AWH-047 WITH ALL 8 GOOD ORIGINAL TRANSISTORS AND HEAT SINK ANY QUESTIONS PLEASE FEEL FREE TO ASK

Die Kondensatoren stammen aus einem Pioneer sx1050 und funktionieren einwandfrei. Da Privatverkauf keine Garantie oder Rcknahme.

I have here a vintage Pioneer SX-1050 receiver. I have tested this unit well. I am 90% sure it has a secondary power supply problem. Why, I am a technician and I have confirmed the following...... Tuner tests well and pulls in Stereo (see pic).Phono stage works well. Tested. I have +/- 61 Volts on the main B+ supply which is perfect. The unit will not come out of protection and the line stage preamp doesnt work either. The voltage on the emitter (output) is 6volts. Very odd value and what confirms to me it is a common power supply issue is that the oddball voltages in the power amp section are 100% identical in both the left and the right chs. If you are a techy guy at all you know that points to the only thing common to the two amps...... power supply. Again, main supply is perfect at +/- 61 volts. I am very certain if you have the time and $50 it can be repaired by installing all caps, transistors, etc. in that supply board. There are several fellows selling kits on ebay at very reasonable prices. The front face is surprisingly clean but some dings are on the top of the face. Some damage as well on the back corners of the wood. Knobs and switches have been cleaned and look fantastic. I wish I had the time for a project like this. I will only ship internationally if you use ebays Intl shipping. NOTHING direct.

I have here a vintage Pioneer SX-1050 receiver. I have tested this unit well. I am 90% sure it has a secondary power supply problem. Why, I am a technician and I have confirmed the following...... Tuner tests well and pulls in Stereo (see pic).Phono stage works well. Tested. I have +/- 61 Volts on the main B+ supply which is perfect. The unit will not come out of protection and the line stage preamp doesnt work either. The voltage on the emitter (output) is 6volts. Very odd value and what confirms to me it is a common power supply issue is that the oddball voltages in the power amp section is 100% identical in both the left and the right chs. If you are a techy guy at all you know that points to the only thing common to the two amps...... power supply. Again, main supply is perfect at +/- 61 volts. I am very certain if you have the time and $50 it can be repaired by installing all caps, transistors, etc. i that supply board. There are several fellows selling kits on ebay at very reasonable prices. The front face is surprisingly clean but some dings are on the top of the face. Some damage as well on the back corners of the wood. Knobs and switches have been cleaned and look fantastic. I wish I had the time for a project like this. I will only ship internationally if you use ebays Intl shipping. NOTHING direct.

I have here a vintage Pioneer SX-1050 receiver. I have tested this unit well. I am 90% sure it has a secondary power supply problem. Why, I am a technician and I have confirmed the following...... Tuner tests well and pulls in Stereo (see pic).Phono stage works well. Tested. I have +/- 61 Volts on the main B+ supply which is perfect. The unit will not come out of protection and the line stage preamp doesnt work either. The voltage on the emitter (output) is 6volts. Very odd value and what confirms to me it is a common power supply issue is that the oddball voltages in the power amp section is 100% identical in both the left and the right chs. If you are a techy guy at all you know that points to the only thing common to the two amps...... power supply. Again, main supply is perfect at +/- 61 volts. I am very certain if you have the time and $50 it can be repaired by installing all caps, transistors, etc. i that supply board. There are several fellows selling kits on ebay at very reasonable prices. The front face is surprisingly clean but some dings are on the top of the face. Some damage as well on the back corners of the wood. Knobs and switches have been cleaned and look fantastic. I wish I had the time for a project like this. I will only ship internationally if you use ebays Intl shipping. NOTHING direct.

This listing is for an original item, printed in Japan, check pictures for details, check other listing for more vintage original owners manual, service manual, catalogues, schematics, we will combine shipping on multiple manuals,will be packed well for shipping, email if any questions,Thank you

Up for sale is a very nice, properly working Pioneer SX-1050 solid state stereo receiver. It easily puts out its rated power 120 watts per channel into 8 ohms on our Sound Technology test panel. It came to us in very clean condition but we did a light clean up on the outside. The inside was almost spotless as we received it. It works great after we: > Cleaned the pots, switches and tuner cap bearings with Caig Labs deOxit. >Replaced some lamps with warm white LEDs. >Changed bad speaker relay. Note that power switch is 100% functional but a little sticky mechanically. We ran music through it for a few hours and it worked as it should. Also tested cold the next morning and still all OK! Not fully restored but tested carefully We consider it plug and play as it sits. Were giving it a strong 7.5, maybe an 8 on a 1-10 scale for cosmetic condition, just a few minor blemishes here and there. A few dings on the wood cabinet are the biggest issue. It will be very well packed with and double boxed for extra protection. We promise it will arrive working properly and exactly as described No long term guarantee beyond that. Shipping to the USA only unless youre using eBay Global Shipping program. The Sound Well has been selling Vintage Home Stereo Components in Berkeley since 1974 under mostly same ownership. Local pick up in Berkeley is fine if prepaid. Since were now operating without a storefront we are unable to offer audition of the piece. Note that eBay is now collecting sales tax for the state of the buyer where applicable. FedEx only if shipped. Thanks for looking

PIONEER SX 1050 Stéréo Récepteur 120 + 120 Watts RMS Vintage 1976 Work Good LookCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. PIONEER SX-1050 Ampli Stéréo 120 + 120 Watts RMS Vintage 1976 TRAVAIL Bon Look Fonctionne parfaitement, al remis à neuf Pioneer SX-1050 Récepteur stéréo AM/FM (1976-78) Description Haute sensibilité, conception de circuit exceptionnelle dans un nouveau récepteur AM/FM. Le Pioneer SX-1050 rassemble toutes les fonctionnalités importantes du récepteur AM/FM dans un ensemble étonnamment beau. Dun frontal FM très sensible, une section IF à haute sélectivité, à la section damplificateur de grande puissance à faible distorsion qui délivre une puissance de sortie continue exceptionnelle de 120 watts par canal min RMS à 8 ohms de 20 à 20 000 Hz, avec pas plus de Avec une distorsion harmonique totale de 0,1 %, le SX-1050 dégage lexcellence que le passionné de stéréo attend de lélectronique Pioneer . Des caractéristiques telles quun circuit intégré à boucle à verrouillage de phase dans la section MPX, le commutateur multivoie audible qui aide à éliminer les interférences dondes FM et la section dégalisation très avancée ne sont pas seulement des touches supplémentaires dans ce récepteur, mais illustrent la réflexion considérable qui a été appliquée au conception générale et circuit du SX-1050. Dautres contributions importantes à un son impeccable incluent le Pioneer Twin Tone Control, le transformateur à noyau toroïdal, les deux très gros condensateurs dans la section dalimentation - tous calculés pour reproduire le spectre sonore avec stabilité et protection complète des composants dans le style inimitable Pioneer . Caractéristiques Plage de syntonisation : FM, MW Puissance de sortie : 120 watts par canal dans 8? (stéréo) Réponse en fréquence : 10 Hz à 50 kHz Distorsion harmonique totale : 0,1 % Facteur damortissement : 25 Sensibilité dentrée : 6,5 mV (micro), 2,5 mV (MM), 150 mV ( DIN ), 150 mV (ligne) Rapport signal sur bruit : 75 dB (MM), 90 dB (ligne) Sortie : 150 mV (ligne), 30 mV ( DIN ), 1 V (pré-sortie) Semi-conducteurs : 4 x FET, 5 x IC, 79 x transistors, 49 x diodes Dimensions : 526,6 x 173 x 453,5 mm Poids : 23,4 kg Année : 1976Dun frontal FM très sensible, une section IF à haute sélectivité, à la section damplificateur de grande puissance à faible distorsion qui délivre une puissance de sortie continue exceptionnelle de 120 watts par canal min RMS à 8 ohms de 20 à 20 000 Hz, avec pas plus de Avec une distorsion harmonique totale de 0,1 %, le SX-1050 dégage lexcellence que le passionné de stéréo attend de lélectronique Pioneer . Des caractéristiques telles quun circuit intégré à boucle à verrouillage de phase dans la section MPX, le commutateur multivoie audible qui aide à éliminer les interférences dondes FM et la section dégalisation très avancée ne sont pas seulement des touches supplémentaires dans ce récepteur, mais illustrent la réflexion considérable qui a été appliquée au conception générale et cir Alto 173mm Marca compatible Para Pioneer Garantía del fabricante Sin garantía Modelo compatible SX-1050 Tipo Receiver Color Plata Marca Pioneer Tipo de unidad Unidad Año de fabricación 1976-1978 País/Región de fabricación Japón Cantidad de unidades 1 Modelo SX 1050 Peso 23,4Kg Longitud 453,5mm Ancho 526,6mm

Used.Tested.Original.Sols as is. Missing part of toggle shaft. works.Will work for many SX receivers and SPEC .

PIONEER SX1050 SX1250 BALANCE CONTROL POTENTIOMETER AVC-163 EXCELLENT CONDITION SUPER CLEAN AND TIGHT, ALSO CLEANED WITH DEOXIT

PIONEER SX 1050 ALPS VOLUME CONTROL POTENTIOMETER IN EXCELLENT CONDITION. # AVC-169-A THIS WAS PULLED FROM A WORKING UNIT WITH COSMETIC ISSUE THAT WOULD NEVER BE REVERSED. I LIKE TO TRY TO KEEP THESE UP AND RUNNING AS WE KNOW THEY WILL NEVER BE PRODUCED AGAIN. IT MAKES ME SAD TO HAVE TO BUST ONE DOWNBUT IT WILL ALSO BE GOOD FOR THE PERSON THAT NEEDS ONE.

PIONEER SX 1050 Stereo Receiver Vintage 1976 Great Cond. The one owner was an older man so the stereo has basically been sitting. Its loud and crisp and has a lot of power, as do the sp-3500s I have listed . You can hear the set up on TT. I would very much like to talk on the phone after the auction so I can do a live video of the stereos performance. You can also watch me pack it, and give me any instructions as to which way I should ship. I will insure it 100% Good luck , Conrad

Pioneer SX-1250 SX-1280 SX-1980 Control Rotary Balance ACV-163. File Photo. This came out of an SX-1250. Parts could fit other different Applications and Receivers. Do your homework. We do not guarantee it will fit your particular receiver. (((Part is guaranteed to be operational.))) Contact for return must be with in 14 days of purchase. Customer pays shipping for refund regardless of issue!! Part will be marked to prevent part swapping. (Shipping Lower 48 US Ony!) Guarantee is void if damaged or tampered with. Sale is only for the part listed only. Feedback is reciprocated after receiving usually with in 30 days. (((Photos may not always be of the exact part being sold due to many items of the item pictured being listed at one given time.))) ******We Suggest all boards be recapped before installation regardless of condition!!! ***********We also suggest all switches be cleaned and lubed before installation!!! ****************Contact us ASAP with questions or concerns before purchase!!!

PIONEER SX 1050 Stereo Receiver & Pair Sansui SP-3500 Vintage 1976 Great Cond. The one owner was an older man so the stereo has basically been sitting all these years. Just watched same unit go for 1900, thats $700 for driving. I put best offer because Ill sell the unit for $1200. The speakers go for 3-400 each, but Ive seen them at $500. So for $300 more you get $600 value on speakers. Savings of $300 on the low end. Thats $1000 for driving. I would drive to anyones house for a grand.

PIONEER SX-1050 RECEIVER TUNING FRONT END CIRCUIT BOARD ASSEMBLY as pictured, it pulled, untested (working condition is unknown) Note: Since this item is highly “MISHANDLING SENSITIVE” hence it is intends for professional (service tech / skilled audio hobbyist) and it is final (no return or refund) Please buy or bid accordingly. Thanks for looking.

PIONEER SX-1050 RECEIVER LARGE TUNING CONTROL KNOB as pictured, it pulled, in good condition as shown (its 1.5mm set screw intact) This selling is final (no return or refund) Please buy or bid accordingly. Thanks for looking. FYI: This tuning control knob also fit or compatible with Pioneer model SX-1250.