Piezo/Sumter tonearm used for 5 hours . This is a drop in replacement for Rek O Kut tonearms. This was a NOS tonearm when I bought it back in March of this year, and I’ve only used it for 10 hours or less . I won’t be needing this as I’ve acquired a good ROK tonearm.

Piezo PU- 402 Syntec S-220 tone arm. Condition is New Old Stock. The PU-402 is so designed with the consideration on easy manipulations and practicality, at the same time care being taken not to spoil the maximum tracing ability. A light alloy headshell and pipe arm are used to ensure overall light weight and proper balance of the arm and stylus position. The lateral balance is finely adjustable to cope with the situation when used with different weight cartridges. The removable headshell is of the international standard 4-pin plug. Any cartridges conforming to EIS or JIS standards are attachable to this tonearm, The Japan Piezo model Y-940 is recommended. A precision miniature ball bearing is employed to enable the arm to function smoothly even in minute pressure for the rotary function; the weight of the arm is greatly enhanced due to this design. The stylus pressure is adjustable from 4 to 14g by moving the main weight back and forth. Arm height is adjustable from 40 to 60mm (from VinylEngine.com) On Apr-04-20 at 18:23:41 PDT, seller added the following information: Addendum: The tone arm pictured is from an earlier auction, The one you are bidding on is in the same condition and includes everything you see pictured.

Piezo PU- 402 Syntec S-220 tone arm. Condition is New Old Stock. The PU-402 is so designed with the consideration on easy manipulations and practicality, at the same time care being taken not to spoil the maximum tracing ability. A light alloy headshell and pipe arm are used to ensure overall light weight and proper balance of the arm and stylus position. The lateral balance is finely adjustable to cope with the situation when used with different weight cartridges. The removable headshell is of the international standard 4-pin plug. Any cartridges conforming to EIS or JIS standards are attachable to this tonearm, The Japan Piezo model Y-940 is recommended. A precision miniature ball bearing is employed to enable the arm to function smoothly even in minute pressure for the rotary function; the weight of the arm is greatly enhanced due to this design. The stylus pressure is adjustable from 4 to 14g by moving the main weight back and forth. Arm height is adjustable from 40 to 60mm (from VinylEngine.com) On Apr-04-20 at 18:23:41 PDT, seller added the following information: Addendum: The tone arm pictured is from an earlier auction, The one you are bidding on is in the same condition and includes everything you see pictured.

Piezo PU- 402 Syntec S-220 tone arm. Condition is New Old Stock. The PU-402 is so designed with the consideration on easy manipulations and practicality, at the same time care being taken not to spoil the maximum tracing ability. A light alloy headshell and pipe arm are used to ensure overall light weight and proper balance of the arm and stylus position. The lateral balance is finely adjustable to cope with the situation when used with different weight cartridges. The removable headshell is of the international standard 4-pin plug. Any cartridges conforming to EIS or JIS standards are attachable to this tonearm, The Japan Piezo model Y-940 is recommended. A precision miniature ball bearing is employed to enable the arm to function smoothly even in minute pressure for the rotary function; the weight of the arm is greatly enhanced due to this design. The stylus pressure is adjustable from 4 to 14g by moving the main weight back and forth. Arm height is adjustable from 40 to 60mm (from VinylEngine.com) On Apr-04-20 at 18:23:41 PDT, seller added the following information: Addendum: The tone arm pictured is from an earlier auction, The one you are bidding on is in the same condition and includes everything you see pictured.

Piezo PU- 402 Syntec S-220 tone arm. Condition is New Old Stock. The PU-402 is so designed with the consideration on easy manipulations and practicality, at the same time care being taken not to spoil the maximum tracing ability. A light alloy headshell and pipe arm are used to ensure overall light weight and proper balance of the arm and stylus position. The lateral balance is finely adjustable to cope with the situation when used with different weight cartridges. The removable headshell is of the international standard 4-pin plug. Any cartridges conforming to EIS or JIS standards are attachable to this tonearm, The Japan Piezo model Y-940 is recommended. A precision miniature ball bearing is employed to enable the arm to function smoothly even in minute pressure for the rotary function; the weight of the arm is greatly enhanced due to this design. The stylus pressure is adjustable from 4 to 14g by moving the main weight back and forth. Arm height is adjustable from 40 to 60mm (from VinylEngine.com) On Apr-04-20 at 18:23:41 PDT, seller added the following information: Addendum: The tone arm pictured is from an earlier auction, The one you are bidding on is in the same condition and includes everything you see pictured.

Piezo PU- 402 Syntec S-220 tone arm. Condition is New Old Stock. The PU-402 is so designed with the consideration on easy manipulations and practicality, at the same time care being taken not to spoil the maximum tracing ability. A light alloy headshell and pipe arm are used to ensure overall light weight and proper balance of the arm and stylus position. The lateral balance is finely adjustable to cope with the situation when used with different weight cartridges. The removable headshell is of the international standard 4-pin plug. Any cartridges conforming to EIS or JIS standards are attachable to this tonearm, The Japan Piezo model Y-940 is recommended. A precision miniature ball bearing is employed to enable the arm to function smoothly even in minute pressure for the rotary function; the weight of the arm is greatly enhanced due to this design. The stylus pressure is adjustable from 4 to 14g by moving the main weight back and forth. Arm height is adjustable from 40 to 60mm (from VinylEngine.com) On Apr-04-20 at 18:23:41 PDT, seller added the following information: Addendum: The tone arm pictured is from an earlier auction, The one you are bidding on is in the same condition and includes everything you see pictured.