Ask for shipping costs before purchasing. For buyers from the European Union, shipping from Poland is possible. You will not pay customs taxes. Top model. Excellent technical and cosmetic condition. Built-in DAC TDA1541A Output power: 80 watts per channel into 8 ohms (stereo) Frequency response: from 10 Hz to 50 kHz Total harmonic distortion: 0.03% Input sensitivity: 0.025 mV (MC), 2.5 mV (MM), 150 mV (line) Signal to noise ratio: 70 dB (MC), 80 dB (MM), 85 dB (line) Channel separation: 45 dB (line) Output: 450 mV (line) Dimensions: 420 x 118 x 334 mm Weight: 10 kg. 220V

For sale: Philips DFA-888 digital Integrated Amplifier. The topmodel amplifier matching the famous Philips CDD-882 drive. Amp is in excellent state and visual also near mint condition.With 2 x 85 watt enough power to drive most speakers. Philips FA888Digital Integrated AmplifierSpecificationsPower output: 85 watts per channel into 8? (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.02%Input sensitivity: 0.25mV (MC), 2.5mV (MM), 150mV (line)Signal to noise ratio: 72dB (MC), 83dB (MM), 89dB (line)Output: 450mV (line)Speaker load impedance: 8? (minimum)Digital inputs: optical, coaxialDimensions: 420 x 118 x 334mmWeight: 10.5kg Please do not hesitate to contact me regarding this offer or if you need more precise shipping and packing costs. Feel free to subscribe my account to receive more interesting vintage offers in audio gear and speaker parts.Happy bid!

Excellent condition. Two tiny paint chips in front face are touched up, see close-up pic. Twin TDA1541A-S1 (Single Crown) DACs.Great phono stage switchable for moving magnet MM or moving coil. Brand new remote control is a clone of the Marantz PM75 unit, tested to work for all functions of the original. Inputs: Phono, Aux 1, Aux 2, Tape 1, DAT/Tape 2, DBS/Tuner Digital Inputs: 2 Coaxial and 1 Coaxial or Optical Output power (20Hz - 20kHz) 100W+100W (8ohms) 120W+120W (6ohms) Dynamic power 220W+220W (2ohms) 180W+180W (4ohms) 150W+150W (6ohms) THD (20Hz - 20kHz, 8-ohm load intensity) 0.008% Cross modulation distortion (SMPTE) 0.008% Output bandwidth (an 8-ohm load intensity, THD 0.03%) 10Hz - 50kHz Frequency characteristic 10Hz - 150kHz, and +0 -3 dB Input sensitivity/impedance Phono MC: 250 microvolts/150 ohms Phono MM: 2.5mV/47kohm High SFT Level: 150mV/20kohm Phono maximum permissible input (1kHz) MC: 20mV MM: 200mV RIAA deflection (20Hz - 20kHz) ±0.3dB S/N ratio (A network) Phono MC:72dB Phono MM:83dB High Level:105dB Tone control Bass: 100Hz, ±8dB Treble: 10kHz, ±8dB Digital-analog-converter Digital sampling frequency 32kHz, 44.1kHz, 48kHz S/N ratio (EIAJ) 106dB Distortion (EIAJ) 0.0035% Dynamic range 96dB Digital input Coaxial: 0.5 Vp-p/75ohms Optical: -15--25dBm Digital output Coaxial: 0.5 Vp-p/75ohms Power source 100V, SpecificationsPower output: 100 watts per channel into 8? (stereo) Frequency response: 10Hz to 150kHz Total harmonic distortion: 0.008% Input sensitivity: 0.25mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 83dB (MM), 105dB (line) Speaker load impedance: 4? to 16? Digital inputs: coaxial, optical Dimensions: 454 x 151 x 379mm Weight: 16.8kg (37.3 lbs.) Accessories: remote control Year: 1989

WELCOME TO AMP KING AUCTIONS Philips DFA-888 Integrated amplifier Excellent all rounder from the master of electronics..Philips! This little champ can pump out 85 watts into 8 ohms. I noted some high quality Toshiba output transistors. TDA1541A DAC on board. Arguably the best DAC chip in the world. Optical and coax inputs. Upto 48KHZ signal Decent phono stage and headphone section. The mainboard had all the preamp and opamp section diodes changed to schottky. All premium caps Nichicon Fine Gold, Nichicon KA, Nichicon Muse, polystyrene and wima. The caps were carefully selected for each section. The main smoothing caps are Chemicaon KMH series. Long time favourite, high ripple! All the low grade ceramics were replaced too. The DAC board is TDA1541A in NOS (no oversampling) mode. All high end caps. Premium grade film caps around DAC chip and all audiopath caps, mostly polystyrene! Got rid of 99% of ceramics! Im a bit of an expert on DACs so expect something mind blowing, especially the TDA DACs. In short the DAC on this amp is as good as TDA based CD players costing £500 and much more! So in theory all vintage Marantz, Philips, Quad mid 80s to 90s this amplifier will beat! I would know wouldnt I. The phono section blah blah high end caps etc same with headphone. I changed the speaker terminals to allow banana plug connection and they gold plated. Previous terminals were a joke in todays standard! The tone section was also upgraded. So every single section got high end caps. Audiopath got more special caps. 90% of diodes are schottky. Every single joint, yes every single one got resoldered! Let me see what else? Oh yes all the bulbs got replaced, IEC main filter fitted. Im sure theres more.....Bias adjusted..All contacts cleaned, relay cleaned..New thermal paste on smaller regulators... Ok I think thats it LOL Sound is very crisp, detailed and lively. Let the DAC warm up for 30 minutes and connect your supposed high end cd player in the amp via digital cable NOT analogue and enable the DAC on the amp and just be blown away with the TDA DAC sound quality. Connect your TV and the voice will be crisp as the TDA DAC excels in mid range sound quality. Very life like. So basically your getting an amazing amplifier on its own worth easy £3-400 in terms of sound quality and a DAC which is built in but seperate would cost easy £400+ This is a highly upgraded item and it guarantees satisfaction. Buy with confidence. Its a shame as the condition could have been better but thats beyond my control unfortunately. See my other items I offer 1 month free repair on all my items even though they are thoroughly tested before shipping for peace of mind. I dont like unhappy customers! After 1 month or even years later I will offer low rate repair costs on all my items purchased regardless of fault. Buyer is responsible for all shipping costs.