Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.

Unit appears complete except for decorative caps missing on pushbuttons and tuning knob. The unit is non fuctional. The power supply appears to be working, but there is no output. I dont have the time to troubleshoot it. It covers the following bands:LW : 150-400 KcMW : 550-1500+ KcSW: : 6-18 Mc FM - 87.5-104+ Mc (Note, the dial markings for MW and FM bands extends beyond the listed figure but is the last printed frequency on the dial. The MW scale highest marked calibration is 190 meters. 200 m is at the 1500 Kc mark. This model is a tuner only. Philips did make a similar unit with a built-in amplifier. It has a wire FM antenna, but no AM/SW antenna, also audio connections are via a DIN connector. Top of the case is wood finish, the bottom as shown is particle board and the two front legs were missing and had pulled out of the particle board which is patched.