Used in hi-end audio gear, professionally removed using hot-air from a circuit board they were sitting on as shown on the second pic and tested (also auditioned before the removal - they sound excellent!), all chips have the same serial numbers (same batch) C0042B. This is original BB production. This is the last pair of this batch available. Price for 1 pair=2pcs Grab them while they are available, they are becoming scarce. Beware of fakes! No returns because this is a private sale, but I guarantee they work excellent, check my feedback and buy with confidence.Shipping in the anti-static, protective packaging. Shipping cost given for Europe - if you need them to be shipped worldwide contact me to check actual cost BEFORE buying. I combine shipping - check my other listings and wait for the corrected invoice (do not finalize payment directly after buying if you intend to have shipping costs combined)

The Primare CD32 CD Player uses top-rated Burr-Brown PCM1704-K R2R multibit DAC chips. This unit cannot be used as DAC. It does not have any digital inputs. Audio grade laser-trimmed multibit R2R DAC chips aren’t made anymore. This is your chance to get one of the best sounding and measuring CD players. The Primare CD32 offers excellent measured performance, but I keep coming back to that superb error correction. After all, a CD players most fundamental task is to get the data off the disc, no matter how damaged that disc might be. —John Atkinson New Belt installed. Remote control and extra laser assembly is included. Generic US power cord is included. There are blemishes on the enclosure. The blemishes are barely noticeable from the listening position, and they are hard to photograph. I will try to point out as many as I can in the photographs.

The Primare CD31 CD Player uses top-rated Burr-Brown PCM1704-K R2R multibit DAC chips. This unit cannot be used as DAC. It does not have any digital inputs. Audio grade laser-trimmed multibit R2R DAC chips aren’t made anymore. This is your chance to get one of the best sounding and measuring CD players. Primares CD31 offers state-of-the-art Red Book CD performance.—John Atkinson New Belt installed. I will supply the original belt and an extra belt. Remote control is included. Generic US power cord is included (not pictured). There are blemishes on the enclosure. The blemishes are barely noticeable from the listening position, and they are hard to photograph. I will try to point out as many as I can in the photographs.

PCM1704 Burr Brown original DAC ICs, same batch Fachgerecht aus einem funktionierenden Gerät entnommen. - Insgesamt 10 Stück lieferbar. Sie bieten auf 1 Stück. Used, 100% genuine Burr Brown (TI) PCM1704 pcm converter, hard to get, NO China fake! 10 pieces available - your bid is for 1 piece.

The SMSL VMV D3 is a high-end R2R DAC that uses four PCM1704U-J chips, a balanced design and an isolated power supply. It supports up to 32-bit 768khz and native DSD 512. This model normally retails for $3499 new and the lowest price currently available that I found in a quick online search was $3149. Since mine is used, of course I’m selling it for much less that that. However, it hasn’t given me any problems since I bought it used but in like-new condition from TMR Audio a little over a year ago—it still works and looks great and I’ll pack it in the original box, with the same packing materials used by TMR when they sent it to me. The only (very) minor issue I’ve had with this DAC is that I couldn’t get the included remote to work. I bought a generic SMSL remote as a replacement and this replacement remote has worked for me without any problems ever since. I’ll include both we the working replacement remote and the original remote with the DAC. There are 5 input options: USB, Digital Coaxial RCA, Digital Optical TOSLINK, AES/EBU and I2S. There’s also an option to use an external clock, if desired, although it already comes with an internal clock system that’s very good. I’ve mostly connected the USB input directly into my MacBook or Mac Mini, but I’ve also used the other inputs via a Singxer SU-6 DDC. The SMSL VMV D3 includes 2 audio output options, Digital Coaxial RCA and XLR, both of which I’ve tested recently and found to be working fine. As with most higher-end DACs, it’s expected that the user will provide their own cables, so only a generic USB cable (still unopened) was included in the package when I bought it. I’ll obviously include this USB cable and if you also need a basic power cord, just let me know and I’ll include one free of charge. This DAC has many interesting features and options and the manual goes into much more detail; it can be accessed online at this link: https://www.smsl-audio.com/themes/pc_en/public/assets/js/pdf/web/viewer.html?file=/upload/portal/download/VMVD3Manual.pdf This SMSL VMV D3 has served me well, but I’ve collected too much audio equipment since getting into this hobby and now I’m looking to downsize.

The SMSL VMV D3 is a high-end R2R DAC that uses four PCM1704U-J chips, a balanced design and an isolated power supply. It supports up to 32-bit 768khz and native DSD 512. This model normally retails for $3499 new and the lowest price currently available that I found in a quick online search was $3149. Since mine is used, of course I’m selling it for much less that that. However, it hasn’t given me any problems since I bought it used but in like-new condition from TMR Audio a little over a year ago—it still works and looks great and I’ll pack it in the original box, with the same packing materials used by TMR when they sent it to me. The only (very) minor issue I’ve had with this DAC is that I couldn’t get the included remote to work. I bought a generic SMSL remote as a replacement and this replacement remote has worked for me without any problems ever since. I’ll include both we the working replacement remote and the original remote with the DAC. There are 5 input options: USB, Digital Coaxial RCA, Digital Optical TOSLINK, AES/EBU and I2S. There’s also an option to use an external clock, if desired, although it already comes with an internal clock system that’s very good. I’ve mostly connected the USB input directly into my MacBook or Mac Mini, but I’ve also used the other inputs via a Singxer SU-6 DDC. The SMSL VMV D3 includes 2 audio output options, Digital Coaxial RCA and XLR, both of which I’ve tested recently and found to be working fine. As with most higher-end DACs, it’s expected that the user will provide their own cables, so only a generic USB cable (still unopened) was included in the package when I bought it. I’ll obviously include this USB cable and if you also need a basic power cord, just let me know and I’ll include one free of charge. This DAC has many interesting features and options and the manual goes into much more detail; it can be accessed online at this link: https://www.smsl-audio.com/themes/pc_en/public/assets/js/pdf/web/viewer.html?file=/upload/portal/download/VMVD3Manual.pdf This SMSL VMV D3 has served me well, but I’ve collected too much audio equipment since getting into this hobby and now I’m looking to downsize.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Up for sell, my new and genuine Burr-Brown PCM1704-K. I bought these ICs from Alpine as spare part then I will list them as parts for those who need for their project. Seen theyre new in package so they couldnt be tested. One purchase is for one Burr-Brown PCM1704-K I have 7 available and $168 each plus shipping Final Stock. No Longer Available When Gone Pics were taken just before list for this auction. I ship worldwide via DHL express (Tracking# provided). Sold as is. No Return

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

PCM1704 Burr Brown original DAC Original PCM1704, gebraucht, 100% working. Kein China Schrott. Used PCM1704, desoldered from working DAC, 100% working, no china fake! 8 pieces available.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.