This item was re-tipped in 2021 by VAS and hasn’t been used more than 100 hours since. In great shape!

Ortofon Cadenza Bronze w/ new boron line contact- Now has the same stylus and cantilever with a Cadenza Black- Comes with guard but no original box. - body is clean- coils check out working. Will play test again before shipment- I am open to fair offers- MSRP is $2700 Specification:Output: 0.4mVChannel balance: < 1 dBChannel separation: 24 dBFrequency range at - 3dB: 20Hz-55kHzTracking ability: 80 µmCompliance: 12 µm/mNTracking force range: 2.2-2.7g, 2.5g recommendedTracking angle: 23°Internal impedance: 5 OhmRecommended load impedance: 50-200 OhmBody material: Stainless steel/aluminumBody color: Black with Bronze accentsCartridge weight 10.7g

PREOWNED - $2700 LIST! - FULLY TESTED - INCLUDES ORIGINAL BOX, CASE, NEEDLE GUARD, HARDWARE, SCREW DRIVER, MANUALRomantic-Sounding Ortofon Cadenza Bronze MC PhonoCartridge Astounds in All Crucial Areas: Superb Neutrality, Transparency,Resolution, Tracking, Dynamics, Imaging, and MoreA reference MC cartridge by anymeasure, Ortofons Cadenza Bronze conveys music with smashingprecision, musicality, and dynamics. Employing a Replicant 100 stylus, conicalaluminum cantilever, and Ortofons famous Aucurum 6N gold-plated copper wire,the Cadenza Bronze is an analog lovers dream. It possesses superb resolution,able to illuminate the furthest reaches of the soundstage, and does so withstriking warmth and musicality. In a world of excellent phono cartridges,Cadenze Bronze shines as a superior design. If you want an Ortofon with a dash of warmth,the Bronze might be just the ticket. – The Absolute Sound, Editors Choice Award Now the music thundered out into the room, and Istopped wondering what the musicians were using in the studio and enjoyed themusic. Every LP I played sprang from my loudspeakers with a such a beautifullyhoned clarity and vivid dynamics that I spent evenings happily transfixed. – Hi-Fi WorldOutput: 0.4mVChannel balance: < 1 dBChannel separation: 24 dBFrequency range at - 3dB: 20Hz-55kHzTracking ability: 80 µmCompliance: 12 µm/mNStylus type: Nude Ortofon replicant, conical aluminumcantileverStylus tip radius: r/R 5/100 µmTracking force range: 2.2-2.7g, 2.5g recommendedTracking angle: 23°Internal impedance: 5 OhmRecommended load impedance: 50-200 OhmBody material: Stainless steel/aluminumBody color: Black with Bronze accentsCartridge weight 10.7gHi-Fi Heaven1549 Sixth StGreen Bay, WI 54304Contact us with your exact shipping address for accurate shipping cost.Larger speakers and items over 150lbs are strapped to a pallet and shipped via Freight including liftgate and residential delivery.We accept Pay-Pal or credit cards by contacting our store.We offer a 4% discount with payment by Zelle or check.Defective items are exchanged within 14 days from delivery.After 14 days, the manufacturers warranty will apply. Contact us for any assistance in obtaining warranty assistance.Defective item returns must be in the manufacturers original packaging, in like-new condition, including all packaging materials, shipped as-received and fully insured.Items are guaranteed to be as described.If a refund is desired, we will refund your full purchase price minus a 20% restocking fee.The item must be as received & unopened. Buyer pays return shipping costs.If you are having a problem, Please call before making a return claim on eBay.We do not offer free auditions or trials of merchandise.Returns will only be accepted for items that are truly defective.We use methods to detect product tampering.We will seek legal action against any individual or entity attempting to defraud us.Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304

One owner. Less than 50 hours. Purchased new December 2022 and has mostly sat idle since then. Original box, accessories and literature included. Accessories included are: 1 non-magnetic screwdriver, 4 color coded wires, 1 Ortofon stylus brush, and 3 sets of screws in original packaging. I don’t believe that this cartridge is even broken in yet. For more details and questions regarding the history of this item, please feel free to contact me. Current retail price is $2,689.00

ORTOFON Cadenza Bronze NEU und ungeöffnet / NEW and unopened VK 2799 Sie bieten auf ein neuen und ungeöffneten MC Tonabnehmer ORTOFON Cadenza Bronze New and unopened MC Cartridge MC-Tonabnehmerregulärer VK 2799 € Geeignet für mittelschwere Tonarme.Low Input Moving CoilOrtofon Replicant 100-SchliffKonischer Aluminium-NadelträgerWicklung aus vergoldetem, monokristallinem, sauerstofffreiem 6N-ReinkupferEdelstahl / Aluminium GehäuseMade in Denmark Testberichte “Es ist immer noch ein Ortofon, wie das selbst für diese Preisklasse extrem hohe Auflösungsvermögen, die recht gute Abtastfähigkeit und eine gewisse Präzision im Klang zeigen. Aber im Vergleich zu früheren Premium-MCs aus Dänemark klingt das Cadenza Bronze farbintensiver, wuchtiger, räumlich großzügiger und schlichtweg fesselnder. …” Daten Ausführung / Farbe: Bronze Ausgangsspannung: 0,4 mV Empf. Abschlusswiderstand: 50 - 200 Ohm Empf. Auflagekraft: 2,2 - 2,7 g Kanalabweichung: < 1 dB bei 1.000 Hz Nadelnachgiebigkeit: 12 µm/mN Nadelschliff: nackt, Ortofon Replicant 100 Nadelträger: Aluminium Prinzip: Moving Coil Serie: Ortofon Serie Cadenza Übersprechdämpfung: > 24 dB bei 1.000 Hz Übertragungsbereich: 20 - 55.000 Hz Artikelgewicht: 0,01 kg Höhe: 1,80 cmKeine Rückgabe möglich No return possible Technical Data Output voltage at 1000 Hz, 5cm/sec. - 0.4 mVChannel balance at 1 kHz - < 1 dBChannel separation at 1 kHz - > 24 dBChannel separation at 15 kHz - > 20 dBFrequency response 20 Hz - 20 kHz - +/-1.5Tracking ability at 315Hz at recommended tracking force *) - 80 µmCompliance, dynamic, lateral - 12 µm/mNStylus type - Nude Ortofon Replicant 100 on conical alu cantileverStylus tip radius - r/R 5/100 µmTracking force range - 2.2-2.7 g (22-27 mN)Tracking force, recommended - 2.5 g (25 mN)Tracking angle - 23°Internal impedance, DC resistance - 5 OhmRecommended load impedance - 50-200 OhmCartridge body material - Stainless steel / AluminiumCartridge colour - Bronze/BlackCartridge weight - 10.7 gramKeine Rückgabe möglich No return possible

ORTOFON Cadenza Bronze NEU und ungeöffnet / NEW and unopened VK 2799 Sie bieten auf ein neuen und ungeöffneten MC Tonabnehmer ORTOFON Cadenza Bronze New and unopened MC Cartridge MC-Tonabnehmerregulärer VK 2799 € Geeignet für mittelschwere Tonarme.Low Input Moving CoilOrtofon Replicant 100-SchliffKonischer Aluminium-NadelträgerWicklung aus vergoldetem, monokristallinem, sauerstofffreiem 6N-ReinkupferEdelstahl / Aluminium GehäuseMade in Denmark Testberichte “Es ist immer noch ein Ortofon, wie das selbst für diese Preisklasse extrem hohe Auflösungsvermögen, die recht gute Abtastfähigkeit und eine gewisse Präzision im Klang zeigen. Aber im Vergleich zu früheren Premium-MCs aus Dänemark klingt das Cadenza Bronze farbintensiver, wuchtiger, räumlich großzügiger und schlichtweg fesselnder. …” Daten Ausführung / Farbe: Bronze Ausgangsspannung: 0,4 mV Empf. Abschlusswiderstand: 50 - 200 Ohm Empf. Auflagekraft: 2,2 - 2,7 g Kanalabweichung: < 1 dB bei 1.000 Hz Nadelnachgiebigkeit: 12 µm/mN Nadelschliff: nackt, Ortofon Replicant 100 Nadelträger: Aluminium Prinzip: Moving Coil Serie: Ortofon Serie Cadenza Übersprechdämpfung: > 24 dB bei 1.000 Hz Übertragungsbereich: 20 - 55.000 Hz Artikelgewicht: 0,01 kg Höhe: 1,80 cmKeine Rückgabe möglich No return possible Technical Data Output voltage at 1000 Hz, 5cm/sec. - 0.4 mVChannel balance at 1 kHz - < 1 dBChannel separation at 1 kHz - > 24 dBChannel separation at 15 kHz - > 20 dBFrequency response 20 Hz - 20 kHz - +/-1.5Tracking ability at 315Hz at recommended tracking force *) - 80 µmCompliance, dynamic, lateral - 12 µm/mNStylus type - Nude Ortofon Replicant 100 on conical alu cantileverStylus tip radius - r/R 5/100 µmTracking force range - 2.2-2.7 g (22-27 mN)Tracking force, recommended - 2.5 g (25 mN)Tracking angle - 23°Internal impedance, DC resistance - 5 OhmRecommended load impedance - 50-200 OhmCartridge body material - Stainless steel / AluminiumCartridge colour - Bronze/BlackCartridge weight - 10.7 gramKeine Rückgabe möglich No return possible

Ortofon CADENZA Bronze MC Cartridge. Cartridge tested and sounds great. I estimate I have used the cartridge for about 15-20 hours. You will receive everything pictured. Sold as is. The Cartridge is delicate and can be easily damaged so there are no returns on this item. The Cadenza bronze retails for $2700 new. More about the cartridge: Ortofon Cadenza Bronze Moving Coil Cartridge: A little background info... Cadenza (from Italian: meaning cadence) refers to a portion of a concerto in which the orchestra stops playing, leaving the soloist to play alone in free time, without a strict, regular pulse. A cadenza can be written or improvised. It’s usually the most elaborate and virtuosic part that the solo instrument plays during the whole piece. At the end of the cadenza, the orchestra re-enters, and generally finishes off the movement. During the 19th century, composers began to write cadenzas out in full. Others wrote cadenzas for works, where the composer had intended for the solo to be improvised, in order for the soloist to have a well formed solo that they could practice in advance. Some of these have become so widely played and sung that they are effectively a part of the standard repertoire. The Ortofon Cadenza Bronze The Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. A Field Stabilizing Element, FSE, is used for optimal linearity especially during complex crescendo passages. Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics. Its stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions. Ortofon Cadenza Bronze Technical Data Output voltage at 1000 Hz, 5cm/sec. 400 ?V Channel balance at 1 kHz < 1 dB Channel separation at 1 kHz > 24 dB Channel separation at 15 kHz > 20 dB Frequency range at - 3dB 20 - 55 kHz Frequency response 20 Hz - 20 kHz +1,5 Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 12 µm/mN Stylus type Nude Ortofon replicant,, conical aluminium Stylus tip radius r/R 5/100 µm Tracking force range 2,2-2,7 g (22-27 mN) Tracking force, recommended 2,5 g (25 mN) Tracking angle 23° Internal impedance, DC resistance 5 Ohm Recommended load impedance 50-200 Ohm Cartridge body material Stainless steel / Aluminium Cartridge colour Bronze/Black

ortofon cadenza bronze cartridge. I purchased the cartridge new from Cloney audio in October 2019, which I still have the receipt for. The cartridge plays perfectly and I would estimate there is about 5 to 6 hundred hours on it, so still has plenty of life. Due to its delicate nature there is no return on this item, also the headshell is not included.

Advertised as spares/repair although this does work fine and passes test record testing, you could use as a trade in, replace the cantilever (some places do this - Groovetickler on insta is superb), send to ortofon for rebuild etc., Trade in value against and ortofon replacement up to £617 Diamond in excellent shape as shown in the photos and because of low use. Unfortunately at some point person unknown obviously damaged the cantilever. Although crimped and with a slight bend the diamond tracks back to centre which is why it plays fine. This is a superb cartridge with excellent sound - regret having to sell this but finance pressures dictate having to sell some of my kit off. MC Cadenza Bronze Technical dataOutput voltage at 1000 Hz, 5cm/sec. - 0.4 mV Channel balance at 1 kHz - < 1 dB Channel separation at 1 kHz - > 24 dB Channel separation at 15 kHz - > 20 dB Frequency response 20 Hz - 20 kHz - +/-1.5 Tracking ability at 315Hz at recommended tracking force *) - 80 µm Compliance, dynamic, lateral - 12 µm/mN Stylus type - Nude Ortofon Replicant 100 on conical alu cantilever Stylus tip radius - r/R 5/100 µm Tracking force range - 2.2-2.7 g (22-27 mN) Tracking force, recommended - 2.5 g (25 mN) *) Typical valueTracking angle - 23° Internal impedance, DC resistance - 5 Ohm Recommended load impedance - 50-200 Ohm Cartridge body material - Stainless steel / Aluminium Cartridge colour - Bronze/Black Cartridge weight - 10.7 gramAny questions please ask Will be sent Special Delivery for insurance purposes - The auction is due to end Wednesday and will post next day after payment - If you do not pay by Friday 16th June I will be unable to post until the 24th June.

HIFI - Platine exceptionnelle - Marque MOFI UltraDeck - ORTOFON Cadenza Bronze. En parfait Etat - Juillet 2019 - Quasi neuve. rodée. A prendre sur place (trop lourde pour transport). Renseignement sans problème. nhésitez pas, cest une superbe affaire a ce prix (neuf environ 4.800 euros)