ortofon AS-309S Static Balance Type 12? Long Tonearm Pickup Arm w/ Tone Arm Base Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. There is dullness and dirt on the top of the tone arm post.The appearance has small scratches, dullness, dirt, etc. due to normal use. In addition to the AS-309S original accessories shown in the photo, an optional weight Type D and a custom-made stainless steel arm base are included separately. Can be used as an external tone arm with the separately included stainless steel tone arm base. (A separate pedestal may be required for height adjustment to the turntable.)See the 9th photo for an example of use. Specifications Effective mass (without headshell) - 4.0 gEffective length (distance between the stylus and pivot point) - 329mmMounting distance between the pivot point and turntable center - 314mmOffset angle - 19 degreesOverhang - 15mmTracking force adjusting range ( direct reading) - 0 to 3gHeight adjustment range - 35mm to 55mmDiameter of the armbase mounting hole - 19mm to 20mmDiameter of center shaft - 18mm Optional weight Type D Weight: 249g?Compatible weight: 26-38g (including shell) Custom-made stainless steel arm base Dimensions Outer diameter 79 mm, H 80 mm, hole diameter 20 mm, screw spacing 33 mm.The cable opening is W16mm, H9mm. Weight: approx. 3.5 kg Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Description A slide base that can be used with the ortofon G shell arm and SPU-A. Manufacturer: ortofon Model number: SB-II Hole diameter: approx. 20mm Includings are all shown in the photos. Please check the photos carefully. Please contact us if you have any questions. Thank you for visiting. Shipping I send a product by FEDEX or EMS. I attach the tracking number. Please bid it without worrying ? Can not be bundled. Returns Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 14 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 14 days of the receipt of the item. Please contact me first for return before you ship it back to me. The postage of the returned goods is a buyer burden. International Buyers Please Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ortofon RMG309 LIMITED Long Tonearm Phono Cable / Original Box Included ortofon SPU Long arm for G shell RMG-309 LIMITEDA limited type that enables precise settings with an adjustable arm base/lifter on the front and rear. The glossy tone unique to ortofon, combined with the G shell, produces a wonderful sound. ?ConditionEach part has been polished/cleaned.Overall, there is no noticeable damage and it is glossy/shiny and beautiful. There is no major damage to the cables or other accessories. It is in absolutely beautiful condition. Considering its age, we consider it to be in good condition. ?OperationWe have confirmed the operation using our equipment.?There is no problem with the operation, such as the output from both channels, each adjustment point, operation feel, and height adjustment. ?Product ContentsManufacturer: ortofonModel Number: RMG-309 LIMITEDTotal Length: 406mmExecution Length: 320mm ?Accessories?Arm base?base fixing screws x 4?PHONO cable?hex wrench for weight?instruction manual (original)?overhang gauge?mounting template (Original)?Original box (with internal cushioning material) ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SME Ortofon Tone Arm Compatible Sliding Arm Base Slide Base Mounting 20mm Description Condition: Used Unused SME Ortofon Tone Arm Compatible Sliding Arm Base Ortofon Slide Base Mounting Diameter 20mm Silver Unused SME type sliding arm base Sliding base. Compatible with SME, so you can remove the SME arm and mount Ortofon, Micro Seiki, EMT, Torrens and other arms with shaft diameters of 20 mm or less without removing the SME arm. The shaft diameter may vary depending on the arm model even if it is from the same manufacturer, so please measure before purchase. Since the base part can be slid, there is no need to worry about overhangs and the A and G types of Ortofon SPU can be used as they are. Compared to the adaptor for A-shells, the SPU A and G types can be used as they are without the need to change the adaptor or arm, which is very convenient. Various types of tone arms with arm bearing diameters of 20 mm or less can be fitted. As shown in photo 2, the knurled screws for movable fixing can be swapped between the left and right sides for convenience, or both sides can be fixed with 3 mm screws on the opposite side for better fixing of the arm. (Screws are not included in the kit, so you will need to provide your own). Four stainless steel hexagonal screws for mounting and two hexagonal spanners for fixing the arm and base are also included. Stainless steel screws are also included for additional fixing of the slide and arm mounting part shown in photos 3 and 4. Accessories Hexagonal spanner x 2 Stainless steel hexagonal screws x4 Stainless steel potato screw x 1 Mounting diameter: approx. 20 mm max. Size: approx. D84mm x W66mm including screw ( Body 52mm)xH19mm Payment Please pay within 5 days after the auction closed. Shipping Only residents of the purchasing area are eligible to make purchases. If you really want the product and are not a resident, please contact us separately for assistanceTo save on shipping costs, foldable clothes and bags may be shipped folded. Please understand this. Returns Returns are free of charge, and refunds will be processed through eBay. However, please note that returns due to size or specification differences on the buyers end will not be accepted under any circumstances. Each brand has its own size and specification characteristics. For example, EU sizes or measurements in centimeters may vary slightly depending on the brand. International Buyers - Please Note: Import duties, taxes, and additional charges are not covered within the listed item price or shipping fees. These expenses fall under the responsibility of the purchaser.Before engaging in any bidding or purchasing activity, its advisable to consult with your countrys customs office to ascertain the potential costs involved.Typically, these additional charges are collected by the shipping company upon delivery or during item retrieval. Its crucial to distinguish these charges from supplementary shipping fees to avoid confusion.Adherence to governmental regulations prohibits the undervaluation of merchandise or mislabeling items as gifts. All products and shipments originate from Japan. In cases where specific details are not provided, the standard voltage for electrical appliances is typically AC100V. For instance, consider the voltage disparity between Japan and the United States, where the standard voltage diverges to AC200V. This discrepancy underscores the necessity of employing a voltage transformer to mitigate the risk of electrical malfunctions. Therefore, ensuring compatibility with electrical specifications is imperative for seamless functionality and longevity of your appliances.

ORTOFON SB-II SLIDE BASE TURNTABLE PARTS HOLE DIAMETER: APPROX. 20MM BLACK Description ?? Condition: Used Please confirm the condition by reviewing the images carefully. ?? ORTOFON SB-II SLIDE BASE A SLIDE BASE THAT ALLOWS THE USE OF SPU-A WITH ORTOFON G-SHELL ARMS. ? CONDITION SOME MINOR SCRATCHES ARE VISIBLE, BUT THERE IS NO SIGNIFICANT DAMAGE, AND THE ITEM STILL HAS A GLOSSY FINISH. PLEASE NOTE THAT THIS IS A USED ITEM THAT HAS AGED OVER THE YEARS. PLEASE BID WITH THE UNDERSTANDING THAT THERE MAY BE MINOR SCRATCHES, TARNISH, AND SIGNS OF USE DUE TO AGE AND USAGE. THE CONDITION ASSESSMENT IN THE CHECK SECTION IS BASED ON THE STANDARDS OF OUR COMPANY, WHICH SPECIALIZES IN VINTAGE AUDIO EQUIPMENT. THERE MAY BE A DIFFERENCE BETWEEN OUR ASSESSMENT AND YOUR EXPECTATIONS, SO PLEASE EXAMINE THE IMAGES CAREFULLY AND MAKE YOUR OWN JUDGMENT. WE ARE HAPPY TO ANSWER ANY QUESTIONS YOU MAY HAVE ABOUT THE CONDITION, SO PLEASE FEEL FREE TO CONTACT US. THIS ITEM IS A PART, SO NO RETURN GUARANTEE IS OFFERED. PLEASE CONSIDER THIS BEFORE BIDDING. ? PRODUCT DETAILS MANUFACTURER: ORTOFON MODEL NUMBER: SB-II HOLE DIAMETER: APPROX. 20MM ? INCLUDED ACCESSORIES PLEASE NOTE THAT EVERYTHING SHOWN IN THE PHOTOS IS INCLUDED. ?? Please feel free to ask any questions. We will respond within 48 hours. The product description may use automatic translation by AI. There may be some minor translation errors or unnatural parts. If any questions arise due to this, please be sure to ask before making a purchase. We will make every effort to address any questions before the purchase. Shipping ?? Items would generally be dispatched within 6 working days. ?? Most items will be shipped using FeDex, DHL or UPS which is reliable and arrives quickly. ?? Please note that for special items, or depending on the destination country, different shipping methods may be used. ?? Depending on the country, certain items such as watches and sunglasses may experience delays during customs clearance. Please be aware of this in advance. ?? As liquids are difficult to export, ink will not be included with pens, etc. Even if there are ink bottles in the images, the contents will be removed before shipping. International Buyers - Please Note: ?? Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. ?? Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. ?? These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?? The customs declaration amount will be based on the selling price on eBay. It is illegal to underdeclare the declared amount, a practice commonly referred to as undervaluing, so it must not be done under any circumstances. Similarly, declaring items as gifts is also not permitted.

Ortofon RMG 212 Tonearm w/ Armrest Base PHONO Cable Excellent Tested from Japan DescriptionCondition: Each part has been polished/cleaned. The arm has some scratches on the pipe and dullness on the lower pole. There are no other noticeable damages and it is in a shiny/glossy condition. There are markings on the cable terminals but there is no significant damage to the included items. ?Operation We have tested the operation with our equipment. - Output from both channels - Tracking force adjustment - Various adjustment points, operation feel - Height adjustment, etc. There are no issues with the operation. Accessories: - Armrest (Mounting Nut/Washer) - Arm Base - 3 Fixing Screws - PHONO Cable - Instruction Manual (Copy, for RMG-212i as a bonus) - Mounting Template (Copy) The G-shell shown in the photos is for illustration purposes only and is not included. Product Details: Brand: Ortofon Model: RMG212 Total Length: approximately 247mm Effective Length: 228mm Overhang: 16mm If you purchase other products together, we might be able to do a discount. So, please message us if you are interested! ShippingShipping method: Economy International Shipping : -11- 23 days -with tracking number -Free Shipping Expedited International Shipping: with tracking number -1-4 days -with tracking number -Additional Cost of Shipping Shipping cost is already included in the price. (Additional price might cost for shipping to Australia.)International Buyers - Please Note:- Returns - Returns are accepted within 30 days of receiving the item. *However, return leg is the responsibility of the customer. Return Policy and 100% Guarantee Any item that is defective beyond the description given on our site will be refunded. If the item delivered is defective, please contact us via email. However, you must return the item to us. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customsoffice to determine what these additional costs will beprior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts US and International government regulations prohibit such behavior. If you have any inquery please do not hesitate to ask!

For sell Base / holder for old Ortofon tonearms 229,297,212,309 .... Made of aluminum.

????Including & Condition Details: As shown in photos. ortofon RMG309 LIMITED Long Tonearm Phono Cable / Original Box Included ortofon SPU Long arm for G shell RMG-309 LIMITEDA limited type that enables precise settings with an adjustable arm base/lifter on the front and rear. The glossy tone unique to ortofon, combined with the G shell, produces a wonderful sound. ?ConditionEach part has been polished/cleaned.Overall, there is no noticeable damage and it is glossy/shiny and beautiful. There is no major damage to the cables or other accessories. It is in absolutely beautiful condition. Considering its age, we consider it to be in good condition. ?OperationWe have confirmed the operation using our equipment.?There is no problem with the operation, such as the output from both channels, each adjustment point, operation feel, and height adjustment. ?Product ContentsManufacturer: ortofonModel Number: RMG-309 LIMITEDTotal Length: 406mmExecution Length: 320mm ?Accessories?Arm base?base fixing screws x 4?PHONO cable?hex wrench for weight?instruction manual (original)?overhang gauge?mounting template (Original)?Original box (with internal cushioning material) ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

ortofon RMG 212 Tonearm w/ Armrest Arm Base Cable PHONO Excellent Tested Japan Description Condition: Used ortofon RMG 212 Tonearm with Armrest/Arm base/cable…etcDynamic balance type tonearm RMG 212 compatible with G shell. This model is recommended for those who use SPU series cartridges. This tonearm allows you to fully enjoy the charm of ortofon.?ConditionEach part has been polished/cleaned.There are a few small scratches. There is no other noticeable damage and it is in a shiny condition. The weight and cable are also in good condition.?OperationWe have confirmed the operation with our equipment.- There are no problems with the output from both channels, needle pressure adjustment, each adjustment point, operation feel, height adjustment.. etc.?Product DetailsManufacturer: OrtofonModel Number: RMG 212Total Length: Approximately 247 mmRunning length: 228 mmOverhang: 16 mm?Accessories?Armrest (mounting nut/washer)?Arm base?3 fixing screws?PHONO cable?Instruction manual (copy *For RMG-212i, but as a bonus)?Mounting template (copy)?The G shell in the photo is for illustration purposes only and is not included. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Item TitleOrtofon Rmg-309 Rf-297 Micro Machinery Ma-505 Tone Arm Slide Base Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

For sell Base / holder for old Ortofon tonearms 229,297,212,309 .... Made of aluminum.

SME Ortofon tonearm compatible sliding arm base Ortofon sliding base 20mm Description Condition: Used Unused SME type sliding arm base Slide base. It is compatible with SME, so you can remove the SME arm and install Ortofon, Micro Seiki, EMT, Torrens, etc. arms with shaft diameters of 20mm or less without removing the SME arm. The shaft diameter may vary depending on the arm model even if it is made by the same manufacturer, so please measure the shaft diameter in advance before purchasing. Since the base can slide, there is no need to worry about overhangs, and the A and G types of Ortofon SPUs can be used without modification. The base is also compatible with Ortofons slide base, so SPU A and G types can be used as they are without the need to change the adapter or arm. Compared to an adapter, the contact points are reduced, which is also advantageous in terms of sound quality. Various types of tone arms with a bearing diameter of 20 mm or less can be mounted. As shown in Photos 4 and 5, the knurled screws for movable fixation can be swapped between the left and right sides for convenience, or both sides can be fixed with 3mm screws on the opposite side to fix the arm more securely. (Screws for fixing are not included in the kit, so please prepare them yourself if necessary.) Four hex screws for mounting and an Allen wrench for fixing the arm are also included. Mounting diameter: approx. 20mm or less Size: approx. Approx. D84mm x W66mm including threaded part (body 52mm)xH19mm Payment Please pay within 5 days after the auction closed. Shipping Only residents of the purchasing area are eligible to make purchases. If you really want the product and are not a resident, please contact us separately for assistance Returns Returns are free of charge, and refunds will be processed through eBay. However, please note that returns due to size or specification differences on the buyers end will not be accepted under any circumstances. Each brand has its own size and specification characteristics. For example, EU sizes or measurements in centimeters may vary slightly depending on the brand. International Buyers - Please Note: Import duties, taxes, and additional charges are not covered within the listed item price or shipping fees. These expenses fall under the responsibility of the purchaser.Before engaging in any bidding or purchasing activity, its advisable to consult with your countrys customs office to ascertain the potential costs involved.Typically, these additional charges are collected by the shipping company upon delivery or during item retrieval. Its crucial to distinguish these charges from supplementary shipping fees to avoid confusion.Adherence to governmental regulations prohibits the undervaluation of merchandise or mislabeling items as gifts. All products and shipments originate from Japan. In cases where specific details are not provided, the standard voltage for electrical appliances is typically AC100V. For instance, consider the voltage disparity between Japan and the United States, where the standard voltage diverges to AC200V. This discrepancy underscores the necessity of employing a voltage transformer to mitigate the risk of electrical malfunctions. Therefore, ensuring compatibility with electrical specifications is imperative for seamless functionality and longevity of your appliances.

ortofon AG-II Slide Base for SPU-G & SPU-A Turntable Tonearm Parts from Japan Description Condition: Used ? ConditionShiny/glossy, no noticeable flaws.This is a used item that has been used for a number of years.Please understand that there are scratches, dullness, and signs of use that accompany aging/use.Please check the pictures carefully and make your own judgment. Item ContentsManufacturer?ortofonModel?AG-IIHole diameter?Approx. 20mmSlide base for ortofon G shell arm with SPU-A. AccessoriesThe items in the photo are all included. Please check them. Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Item TitleOrtofon Rmg Rma Rf Arm Base Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

????Including & Condition Details: As shown in photos. ortofon RS-212 Tonearm Armrest/PHONO cable included Dynamic balance type tonearm was released in 1967. It is a short arm that gives you a proper and solid tone. ?ConditionEach part has been polished/cleaned. There are no major scratches and it is glossy/shiny. There is no noticeable damage to cables or other accessories. ?OperationThe operation has been confirmed using our equipment.?There are no problems with the operation, such as the output from both channels, the lifters descending speed, each adjustment point, operation feel, and height adjustment. ?Product ContentsManufacturer: ortofonModel number: RS-212 ?Accessories?Armrest?PHONO cable?Arm base?Base fixing screw × 3?books?instruction manual (copy/English version, special version, but as a bonus)?Template (copy) ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

????Including & Condition Details: As shown in photos. ortofon SB-II Slide Base A slide base that can be used in conjunction with the SPU-A arm for Ortofon G shell. ?Product contents Manufacturer: ortofon Model number: SB-II Hole diameter: Approx. 20mm ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Genuine Ortofon Parts Tone Arn Base for RMG-212 Weight 39gDescriptionAbout This Items It is a used and made in Denmark.Center hole diameter for Arm Base mounting 20mm.Height approx 16mm.The available tonearm mount for this product is 20mm.This arm base is an original parts.AppearanceThis item has a little scratches.ConditionUsed item.Included Item No screw.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal. SHIPPING COST?SHIPPING COST USA ASIA SHIP ORDER VIA DHL or JAPAN POST( WITH TRACKING NUMBER ) ? AUSTRARIA SHIP ORDER VIA JAPAN POST (WITH TRACKING NUMBER ) EUROPE SHIP ORDER VIA DHL or JAPAN POST( WITH TRACKING NUMBER ) ASIA USA$15 ( DHL or JAPAN POST) $5.99 each for an additional LP,CANADA AUSTRARIA$11 (JAPAN POST) $6.99 each for an additional LP,EUROPE$15 (DHL or JAPAN POST)About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

I was told this was tuned up by Aural Hifi last year - and as Ive checked it out, everything works perfectly on it! Youll need to adjust it for your table/cart of course. Im including the 2M Ortofon Red cart for fast access but assume youll likely pick something to your liking. Im also including the baseplate for a TD-125 if you want. If youre setting this up for a different table, let me know and Ill hold on to it.Table for display purposes and is not included.Ive made a video showing it functioning so you can see it all is in order. https://youtu.be/_5CZJoO9CgEInsured shipping to the continental United States is a flat $25. If youre international, lets chat and I can work out a shipping quote.

Original Ortofon RMG, RF, RMA tonearm armbase. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Ortofon AG-ll sliding adjustable base for Ortofon or Bokrand tonearm.Installed and used once with Bokrand as-309 arm I have listed in another auction.I used this to adjust cartridge alignments when using SPU carts and it worked great only selling as I am also selling the arm I used with it.These are very rare in the USA market.I ONLY ACCEPT BIDS AND SHIP TO LOWER 48 USA.

OPPD-AB5 für Ortofonn Original Luxman Mounting Base

For sell Base / holder for old Ortofon tonearms 229,297,212,309 .... Made of aluminum.

OPPD-AB5 für Ortofonn Original Luxman Mounting Base