Description
VIDEO DEMO: https://youtu.be/7bm_1G6Grws Dust cover - finished polishing! For sale 1 rare piece of fully automatic turntable from Victor/JVC form the golden era in excellent condition, with the rare original box available.The turntable has the straight arm only, i have an optional S-arm for sale, those interested just write me and ill make you a personalized bundle price. It will include a Victor Z1-EB original cartridge in very good condition and a high quality japanese voltage converter from 220/240V to 100V as it is a JP domestic market product. See video with this cartridge mounted and aligned.The dust cover has been polished by a professional and it looks really well, with only few usage signs on it (see photos) It will be carefully packed in a 2 box enclosure: a largest box with adecquate protection, inside which there will be the original box with the platter and the counterweight packed at the bottom of the box, The original box misses some of the styrene laterals, so i will use some thick airbubble foil to ensure the same protection level, so dont worry about that.It will be sent by DPD Courier to all EU countries where this courier is available or has delivery partners. https://audio-database.com/VICTOR/player/ql-y66f.html This is a full-auto player that pursues sound quality equivalent to that of manual machines.For the turntable, diameter 35 cm, weight 2.9 kg (including mat), inertial mass 560kg-cm2As a result, the inertia mass is increased by more than 30% compared to a 30 cm diameter turntable with the same weight and shape, and basic rotational performance is improved.A magnetic support DD motor is used to reduce the bearing load and friction caused by the heavy turntable, as well as the downward force caused by the rotor magnet.In the magnetic support system, the rotor is located below the rotor yoke and the suction force is applied upward. As a result, the bearing load is reduced to about 1/10 of that of the conventional system, to only about 500g, thus reducing noise and wear caused by bearing friction.An ED (electro dynamic) servo arm is used for the tone arm.The ED servo tone arm is an electronic Q damping arm that detects vibration of the arm by two pairs of coreless linear motors directly connected to horizontal and vertical bearings, and cancels the vibration by generating inverse torque by feedback control of a microcomputer. This suppresses needle skipping and intermodulation distortion induced by low frequency resonance. In addition, full automatic operation is possible without touching the arm body by volume and button operation.In addition, manual operation is also supported and the arm can be moved by hand.An up pipe replacement system is adopted, and straight and S-shaped arm pipes can be replaced freely.The height of the arm can be adjusted. In addition, since the dynamic balance system is adopted, the movement of the arm is not affected even if the player leans.The cabinet uses a rose-like all-wood cabinet with mirror finish.The servo circuit uses a double-servo quartz circuit with 30 times higher quartz lock stability than conventional ones.Equipped with a turntable independent start / stop switch that can be used for manual operation, etc.TypeRecord playerMotorFG Detection Coreless DC ServoWow flutter0.005% (RMS, Rotating Part FG Method)Signal-to-noise ratio80dB(DIN-B)Tone armED servo, pipe exchange systemWeight of mounted cartridge4.5 ~ 21g (Including Shell)Up to 35g (using SW-Y66F, including shell)Needle pressure adjustment range0 ~ 3gExternal dimensionsWidth 495x Height 187x Depth 405 mmWeight12.3kg
Live search