Naim Audio SUPERNAIT 3 Vollverstärker Erst 3,5 Jahre JungMit der Original Rechnung von Projekt Akustik von 02/2021.Technisch 1A, spielt einwandfrei. Tier und Nichtraucher freier Haushalt.Mit allem Original Zubehör:Fernbedienung, Anleitung, Rechnung und Karton. Die Neuheiten im Detail: Die Entwickler konnten die Geschwindigkeit der Spannungsverstärker mehr als verdoppeln. Damit steigt auch die Reaktionsgeschwindigkeit der Endstufe entsprechend. Die zweite Verstärkerstufe kommt jetzt ohne Kaskodenschaltung aus. Damit muss die Stufe weniger bedämpft werden, reagiert wesentlich schneller und liefert einen deutlich höhere Dynamik. Kopfhörer Verstärker Der dreistufige Phono-Vorverstärker besteht aus einem Eingangsverstärker, einem passiven Korrekturnetzwerk und einem Ausgangsverstärker mit aktiver Entzerrung. Diese Schaltungstechnik besitzt ein exzellentes Rauschverhalten, korrigiert nach RIAA bis weit über den hörbaren Bereich hinaus und hat großzügige Übersteuerungsreserven.Alle Widerstände und Kondensatoren des RIAA-Korrekturnetzwerks sind Durchsteckbauteile in Folientechnik, die eine äußerst geringe Mikrofonie und ein ausgezeichnetes Impulsverhalten besitzen. Obwohl der Phonoeingang prinzipbedingt rund 1000-mal empfindlicher ist als ein normaler Analogeingang, wird so eine exzellente Klangqualität erreicht.Die Eingangsimpedanz von 47k? parallel mit 100pF ist perfekt an Moving-Magnet (MM) Tonabnehmer angepasst. Technische DatenModellNaim SuperNAIT 3Ausgangsleistung80 W + 80 W an 8 ? 135 W + 135 W an 4 ?Kopfhörer6,3-mm-Buchse16 ? bis 1 k? AnschlussimpedanzEingänge5 + mm phono(Line-Eingang analog)Gleichspannungsausgang+24 V (Buchse aux 2) für Naim-Phono-VorstufeLine-Ausgänge fixav out und stream outLine-Ausgänge variabelsub out, bi-amp out und pre-amp outLeistungsaufnahme Ruhezustand37 VANetzversorgung100 V, 115 V oder 230 V; 50/60 HzAbmessungen (H x B x T)87 x 432 x 314 mmGewicht13,9 kg _gsrx_vers_1680 (GS 9.8.3 (1680))

AVONDALE AUDIO NCC200 POWER AMPLIFIER MODULE PAIR TESTED 100% OPERATIONAL CONDITION SUPER CLEAN SET This listing is for a used pair of Avondale Audio NCC200 power amplifier boards. These are in super clean fantastic condition, no burned or cracked components. I feel they do not have a lot of time of them. I tested these in a Naim 110 amplifier with extraordinary results. Both channels were clean and clear with no hum, buzz, noise or distortion, sound quality was exceptional. I set bias to prescribed 36mA and ran the amplifier 24/7 a for 7 day time period. SOME ADDITIONAL INFO: audio_maven has been dedicated to testing and accurately describing what our buyers will receive. We have sold over 4000 pieces of audio gear online since the year 2001. Although eBay does not display or accredit sellers who have continuous 100% positive feedback with no negatives or neutrals for lifetime this is what we have achieved so far in 22 years. We have worked hard to provide our buyers with quality gear. A WORD ON SHIPPING, INSURANCE, AND PACKING CHARGES: Shipping cost includes FedEx Ground/Home service full insurance and new heavy-duty packing materials. I take packaging very seriously and go to extremes to help ensure that your item arrives safely. Please see my eBay feedback profile for references and rest assured this will be done correctly. Shipping will be to the contiguous 48 States only. PLEASE NOTE VERY IMPORTANT PAYMENT TERMS: Shipping ONLY to your confirmed/verified USA address associated with the payment. eBay implemented sales tax may apply. Your bidding/buying constitutes acceptance.

Hallo, Ihr bietet auf ein Verstärkerupgrade Qudos LW19 NCC220 aus dem Hause Avondale Audio für Naim Verstärker NAP,näheres unter www.avondaleaudio.comWenig Betriebsstunden und voll funktionsfähigEine klare Klangverbesserung auf Grund moderner Schaltungstechnik gegenüber der schon legendären NAP Serie! Wie immer von Privat: Keine Gewährleistung oder Rücknahme!Viel Spaß beim Bieten zum Weihnachtsschnäppchen....

AUDIOPHILE CABLE, VERY TRASPARENT, USED TO CONNECT A REGA RP6 TURNTABLE TO NAIM XS 2 TO NAIM FLATCAP XS

AVONDALE AUDIO NCC200 or NAIM NAP250 NAP135 POWER AMPLIFIER COPPER HEATSINKS, RARE New unused copper heatsinks for Avondale Audio NCC-200 or NAIM NAP-250 Amplifiers. These heatsinks replace the black aluminium heatsinks often used with these modules, because copper provides better heatsinking and so offers greater high power use. They make your amplifier transistors run cooler too, prolonging their life. They can be used with Naim NAP-250 and NAP-135 amplifier and regulator modules, or Avondale Audio NCC-200 modules. This auction is for One Pair of copper heatsinks - i.e. 2 heatsinks for the amplifier modules or regulator modules of a Naim NAP-250 or NAP-135 amplifier. These brand new heatsinks are a rarely available low-cost upgrade to your Naim power amplifier. Delivery to UK addresses only. Collection is welcome from Ealing, West London - please pay cash if collecting, not PayPal or cheque.

AVONDALE AUDIO 3APS POWER SUPPLY for Naim NAC62. Acquired from an elderly enthusiast who was clearing out the huge collection of equipment that he had built up over a lifetime. PLEASE SEE MY OTHER LISTINGS FOR MATCHING NAIM NAC62 PREAMPLIFIER. Cosmetically as per pictures. IN FULL WORKING ORDER. Most likely works with other Naim Pres but Im not a Naim expert so please determine that for yourself BEFORE bidding,. Please dont buy it and then ask to return it because it wont work with my Naim xyz***. Power supply / connection lead to Naim NAC62 Preamp is included as shown. Matching NAIM NAC62 PREAMPLIFIER is on a separate auction finishing about 15 minutes before this one.

NAIM NAC62 PREAMPLIFIER WITH AVONDALE AUDIO UPGRADES AND FITTED WITH MA323/5 BOARDS Acquired from an elderly enthusiast who was clearing out the huge collection of equipment that he had built up over a lifetime. PLEASE SEE MY OTHER LISTINGS FOR MATCHING AVONDALE AUDIO 3APS POWER SUPPLY. Cosmetically as per pictures. IN FULL WORKING ORDER. Regarding Phono boards: Im not a Naim expert and so dont know the exact gain and loading of the boards. All I know is they are marked MA323/5 and I have included several pictures. No connection leads included. Power supply lead is included with Avondale Audio 3APS Power Supply which is on a seperate auction finishing 10 minutes after this one. On 26-May-23 at 12:41:03 BST, seller added the following information: IVE BEEN INFORMED BY SOMEONE MORE EXPERT ON NAIMS THAN I, THAT THE PHONO BOARDS FITTED ARE THE UPDATED VERSION OF THE MOVING COIL BOARDS; THE 323 DESIGNATING MOVING COIL AND THE 5 SUFFIX THE UPDATED VERSION.

AVONDALE AUDIO NCC200 or NAIM NAP250 NAP135 POWER AMPLIFIER COPPER HEATSINKS, RARE New unused copper heatsinks for Avondale Audio NCC-200 or NAIM NAP-250 Amplifiers. These heatsinks replace the black aluminium heatsinks often used with these modules, because copper provides better heatsinking and so offers greater high power use. They make your amplifier transistors run cooler too, prolonging their life. They can be used with Naim NAP-250 and NAP-135 amplifier and regulator modules, or Avondale Audio NCC-200 modules. This auction is for One Pair of copper heatsinks - i.e. 2 heatsinks for the amplifier modules or regulator modules of a Naim NAP-250 or NAP-135 amplifier. These brand new heatsinks are a rarely available low-cost upgrade to your Naim power amplifier. Delivery to UK addresses only. Collection is welcome from Ealing, West London - please pay cash if collecting, not PayPal or cheque.