Hi! I have been selling on eBay for over 20 years and I’m proud to have a 100%, 5-star rating from over 500 sales. If you read my eBay feedback as a seller, you will see that my customers are always happy with what they receive from my sales and auctions. I always describe the items I offer as honestly and accurately as possible with plenty of clear and detailed photographs. In addition, I am very meticulous about packaging items for shipping. I use either genuine original packaging or quality sturdy packaging to ensure the item arrives in the condition it left me. I am happy to ship to Canada and the entire USA while some select items are also offered to the UK. Product Description: Mober solid lathed aluminum one-piece sub-chassis made for Naim Aro arm for Linn Sondek LP12. Quality aluminum piece that is a highly respected improvement over the standard LP12 original piece. Once piece arm board and sub-chassis is machined to 0.05 mm error in flatness between tonearm and platter. I can confirm this will work with Pre-Cirkus, Cirkus, and Karousel bearings Does not include mounting hardware nor Karousel bearing pictured. Please study the pictures carefully as they form part of the description. If you have any questions or want more pictures, please do not hesitate to get in touch. This is a private auction or sale - all the information has been provided to the best of my knowledge. Other than the assurance that you will receive exactly what is pictured, there is no guarantee regarding performance and absolutely no warranty is expressed or implied. Returns are not accepted. THE FINE PRINT - PLEASE READ Please contact me before Bidding or Buying if you have Zero, Very Low, or Excessively Negative Feedback otherwise I reserve the right to cancel the sale and refund your money. Warranty and technical support are available online or from the respective company - I do not provide technical support, but I am willing to answer questions to try to help you out. Refunds will ONLY be issued if item does not arrive or is not as described as required by eBay policy - make sure this item is what you want/need/can use as the sale will not be cancelled and a refund will not be issued if you buy the wrong thing or change your mind - please ask before bidding or buying. All items are described as honestly and as accurately as possible. Please inspect the photos carefully as you will receive exactly what is photographed. Damage can occur during shipping so you need to take that up with the shipper and not request a refund or leave negative feedback. Please contact me so I can try to help. I will only ever ship to the address eBay has on file for you or else the system thinks the item was never delivered. eBay automatically calculates shipping and is pretty accurate, but any underages or overages are not charged or refunded respectively. eBay automatically collects tax for items being shipped to some locations - I don’t control this nor can I prevent it. In Canada, GST is automatically charged on all eBay purchases since 2022, even though I am not running a business and the item you are buying may be pre-owned. Thank our stupendous federal government. Shipping is always more expensive than people realize - please don’t expect or ask for free shipping. Please ask questions before buying or bidding. Thanks

A Rare Find! One Owner Naim Audio ARO Tonearm and Naim Prefix This comes as a trade-in on a new LP playback system. This is a one-owner Naim ARO tonearm in great shape but has some scratch marks on the mounting base and a Naim Prefix K (for MC) with ARO connector. The Prefix doesnt care what voltage you use, so this is usable worldwide. Buy with confidence from one of the USAs longest existing, most knowledgeable audio dealers: Gene Rubin Audio Established way back in 1979! Go ahead and google Gene Rubin Audio, read the forums, read the reviews, read my ebay feedback, you are dealing with the best customer service in the audio businessFranchised dealer for: LFD, Rega, Heed, Palmer, Pure Fidelity, Sutherland, Graham Speakers, Fyne Audio, Belles, Exposure, Aurender, Hana, Koetsu, Ortofon, Croft, Harbeth, Spendor, Clearaudio, Dynavector, Quadraspire, Chord Company, Audience, Audio Desk Systeme, Creek, Milty, KAB, Q-UP, Furutech, Musical Surroundings, and more.

A Rare Find! One Owner Naim Audio ARO Tonearm and Naim Prefix This comes as a trade-in on a new LP playback system. This is a one-owner Naim ARO tonearm in great shape but has some scratch marks on the mounting base and a Naim Prefix K (for MC) with ARO connector. The Prefix doesnt care what voltage you use, so this is usable worldwide. Buy with confidence from one of the USAs longest existing, most knowledgeable audio dealers: Gene Rubin Audio Established way back in 1979! Go ahead and google Gene Rubin Audio, read the forums, read the reviews, read my ebay feedback, you are dealing with the best customer service in the audio businessFranchised dealer for: LFD, Rega, Heed, Palmer, Pure Fidelity, Sutherland, Graham Speakers, Fyne Audio, Belles, Exposure, Aurender, Hana, Koetsu, Ortofon, Croft, Harbeth, Spendor, Clearaudio, Dynavector, Quadraspire, Chord Company, Audience, Audio Desk Systeme, Creek, Milty, KAB, Q-UP, Furutech, Musical Surroundings, and more.

A Rare Find! One Owner Naim Audio ARO Tonearm, Naim Hi Cap, and Naim Prefix This comes as a trade-in on a new LP playback system. This is a one-owner Naim ARO tonearm in great shape but has some scratch marks on the mounting base. Also included is an Olive Naim Hi Cap, and a Naim Prefix K (for MC) with ARO connector. Also included is a quality 4 pin DIN to RCA interconnect to connect from the Hi Cap to any preamp/amp with RCA inputs. Hi Cap is 120 volts but can be changed to 240v. The Prefix doesnt care what voltage you use. This had been all mounted on a Pink Triangle Anniversary of which I have also listed on ebay. Buy with confidence from one of the USAs longest existing, most knowledgeable audio dealers: Gene Rubin Audio Established way back in 1979! Go ahead and google Gene Rubin Audio, read the forums, read the reviews, read my ebay feedback, you are dealing with the best customer service in the audio businessFranchised dealer for: LFD, Rega, Heed, Palmer, Pure Fidelity, Sutherland, Graham Speakers, Fyne Audio, Belles, Exposure, Aurender, Hana, Koetsu, Ortofon, Croft, Harbeth, Spendor, Clearaudio, Dynavector, Quadraspire, Chord Company, Audience, Audio Desk Systeme, Creek, Milty, KAB, Q-UP, Furutech, Musical Surroundings, and more.

A Rare Find! One Owner Naim Audio ARO Tonearm, Naim Hi Cap, and Naim Prefix This comes as a trade-in on a new LP playback system. This is a one-owner Naim ARO tonearm in great shape but has some scratch marks on the mounting base. Also included is an Olive Naim Hi Cap, and a Naim Prefix K (for MC) with ARO connector. Also included is a quality 4 pin DIN to RCA interconnect to connect from the Hi Cap to any preamp/amp with RCA inputs. Hi Cap is 120 volts but can be changed to 240v. The Prefix doesnt care what voltage you use. This had been all mounted on a Pink Triangle Anniversary of which I have also listed on ebay. Buy with confidence from one of the USAs longest existing, most knowledgeable audio dealers: Gene Rubin Audio Established way back in 1979! Go ahead and google Gene Rubin Audio, read the forums, read the reviews, read my ebay feedback, you are dealing with the best customer service in the audio businessFranchised dealer for: LFD, Rega, Heed, Palmer, Pure Fidelity, Sutherland, Graham Speakers, Fyne Audio, Belles, Exposure, Aurender, Hana, Koetsu, Ortofon, Croft, Harbeth, Spendor, Clearaudio, Dynavector, Quadraspire, Chord Company, Audience, Audio Desk Systeme, Creek, Milty, KAB, Q-UP, Furutech, Musical Surroundings, and more.

NAIM AUDIO ARO TONEARM classic unipivot design with LINN LP12 ARMBOARD + cable just as picturedno hanging bias weightvery tidy examplethis was an employee built tonearm( always the best care taken )and shows the name Sandra instead of a standard serial numberit comes with the correct loom and plugs and arm boardno other parts included

In excellent condition as per photos. Complete with arm, arm board, arm collar, pin spanners, pillar/bearing assembly, counterweight, arm rest, fingerlift, original box, owners manual, spirit level, bias hanger and weight. PLEASE NOTE THAT THIS LISTING IS FOR THE TONEARM ONLY (TURNTABLE AND CARTRIDGE NOT INCLUDED). Please note that this arm is also listed on FB on Naim related groups.

In excellent condition as per photos. Complete with arm, arm board, arm collar, pin spanners, pillar/bearing assembly, counterweight, arm rest, fingerlift, original box, owners manual, spirit level, bias hanger and weight. PLEASE NOTE THAT THIS LISTING IS FOR THE TONEARM ONLY (TURNTABLE AND CARTRIDGE NOT INCLUDED). Please note that this arm is also listed on FB on Naim related groups.

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Naim Aro Tonearm cable. No longer needed as an internal phono stage is being used No rca plugs What is in the pic is what you will receive High quality cable and the fixtures are very rare Bargain Free p p

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Naim Aro Tonearm with Linn LP12 Armboard PRE-OWNED SERIAL NUMBER 6159 HERE IS A MINT & COMPLETE LEGENDARY NAIM ARO TONEARM THIS UNIT HAS SEEN RELATIVELY LITTLE USE AS IT HAS BEEN IN STORAGE FOR MANY YEARS THE HEADSHELL IS UNMARKED, AS IS THE MAIN BODY OF THE ARM & COUNTERWEIGHT THE ARM PASSES AN ELECTRICAL CONTINUITY TEST & CABLING APPEARS SOUND HERE IS A GREAT OPERTUNITY ONE ONE THESE FANTASTIC TONEARMS AS IN AS NEW CONDITION MAINLAND UK SHIPPING £10.00

Naim Aro Tonearm. Only 1500 in the world. Excellent working condition. Hasnt had much use. Comes with original cable & Linn Armboard. Doesnt come in original box but will be packed well. Will come with insurance.

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Linn tonearm variant.In superb condition, never been fitted. I removed from sealed packaging to photograph.Will be shipped in original box.

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Naim Aro tonearm cable with BNC connectors.Superb condition - I dont think this has ever been used.

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Naim Aro Tonearm Cartridge Mounting Screw Set (Ultra Light Weight Nylon) The Picture shows Exactly what you are Buying & will Receive.The Headshell - Cartridge Mounting Kits Include the Parts Listed Below.2 x M2.5x4 mm Nylon 66 Screws.2 x M2.5x6 mm Nylon 66 Screws.2 x M2.5x8 mm Nylon 66 Screws.2 x M2.5x10 mm Nylon 66 Screws.2 x M2.5x12 mm Nylon 66 Screws.2 x M2.5x15 mm Nylon 66 Screws.2 x M2.5x18 mm Nylon 66 Screws.2 x M2.5x20 mm Nylon 66 Screws.16 x M2.5 Nylon 66 Fixing Nuts.16 x Nylon Washers.They can be Use with the Following Makes Of Tonearm: SME (all Models) Linn (all Models) Thorens (all Models) Grace (all Models) Rega (all Models) Acos Lustre (all Models) Roksan (all Models) ARB (all Models) Origin Live (all Models) Inspire Hi Fi (all Models) Mission (all Models) Hadcock (all Models) Koetsu (all Models) ADC (all Models) Jelco (all Models) Naim (all Models) Goldring (all Models) Acoustic Research (all Models) Townsend (all Models) Michell (all Models) Dual (all Models) Pro-Ject (all Models) They Can Also Be Used With The Following Makes Of Turntable: Thorens (all Models) Technics (all Models) Audio Technica (all Models) Rotel (all Models) Pioneer (all Models) Sony (all Models) Toshiba (all Models) Yamaha (all Models) Sansui (all Models) Luxman (all Models) Goldring (All Modes) Dual (All Models) Denon (All Models) Hitachi (All Models) Trio (All Models) Kenwood (All Models) Acoustic Research (All Models) A&R (All Models) + Many Other Makes.These are by far the Best Choice for use with MC Moving Coil Cartridges.They can be used with almost all MM Moving Magnet Cartridges as well.Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Naim Aro tonearm cable with BNC connectors.Excellent condition.

Bias weight for the Naim Aro Tonearm. This Bias / anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *