Thoma Frequenzmesser quarz, digital,10Hz-100 Hz, 5 Pins, mit einem Verbindungskabel.Passend für Nagra Systeme.Kabellänge: 50 cm Der Messer ist sehr gut erhalten. Vielleicht sind auch meine anderen Auktionen interessant - bitte vorbeischauen. Bei evtl. mehreren Ersteigerungen nur 1 x Versandkosten. Alle Bilder sind ein Teil der Produktbeschreibung - bitte genau anschauen. Bei Fragen einfach mailen - ich beantworte sie gerne. Dies ist ein Privatverkauf, deshalb keine Garantie oder Rücknahme. Bitte beachten Sie: Zahlung innerhalb von 7 Werktagen erforderlich. Ich versende alle Produkte versichert - bei gewünschtem unversicherten Versand keine Haftung des Verkäufers. Bei Internationalem Versand bitte Kosten erfragen. Alle Artikel aus Nichtraucher-Haushalt. Mit Abgabe eines Gebotes werden diese Bedingungen anerkannt.

Ich biete einen gebrauchten, funktionstchtigen Nagra-LB tragbaren Digitalrecorder zum Kauf an. Der Recorder ist gebraucht und weist dementsprechend Gebrauchsspuren auf. Das Gert stammt aus einem Nachlass. Nachfolgend ein Auszug aus der Website des Herstellers: Manufactured from 2008 to 2014 Two channel Universal digital audio recorder The NAGRA LB has been designed as the natural successor to the ARES-C and the ARES-BB+ recorders, and it is specifically designed for broadcast applications although naturally it is also very well suited to a multitude of other recording applications. Similar in size to the ARES-BB+ the LB offers communication possibilities never before seen in a professional broadcast recorder. Key features 2 channels 24 bit, 192 kHz AD / DAMPEG-1 layer II MP-3 compressionCompact flash and internal 2GB flash memoryOn-board graphic audio editorUSB 2.0 and Ethernet communication portsInternal speaker Pre-recording bufferDual colour screens and Bluetooth communicationLightweight and battery operated Audio inputs It offers two analogue audio inputs and a single stereo digital input. The Nagra LB will record in either PCM linear audio or in MPEG-1 layer II or MP-3 compressed audio formats. The inputs are equipped with traditional NAGRA microphone pre-amplifiers for dynamic and phantom +48V microphones. The LINE input will accept up to +24dB. The audio levels and current operating mode of the recorder are shown on the colour display mounted on the front of the unit. Above the potentiometers three leds are fitted to indicate audio levels as on the ARES-PII+, BB+ and Nagra VI. The front display becomes inactive when the editor on the top panel of the machine is in use. The built-in microphone can also be seen in the top left corner of the photograph. Media The Nagra LB is fitted with an internal 2GB NAND flash memory which serves two important roles. Firstly as a back-up media should the extractable compact flash card be full, but also as a spontaneous memory for recording while the extractable card is changed. Simply pressing the Hot Swap button next to the slot will open a 30 second window allowing the inserted card to be replaced even while the recorder is actually recording. Editing and communication The top of the LB is equipped with a built-in audio editing system with its own dedicated colour display. It allows editing of broadcast wave MPEG 1 layer II files and 16 bit PCM files at 32 and 48 kHz. Thus in-the-field editing i spossible and gives a graphic waveform display. Once the editing of the audio material is complete, the file can be transmitted to the studio either over IP (through the ethernet connection using the File Transfer Protocol FTP connection) or via a GSM phone through the Bluetooth option. Naturally the USB port also serves as a generic drive when connected to a computer to file transfer can also be done this way. Removal of the compact flash card is a final possibility for removing the audio from the recorder. The HOST USB port can also be used for an external memory stick for file transfer. The LB is powered by 8 AA batteries in a removable battery compartment. This may be fitted with rechargeable cells if required, which are in turn charged through the Hirose connector on the battery box body using the built-in charger circuit. Technical specifications RECORDING Internal storage:2 GB NAND Flash memoryRemovable media:Compact Flash type II / III (Hot Swappable)Disk format:FAT 16 / 32Recording Method:Linear digital PCM, MPEG 1 layer 2 or MP-3File type:16 / 24 bit Broadcast Wave File BWF (WAV)A/D & D/A conversion:24 Bit Sigma DeltaBit rates:32 kbits/s up to 384 kbits/secTracks:2 individualSampling Rate:44.1, 48 kHz, 88.2, 96 and 192kHzRecording capacity:1hr 24 bit 48 kHz per GB of disk / memoryPre-recording buffer:Programmable (Maximum 3 seconds)Display:2 x Colour LCDLevel meters:On colour display AND by LED INPUTS Digital input:XLR 3-poleAnalogue inputs:2 x XLR Microphone (Dynamic, +48V Phantom) / lineMicrophone input sensitivity:2 and 15 mV/Pa selectableLimiters:On microphone inputsLine input sensitivity:Adjustable from -6 dBm up to +24 dBm for 0 dBFS recordingTHD at 1 kHz:<0.1% Mic, <0.01% line (measured on AES out)Frequency response:Mic, 10Hz 48 kHz 0.5 dB, Line 0.2 dB (measured on AES out)Signal-to-noise ratio:>100 dBInput level adjustment range:50 dB Mic and from -6 to +24 dB LineInput filters:LFA (with vortex filtering)Internal microphone:Electret on the front panel OUTPUTS Analogue line output:XLR 4.4V max (+15 dBm)Digital output:XLR AES-3 (24 bit or 16 bit)Headphones:Stereo 6.3mm () Jack 50 Internal speaker:0.2W OTHER USB Host:USB 2.0 connector type AUSB Device:USB 2.0 connector type BM/S Decoder:SwitchableEthernet:RJ 45 GENERAL Dimensions:175 x 65 x 185mm (W x H x D) (Incl. battery box)Weight:1.4 kg (3 lbs) (Incl. batteries)Power supply:External 9 15VPower Consumption:Approximately 2W (160mA on 12V)Charge time:Approximately 3 hours (with NimH cells)Battery life:8 hours (8 x NiMh 2500 mAh) Record @ 24 bits 48 kHz with 2 x phantom +48V (2 x 4 mA), continuous recording. Between 5 and 5 1/2 hours with 8 x LR6 dry alkaline cells.Relative humidity:From 10% to 99% (non condensing)