Here are some specifications for the NAD stereo amplifier 3220PE: Power output: 20 watts per channel into 8 (stereo) Frequency response: 10 Hz to 70 kHz Total harmonic distortion: 0.02% The 3220PE is the final version of the NAD 3020, with the same basic circuit and PE power supply. Some say the 3220PE is better than the 3020, and that its better for longevity to remove the power envelope circuit. *The included 220V to 117V plug converter works fine in US.

This Nad 3220PE Stereo Integrated Amplifier is a gem for any music lover. With its sleek design and high-quality sound, its sure to enhance your listening experience. The brand, NAD, is known for producing top-of-the-line audio equipment, and this amplifier is no exception. The model is available in various types, making it customizable to your specific needs. The amplifier is in mint condition and comes in its original box, ready to be used right out of the package. Whether youre a music enthusiast or simply looking to upgrade your home audio system, this Nad 3220PE Stereo Integrated Amplifier is the perfect addition.

Nad 3220PE Stereo Integrated Amplifier - Excellent Condition. Very good condition. Tested and reviewed. See pictures for details and bid accordingly. 30 day warranty Specifications Power output: 25 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Input sensitivity: 2.5mV (MM), 200mV (line) Signal to noise ratio: 76dB (MM), 85dB (line) Speaker load impedance: 4? (minimum) Dimensions: 420 x 80 x 250mm Weight: 5kg Year: 1987 Thank you for shopping Renewed Hearts

This is a service only listing for any parts I have plus the labor required to Restore and Re Cap an NAD 3020 or similar 3020_like amplifier that YOU send to me including the 3020A, 3020B, 3020i, 3020e, 3220PE, 3225PE, 302, 312 and Receivers including the 7020i, 7020e, 7220PE, 7225PE, and 701. The shipping charge is for the return trip back to you in the same box sent. Restore - Clean and inspect the inside of the unit. Repair any issues discovered or mentioned by the buyer. Deoxit switches and potentiometers. Resolder RCA, DIN, and Headphone jacks as needed to reseat and resecure them, along with any other questionable solder joints. Re Cap - Replace the Electrolytic Capacitors in the Power Supplies, Amplifier sections, and Tuner Audio sections. Ill upgrade the audio caps with nichicon, ELNA, Rubycon, and Panasonic audio grades while preferring 105C and/or higher voltage rated caps for the power supplies. I can also install any capacitors that you provide as desired. Note that replacing the power switch is an additional $35. If you hear a sizzling sound as you slowly push it on or off, then its time to replace it. International units at 220VAC are no problem. Please allow 7-10 days from receipt to return ship so that I have time to listen and confirm proper operation. The 30 day handling time is intended to include your ship time to me as well. Feel free to message me with any questions or to inquire about the repair and/or recap of other models. If you see a Preamp, Integrated Amp or Power Amplifier on eBay (for Parts / Not Working or Otherwise) that youd like to Buy and have repaired and/or recapped, then perhaps you can save on shipping by having it sent directly to me. Please message me first.

This is a diagnostic only listing for an NAD 3020 or similar 3020_like amplifier that YOU send to me including the 3020A, 3020B, 3020i, 3020e, 3220PE, 3225PE, 302, 312 and Receivers including the 7020i, 7020e, 7220PE, 7225PE, and 701. The shipping charge is for the return trip back to you in the same box sent. International units at 220VAC are no problem. Please allow 7-10 days from receipt to return ship so that I have time to listen and confirm proper operation. The 30 day handling time is intended to include your ship time to me as well. Feel free to message me with any questions or to inquire about the repair and/or recap of other models.

This is a service only listing for any parts I have plus the labor required to Restore and Re Cap an NAD 3020 or similar 3020_like amplifier that YOU send to me including the 3020A, 3020B, 3020i, 3020e, 3220PE, 3225PE, 302, 312 and Receivers including the 7020i, 7020e, 7220PE, 7225PE, and 701. The shipping charge is for the return trip back to you in the same box sent. Restore - Clean and inspect the inside of the unit. Repair any issues discovered or mentioned by the buyer. Deoxit switches and potentiometers. Resolder RCA, DIN, and Headphone jacks as needed to reseat and resecure them, along with any other questionable solder joints. Re Cap - Replace the Electrolytic Capacitors in the Power Supplies, Amplifier sections, and Tuner Audio sections. Ill upgrade the audio caps with nichicon, ELNA, Rubycon, and Panasonic audio grades while preferring 105C and/or higher voltage rated caps for the power supplies. I can also install any capacitors that you provide as desired. Note that replacing the power switch is an additional $35. If you hear a sizzling sound as you slowly push it on or off, then its time to replace it. International units at 220VAC are no problem. Please allow 7-10 days from receipt to return ship so that I have time to listen and confirm proper operation. The 30 day handling time is intended to include your ship time to me as well. Feel free to message me with any questions or to inquire about the repair and/or recap of other models. If you see a Preamp, Integrated Amp or Power Amplifier on eBay (for Parts / Not Working or Otherwise) that youd like to Buy and have repaired and/or recapped, then perhaps you can save on shipping by having it sent directly to me. Please message me first.

This unit was in need of a new Power Switch and a new set of Muting FETs. It is otherwise all original except as upgraded below; I have updated the mute ON/OFF circuitry to match that of the 3225PE. See last photo. This allowed me to replace the original 3 Amp Power switch with a more robust 7 Amp switch that should last forever. I have upgraded all of the Electrolytic Capacitors. The Power Supply caps are nichicon, Chemicon, and Panasonic. The Phono Preamp and Control Preamp audio caps are ELNA. The Phono Input coupling caps are ELNA SILMIC II Bipolar. The Power Amp caps are nichicon Gold. For added versatility, I have repurposed the (fixed line level) Tape Output RCA Jacks to be the (variable level) Preamp Outputs suitable for a powered Subwoofer, external Power Amp, etc. They are equivalent to the Preamp Outputs on the 3225PE which allows this unit to be used as a Preamp only. Cosmetically, this unit is in great shape inside and out except for a bunch of marks on the top/side cover. Please see photos. Feel free to message me with any questions, corrections, comments, etc. ******* Chapter Two ******* Whenever I acquire an NAD 3220PE with all of the original Power Amp transistors intact, I prefer to preserve and protect them by removing two fuses to disable the PE Supply, effectively re-configuring the unit as a 3020e. This reduces the Main Rails to 60V and more accurately emulates the operation and performance of the iconic 3020 Power Amp section while also staying within the specified safe area of the output transistors, making them less likely to fail. While this does reduce the specified IHF Dynamic Power, I have compensated somewhat on this unit by Beefing_Up the RMS Performance with upgraded Main Caps, going up from 4700uf to 6800uf Chemicon. Ill also be happy to reinstall the fuses on request.

Working but speaker channel on rear right is failing Easy fix for someone who knows how.

This is a service only listing for any parts I have plus the labor required to Restore and Re Cap an NAD 3020 or similar 3020_like amplifier that YOU send to me including the 3020A, 3020B, 3020i, 3020e, 3220PE, 3225PE, 302, 312 and Receivers including the 7020i, 7020e, 7220PE, 7225PE, and 701. The shipping charge is for the return trip back to you in the same box sent. Restore - Clean and inspect the inside of the unit. Repair any issues discovered or mentioned by the buyer. Deoxit switches and potentiometers. Resolder RCA, DIN, and Headphone jacks to reseat and resecure them, along with any other questionable solder joints. Re Cap - Replace the Electrolytic Capacitors in the Power Supplies, Amplifier sections, and Tuner Audio sections. Ill upgrade the audio caps with nichicon, ELNA, Rubycon, and Panasonic audio grades while preferring 105C and/or higher voltage rated caps for the power supplies. I can also install any capacitors that you provide as desired. Note that replacing the power switch is an additional $35. If you hear a sizzling sound as you slowly push it on or off, then its time to replace it. International units at 220VAC are no problem. Please allow 7-10 days from receipt to return ship so that I have time to listen and confirm proper operation. The 30 day handling time is intended to include your ship time to me as well. Feel free to message me with any questions or to inquire about the repair and/or recap of other models. If you see a Preamp, Integrated Amp or Power Amplifier on eBay (for Parts / Not Working or Otherwise) that youd like to Buy and have repaired and/or recapped, then perhaps you can save on shipping by having it sent directly to me. Please message me first.

Whenever I manage to acquire an NAD 3220PE with all of the original transistors intact, I prefer to preserve and protect the Driver and Output Transistors by disabling the PE Supply, effectively re-configuring the unit as a 3020e. This more accurately emulates the operation and performance of the iconic 3020 Power Amp section while also staying within the specified safe area of the output transistors, making them less likely to fail. While this does reduce the specified IHF Dynamic Power, I have compensated somewhat by Beefing_Up the RMS Performance with upgraded Main Caps, going up from 4700uf to 6800uf nichicon FW Gold. I have upgraded all of the other Electrolytic Capacitors as well. The Power Supply caps are nichicon, Rubycon, Chemicon, and Panasonic. The Phono Preamp audio coupling caps are nichicon MUSE Bipolar. The Control and Power Amp audio coupling caps are nichicon Fine Gold. It sounds delicious! For added versatility, I have repurposed the (fixed line level) Tape Output RCA Jacks to be the (variable level) Preamp Outputs suitable for a powered Subwoofer, external Power Amp, etc. They are equivalent to the Preamp Outputs on the 3225PE which allows this unit to be used as a Preamp only. Cosmetically, this unit is in great shape inside and out except for a bunch of scratches on the top/side cover. Please see photos. Feel free to message me with any questions, corrections, comments, etc.

Vintage NAD 3220PE Stereo Amplifier Power Envelope Collectible Audio Equipment.

NAD 3220PE Integrated Amplifier in fully working order. A lovely clean example of a great little amp closely linked to the legendary NAD 3220. It shows some signs of previous use such as light scuffs, marks and scratches, mainly to the top lid, as expected with any used item (see photos). Some of the print surrounding the volume knob has also been worn off. Thoroughly cleaned inside and out prior to sale with all of the pots and switches cleaned with contact cleaner, so its crackle free and sounds fantastic! It has what I have come to refer to as the NAD Welcome Noise which is a low frequency hum which lasts about a second when the amp is powered on. Very typical with NAD amplifiers and well documented online. After that it works flawlessly with no further noises or issues. Inputs include: MM Phono, CD/AUX, Tuner and Tape. Includes the pre-fitted power lead, and original owners manual. No other accessories are included! Specifications: Power output: 25 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Input sensitivity: 2.5mV (MM), 200mV (line) Signal to noise ratio: 76dB (MM), 85dB (line) Speaker load impedance: 4? (minimum) Dimensions: 420 x 80 x 250mm Weight: 5kg Year: 1987 Normal 0 false false false EN-GB X-NONE X-NONE Note: I discreetly security seal and mark my electronic devices to prevent against eBay fraud, as well as record all serial numbers! These security features do not effect the operation of the devices in any way. Postage is via UPS tracked with insurance, hence the postage costs.

NAD 3020E 3220PE Integrated Amplifiers Original instructions Manual

NAD 3020E 3220PE Integrated Amplifiers Original instructions Manual

NAD 3020E 3220PE Integrated Amplifiers Original instructions Manual

NAD 3020E 3220PE Integrated Amplifiers Original instructions Manual

NAD 3020E 3220PE Integrated Amplifiers Original instructions Manual